Its been 2 days since the release of ios 5. i have tried and tried to update but keep getting error 3194. someone help?
Please help me. Much apprieciated
- Have you tried the actions specified for that error number here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
- Also look at the previous message on the right hand side of this page with the grren checkmark under the heading "More Like This".
Similar Messages
-
I tried to update my ipad 2 to iOS 5, but keep getting Error 3194...any ideas?
I first tried to update my ipad 2, running currently on iOS 4.3.3, to iOS 5 but iTunes keep telling me that an unknown Error 3194 has occurred. I uninstalled iTunes and installed it again. I restarted my laptop, but still the same message.
How can I upgrade my ipad 2 to iOS 5????Click on this link: http://support.apple.com/kb/TS1275
-
My battery life on my iphone 4 has been TERRIBLE since the most recent iOS update!
My battery life on my iphone 4 has been TERRIBLE since the most recent iOS update. Is anyone else experiencing this? At night I use a white noise app, and up to the most recent update, I never was below half battery in the morning. Now my phone is completely dead in the morning. I've noticed it draining faster in general since the update as well, but that particular app was just the best example.
One of the new features on the iPhone 4 is Multitasking ; it lets you do multiple things at once. For example, while iPhone is busy downloading a movie from iTunes, you can switch to the Safari app and browse IMDb in the meantime. So there's no more waiting around.
Each time you open an app and then press the home button, the app is still open. At the end, you may have too many apps opened at the same time.
To close apps, double click on the home button. Your opened apps will appear; hold one of them, then click on the red close to close an app.
Close as many as possible if you don't need them. -
i replaced my phone at apple y'day, due to a broken screen. Brand new phone, but i am unable to connect to wifi, at home or work, so presuming its a fault with the phone? not router, i have also done a software update, is there a solution? thanks
Hi Eric,
What message do you get when you try to connect?
Cheers! -
I got the 1st iPad but it needs iOS on it I don't know how to go about getting it can someone help me
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update.
Cheers, Tom -
I was updating the latest software i.e iOS 6 on 3gs and battery got finished and now I cant turn my phone on and when I update it with itunes error 3194 comes up
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I have an old i phone 3G and do not know the password for it. trying to restore it from itunes so my daughter can use it as an ipod but keep getting error code 1015, any help on how to get passed this please?
Hi ratcat14!
I have an article that can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
I have installed Adobe digital additions and have tried to authorize but keep getting error message "Connection error" . The internet connection is working and I do have an Adobe ID can you help please.
I have been using Adobe reader for PC to download my eBooks but the eBook Vendor has switch to Digital Addition,this is from sjpt,
Try completely removing any authorization using ctrl-shift-D to ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your Adobe ID. -
i keep getting error 3194 when i try to upgrade my iphone4 on ios 5.1.1 to ios6.what should i do?
From the page which you posted your question:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?
You run Windows in Parallels or Fusion. Then in Windows you install the program.
-
trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...
The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
See also
*[[cannot connect after upgrading firefox]]
*[[options window - advanced panel]]
* [[error loading web sites]] -
i am trying to restore my iphone after an ios update but keep getting a message saying it is unable to restore. PLease assist
The phone was jailbroken, wasn't it?
-
Hi I have mac os x 10.6.6 and need to update however keep getting the message " software update server ( 172.22.13.4 ) is not responding". My internet connections are all working. Any ideas how to solve this?
If you have enough room on the boot drive, head to System Preferences > Accounts and create another Admin Account, log out and into it and try your Software Update again.
If this doesn't work, connect a Ethernet cable to the router or modem (power off/on) and try again.
If this doesn't work then run through this list of fixes.
..Step by Step to fix your Mac
Diagnosing network issues -
trying to burn CD but keep getting error message "The attempt to burn a disc failed. The burn failed because of a medium write error. Tried different speeds with no luck
The burn failed because of a medium write error. Tried different speeds with no luck
Then try to use a different brand of DVD or at least a different batch of DVD. The disk may be defective.
Maybe you are looking for
-
Having problem with FCP 5.1.4 adding transitions. Just new to this app.
So I get 2 maybe 3 transitions set correct. After that none work properly. ie: lets go for the quicktime zoom transition. So as it zooms out it plays the first quarter of the 1st part of the transition in the zoom box. This is not correct it should b
-
How do I set a maximum length (in characters) of a CLOB field
Hi, I've seen some questions like this around, but I did not find a clear answer. This is my problem: I want to make my CLOB field to accept a maximum of 32768 characters. This is because I need other data manipulation tools to receive an ORA error w
-
Cannot Autofill sequential content into adjacent cells in Numbers
Numbers V3.2 for OSX Problem #1: I cannot Autofill sequential content into adjacent cells. I enter Jan., Feb. into the first two cells, then try to use the little yellow ball to project Mar., Apr., etc. into the adjacent cells. I'm new to Numbers,
-
UTF-8 support in Web AS Java 6.40
Hi, All, Our web application running on Web AS 6.40 with SQL Server 2000 needs to support multiple languages. We create the tables with column type NVARCHAR, set encoding scheme to UTF-8 for JDBC driver, add '<%@ page language="java" contentType="tex
-
Hi! I'm working on a Line chart in Desktop Publisher, with this data: <LocalGridData colCount="{count(xdoxslt:group(.//ROW, 'saw_2'))}" rowCount="{count(xdoxslt:group(.//ROW, 'saw_0'))}"> <DataValues> <xsl:for-each-group xmlns:xsl="http://www.w3.org/