Its not allowing to post more than 10 questions

hi frds
while im posting a questions in forum im getting message like you cant post more than 10 questions.
why its showing please give me the solutions.
regards
soraj
Moderator: you need also to close your messages which have been answered.

Hello ,
Please consider using a check table for the characteristic involved if you are working with large
number of values assigned
With a check table you have a possibility to work with a huge amount of values , also the performance should improve
Please refer to the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/ec/62ae27416a11d1896d0000e8322d00/frameset.htm
Section - Entering a Check Table
Hopefully the information helps
Thanks
Enda.

Similar Messages

Is it true that iPhone 4s does not allow to take more than 1000 photos?

Hi!
Is it true that iPhone 4s does not allow to take more than 1000 photos?
http://dolboeb.livejournal.com/2299939.html

Not true.
Only Photostream is allowed to take a max of 1000 photos, then they will be removed from server/icloud.

During PO creation system should not allow to create more than contract val

Hi,
System is allowing to create the PO more than the contract value so I want to stop it please explain the required config settings.
always system should allow to create the PO with in the contract value only.
thanks.

Hi,
GOto IMG>MM>Purchasing>Environ Data>define attrib of system messages
change Msg.No:042 in Appl Area:06 & Version:00.. to Error Message...
This will solve your problem
Edited by: Antony anburaj on May 5, 2010 9:41 AM

I need to send a lot of invitations by e-mail today. How can I do this without problems? Last time I ried, I got the message that I was not allowed to send more than a special amount..

I want to know how I can assembly the adresses so that I can send everything the same day. Otherwise, I can't remember to whom I have (or have not!) sent my e-mails.
I need to do that some times a year, when I send invitations för me little art-gallery!
I would be grateful if you could answer as soon as possible, becaue the happening-day is tomorrow abnd I am very late for sending the invitaions..

There are currently 3 threads re: battery performance and a solution to improve it.
do a quick search in the forum and it will yield you those results.

OVM manager not allowing to open more than 1 console

Hi guys,
Finally I got a fix from Oracle support in order to be able to convert from VMware (*-flat.vmdk) to OVM format.
Now I have a small problem that I recently noticed, and I am not too sure how to solve it:
When I have many VMs running, I can login to the console of the first machine that was started! When I try to open the console of the others, I get an error message "Network error:could not connect to server: IP:PORT"
with IP and port replaced by their proper numbers.
Any idea how to solve this thing? Is it related to port reservation? I am sure it should be something very simple but I am not able to find it for some reasons...
I appreciate any help,
Thanks.

My server had say 10 VM's from port 5900 to 5910
I open a console on from 1 system and now want to open the another for the same vm from another workstation.In this case wht port whould i use.In the manager by defualt a port is assigned to a vm for vnc consoleOn my mnaager firewall is switched off

Subcode cost posted more than budgeted amount.

Hello PS Experts,
I have one query regarding we budgeted one subcode 4000 usd on 11/03 after user suplmented 8000usd on 23/03 but when he was supplemented wbs suplement status is inactive, after that user posted more than budgeted amount 30000 usd.
When we are checking report it is showing minues 18000 value because in budgeted status assigned value is 30000 distrivuted value is 12000.but when i am checking subcode availabity activation or not,it is showing activated.
If budget availability control is activated system can not be allow to post more than budget?
But if am checking cj20n status 23/03 budget supplement is inactive.
How the user inactive the supplement budget,?
May be the reason system allowed to posting more than budget.Anybody can share your valuable inputs.
Regards,
Nivas.

Hi Srinivas,
Please do the following:
1. Check your settings for Tolerance Limits for AVAC.
2. Check if any cost elements are maintained for exemption list from availability.
3. Check the Availability analysis report using CJ30. And see if any cost is getting posted using Cost Elements which are in Exemption list.
4. Check how the postings were made to the WBS where you have more actual cost then budget? Is the tolerance limit setting maintained for all targets or some selected ones..
Hope it helps you..
Cheers
Sammar

Posting More than 900 lines not allowing uploading using BDC for FB60

Hi,
When i am upload vendor invoices with More than 900 lineitems using BDC program it is giving the fallowing error .
1 You are entering line item 900 , a maximum of 999 line items are defined
As per i know it will allow 999 line items for one document posting . But i am getting error when i am posting more than 900.
If any body know the solution please share with me .
Thanks
SriHari

I vaguely remember that SAP reserves lines for automatically created items e.g. for taxes, you might have run into that limit. Check in that direction with a functional expert, the limit might be configurable.
Thomas
Edit: now I did what you could have done and checked the where-used-list for message F5 138, the 900 is hard coded, and it is just a warning, seemingly to alert the user of the brick wall he is about to hit very soon.

Just upgraded to 9.4, safari will not let me keep more than 3 windows open, if i try to open 4th, one goes away

Safari will not let me keep more than 3 windows open, when I try to open 4th, one goes away, just installed 9.4 last week, nothing but problems

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Smartform not giving output if more than 2 pages

Hi1
I have a smartform which basically has three parts the first page , the next page and the TC page which is the terms and conditionspage. This is a smartform for printing QUotes. If the quote has a very few line items in it then its running out fine printing the first page and followed by the terms an conditions page , but if there are say 100 items in it and I try outputting the form , it tells output cannot be issued, I treid with various options and I see that whevere the items are more than it can fit into two pages it gioves me a message that output cannot be issued. I have a very similar form for another region , that seems to be working fine , even when there are more than 2 or more pages but for this one of my form it dosent go beyound the second page of line items , it just gives me the message output cannot be issued.
Could anyone please indicate where teh problem could be that si cauisng this .
Thanks

Hi!
I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
Thanks

How to post more than one photo on blog page

Can you post more than the top placeholder photo on a blog page? I'd like to post photos as they relate to the blog I'm writing but can only use the placeholder photo at the top of the entry page--is it possible to place more photos on the page or do you have to use a web layout and not a blog layout?
Thanks.

It is possible because I Do it on my blog. All you have to do is click he media button and get the photo you want, I then drag it to the desktop, and then drag it into my blog. For some reason iweb can get a little wonkey and makes it look like it can't be done, but it can. Good luck!
http://web.mac.com/skewedreality04

How to find and replace data in form fields in acrobat xi, its not allowing to do so while trying, a

how to find and replace data in form fields in acrobat xi, its not allowing to do so while trying, asking for adobe livecycle to get installed. please help.

Easiest way to do it is the following:
- Open the PDF file in Acrobat.
- Go to Tools - Forms - More Form Options - Export Data.
- Save the form data as an XML file somewhere on your system.
- Open XML the file in a plain-text editor (I recommend Notepad++).
- Let's say you want to replace all the years in the dates from "2013" to "2014". Do a global Search&Replace of "2013-" to "2014-" (I added the dash just to make sure that only date fields are edited).
- Save the XML file (maybe under a new name).
- Go back to the PDF file, and now go to Tools - Forms - More Form Options - Import Data.
- Select the edited XML file and import it.
- Done!

Not able to update more than 10,000 records in CT04 for a characteristic

Hi all,
We are not able to update more than 10,000 records in CT04 for a certain characteristic.
Is there any possible way to do this?
Please advise...its a production issue.
Thanks.

Hello ,
Please consider using a check table for the characteristic involved if you are working with large
number of values assigned
With a check table you have a possibility to work with a huge amount of values , also the performance should improve
Please refer to the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/ec/62ae27416a11d1896d0000e8322d00/frameset.htm
Section - Entering a Check Table
Hopefully the information helps
Thanks
Enda.

Why can't I post more than about 45pic. on Facebook

Hi,
When I am in Aperture and I want to post pictures on Facebook I can not post more than about 45 at the time in one album. Is that a limit impose by Facebook, or is it the size of my files? Most of my pictures are in Raw, Do i need to convert them to Jepg first? If someone could give me some insight?
Thank you
Normand

You may be running out of space; don't forget the iPad need approximately 2 GB of working space.

My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for mo

My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?

You said "reset," so Meg assumed that's what you did. But "reset" is not a button; to reset the phone you must hold the HOME and SLEEP buttons at the same time until an Apple logo appears. You may have to hold for up to 30 seconds, and if the battery was completely drained, you will have to restore iOS using iTunes on your computer.

PRoblem when posting more than one document

Hi all,
I'm using BAPI    BAPI_GOODSMOVEMENT_CREATE to post the documents for PO_GR.when i post one document through text file it is done succesfuully. when i'm posting more than one document it is giving error "posting not possible".
My code is as follows:
loop at i_data.
concatenate '0'   i_data-stor_loc into i_data-stor_loc.
concatenate '00' i_data-plant     into i_data-plant.
    i_item-po_number = i_data-po_no.
    i_item-po_item    = i_data-po_item.
    i_item-move_type = i_data-mvt_type.
    i_head-doc_date   = doc_date.
    i_head-pstng_date = post_date.
    i_head-ref_doc_no = i_data-del_note.
    i_item-entry_qnt = i_data-entry_qty.
    i_item-stge_loc   = i_data-stor_loc.
    i_item-plant      = i_data-plant.
    i_item-stck_type = i_data-stk_type.
    i_item-batch      = i_data-batch.
I_ITEM-move_val_type      = i_data-move_batch.
    APPEND: i_item,i_head.
    CLEAR:i_item.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
   EXPORTING
     goodsmvt_header             = i_head
     goodsmvt_code               = i_code
   TESTRUN                     = ' '
IMPORTING
GOODSMVT_HEADRET            =
    MATERIALDOCUMENT            = matdoc
   MATDOCUMENTYEAR             =
   tables
     goodsmvt_item               = i_item
   GOODSMVT_SERIALNUMBER       =
     return                      = return
IF return IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
LOOP AT return.
    WRITE: return-message.
ENDLOOP.
WRITE: matdoc.
PLease specify where i'm going wrong.
Regards,
SImha.

Hi,
I had used the same FM to post multiple documents, but never faced this error.
*- Header
MOVE: sy-datum TO bapigm_head-pstng_date,
        sy-datum TO bapigm_head-doc_date,
        sy-uname TO bapigm_head-pr_uname,
        v_mblnr TO bapigm_head-ref_doc_no,
        con_bfwms_bestand TO bapigm_head-ext_wms.
*- Item
*- Populate item data
LOOP AT i_items_trans.
    CLEAR ibapigm_item.
*- Convert the matnr backto 18 char form (External)
    CALL FUNCTION 'CONVERSION_EXIT_MATN2_INPUT'
      EXPORTING
        input            = i_items_trans-matnr
      IMPORTING
        output           = i_items_trans-matnr
      EXCEPTIONS
        number_not_found = 1
        length_error     = 2
        OTHERS           = 3.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ibapigm_item-material   = i_items_trans-matnr.
    ibapigm_item-plant      = i_items_trans-werks.
    ibapigm_item-stge_loc   = i_items_trans-lgort.
    ibapigm_item-move_type = '101'.   "Goods Receipt
    ibapigm_item-mvt_ind    = 'B'.     "Goods Movement for PO
    ibapigm_item-po_number = i_items_trans-ebeln.
    ibapigm_item-po_item    = i_items_trans-ebelp.
    ibapigm_item-entry_qnt = i_items_trans-ktmng.
    ibapigm_item-entry_uom = i_items_trans-meins.
    APPEND ibapigm_item.
ENDLOOP.
*-Call FM
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header = bapigm_head
      goodsmvt_code    = bapigm_code
    IMPORTING
      goodsmvt_headret = bapigm_headret
    TABLES
      goodsmvt_item    = ibapigm_item
      return           = ibapigm_ret.
*- Commit on Success
IF NOT bapigm_headret-mat_doc IS INITIAL.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Regards,
Raj

Its not allowing to post more than 10 questions

Similar Messages

Maybe you are looking for