Its not a question i just think that for ios 5 you shoud make facetime its own app

its not a question and i just think you should make facetime its own app for ios 5

You are not addressing Apple here at all.
We are all iphone users like you.

Similar Messages

Its not a question, but i just hope someone from apple can read this, i just wish you can make a card just like itunes card, for ipad wi-fi card. would be convenience.

its not a question, but i just hope someone from apple can read this, i just wish you can make a card just like itunes card, for ipad wi-fi card. would be convenience.

That's why he gave you the link to make the suggestion.
But returning to your proposal ... Apple does not sell any of the "wifi" connections. It would be up to providers of service to sell giftcards, and perhaps Boingo or some of other airport-commercial WiFi firms do. I can't think of any other place I've been asked to pay for WiFi.
Now Verizon and AT&T, as well as other providers in other countries, could sell Gift Cards... and again, perhaps they do, but you'll have to check with them or make the suggestions there. It's really not an Apple issue, as they don't sell or provide any connections, just the hardware to make them.

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi Lawrence1981,
Thanks for visiting Apple Support Communities.
You may want to check this article for additional troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jeremy

This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database.

Hello All,
I am getting this error while I am connecting my access database website for the change
"This database was connected to a Microsoft Access Services site that is not compatible with this version of Microsof Access. You cannot make design changes or modify data in database."
I am using SharePoint 2010 and Microsoft Office 2010.
I have created one Contact Database Site and now I am trying to modify the layout of the form in Access. and I am getting the error that I have mentioned.
Please provide help on it.
Thanks in Advance....

Hello All,
I got the answer, we have to enable the port 80 or where the access service is deployed and we have to change Trust setting and also, enable the macro from Access.
Hope this will help to other....

I just downloaded Lion and now my computer just shuts down for no reason. What is its problem?

I just downloaded Lion and now my computer just shuts down for no reason. What is its problem?

I recently made the same mistake. The thing to do is download the new Quicken Essentials for MAC. After you install the new version follow the instructions on how to transfer your old files. There is a way, it just takes a little time and, if I remember correctly, it takes the info from your quicken backup files. Hopefully you had auto back up on and your files are intact. I didn't and reconstruction was a bear but entirely possible. The new Quicken is quite different but seems to work quite well. Good luck.

Suddenly, I cannot sync my Boselink with iPhone. Iphone 4s says Bose sound...not connected. I JUST updated software to iOS 6.1.3. Why isn't this working? I can not play pandora on my Bose.

Suddenly, I cannot sync my Boselink with iPhone. Iphone 4s says Bose sound...not connected. I JUST updated software to iOS 6.1.3. Why isn't this working? I can not play pandora on my Bose.

They are absolutely now paired after doing all you said, as I reset both the Bose Link and the Iphone. Now we have a pair, but no sound on the speaker or the iphone when they are connected. I know they are connected b/c the iphone says they are in the blue tooth setting AND the Bose has a solid blue tooth light on.
Now what? This is beyond frustrating and only happened when I UPDATED ios!
Thank you!

HT201304 my i phone says its disabled until i die just jokes but for a long time and i cant figure out what to do its my phone

my i phone says its disabled until i die just jokes but for a long time and i cant figure out what to do its my phone

Follow the instructions in this support document for a disabled iPhone. iOS: Forgot passcode or device disabled

Would anybody think that for all of the pages of apps, for each time that you swipe, the backround would change..... You could disable this in settings

Would anybody think that for all of the pages of apps, for each time that you swipe, the backround would change..... You could disable this in settings.

Tell Apple: http://www.apple.com/feedback/iphone.html

In Yosemite Mail, the control click option no longer works when clicking on attachments, that previously allowed you to save, quicklook, and select app to open with. Any solutions?

In Yosemite Mail, the control click option no longer works when clicking on attachments, that previously allowed you to save, quicklook, and select app to open with etc. Any solutions?

Hi
It shows just 4 always as an option in the "open with" lsit. Also I haven't downloaded any apps for a while so why would it start now?
Do you know how I can estabilsh how many apps are counting toward this 10 and what they are?

Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with an app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on th

Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with your app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on the iphone?
Thankyou.

Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with your app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on the iphone?
Thankyou.

Its not saving my signin information or password for my Hotmail account. It remembers my facebook account but not hotmail.

Its not remembering my sign in infor for Hotmail. My facebook account is remembered and so are other accounts...but not Hotmail. On all of my computers at home and work. Started happening about 1 week or so ago.

I have the same problem, but with a gmail account. Others in my family who have gmail accounts can use facetime on their itouches without trouble. I don't this this is related to the email address being at hotmail. I talked to a "genius" at the Apple Store and he said he was having the same problem (name or password is incorrect). He thinks it's a problem with Apple's servers. Some email addresses get messed up for some reason, and then you can't use them for facetime. What worked for him and for me was just to create a new appleid with a new email address. Of course that is a terrible solution, though, because folks who know your typical email address will try to facetime you there and it won't work.
Would love to hear a comment from Apple on this one. How can one get a message through to them?

I guess my question is just too difficult for everyone

I am trying to modify my configuration to be more robust and cover some scenarios I have not previously thought about. My device is a cisco pix 525 with ios 8 on it.
I have a basic configuration, the cable box comes into the house and the pix outside interface is plugged into that. The inside interface plugs into a ethernet switch, and the rest of the network plugs into the switch.under this current setup, I have 3 remote access groups. the first one is a full tunnel group, the second is a split tunnel, and the third one is web only traffic for secure browsng when I am not home.
DHCP is setup and all inside hosts can talk to the outside hosts passing full traffic both ways and vice versa, the outside hosts on the full and split tunnel can talk to the inside hosts with full traffic.
The IP layout is as follows: 10.1.1.x is for the inside hosts, 10.1.2 is for full tunnel, 10.1.3 is for split tunnel, 10.1.1.4 is for web only.
Here is my goal with questions:
The goal is to setup a second network(a small lab) which will allow guests etc to connect to my network but not hit anything outside of that subnet, while the inside hosts can still talk to all hosts on the 10.1.5. subnet
I can plug a switch into the ethernet2 nic, and have everything on ethernet2 get an ip range of 10.1.5.x?
Can I configure a new vpn group that also allows anyone connected to it to only see hosts in 10.1.5.x?
Can I set it up so that anything on 10.1.1.x, 10.1.2.x and 10.1.3.x can have access to the hosts in 10.1.5.x but not allow it the other way around?
The outside VPN access is working fine. it leases a 10.1.5.x address to remote hosts connecting in. what I can not seem to get at this point is the second network DHCP part working. The interface is on and turned up. When I plug anything into the NIC card it just sits there trying to get an IP and then ultimately fails.
The config script I ran before this has the following:
configure terminal
interface ethernet0
nameif outside
ip address dhcp setroute
no shutdown
exit
dns domain-lookup inside
dns domain-lookup outside
dns name-server 8.8.8.8
dns name-server 8.8.4.4
dhcpd address 10.1.1.50-10.1.1.254 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
dhcpd enable inside
nat-control
global (outside) 101 interface
nat (inside) 101 10.0.0.0 255.0.0.0
access-list ThcInside-nat0 extended permit ip 10.1.1.0 255.255.255.0 10.1.2.0 255.255.255.0
access-list ThcInside-nat0 extended permit ip 10.1.1.0 255.255.255.0 10.1.3.0 255.255.255.0
nat (inside) 0 access-list ThcInside-nat0
same-security-traffic permit intra-interface
object-group icmp-type ICMPObject
icmp-object echo-reply
icmp-object source-quench
icmp-object time-exceeded
icmp-object unreachable
access-list outside_access_in extended permit icmp any any object-group ICMPObject
access-group outside_access_in in interface outside
http server enable
http 10.0.0.0 255.0.0.0 inside
logging asdm informational
no asdm history enable
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption aes-256
isakmp policy 1 hash sha
isakmp policy 1 group 2
isakmp policy 1 lifetime 43200
isakmp enable outside
crypto isakmp nat-traversal 30
policy-map global_policy
class inspection_default
inspect icmp
inspect icmp error
exit
exit
username blahblah password blahblah
crypto ipsec transform THCTransformSet esp-aes-256 esp-sha-hmac
My additions to try to get my objective working are as follows:
interface ethernet2
nameif lab
ip address 10.1.5.1 255.255.255.0
no shutdown
exit
dns domain-lookup lab
nat (lab) 0 access-list ThcInside-nat0
nat (lab) 101 10.0.0.0 255.0.0.0
dhcpd address 10.1.5.2-10.1.5.254 lab
dhcpd dns 8.8.8.8 10.1.1.1 interface lab
dhcpd enable lab
http 10.0.0.0 255.0.0.0 lab
access-list ThcInside-nat0 extended permit ip 10.1.1.0 255.255.255.0 10.1.5.0 255.255.255.0
nat (outside) 101 10.1.5.0 255.255.255.0
ip local pool ThcIPLabOnlyTunnelPool 10.1.5.1-10.1.5.254 mask 255.255.255.0
group-policy THCLabOnlyTunnel internal
group-policy THCLabOnlyTunnel attributes
dns-server value 8.8.8.8 8.8.4.4
wins-server value 10.1.1.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelall
tunnel-group THCLabOnlyTunnel type ipsec-ra
tunnel-group THCLabOnlyTunnel general-attributes
address-pool ThcIPLAbOnlyTunnelPool
default-group-policy THCLabOnlyTunnel
tunnel-group THCLabOnlyTunnel ipsec-attributes
pre-shared-key blahblah
crypto dynamic-map THCDynamicMap 1 set transform-set THCTransformSet
crypto dynamic-map THCDynamicMap 1 set reverse-route
crypto map THCCryptoMap 1 ipsec-isakmp dynamic THCDynamicMap
crypto map THCCryptoMap interface lab
Thanks,
Jeff

I think you're saying you're having trouble with getting DHCP to work on the lab interface.
Have you tried shrinking your ThcIPLabOnlyTunnelPool and the DHCP address space so they don't overlap? I'm not an expert on PIX DHCP but I doubt the local pool and DHCP database are synching data so that they know not to assign addresses already in use.
Did you run wireshark on a client connected to the lab interface? Debug DHCP on the PIX?

PSE 7 Editor not responding. Stuck in thinking mode for eternity...

Hoping for some help with this issue. Pleeeezee
I start in Organizer, choose an image to edit, click on the quick fix (shoot in Raw), do some simple changes, then if I need more fixes I click on Open Image. The Editor window pops open and then the thinking mode for eternity is what happens next. Sometimes the image does finally appear but it could take several minutes. Has become increasing worse lately where images do not appear at all.
Has 3GB memory, maxed out the memory usage in the performance. Just uninstalled PSE then re-installed it and still have the same issue.
Not sure what else I can try. If anyone has ideas or has dealt with this same issue before, please share.
Thanks!!
-Martin

Please provide more specific info about your computer - processor (single or dual), OS (XP, Vista or 7), 32-bit, video card, etc.
You realize RAW file will require a lot of power to process. Using a memory-stick (ReadyBoost) may help.
Personally, I gave up trying to process RAW in PSE - switched to Lightroom 2. Only use PSE for editing work beyond scope of LR2 - like Panaramas, merged exposure, etc.
Dean

HT1390 it is asking me some security questions which i really dont remember answering when i first installed itunes, how can i rent a movie when its asking me questions i have no answers for?

i dont understand how i can be asked questions i have no answers for, could someone please let me know how i can rent a movie without the questions? thanks,

Hey scoops13
You will need to be able to answer the question to go through with the rental. Once they have been answered you should not be asked again. The article below will explain about the security questions and what to do if you cannot remember the answers to the questions.
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
Thanks for using Apple Support Communities.
Regards,
-Norm G.

TS4006 why cant i find my phone phone it worked before now its not working and if i dont act fast i will lose it completely its been almost a month who is responsible for this app not working?

does apple garantee this app becauser when i opened my sprint account there was no insurance available so now what happens if there app doesnt work its been a month since ive seen my phone?

daveharris040 wrote:
does apple garantee this app
No

Its not a question i just think that for ios 5 you shoud make facetime its own app

Similar Messages

Maybe you are looking for