ITS 6.20 patch level 18 - dual host - Linux/Apache
Has anyone had to deal with the error message?
"Error in EnviInitialize, rc=1100"
This is diplayed when starting Apache. I suspect it's from the Wgate component that Apache is trying to start.
I setup a dual-host ITS, and it worked fine: I could access services on the application server(a 4.6C system), etc. Then I went through the process to have the two communicate via SNC.
And now, whenever I start Apache, I get this error message. Apache itself does start, but the wgate component doesn't appear to be running because I try and access an SAP service, I get an error message from Apache(page not found), instead of a error message from SAP.
Thx,
Kevin.
Hello Kevin,
yes, the error message is from the wgate.
This is a bootstrap issue in initializing the low-level functionality (reading ITS registry, tracing, etc). If this failes the wgate is not able to read its parameters or write traces, the only thing it can do is to write to the apache log (or stdout) and return to the server.
Since tracing (and other stuff) is not in-place there are no more hints to get to the cause.
What I can think of is:
syntax errors in (one of) the xml files (probably ItsRegistryWGATE.xml)
>> Please check your changes again (end tags and slashes), or take them out one by one.
Apache runtime user is changed and due to that the XML files are no longer accessable.
The rights of the XML files (ITS registry) are changed and no longer accessable.
Regards,
Fekke
Similar Messages
-
How to check my ITS patch level.
Hi everyone,
I need to check my ITS 6.20 patch level. Can someone tell me where can i find it? I am using a standalone ITS.
Thanks
Regards,
BryanHi
Check SAP Note Number: 366052 -
Kernel Patch Level for Linux RHEL 4
Hi every one,
Can any one pls tell me the latest Kernel patch level for OS Linux RHEL 4 .
or ls tell me whr can i find it .
Thanks,
Praveenhttp://service.sap.com/patches
--> Entry by Application Group
--> Additional Components
--> SAP Kernel
o SAP KERNEL 32-BIT
o SAP KERNEL 32-BIT UNICODE
o SAP KERNEL 64-BIT
o SAP KERNEL 64-BIT UNICODE
Choose your platform here.
SAP KERNEL 4.6D 32-BIT
SAP KERNEL 4.6D_EXT 32-BIT
SAP KERNEL 6.40 32-BIT
SAP KERNEL 7.00 32-BIT
Choose your release
Download the independent and the database dependent part.
Markus -
Hi Friends,
I need to upgrade patch level from 28 to 33 as recommended by SAP ,so how to upgrade the patch and what needs to be taken care
We need to apply because of we are facing some XSS VULNERABILITIES.
So kindly let me know what needs to be done (procedure)
Thanks in advance for the help,
Thanks&Regards,
RajHi,
Please refer to ITS installation guide for patch installation process. Please note that these steps are for ITS 620.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b040d0f8-a9e9-2a10-5a9c-a25098f7e096
With Regards,
Saurabh -
Hi All,
I need to upgrade the patch level from 28 to33 according to SAP NOTE (1053737) so please let me know how to upgrade patch level on ITS and what is to be taken care while applying.
We need to apply because of some xss VULNERABILITY Attacks.
thanks in advance for the help,
Thanks&Regards,
RajHello Raj,
To upgrade from ITS 6.20 patch 28 to 33 you will need to download the ITS 6.20 patch 33 installation file from the SAP Marketplace.
You may want to back up the services, templates, and mimes directories, but only if you have made changes. The exception is that you do NOT want to use your older (patch 28) ../templates/webgui ../templates/system ../its/mimes/system ../its/mimes/webgui in your new Patch 33 installation.
Edgar -
Hi Friends,
Currently we are in production at PATCH LEVEL 47.
Recently we applied patch 47 TO 56 in development system
Please suggest me in the below mentioned point of view.
1) What are the major changes we need to observe or what are scenerio we need to test.
2) what would be disprency while running payroll process, reports, or feature like 40ack, 40ecc,,if any and all.
Please give some suggesition.
Thanks in advance
MVR
Edited by: MVRmvr on Aug 9, 2010 12:43 PMHi,
Check all the correction notes ( You can ask for a report from SAP)
Apply them and check fo the issues. Its a time consuming process and needs attention.
If there are any issues in notes raise a OSS immediately.
1. Check for primary requirements for which you need the change.
Be careful with Form16 - TAN Number based.
Check 80CCF, form 16 Services on portal, form 24.
2. Also test the existing functionalities.
Hope this helps.
Param -
BI Content patch level on BI system and source system
Hi all, hope you can help
our BI and ECC6 systems are separated. My question is, do we need to be on the same BI_CONT patch level in BI and ECC6? Our current patch level in BI is 7.0.3 level 9 and in ECC6 we have not loaded any patches, however we have BI content which was delivered with the install.
Regards
CharlPlan on applying the Linux and Solaris versions of all applications patches to the respective servers.
How To Apply a Patch in a Multi-Server Environment
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136342.1
Patches must always be applied in their entirety. If you apply a patch to update
your filesystem, you must also apply the corresponding database and generation
portions of the patch if they are included. When updating the filesystem in a
multi-server environment, you should apply the patch on all servers.
You can see what patches have been applied to which nodes in OAM on the Applied Patches page. Oracle will not advise you to have patch differences, otherwise supportability comes into question due to partial patch application. -
Kernel upgrade to patch level 196, ECC 5.0, MSCS resource issue.
Hi,
We have 3 system landscape DEV, QAS & PRD on win 2003, oracle 10G, ECC 5.0.
Our PRD system is on MSCS with CI on node A and DB on node B.
Recently I successfully upgrade kernel off DEV & QAS system to patch level 196 of stack 18.
When I tried to upgrade the kernel of PRD system one of the cluster resource drive (The drive contains the usr folder) is automatically moving from Node A to Node B and I got the error u201Capplication server shut downu201D. We donu2019t have additional application server in the landscape.
Please suggest the solution.
Regards,
RajeshHi Juan,
How are you? Thanks for your reply.
We are using ECC 5.0. I have found more errors in dev_w0 as follows,
ERROR => ShmCreate( ATTACH 62, 85588600) failed 1 [mpixx.c 843]
ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c 3556]
in_ThErrHandle: 1
ERROR => tskh_init: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9621]
Info for wp 0
stat = 4
reqtype = 1
act_reqtype = -1
rq_info = 0
tid = -1
mode = 255
len = -1
rq_id = 65535
rq_source = 255
last_tid = 0
last_mode = 0
int_checked_resource(RFC) = 0
ext_checked_resource(RFC) = 0
int_checked_resource(HTTP) = 0
ext_checked_resource(HTTP) = 0
report = > <
action = 0
tab_name = > <
LOCATION SAP-Server sapcigrp_ECP_00 on host sapeccprddb (wp 0)
ERROR tskh_init: DpInitMpi
TIME Sun Nov 16 05:13:07 2008
RELEASE 640
COMPONENT Taskhandler
VERSION 1
RC 17
MODULE thxxhead.c
LINE 9806
COUNTER 1
PfStatDisconnect: disconnect statistics
Entering TH_CALLHOOKS
ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
TrThHookFunc: called for WP dump
ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed hxxtool3.c 254]
Entering ThSetStatError
Entering ThReadDetachMode
call ThrShutDown (1)...
***LOG Q02=> wp_halt, WPStop (Workproc 0 4000) [dpnttool.c 357]
Please suggest the solution
Thanks & Regards,
Rajesh -
Hi Experts,
I need small information on JAVA Patch level.
Presently we are on Patch level 15 in portal system and latest patch available in market place is 19.
Please guide me which patch level can i go and apply.
Regards
JanThe best practice is to go with one step lesser than the highest patch available, because to get the fiexes to the problems with the highest patch will take some time and the 18 patch should have got the fixes by the time highest patch is released. and also you might get the possible issue with the patch 18 from the people who already adopted it or from the market place (you can get the report on impacts ) before proceeding to apply. The other point you need to consider is the patch 19 functionality and its immediate applicability as per your scenario.
Thank you,
Shyam -
Assign patch levels for component versions of system: Maintenance Optimizer
Hello,
I am trying to have Maintenance Optimizer check for what files I need to download. However, I get the following error:
Assign patch levels for component versions of system SXM.
I susepect that the problem really lies in the fact that the "SP Levels" in the "Software Components" tab is not populated in SMSY.
Does something read that information from the child system and populate the data automatically? This is a new system install, and perhaps a step was missed in solman.
Thanks,
JohnHi John,
MOPZ directs you to SAP Software Download Center in order to show you the lastest status and available packages.
If you are not seeing the packages perhaps you created you satellite system at solution manager pointing to the wrong product/version.
MOPZ is created to point you to the available Support Package Stacks for its products.
Normally one creates a system in solution manager defining it as an ECC server ( this does not have a download page for MOPZ ) when the correct assignment would be SAP ERP ( this last has a download page for MOPZ ).
If this is your case, you´ll need to redefine the satellite system again in our solution manager.
hope this helps.
Valdecir -
Updating db to new Patch level
Good Day
Experts:
Today I wanted to use a development db that had not yet been updated since the latest Patch Level was applied to the Server.
All was going well until the stopwatch down at the bottom of the screen started up. Shortly there after, the following message appeared:
"This entry already exists in the following table "Departments" CUFD
I also received the following message:
"This entry already exists in the following tables " " CUPC
A few days earlier development db's on the same Server were updated.
Has this happened to anyone else? I am not sure what this is/means or how to proceed. Any input/help is appeciated.
Thanks,
EJDi didn't update to patch 43 yet.
quite strange that you mentioned the CUPC Table - its the Upgrade Control table.
maybe some else tested it here ?
regards
David -
Diff Patch Level on External web and Source Server
Hi ,
Version - 11.5.10.2
We recently setup our external web server in DMZ on Linux while our source system
is running on Solaris.
We followed 238276.1 doc to migration the middle tier to linux. We were asked to check
both systems should have same Patch level.
I have doubts here
o Since we have only one DB Tier, and we copied APPL_TOP from Source solaris and
convert the files to linux. we installed IAS and 8.0.6 home from Universal installer
Is it possible to have diff patch level on both instances. as we have only DbTier
and the only way [ I know ] to check whether we have patch applied or not is
query to database or using OAM as it would show the same patch.
o if there is possibility to have diff. patch level then how can we detect this and what is the way to apply patches on one server [ Adadmin ? ]
o Can you please point me to any DOC which can give clarity how diff. type of patches
we can have in Apps.
Regards,
Jagjeet SinghPlan on applying the Linux and Solaris versions of all applications patches to the respective servers.
How To Apply a Patch in a Multi-Server Environment
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136342.1
Patches must always be applied in their entirety. If you apply a patch to update
your filesystem, you must also apply the corresponding database and generation
portions of the patch if they are included. When updating the filesystem in a
multi-server environment, you should apply the patch on all servers.
You can see what patches have been applied to which nodes in OAM on the Applied Patches page. Oracle will not advise you to have patch differences, otherwise supportability comes into question due to partial patch application. -
How and where to check Patch level in XI
Hi,
Can any one let me know how and where to check Patch level for XI systems.
Ex: 14SAPXIAFC17P_14.sca
Also pls provide me with the procedure for applying above patch.
ShavaliHi Shavali -
http://<host>:<j2ee_http_port>/sap/monitoring/ComponentInfo
also
http://<host>:<j2ee_http_port>/sap/monitoring/SystemInfo for core system info (J2EE or JVM patch level, etc.)
BTW, you need <i>SAP_J2EE_ADMIN</i> role for this.
Regards,
Jin -
Hi Friends
Where can i see DB2 Version and patch level on ECC 6.0?
For Windows Database : DB2 or DB6??
Patch level?
Thanks
srinivasHi Srinivas,
DB6 is a SAP abbreviation for "DB2 for Linux, Unix and Windows" .
The DB2 version and FP level of your database server can be found in SAP transaction ST04 or DBACOCKPIT.
In SM50 you can view the work process traces to display the server and client level
C Running with UTF-8 Unicode
C Running with CLI driver
C
C Wed Oct 21 17:03:27 2009
C DB2 client driver version '09.05.0001'
C Connected to DB2 server type 'DB2/LINUXX8664'
C Connected to DB2 version '09.05.0002'
If you need more detailed information you have to use "db2level" in a DB2 CLP window on the DB server.
Regards
Frank -
Hi All,
Currently we are on SPS 14 (Patch #7) for Java and Patch #3 for KMC. How to look for this info from portal? Now we are planning to apply SP stack 16. This will push up the current patch levels. Is there any way we can find the patch level info for SPS16?
Please suggest.
Regards,
Subashini.Hi Subhasini,
If you are using the EP in Netweaver 2004s or later, The portal version page under System Administration -> Support does not exist anymore.
Solution:
For finding out the version of installed products, launch the default page of the Web AS (http://<host>:<port>) and navigate to the "System Information" page. This page shows a table called "Software Components". For displaying the versions of all installed software and development components, click on the link "all components" in the upper right corner of this table.
With Regards,
Laksh.
Maybe you are looking for
-
Getting range of query result in 2004s
Hi, I'm trying to determine range of a result area in a 2004s query using the following code : Dim myrange As Range Set myrange = Run("BEXAnalyzer.xla!SAPBEXgetResultRangeByID", "ZSKMILESTONESTEST") I have also tried this using the technical ID of th
-
BI JDBC Connection For MSSQL 2005
Hi All, I am trying to establish an BI JDBC Connection with MSSQL 2005 Server. I follow the steps exactly mentioned in the guide but i was not successfull. I doubt the problem could be with the adapters and again downloaded a JAR file for MSSQL 2005
-
Accessing MySQL InnoDB tables via JDBC using Oracle SQL Developer
I had posted a problem in the Oracle SQL Developer forum with how that application (v1.1) accesses MySQL InnoDB tables and someone replied that the "[data migration] team created the integration with MySQL", so I am posting here in hopes of learning
-
I am trying to put a check box on a form that will allow an administrator to give a user a specific role. For some reason, my code isn't working. Can anyone tell me why this doesn't work? The first field works fine, if the person has the sponsored ro
-
I purchased Learn OS X and I have the payment receipt but I can't find the app to download it. Thanks.