ITS - A Specific Requirement

Hi Experts,
We have a specific requirement.
Customer has a 3 Landscape System (ERP6.0).
As of Kernel 700, ITS is included by default in the System.
But customer does not want to use this System for ITS Functions
He wants to make a separate Server for ITS alone.
and the separate server to talk to the (existing)
3 Landscape ERP6.0 System.
1. Is this Possible ?
2. What happens to the ITS in the (existing )ERP6.0 System.?
( If yes to Question 1, can the existing ERP 6.0 system's ITS be disabled. )
Need your Advice.
Thanks & Regards,
Paguras

hi paguras
i don't know the help lines
but i know the senario
we have 4 dev ,4 qty , 4 prod
with that we want only 1 dev, 1 prd ,1 qty
by following the landscape by migrating the all different servers
we will go for migration
taking this as eg......
1 dev server divided into 4 dev
1 qty server divided into 4 dev
1 prd server divided into 4 dev
if u want logically
u can divided these servers
into different servers
but the whole dividing part defined under the landscape structure permission...
intially for it is there any there any migration is going or not. what i mean ...........

Similar Messages

Two Batch in a Single Bin_ Specific requirement

Dear Team,
Its a specific requirement.
A whole pallet of 1000 kg will be placed into a Single Bin. One Pallet may contain different batches totaling 1000 Kg
1. Batch 'A' - 1200 kg, Batch 'B' - 1400 Kg, Batch ' C' - 1600 Kg.
St Bin placement should be
Bin B1 - 1000 Kg of Batch 'A'
Bin B2 - 200 Kg of batch 'A' + 800 Kg of Batch 'B'
Bin B3 - 600 Kg of Batch 'B' + 400 Kg of Batch 'C'.
Could you please suggest how to configure such requiremnt?
Thanks a lot
Sam

Hi Madhu,
Thanks a lot for your valuable input
Current I have below settings
1. Putaway strat : P - St Unit Type
2. Mixed Storage: X
3. Add to Exist St. : X
4. SU Managment : Activated
5. SUT check : Active
6. Capacity method: 1 - as per max. weight
7. material master: Palletization maintained as 1000 kg per PAL
8. Bin: Bin type mainatined with max. weight 1000 kg
9. Define Strategy for Pallet is configured: Bin Section and assignement to SUT is done
STILL this config is NOT ABLE to fulfill my requiremnt
I tried permutation and combination..but failed.
Could anyone suggest a solution..?
Thanks
Sam
Edited by: Sameer99 on Apr 28, 2011 4:05 PM
Edited by: Sameer99 on Apr 28, 2011 4:07 PM
Edited by: Sameer99 on Apr 29, 2011 8:16 AM

What are the optimal hardware specification requirements for Adobe Photoshop CS6?

Greetings to the staff and users of this forum,
As the title clearly stipulates, the question is "What are the optimal hardware specification requirements for Adobe Photoshop CS6?".
Unfortunately, I am not satisfied with the specs specified on the website, as I believe they are far lesser than the specs needed to run the program at its full potential. This belief comes from my experience with the product Adobe Photoshop CS2 that I currently run on my computer. In effect, Ps CS2 cannot fully run without inducing time lags on my computer (i.e. when using 500 pix diameter smudge tool/ using liquify gallery), even though my specs are already higher than those specified for CS6 (mine are: Intel Core 2 Duo 6300 1.86 GHz, 3 GB RAM). I can assure you that I get those time lags even when almost in safe mode (only system main processes running) and that my computer is clean from any process/virus that could lower its performances.
I've been through two chat rooms and four telephone operators to always get the same answer: the specs on the website.
If any user here could provide me with proper higher specs, I would really be grateful.
Thanks,
phdwengr

This document looks at different workflows and gives recommendations. It should give you an idea of what's needed.
http://blogs.adobe.com/jnack/files/2012/07/CS6_hardware_recommendations.pdf

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

The iPhone warranty is not international and as you purchased in
Malaysia the warranty is only valid in Malaysia
You could try taking to an iPhone Authorised service provider
in India but there have been many similar posts to yours
and I am not aware of them assisting with an iPhone from
outside India

Specific requirements on extraction triggering action

Hello,
I have a little bit specific requirements on how to replicate data betweeen two Data Warehouses.
So I have a DW. This DW recieves data from a lot of source systems.
Also it have some table, the structure of that table like the following (lets name the table "load_proc_table"):
source_system, load_start_date, load_finish_date.
What I need is to perfrorm extracting data from the DW basing on previously obtained value of the load_finish_date:
1. Init load. Extract data, save current value of the load_finish_date (let it be saved_load_finish_date).
2. Extract data changes using triggering action: when exists (load_proc_table.load_start_date > saved_load_finish_date AND load_proc_table.load_finish_date IS NOT NULL)
3. Extract only data changed in time period between load_proc_table.load_start_date and load_proc_table.load_finish_date (all rows in the tables are marked with date/time showing when row)
So the question: is it possible to save load_finish_date and use it for triggering extraction process?
And is it possible at all to meet requirements described below using Golden Gate?
Why I need it: I need to run ETL process only after all the actual data will be trasfered to the destination database (between saved_load_finish_date and last load_finish_date values).
Thanks.
Sergey.

I think you mean the followings:
You plan to use ETL loading tool to do the initial loading. However, you want to replicate the new data added to DW during the loading time.
If this is the case, you can start the Oracle GoldenGate extraction when you start the initial load to record the changes. Then start the replicat after the initial loading is done.
If not, please clarify. May I ask what DB is used for your source DW?

Hyperion Planning Server Hardware Specifications/Requirment 11.1.2

Hi Team member,
we are planning to buy Production & Development Server for Oracle Hyperion Planning & Budgeting Instance,
please advise where I can find document/formula to calculate Hardware Specification/requirements to order rite Hardware.
Regards,
Alee
Edited by: Alee on Jun 12, 2012 4:59 AM

Hi team members,
we are using Hyperion PLanning Version (11.1.2)...
if someone can redirect me to formula kind of thing "how to calculate Hardware Requirements WRT increase in number of concurrent sessions".
for example need formula like below.
Minimum Server Requirement: 10 GB lets say for 5 concurrent sessions for 1-2 Applications
for every 5 concurrent user addition, increase Hardware Like processor 1 2.X Ghz , Ram 5GB , HDD 100 GB....
thanks for your replies, I already checked mentioned documents (Deployment Guides).
Regards,
Alee

Tried to load photos to ipod but its ways the required file cannot be found

I tried to load my photos on to my ipod but its ways "the required file cannot be found" so what do i have to do to get the file? i have the ipod video. so can any one hepl me plz!

I had the same error message after I had restored my Pictures/iPhoto folder from a backup. After restoring my iMac's Pictures folder, I kept getting that message. Everything else would sync just fine, even the movies.
I figured that it was the iPod photo cache folder. It's located in the Users>Pictures>iPhoto Library>iPod Photo Cache. I deleted that folder, it sync'd up all the pics.
This simple deletion was my answer. I've searched through these boards so many weeks for the answer. I've done those Five R's to no avail so many times. I even thought my ipod being Windows Fat32 based was an issue. I hope this works for you as well. Caveat: always make backups before you delete anything.

Hi this morning when i switch on my fon i am unable to switch on my fon then when i plug in the charger via cable plug in its mention activation required than when i on its mention plug in itunes

Hi this morning when i switch on my fon i am unable to switch on my fon then when i plug in the charger via cable plug in its mention activation required than when i on its mention plug in itunes

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

What are the specific requirements for scalability?

Hi
what are the specific requirements for scalability?
for a share point internet portal
adil

Hi Adil,
According to your description, my understanding is that you need to know about SharePoint Scalability.
For your issue, please have a look at the blog:
http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
https://www.linkedin.com/today/post/article/20140610232851-17468776-scalability-planning-in-your-sharepoint-2013-office-365-roadmap
http://www.slideshare.net/garthluke/effective-sharepoint-scalability-management-to-blob-or-not-to-blob-thats-the-question
http://download.microsoft.com/download/7/F/0/7F069D0B-B6BD-4692-868B-E8555BB72445/LargeScaleDocRepositoryCapacityPlanningDoc.docx
Best Regards,
Eric
Eric Tao
TechNet Community Support

HT1414 its say app requires ios 4.3. how do i download

its says app requirs ios 4.3. how do i download 2 i pad

Are you sure you really do not have a 2G iPod? Those can only go to 4.2.1
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the

When will iTunes 11 actually be compatible with Windows 8. Not just as print on a specification requirements list. When will iTunes 11 be functionally compatible?

I just got off the phone with a Senior Rep at Apple who clearly and concisely stated.
Apple iTunes 11 Does Not Support Windows 8.
He stated that there is currently nothing in the works to support Windows 8.
I installed and read the specifications requirements list which states that Windows 8 is supported.
I have Windows 8 Professional and have not been able to sync or back up my iPhone since installing Windows 8.
When will Apple actually address this?

This is a user support forum. We don't know what Apple will do when. iTunes 10.7 didn't cliam to support Windows 8. iTunes 11 does. If there are still outstanding issues with compatability for some people then these have to be found and workarounds put in place. I don't have Windows 8, but I gather for some people updating drivers (I don't know which) has fixed their problems.
tt2

Functional specification required for Me57 requirement

In SAP MM, Transaction ME57, I want to pull in the Common Inventory Quantity (Not Project or Sales Order Stock) of the Material which is maintained on the Purchase Requisition.
And also in the T code MB52 screen, the Inventory Quantity i want to bring it. It will be ALL Common Inventory in the Plant (minus Storage Loc a001 for Plant a000). Again, this should NOT pull in Project or Sales Order stock. Only Common Inventory.
I would like a rough functional specification draft ASAP. Pleas help.

Hi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A

ABAP proxy based on XSD with specific requirement for NAMESPACE

Hi
I'm using PI 7.11
My scenario is an ABAP proxy from SAP backend to filereceiver. NO mapping.
The SI is based on an XSD from our customer, which have a targetnamespace, so a namespace requirement of six chars namely "SBSFL1:nnn".
When sending the message from our SAP backend - SAP ALWAYS ignore this targetnamespace SBSFL1 and replaces it with nr1:nnn. Why? When taken the same XSD into xmlspy and generating sample XML et works great all nodes/fields have a prefix of SBSFL1 ....
Why is PI 7.11 ignoring this targetnamespace requirement. I was hoping this was possible to archive WITHOUT any XSLT mapping or other "tricks" in the MAPPING runtime (i want to avoid any mapping because of performance)
Hope for som help, since this is a major issue
Cheers and thx in advance

> Why is PI 7.11 ignoring this targetnamespace requirement.
Because there is no standard having a specific namespace prefix.
It does not make any difference which namespace prefix is used.
Unfortunatly some developers don't about the XML standards and expect a specific namespace prefix, like PIDX.
Blame them
Regards
Stefan

Using CRM ACE for the specific requirement.

Hi,
We are implementing the CRM ACE for the SPecific authorization requirement.
I will explain our Requirement in brief,
1)For Accounts(BP), only Bp's who are maintained in the Relationships tab other than contact person should be able to
edit that account. Others wont even have authorizations to view that account.
2)For Opportunities, only Bp's who are maintianed in the sales team will have access to edit that opportunity, others wont
have access to even view that opportunity.
3)For activities , Only Bp's who are maintained for the Activity Partner's will have acces to edit that activity.
As this cannot be done using the normal authorization concept,we are using the CRM ACE.
we have defined all the rule id's, AFO class, AFU class, OBF Class, and Right id, Work package and user group.
Is there any other better way than CRM ACE ?
If you worked any such kind of scenario in past can you send me those details.
Thanks
Rajani

Hi Myfriend,
Please send me step by step procedure to create role and how to use ACE in authorization and how authorizatoin table need to modify in CRM and how Transaction and table is configure in order to assinged to user. Please send with taking two good CRM transaction example
Thanks
Qureshi

ITS - A Specific Requirement

Similar Messages

Maybe you are looking for