ITS 64bit support

looking to clarify the SAP ITS roadmap...SAP is dropping reg maitenance for 6.2 32bit in 2009, when will 64 bit will still be supported to?
Edited by: jeff thurston on Jan 2, 2008 3:30 PM

Hi Jeff,
According to the SAP Note given below:
Note 325616 - ITS 6.20 System requirements
SAP ITS 6.20 on 64 bit is supported as off patch level 22, however please read the maintainence strategy in detail:
https://service.sap.com/~form/sapnet?_SHORTKEY=01200572170000061091&
According to
SAP Note 197746 - Maint. strategy: Internet Transaction Server (ITS)
Release 6.20 is supported "longterm". The date for end of support for release 6.20 depends on the maintenance deadlines for the SAP products which need the SAP ITS. As long as one of these products is supported, the ITS 6.20 will also be supported. Currently the product with the longest lifecycle is SAP ECC 5.0 (until 31st of March 2013).
For a formal confirmation from SAP , I suggest you open an OSS message and post your state ( ITS release versions etc) and ask them if ITS 64 bit's last date is 31st March 2013
Regards,
Siddhesh

Similar Messages

Skype wont open, saying its "not supported on this Aschitecture". How can I get it to work??

Skype wont open, saying its "not supported on this Aschitecture". How can I get it to work??
I have downloaded Skype from its main website for MAC, but still it says " can't open Skype. not supported on this Architecture" when i click on it. I don't know why it wont. This isn't an old Desktop Mac computer, and Skype downloaded with no problems on my Mac Lap top. So what's wrong this time?
Any suggestions would be helpful! Thanks!

Ahh, glad we got that figured out! You might want to make a note for any other problems you want to ask to post in the forum for Power PCs:
https://discussions.apple.com/community/desktop_computers/imac_powerpc
(you posted in the Intel iMac forum)

I'm having a ipod nano which vl b in rectangular shape of 2" and when i connect my iphone's earpods d control keys are not workin. may i know d reason y its nt supporting?

i'm having a ipod nano which vl b in rectangular shape of 2" and when i connect my iphone's earpods d control keys are not workin. may i know d reason y its nt supporting?

I can't tell which iPod nano model you are describing. The EarPods listing at the Apple Store
http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
Says (under Compatibility) that iPod nano 4th gen and later are supported ["Requires software version 1.0.3 for iPod nano (4th generation)"]. If your nano is 3rd gen or earlier, it will still work for audio, but some control buttons may not work.

I am trying to install final cut pro 6 onto my mac but a message keeps coming up saying its doesnt support a powerpc, anyone have any tips please?

I am trying to install final cut pro 6 onto my mac but a message keeps coming up saying its doesnt support a powerpc, anyone have any tips please?

If you have an Intel Mac and have recently upgraded to Lion or Mountain Lion; here is a post I made in another similar thread:
I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between Final Cut Pro or Lion/Mt. Lion;
3. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the screen from your other Mac to view and work FCP in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCP (such as FCP X) and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

I have broken my iphone5 and have an iphone 4. I have an adaptor and put my sim in my iphone 4 but it says its not supported what do i do?

I have broken my iphone 5 and have an iphone 4. I have an adaptor to put the sim in but it says its not supported on this phone. What can I do?

They might have one at the Apple Store but a better chance is to go buy your cell providers store.

I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?

I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?

iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming

I've just installed Mavericks on my Macbook Pro, which took forever to install, and everything appears to be fine except for iPhoto. When I try and open iPhoto I get a popup saying its not supported by this OS. Anyone have any ideas??? Help please.

I've just installed Mavericks on my Macbook Pro, which took forever to install, and everything appears to be fine except for iPhoto. When I try and open iPhoto I get a popup saying its not supported by this OS. Anyone have any ideas??? Help please.

Click App Store from your Apple menu  drop down menu then select Updates from the App Store menu bar.

If install CSM in VMware which windows2003 version(32/64bit) supported?

CISCO will release CSM version 3.2.1 to support VMware ESX Server 3.5 in July 2008.For the SW requirement, which windows 2003 version (32 or 64bit)support by CSM3.2.1? Thanks

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

64bit support for AIX5.1

Does tuxedo has 64bit support for AIX 5.1/5.2. Is there any document about that.
Thanks in advance.

Yes it does. We use 64bit tuxedo8.1 on AIX 5.2.
"zlldw" <[email protected]> wrote:
>
Does tuxedo has 64bit support for AIX 5.1/5.2. Is there any document
about that.
Thanks in advance.

Any NI news regarding Logic 64bit support?

Does anybody have information about an Native Instrument announcement what their plans are for native 64bit support in Logic 9.1? I cannot find anything on the web and I also heard that they didn't even have a booth at NAMM.

I did get a response on their forum. They said they're planning on a 64 bit version, but have no idea when it might be, which isn't very helpful. Their answer also made it sound like they don't think having a 64 bit version is that important, which gives me a bad feeling.
I let them know that they're not getting a dime from me for upgrades or new products until they support 64 bit. You're right, users definitely need to get in touch with them and let them know how important it is.
Here's the forum thread, contacting them directly as well is a good idea.
http://www.native-instruments.com/forum/showthread.php?t=101800

How to unlock iphone 3gs, its not supporting for other networks, can any bady help me...

Hi,
i am using Apple IPhone 3GS,... with Vodafone Service, in INDIA.
but now its not supporting for any other Service's,
can any bady tell me how to Unlock the Iphone...

Only the Carrier the phone is Locked to can Unlock it... you need to Contact the Carrier.

My iphone 5s wont charge it keeps saying that its not supported with this accessory. It was working just fine about 2 days ago

My iPhone 5s wont charge it keeps saying that its not supported with this accessory. It was working just fine about 2 days ago, what can i do?
This is the 4th charger I've bought, i don't want to keep wasting money on chargers anymore.

a_man_duh wrote:
My iPhone 5s wont charge it keeps saying that its not supported with this accessory. It was working just fine about 2 days ago, what can i do?
Take it into an Apple store and have it checked out.
This is the 4th charger I've bought, i don't want to keep wasting money on chargers anymore.
You shouldn't have bought any.
They are part of the 1 year standard warranty.
Take it into an Apple store for free replacement (if not user damaged).

Demand !!! Toshiba Please release 64bit Support for Toshiba Encore WT8-A32

Toshiba Please Please Release Support for 64bit for Toshiba Encore WT8-A32 as this device hardware supports 64bit
http://www.toshiba.com/us/tablets/encore/8/BWT8-A32
as details Provided on Intel's official page
http://ark.intel.com/products/76759/Intel-Atom-Processor-Z3740-2M-Cache-up-to-1_86-GHz
Intel® Atom® Processor Z3740 supports 64bit also, then please release 64bit Support
While other devices having same hardware supports 64Bit then why shouldn't Encore too?

... I found an Win10 Intel platform driver v1.14 on the Lenovo website for the Thinkpad 10 tablet. Doesn't look as a dedicated Win 10 driver to me as it was already released as an WIn 8.1 driver before. This works pretty nice with the Encore as the hardware components are very similar. I removed the audio and GFX section out of the config file before starting the setup procedure as I do not want to overwrite the Dolby audio driver from Toshiba and the already installed Win10 graphics driver I found on the downloadcenter.intel.com website. Everything works nice and without any problems. Nevertheless, I wouldn't recomment this approach for the standard users out there. You need to know what you ar doing with this driver-mixture I'm pretty sure that Toshiba will release an updated platform driver pretty soon - but I don't expect significant improvements to my current configuration ... Bernd

Unable to import RAW files from my 400D, (XTi) Even if its a supported cam

Hi,
I have been unable to upload RAW files from my Canon XTi, a.k.a. 400D. I know this camera is supported and I am running Mac OS X 10.4.8 on an Intel Core Duo Mac Book.
iPhoto had no issues with my previous Canon 350D raw files, yet its not working with the 400D. Is very likely a matter of installing an update, yet when i tried to install the ppl version it stated that this was not to be installed on this system. Would there be an update specific for Intel based machines to support the 400d?
Has anyone experienced this same issue that would like to share in their resolution? This would definetively be appreciated.
Happy Holidays and may you get the PS3 or something cool like that.

Dendrite
You need the Universal version of that update the ppc version won't work on your intel based machine:
http://www.apple.com/support/downloads/digitalcamerarawsupportupdate101universal .html
"This update improves RAW file format compatibility for the following digital SLR cameras:
-Canon Digital Rebel XTi / 400D / Kiss X Digital
-Nikon D80
-Pentax *ist DS"
Regards
TD

"you cannot open the application because its not supported on this type of mac" error

I've used this particular application since I bought my new iMac. Its an app downloaded from the Internet. I've tried to uninstall and download multiple times with no luck. Apple Support advised me to clear out my caches. I did. No luck. Apple Support had me create a "Test User" and the app worked. How do I get the app to open with my normal username?

sessions7 wrote:
I've used this particular application since I bought my new iMac.
Then it just started acting up? Did you change anything between then & when the app started acting up?
Trash the plist file, repair permissions and restart your computer. Problem resolved?

ITS 64bit support

Similar Messages

Maybe you are looking for