Its possible import a After effect projects into Motion 5?

hi guys
its possible import a After effect projects into Motion 5?

No you can't do that. Unless AfterEffects can export some sort of XML, even then I doubt everything would be translated. One way is to export layers
you know won't change as movies and import them into Motion. Then just recreate the layers that you need to change.
a

Similar Messages

  • After Effects project into Premiere Pro

    I am having trouble importing my After Effects  project into Premiere. It isn't playing once I bring it in to my premiere.

    What versions of After Effects and Premiere Pro? What operating system? What kinds of source footage?
    What exactly are you doing? What menu commands are you choosing, and what things are you clicking, and in what order?
    Here is a page that describes ways to move things from After Effects and Premiere Pro and vice versa:
    "Working with Premiere Pro and After Effects
    There are many ways to move things between these applications, but importing an After Effects project into Premiere Pro is not one of them, so I'm confused by your issue as you've stated it.

  • Is there a way to Import After effect files into motion

    I was wondering if there is a way to import after effects files into motion.

    hi
    no there is not. The only thing you can do is to export the layers out of AE as movies and import them into Motion. Of course you are then hard baking everything and you lose control, but that would be the same if you went to any other system.
    adam

  • "The importer reported a generic error" when trying to import an After Effects file into Premiere.

    Currently quite new to using both pieces of software - I'm trying to grab a file, either a save or an export, from After effects into Premiere. I've googled around, but I can't find anyone with a similar problem with it being an AE file.
    Just looking for some advice on what to do.

    Okay so I've searched around most of this forum and as much of Google as I could find - I have found similar problems, but nothing exactly the same; and none of the solutions I've found have worked for me. I've seen a lot of people having trouble connecting to the DL server on the file-selection window, but I don't even get that far - an error message just pops up in the middle of my screen - and my error doesn't mention a server, just that it can't connect to AE DL.
    I changed firewall software (which I've wanted to do for months, anyway) and still to no avail.
    As for the "The importer reported a generic error" problem also, I can't find any problems or solutions with After Effects files not being able to be imported.

  • Problems importing After Effects files into FCP

    Hey guys--
    So I have this odd problem importing my after effects clips into FCP. I am working in standard DV, and my After Effects composition settings match my FCP settings.
    I am snipping little bits from my FCP project, exporting them to QT, adding stuff on top in AE, then shooting the clip back to FCP. The problem is, whent he clip goes back to FCP it is slightly "pinched." It's not really thaat visible, unless I try to edit a cut in the same shot. The after effects clip is a couple pixels wider, and the quality is a little blurry. If it is a hard edit, you wouldn't even notice the difference, but the two shots together make it pretty noticeable. I'm not set to square pixels or anything, and i get the same results no matter which codec i render in AE with.
    Any ideas?

    New Discussions ResponsesThe new system for discussions asks that you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts. When you mark a post with the tag, it will also mark the thread as Answered. If you receive the solution or answer to your question outside of the thread, then, and only then, at the top of the thread, mark the thread as Answered. This will mark the thread as Answered without marking an individual post as .
    If we use the forums properly they will work well...

  • Encore DVD 2.0 on Windows: Composition background color of dynamically linked After Effects projects

    Hello,
    I used Adobe Dynamic Link to import an After Effects project, and I saw that in Encore the background color of a composition is set to black even though it is defined with another value in After Effects.
    I had to open the project in AE and place a solid layer with the desired color behind all other layers.
    What are the causes for this behaviour? Did I do something wrong or is it a bug?
    Best regards,
    Christian Kirchhoff

    The composition background is transparent. It has per se no color and does not react to blendmodes and such. It's imaginable that Encore resets it to black for whatever reason (wouldn't know, as I design my menus always with full frame backgrounds to begin with). Still, I would consider it a bug regardless, so please fiel away:
    http:www.adobe.com/go/wish
    Mylenium

  • HELP: My Videohive After Effects project is rendering artifacts!  AE CS6

    Hi all,
    HP-HPE 510t
    i7 2600 @ 3.4GHz
    16GB Ram
    Windows 8 x64bit
    Nvidia GTX 660 Ti
    I purchased a Videohive After Effects project with motion gfx and video, and it  is rendering artifacts in two places.
    I'm exporting Quicktime + animation, tried + PNG, and + photo jpeg but all with the same results.
    I even contacted the author but he cannot explain why either. The interesting thing is, it renders beautifully without any artifacts in AE.
    Only on the export render do I see the black silhouette artifacts. Below are some photos of what I mean.
    Please help? i'm trying to export the highest quality for youtube and am going to H.264 the lossless version.
    It looks correct in AE:
    [URL=http://s10.photobucket.com/user/mystickid/media/ItisworkingcorrectlyinAE.png.html][IMG]http://i10.photobucket.com/albums/a135/mystickid/ItisworkingcorrectlyinAE.png[/IMG][/URL]
    But with black artifacts in lossless render?
    [URL=http://s10.photobucket.com/user/mystickid/media/promoartifact2.png.html][IMG]http://i10.photobucket.com/albums/a135/mystickid/promoartifact2.png[/IMG][/URL]
    [URL=http://s10.photobucket.com/user/mystickid/media/promoartifact3.png.html][IMG]http://i10.photobucket.com/albums/a135/mystickid/promoartifact3.png[/IMG][/URL]
    http://s10.photobucket.com/user/mystickid/media/promoartifact1.png.html

    Thank Rick,
    Only reason that I'm using photobucket instead of the built-in image embeddor (camera icon), is because it doesn't seem to be working for me. All I get is an empty dialog box, tried also with video but that one seems to be working properly.
    maybe ill try firefox.
    any solutions for the artifacts??
    My output module settings so far have been..
    tried:
    1) Quicktime + Animation (lossless) quality 100
    2) Quicktime + photo jpg
    3) Quicktime + PNG (lossless) quality 100
    4) Quicktime + H.264  30mbps
    tried rendering again with "Render Multiple Frames Simultaneously" turned off...still getting artifacts only on these text offset animation frames.
    still looks perfect while in after effects.. I restarted my computer, I cannot figure this out.
    Help! 

  • Arbitrary data param not importing from Premiere Pro project into After Effects.

    Hi,
    I have an AE SDK plugin effect that works in Premiere Pro and After Effects... the effect has a bunch of standard parameters and one Arbitrary Data parameter.
    I believe that the Arbitrary data parameter is implemented correctly, and I have implemented all of the cases for PF_Cmd_ARBITRARY_CALLBACK...
    PF_Arbitrary_NEW_FUNC
    PF_Arbitrary_DISPOSE_FUNC
    PF_Arbitrary_COPY_FUNC
    PF_Arbitrary_FLAT_SIZE_FUNC
    PF_Arbitrary_FLAT_SIZE_FUNC
    PF_Arbitrary_FLATTEN_FUNC
    PF_Arbitrary_UNFLATTEN_FUNC
    PF_Arbitrary_INTERP_FUNC
    PF_Arbitrary_COMPARE_FUNC
    PF_Arbitrary_PRINT_SIZE_FUNC
    PF_Arbitrary_PRINT_FUNC
    PF_Arbitrary_SCAN_FUNC
    The only issue I have found, is that when importing a Premiere Pro project into After Effects with the "Import -> Adobe Premiere Pro Project" option, the value in the Arbitrary Data
    parameter is always the default. There is no problem saving or re-opening projects within AE or PP... and there are no problems with cutting and pasting instances of the effect.
    Importing a Premiere Pro project into After Effects using the Dynamic Link works correctly... the Arbitrary data is imported.
    Thanks.

    Some kind of answer would be awesome... there are Adobe staff members on here right?

  • Cannot Import After Effects Composition into Premiere CS5.5.

    So here's my issue:
    I made an After Effects Project and I'm using Dynamic Link to bring it over into Premiere.  My project, and all of its compositions are fine. But, I recently created a new composition and created my animation on it or whatever. Now, when I go to import it to Premiere, its not there. I've saved, I've tried precomposing, and it lets me import other compositions from that very same After Effects Project. I've saved it, I've closed and reopened both premiere and after effects, I've restarted my computer. And please, oh please. Don't tell me I need to reinstall all of my programs. I get that answer all too often.
    Extra Details:
    I noticed that my composition (inside After Effects) is open and editable at the bottom of the screen. But, in the "bin area" or whatever it's called, my composition isn't listed there after I created it and did all this work and I believe Dynamic Link is using that list to import the project over to Premiere. So how would I get it to show up on that list?

    Not sure what you are saying. If there is no comp in the project window (or "bin area" in your words), it doesn't exist - short of perhaps having hidden in one of the folders there. Clarify what exactly you are doing. Also screenshots of your respecive windows and import dialogs might help (attach them using the camera icon).  And finally, do provide some system info, what footage types you use, comp settings, sequence settings in Premiere and so on. The weirdest things can influence this stuff from some bad comp naming to hard technical issues anything is possible.
    Mylenium

  • I can't import After effects composition into sequence timeline

    Hello everyone
    I am using CS5.5 Master Collection and I have Premiere sequence which I have imported into After Effects via Dynamic Link; I have added some effects etc... Now I am trying to pull the sequence back into Premiere which I have done via Dynamic Link (import after effects composition), which imports the composition fine, however it wont allow me to add the composition to the timeline.  It will however play the composition in the source window.
    Has anyone else come accross this and how do I fix it?
    I have tried looking on youtube and I can see it working for others and no one specifically shows or does anything different to what I am doing.. Please help me.
    Kind regards,
    Milan

    I see what you are saying.  I tested that scenario, and you are correct, it doesn't let you:
    - create a premiere pro sequence
    - open after effects
    - import that premiere pro sequence
    - make changes to that sequence in after effects
    - open premiere
    - import that after effects sequence
    which is essense, would be a link back around back to a premiere pro sequence, so it's been dynamically linked twice.
    It would be interesting if it did allow it, you could do some weird looping stuff, or probably blow up the software .
    Remember, whatever you send over to AE in this method is "replaced with after effects composition", you aren't going to be able to "edit" it back in Premiere.  You replaced that edit with an AE composition.  You have to work with that in mind.
    The main thing about dynamic link is it elimates exporting & importing to get to another program, by just using the project file itself instead as a clip.
    Hope that clarifies things a bit for you,
    - wb

  • Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

    Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

    You haven't given us much to go on here.  What exactly are you doing and what exactly happens when you try?  Which specific version of each program are you using?  (Go to Help>About...)
    On a side note, a simple, brief thread title is all that's needed.  Something like "After Effects Issue" would be fine.  You don't need the full question there.

  • CS6: How do I embed a font into an After Effects project so I don't have to install fonts on all my render machines?

    Just as the title says: I don't want to have to manage fonts on my render machines. I just want to embed the necessary fonts in the AE project file. However, I'm not able to figure out how to do this.
    Ideas?

    You can not embed fonts in AE. An After Effects project only contains links to assets and a script that tells the render engine what to do with the layers. If your animations are set up correctly you may be able to either create the type in Illustrator and create outlines or rasterize type in Photoshop, or create shapes from your type in AE using the Layer>Create Shapes From Text option so that you don't need the fonts.

  • Problems with importing to After Effects

    Hi,
    I can't get my Motion projects imported into After Effects. I have read the manual and done exactly as instructed. When i try to import my Motion project file into AE, I get an error message in AE saying: "files of type "mofo" are not supported. I have no idea where the "mofo" comes from, since the projects are .motn format.
    I was wondering if anybody else has same kind of problems, with Motion and AE?
    The Motion version I am using is 3.0.2 and After Effects is the CS3 version.

    Yes this is a known problem and has been discussed a few times on this forum. It only started being the case with CS3 unfortunately. The only work around is to rename the Motion Project with a .mov on the end of the name, and import to After Effects. This works but means that the very handy feature of 'edit original' stops working, and i've also noticed a number of instabilities (crashes etc) introduced as a result.
    We have to hope they'll (apple and adobe) fix this in a future update.

  • Importing from After Effects - Curves and Remove Grain

    I did some color grading in After Effects, I applied two Color Corrections: 1) "Curves" and 2) "Remove Grain".
    However when I exported to into a Premiere Pro Project and then imported it as a project into CS5.5, it said "The preset used by one or more sequences in the project  requires third party components that could not be located...."
    Then it said
    "Video Filter missing:  AE.ADBE CurvesCustom
    Video Filter missing:  AE.VISINF Grain Removal"
    Where can I get these?
    PS: I have the original boxed FULL VERSION of CS5.5 Master Collection.

    shooternz, I guess it's quite clear what  ectobuilder50 is talking about.
    He created a composition within AE, applied some filters on footage and then exported this composition as Pr Pro project.
    Then he tried to open that project in Pr Pro and got this:
    ectobuilder50, I'd recommend you to use Adobe Dynamic Link instead.
    Create a composition within AE and apply any filters and/or presets you like, then just save AE project.
    Create a brand new or open existing Pr Pro project, then use File -> Adobe Dynamic Link -> Import After Effect Composition... if you are on Windows or smth like this if you are on Mac:

  • Getting After Effects project properties and metadata programatically

    Hi,
    I'm building a render-farm and I'd like to extract some of the adobe after effects project fields from an .aep or .aepx file. To me it makes more sense to send the start and end frames to be rendered to each individual machine rather than depend on the shared folder feature. If this is possible, the project metadata in projects saved as xml doesn't seem to contain this information in plain text.
    If there is a command line tool that can scan an AE project and print out information such as fps, duration, compositions, that would be perfect.
    Thank you,
    Conrado

    Mylenium -
      I found the information I needed - this is a huge one for me, since I organize all of my projects using Bridge - I just discovered that in Bridge, if you go into the XMP Metadata by right-clicking the .mov file, the window which opens has a Tab view - the second from the end is Advanced. If you then roll open the Schema entry, under creatorAtom:aeProjectLink (struct), lo and behold, there sits the project name with the full path!
    This is huge, in terms of being able to pinpoint the project which created the final output on my system.
         Joe Bourke
         Bourke Media

Maybe you are looking for

  • BMW iPod adapter: Problems after 1.2 update

    I have the BMW iPod adapter, my pre Sept 5G 30GB iPod, will skip, if the radio is turned off while listening to the iPod. Then when you turn the radio back on or start the car, it skips It will play for a second the silence, then play then silence. T

  • Import photos deleted from LR3

    How can I import photos previously deleted from LR3?  They are not in recycle bin.  When I try to import they are dimmed because LR thinks they are already imported.  Unchecking the "don't import duplicates" button doesn't work.  (operating system is

  • Process Chain Step by Step

    Hi to all, Please can any one tell me, how to designe Process Chain Step by Step. Or any Document Related to that. i shall be thankful to you for this. Regards Pavneet Rana

  • I see a icuuc40.dll related launch error after updating to iTunes 10.2.1

    Everytime i open itunes my vista says itunes has stoped working and ends it i tried uninstall and reinstall still not working help me

  • Error in address node

    Hi This is the coding i am giving in the window of the smartform.. For progrma lines this is the code i gave: SELECT SINGLE * FROM lfa1 INTO l_lfa1 WHERE lifnr = zxekko-lifnr. IF sy-subrc = 0. MOVE l_lfa1-adrnr TO adRNR. ENDIF. In input parameters:zx