ITS - BBPSTART not displaying

Hi,
I am trying to launch the bbpstart page in browser (via going to SICF), but getting error - Page cannot be displayed. I have checked that the table TWPURLSVR is maintained and the BBPSTART service is activated as well.
What other things do I need to check to start the logon page and other pages.
Regards,
Rahul

Hi
TWPURLSVR table. you must have URL entries w.r.t your logical system double check scc4 client vs srm logical system
what is the exact error message you received, check syntax too in the URL definition.
br
muthu

Similar Messages

ITS service not displaying page in web browser from trnx SICF

Hello gurus
iam having a problem when trying to test ITS fro trnx SICF.The web browser window pops up but it doesnt display anything.The service is active and running.
i checked at os level in dev_icm log file and found the following error:
[Thr 5] Mon Oct 25 10:30:52 2010
[Thr 5] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 22;10.26.24.44:1090) [nibuf.cpp 4611]
[Thr 5] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2340]
that is the link that is suppossed to be opened in the web browser ::http://lmntrst01.ba.bc.test123.com:8000/sap/bc/gui/sap/its?sap-client=666
Has anyone faced a similar problem before.It ERP 6 EHP4 on Solaris SPARC
Any ideas are most welcome

Hello,
Please see note 816973 to clarify some basics first. Especially steps 3 - 6.
Also, the URL you posted has no service name and would lead to an error anyways, you should test with WEBGUI or IT00 or some other service.
Edgar

I recently sent a really really long iMessage and now when I open my messages app I just get a blank screen. My divide isn't frozen its just not displaying any messages and such

I sent my gf a really really really long txt msg of the emoji heart just repeating its self like 1000000 times and now the messages app doesn't work. It's not working on her phone either. Any solutions?

Hi there,
You may want to try force closing all of the open apps and the resetting the device. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W.

ITS does not display the page properly

Hello all,
I have installed ITS 6.1 and working with SRM 3.5 in the backend.
When i call individual services thru the browser they work fine but when i run the 'START' service thru the browser(all other services can be called thru the 'START' service) and click on a hyperlink(some service), i get the error "The page you are looking for might have been removed, had its name changed, or is temporarily unavailable".Please help.
regards,
Deepti.

Hi Deepti,
Please provide the URL that you use to call the START service and also the URL that is executed when clicking on a hyperlink.
Best regards,
Henning.
P.S.: Please grant reward points for helpful answers.

MENU item selection does not display drop down in ITS enabled transaction

Hello,
We are experiencing a strange behavior between two portal env.
1. DEV.
For example we have transaction MM01 display in the Portal via ITS (integrated). The end user can select the Menu Tab and the System Tab and the drop downs appear as expected.
2. Prod
Same scenario as above. Only this time, end user is unable to select the button. The Menu and System Tab dont appear greyed out but selecting it does not display the drop down.
Material, Edit GoTo Defaults are some of the links under the Menu tab for MM01.
Very confusing. And this is the behavior in Prod for all transactions. Any ideas on why this is happening would be greatly appreciated.
The architectural difference is that DEV has no Web Dispatcher versus Prod has the Web Dispatcher.
We are on EP 7.0
Many thanks.
Regards,
Sunil

Thanks. Now, I realise this may cause dismay to some, but I have now solved the problem, and just wanted to share my experience with those even less savvy than myself. In Dreamweaver, the Spry css styles are arranged with little or no hint as to which style controls what. I found that there is a rule in the sub-menu styles that controls the little graphic arrows which indicate that there are dropdown subs under the tabs. I had removed these arrows to make way for my background images. However, the rules that control their positioning by percentage were still there, causing my images to display incorrectly. Of course, there was no way anyone could have spotted this and helped me as the fault was in the external spry css file, not the page code. So many thanks to vw2ureg for looking anyway. Regarding the page code, which you have flagged up, would you mind elaborating on what you see wrong here? I'm none the wiser. Many thanks again.

JSP error page does not displayed on its own, includes in the original JSP

Problem Description: - Exceptions in a Condition cause pages to fail to render.
The actual issue is, the JSP error page does not displayed on its own, included in the original JSP Page when exception occurs.
Problem Cause: As per the JSP specification when jsp content reached the buffer size (default 8KB) the page being flushed (Part of condent displays). The default �autoFlush� value is true.
When the page buffer value is default size (8KB), and if any exception occurs after flushing the part of the content, instead of redirecting into error page, the error page content included in the original page.
If i specify autoFlush="false" and with default buffer size, at the runtime if the buffer size is reached, i am getting stackoverflow error.
To solve the above problem we can make it autoFlush=�false� and buffer=�100KB�. But we can�t predict the actual size of the page.
I found in one of the weblogic forum as no solution for this issue. Ref.
http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_clfydoc&answerpage=solution&page=wls/S-10309.htm
Please provide me any solution to resolve the problem.

Error-Page tags work best with an error.html pages. If you have an error.jsp page what I would do, and I have, is wrap my classes and jsp pages in a try catch block where you forward to the error jsp page and display anything you want. YOu can also do this with if else statements. I have used the tomcat error pages before but when I've implemented them I used java.lang.Exception as the error to catch not Throwable. I don't know if this would make a difference or have anything to do with your problem.

I have restored my new replacement iPhone 5s from my latest iCloud back up. However my camera roll pictures are not displaying. Its not saying i don't have any pictures, it just shows empty white squares? How do I get my pictures back? Thanks!

I have restored my new replacement iPhone from my latest iCloud back up. However my camera roll pictures are not displaying. Its not saying I don't have any pictures in my camera roll, it has all the spaces for them, but it just shows empty white squares? How do I get my pictures back? Thanks!

It's difficult to say whether it's stuck or not as the time to restore a backup can depend on many factors. You'll have to decide when you think it's just not continuing. You could try turning the phone off (hold the power button until you see the red off slider, then slide to turn off), then back on to see if that would get it going again.
When you're convinced it's just hung, you can go back to settings and tap Stop Restoring iPhone to stop the restore. You'll then have to try restoring it again (Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens and when given the option, choose Restore from iCloud Backup). Be sure it's connected to your charger and wifi while it's restoring the backup.
You might also try the approach posted here by ezjules: https://discussions.apple.com/message/19518589#19518589. This seems to have worked for some people who had trouble restoring their photos from an iCloud backup.

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
i am on a Windows 7 professional PC, 64-bit.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

BBC One Highlights page not displaying content of its panes

Why does the BBC One Highlights page not display the content of its panes?

There seems to be something up with their javascript that produces slightly different image url's than on other browsers.
Instead of something like this:
http://ichef.bbci.co.uk/images/ic/336x189/legacy/episode/b03ggg2z.jpg
it's producing say
http://ichef.bbci.co.uk/images/ic/336x0/legacy/episode/b03ggg2z.jpg
which doesn't exist.

Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

Yosemite - MacBook Air 10.10 - "Notes" does not open - "Preview" opens, but does not display PDF's - "iCal" works in new strange ways, as if no one checked its operation - Everything worked very well until Upgrade to Yosemite ! - Happen to others?

Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

HT4623 i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

Have you tried the restart/reset/restore troubleshooting path? That would be the best initial set of steps to take, particularly in a situation like this.

While printing google map from FF4 its not displaying the map in the print out paper?

FF4 displaying the google map in my website. But while printing google map from FF4 its not displaying the map in the print out paper.
I chekced this FF 3.6 and there is no problem with this and other versions. FF4 having this problem.
What should I do for this? Please let me know.

What printer models is this intended for? I assume it is aimed at the lower end inkjets, with the suggestion of loading 10-25 sheets of paper.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

My firefox page is not connecting to network and also its not displaying the troubleshoot problems option?

my firefox page is not connecting to network and also its not displaying the troubleshoot problem option?

At the very least, I recommend you restart your router, (your internet box).
More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it? Did you do anything to change your setup, and if you did, what?

I'm at work and my Mac book pro is saying its connected but will not display a web page. Others who have the MacBook is connected. Tried to restart. Please help

I'm at work and my MacBook Pro is connected wifi but a web page will not display. Other have the pros and is connect. Tried restarting but not working

You're not a liar. They should not charge you $90, it is within the 1-year warranty that comes with it and you are entitled to a free replacement. I have never had the problem myself on a 15 month old MacBook, so there must be SOMETHING that happened to it, maybe without you noticing. But might I recommend a wireless trackpad or Apple "Magic Mouse?"

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

ITS - BBPSTART not displaying

Similar Messages

Maybe you are looking for