ITrigue L3800 - Where do I get extension cables for the left & right speaker ? HELP !

@ reader : I have already contacted Creative Labs themselves but they unfortunately do not offer any extension cables that run between the left or right speaker and the sub-woofer. And since the connection into the sub is a weird looking '3 pins stacked on eachother' type, I am wondering if anyone has seen extension cables for connections like these.
I am grateful for any help on the issue (adresses, weblinks etc.), because it is really bothering me and the way I want to set up the system in my living room !
Have a great day !

OMS. If you can still find it. try searching for Opcode OMS (open music system) You need it to run usb midi interfaces in OS9. Good luck, I'd seriously consider getting Logic express.

Similar Messages

Re: Where to get a cable for the 6230i

hiya i have got a 6230i and was wondering where i can get a usb cable from?Message Edited by ajak on 19-Jun-2006
09:57 AM

Depends on where in the world you are, unless you buy from a web retailer such as Expansys:
http://www.expansys.com

The MID-7604 puts out a lot of noise, where can I get isolated cables for it?

I'm using a MID-7604 stepper motor driver. I'd like to reduce the ground loop noise in the system that I am measuring on my PXI-5152 (through a series of transducers, etc.) by using an optical or transformer isolator for the 68 pin VHDCI cable that connects the motor driver to the computer. Does such a thing exist or are there other methods to mitigate the noise? I'd prefer to have the MID-7604 and the computer connected to the same circuit/I don't really want to buy a gigantic isolation transformer/surge protector just to plug in the MID-7604.
Solved!
Go to Solution.

OlliesCamel,
The devices I'm using are PXI-5152 for signal acquisition, TEGAM 4040B for amplification, MID-7604 to drive stepper motors (which have specifications shown here http://www.sherline.com/stepspec2.pdf) to turn a Sherline rotational stage. The transducers are both Harisonic I30508T 5 MHz 3.5" focus transducers.
I have scanned in a drawing I made up of how everything is physically connected entitled Electrical connections.PDF. Also, the noise I am referring to is the noise that is shown in picture noiseMID7604.jpg. (It is labeled)
For the initial laser noise I'm getting an optically isolated RS232 which should fix that problem. On the MID-7604/7602 stepper power motor drive user guide and specifications it shows on page 13 that a wire should go from the 3 position to the case for grounding. It also shows that it seems to be attached to the shield of the shielded wire. Is this necessary as long as I have the ground connected to the case of the motor or? The way I have it now I just have a separate wire in the bundled/shielded cable that is going to the case but it isn't connected to the shielding itself.
The settings for the amplifier and the PXI are for 1 M ohm impedance.
As you can see, my signals don't have a very large SNR, so any sort of motor noise is problematic, particularly since the noise I've shown doesn't stay in the same place during the test. It tends to move around/be on top of my signals at random times even though it doesn't show that in this particular picture. It is problematic since I'm taking many measurements (20,480 acoustic signals per scan, etc.).
I've tried averaging (256 times) and filtering (10 MHz low pass filter is the lowest I can go), however, the noise still persists a bit since it happens to somewhat fall under the same frequencies, etc. The averaging does help, but I'd like to run the test faster and so eliminating that noise would help me in that regard.
Attachments:
Electrical connections.PDF ‏418 KB
noiseMID7604.jpg ‏128 KB

Where can I get replacement screws for the bottom of my MacBook Pro?

I have a late 2011 13 inch MacBook Pro. I recently upgraded it from the stock 500 gigabyte 5400 RPM hard drive to a 750 gigabyte 7200 RPM Seagate Momentus XT Solid State Hybrd drive. When I was putting the screws back in the bottom case I lost one of the small screws. Now the bottom case of my MacBook is little loose due to the missing screw. Where can I get a replacement screw?

PowerBook Medic has screw sets:
http://www.powerbookmedic.com/xcart1/_search.php?is_hc=Y&mode=search&q=screws
iFixit:
http://www.ifixit.com/MacBook-Parts/MacBook-Screw-Set/IF186-027
eBay:
http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1313&_nkw=macbook+screw+set

HT5554 where can i get a simcard for the iphone 3

i have a iphone but i dont have the sim card where can i get it

Call any carriers or go to any mobile shops to get SIM. Do a search first for the best carrier plan tailored to your needs.

Does anyone know where I can get Operating Instructions for the Sony BVW-75 Betacam SP?

I have been trying without success to find Operating Instructions for the Sony BVW-75 Betacam SP I just bought. Does anyone know where I can get it?

Thank you for trying to help. All of those links are for the product brochure, service/maintenance manual, or other products. I have spent several hours following Google search results and eBay searches with no luck. That's why I am reaching out to the technical community to see if someone has an instruction manual somewhere in the back room of their studio.

Special extension cable for one front speaker of T6100 System

Hello,
i`ve bought an T600 5.1 speaker system recently.
Because i would like to use it as a surround system in my room (about 5x3 metres) i mounted it on the wall.
Now i`ve the problem that ALL cables are far to short (also the front speaker cables) to attach them to the subwoofer (without extension i would have to put the subwoofer on the desk to connect one front box correctly).
But the real problem is that one front speaker uses a different cable than the other one`s (a proprietary Creative cable, it has 9 pins and looks like PS/2 but is different) and i don`t know where to get it from because in normal shops you won`t get it.
The other boxes use a cinch cable so i know where to get them from.
I`ve already contacted Creative but they say that they are not able to send me such a cable because it`s not available for them as replacement and also not in their store.
I`ve also seen another thread here like this one but the problem hasn`t been solved there.
It would be very great if you can help me !
Thank you very much !
Greetings,
Thomas
Message Edited by Thomas233 on 04-10-2007 07:40 PM
Message Edited by Thomas233 on 04-10-2007 08:56 PM

I have been emailing Creative about this issue (as I have been experiencing the same problem) for the last 3 weeks, and each time I got a response I was given a useless non-answer, or they would use it as an opportunity to plug their own products, or I was pointed towards paying for their customer service line. I became brain-meltingly irritated with this and resigned to calling the helpline number, but the telephone number provided on the website is about 400 digits long and looks like it's got an international dialling code in front of it- and it's not one I'm familiar with. I tried omitting individual digits of it, or sets of digits with every combination I could think of, but the phone kept failing to recognise it as a number. Is it that hard to post a normal-looking telephone number on a website so idiots like me don't want to set fire to themselves in fits of angered frustration?
I can't find anything on the internet about this and I'm amazed that more people don't seem to have this problem - the Digital Din connector & lead for the front-right speaker is far too short and after 3 weeks of trying to squeeze an answer out of creative, they finally informed me that they don't stock them and that 'it might be sold in
electrical store but it may or may not work.'
Cheers.

Getting fan Noise Bellow the left

Please Solve my Problems,, Im Getting Fan Noise Bellow the Left Side Speaker & Im Put Applecare protection plane , they mentioned toll free number India 1800 4250 744 or 80 4140 9000 Monday - friday 8 am - 8pm , saturday 8am - 2.30pm indian time zone
But if i call now they saying to mail apple care,,, then why they mentioned toll free even i registerd to apple supportexpress lane also,,, they send this mail.. but still no call from them Im very upset
Dear ARUN,
Thank you for contacting Apple. We have scheduled a phone call regarding case number 319588735. An Apple technical support Advisor will call you on June 4 at about 8:45 a.m. Pacific.
The phone number you provided for this phone call is 988-488-7219. Please visit your case information page if you would like to review this case, reschedule your call about this case, or change the phone number. We look forward to speaking with you and resolving the issue.
If you no longer require assistance, you may cancel the call on the case information page.
If you use a calendar application, such as iCal, you may place the phone call appointment in your calendar simply by clicking the attached calendar file.
You may also call Apple at 800-APL-CARE (or 800-MY-IPHONE for iPhone) about this case. Please have your case number handy.
Sincerely,
Apple Support
apple.com/support
P.S. Your feedback is very important to us. If you have suggestions for improving the support experience, please let us know.

Thank you for contacting Apple. We have scheduled a phone call regarding case number 319588735. An Apple technical support Advisor will call you on June 4 at about 8:45 a.m. Pacific.
Here in Pacific Time it is currently June 3 about 8:43 p.m. Relax they will call you in 12 hours from now.

Where can i get power cable?

Hi, i was wondering if there was anyway i could purchase a power cable for the Creative Labs 5.1 5300 sound system. I only require the power cable to the subwoofer as i have lost mine, is there anyway i can get hold of a new one ?I do live in the UK so if anyone knows of any online shops that do sell them i would be grateful!
:smileyvery-happy: Thanks, Tom

i do mean the power cable, that goes into the socket in the wall

Does anyone know where I can get a driver for a Kodak G610 easy share?

does anyone know where I can get a driver for a Kodak G610 easy share? tried the Kodak site but the software doesnt appear to work

There is no longer any support from Kodak for their EasyShare cameras on Mac OS X.
If you connect your Camera via a USB cable, does iPhoto launch?
If iPhoto doesn't launch automatically, try launching iPhoto first,then plug your camera in via connected USB cable that came with your camera.
If iPhoto doesn't open, have you tried using OS X Image Capture App to download your photos from your camera?

Optimum extension cabling for 20-inch Cinema

I need to add up to 2 meters distance between my MacPro and my 20 inch cinema display.
Is there an extension cable on the market that combines the video/firewire/USB cables and thereby accomodate the original cable, or
Do I have to extend these cables separately?
I ran across a 3 meter extension for the video cable? Can I just connect this up and expect it to work or will some kind of booster or other active component be required?
Can firewire & USB be extended 2-3 meters without ill effects?
My ideal is a 2 meter extender cable that mates perfectly with the 3 functions in the original cable, and you just connect it up and go ... is this possible?

Thanks. Your reference puts me on the right trail.
The cited reference seems to imply there's a non-active version of the apple combo cable that would work for the 20 inch cinema ... but I'll be damned if I can find it. Hopefully I can get some direct feedback from Geffen about it.
Careful measurements show that I really only need to extend my original combo cable 3 feet. Are you proposing that I just use one of their 'copper' DVI extension cables, a gender adapter and separately buy extensions for the USB and Firewire.

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

eBay or Craigslist would be the only choice.

Where can I get an update for Mac version of Creative suite 5.5 Design Standard?

Where can I get an update for Mac version of Creative suite 5.5 Design Standard?

Should all be in this one place.
Adobe - Creative Suite : For Macintosh
Gene

Where can I get an update for creative suite 5.5?

Where can I get an update for Creative suite 5.5?

You can get them through Help->Updates or Please refer following link for patcher downloads:
Product updates
Regards,
Ashutosh

Where can i get an ipad for free?

Where can i get an ipad for free?

Go to a store that offers store credit for refunds. Buy something that costs at least as much as an iPad. Return that item for store credit. Use your store credit to get an iPad.
Or do like everybody else who wants an iPad, and buy one.

ITrigue L3800 - Where do I get extension cables for the left & right speaker ? HELP !

Similar Messages

Maybe you are looking for