ITS Text translation problem

Hi,
I am facing problem in ITS text translation in ECC6.0. When i loging in eglish language the text appears in the ITS but it doesnot work for other languages.
Kindly suggest how do we do the text translation for ITS. GOTO->translation is disabled in my case. how do we enable this option if GOTO->translation is the answer.
thanks.
Edited by: neha gupta on Nov 4, 2009 11:09 AM

Since I don't use Verb-Ace, some other users will have to help you further. Or you can email the developer for help:
http://www.verbace.com/Contact

Similar Messages

General Text translation problem

Hi SDN,
I have created general text through SE61 in English laguage, now i am trying to translate it into German language in SE63.
Please let me know how to translate it through SE63.
Regards,
Rahul Wagh

Hi All,
I found out the solution & i am marking this thread as answered.
Solution is:
In SE63 goto translation-> ABAP Objects> Long text > from tree select L5 F1 Help> TX General Texts
Here Source & Target languages need to be specified & it will work fine.
Regards,
Rahul Wagh

SE63 translation problems

Hi all
I am trying to translate a custom report with SE63 .. I choose in this transaction:
->Translation
--> ABAP Objects
---> Short Texts
ABAP Texts
Interface Texts
I set source and destination language and voilà ... I can see the texts/titles and so on in original language and a space left to insert translation. I wrote all translations and then I hit save and I saw a S green message in lower screen telling "50 test of 50 to process" ... I thought was strange because I inserted the translations .. so I tried the transaction logging in translated language, but I cannot see any of the translation I inserted ... I also tried to make translation via SE38 (goto -> translations .. that I see causes start of SE63) but got same problem. ... It seems I am missing something in SE63 ... can anybody please explain where is the problem?
Thank you
Gabriele

Hi ,
If its a Zreport the translation can be added through go-->translation and give the translation text . As soon as you hit save the red colour corresponding to the texts turn yellow and a message says "still n of n texts to be processed". Never mind tthe message . now you have to back and activate the text element and selection texts. ideally this is enough for text translation . I
Regards,
Ragesh

Translation Problem in app Map

Hi, there is a translation problem in the new app Map. The Hong Kong City Hall is a place to perform art like dancing and drama, and its name in traditional Chinese is 香港大會堂.However, the map use a name of "中國香港特別行政區市政府" which means "China Hong Kong SAR government office" which is completly wrong polictically and logically. This is a very serious problem that Apple should fix ASAP in order to prevent users complaining on the simple mistake Apple just made.
Looking forward from your reply
Seravee

Apple does not monitor these forum for suggestions. I would follow the instructions here:
How to add a location or report a problem in iOS 6 Maps | iMore.com
You can also go here:
Apple - iPod touch – Feedback

Translation Problem – Region Disappearing

Translation Problem – Region Disappearing
I recently started working on translating my application to German. When I apply my xlif file I have a problem with the contents of all my report regions using Vertical Report Look 2 disappear.
The report region is still visible, however the report contents (corresponding to the report template) have completely disappeared.
When I switch back to English (setting FSP_LANGUAGE_PREFERANCE) the report contents are once again visible.
I am using theme 7.
Thanks in advance.
-Immanuel

Hi Joel,
Dont worry about that last request, i have already fixed the problem.
If anyone else has this problem they can fix it by creating a custom report template with the following code:
Report template Before Rows:
<table summary="Vertical" class="t7vertical3" align="center" border="0" cellspacing="0" cellpadding="0">
Include the following in your Theme.css (or theme_V2.csss in the case of theme 7):
table.t7vertical3 {border:0px #bbbbbb solid;border-collapse:collapse;background:#ffffff;font-size:8pt;}
table.t7vertical3 tr {border-top:1px;}
table.t7vertical3 td.L{font-weight:bold;vertical-align:top;padding:2px;white-space:nowrap;width:30%;text-align:right;border:0px #bbbbbb solid;background:#999999;color:#ffffff;border:1px #bbbbbb solid;}
table.t7vertical3 td{padding:2px;border:1px #bbbbbb solid;text-align:left;}
Cheers,
Immanuel

N95 TEXT MESSAGE PROBLEM

So my problem is I have a unlocked nokia n95 its on AT&T. I can receive text messages but I cant send them. Its the only problem im having with it but its a really annoying one

Go to messaging, options, settings, text message, and check the following settings....
(1) Msg centre in use = Correct number should appear.Ask the network operator if you are not sure(2)Character encoding = full support (3) Receive report = (Your choice-yes/no) (4) Msg validity = Max time (5) Msg sent as = Text (6) Preferred conn = GSM/UMTS (7) Reply via same ctr = No.
After doing the above check whether you can send text now.
Rohinton Contractor

UITableViewCell draws its text white a white background

Has anyone had the problem where UITableViewCell draws its text with a white background, like this:
!http://homepage.mac.com/markkrenek/cellbackground.png!
This is a standard UITableViewCell in which I have specified has a background view, like this:
cell.backgroundView = [[[UIView alloc] initWithFrame:cell.bounds] autorelease];
cell.backgroundView.backgroundColor = [UIColor colorWithWhite:0.9 alpha:1.0];
That's what's drawing gray. But the text label drawn by UITableViewCell draws with a white background obscuring a portion of the background view.
I've tried numerous things like setting the cell and its content view to use clearColor as their background. The issue, I believe, is that the UILabel that UITableViewCell uses needs to have its background color set to clearColor. But there's no way to access that through the UITableViewCell API.

As I mentioned, when I used a built in template, like contemporary, it worked too. The problem only happened with the IBA that I was given. Perhaps the previous owner of the file had accidentally chosen Format/Advanced/Define Default Glossary Style when they had some white on white displayed and caused all the formatting for the glossary to be the same. I was able to fix it using that menu path.
I'm not sure what fixing it in the "source file" means. I was trying to fix it in the IBA file. Not sure where else I would have fixed it.

TextBox losing its text when focus changed?

Hi all,
Im developing a plugin in Illustrator CS3 using VisualStudio 2005.
I design my dialog using ADM in VS.
The textbox losing its text when focus is changed.
In my dialog i have a textbox,checkbox and a ok and cancel button.
In case, if i enter the text and press tab or the checkbox (before moving the focus to ok or cancel button) the text remains uncleared.
But if i enter the text and move the mouse to ok or cancel button the text box value gets cleared.
Please someone guide me to solve this problem.
Thanks in advance,
Poovili

Yeah its working when removing the setdrawproc..
But we need this setdrawproc..Because we save the project settings and next time we load the project the values'll automatically come up using this dialogdrawproc in setdrawproc..the following is our dialogdrawproc code
static void ASAPI DialogDrawProc( ADMDialogRef dialog,ADMDrawerRef drawer)
    ADMItemRef ItemRef;
    if(dialog==g->qcCheckDialog )
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtOverprint);
        sADMItem->SetText(ItemRef,g->BlackValues);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtTintValues);
        sADMItem->SetText(ItemRef,g->TintValues );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtRuleThickness);
        sADMItem->SetText(ItemRef,g->RuleThickNess );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtDashGap1);
        sADMItem->SetText(ItemRef,g->DashGapValues );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtPatterns);
        sADMItem->SetText(ItemRef,g->PatternValues );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtLeadTextSize);
        sADMItem->SetText(ItemRef,g->LeadTextSize );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtSuperscript);
        sADMItem->SetText(ItemRef,g->SupValue );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtSubscript);
        sADMItem->SetText(ItemRef,g->SubValue );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtBitmapResFrom);
        sADMItem->SetText(ItemRef,g->BitmapResFrom);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtGrayScaleResFrom);
        sADMItem->SetText(ItemRef,g->GrayscaleResFrom);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtCMYKResFrom);
        sADMItem->SetText(ItemRef,g->CMYKResFrom);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtBitmapResTo);
        sADMItem->SetText(ItemRef,g->BitmapResTo);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtGrayScaleResTo);
        sADMItem->SetText(ItemRef,g->GrayscaleResTo);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtCMYKResTo);
        sADMItem->SetText(ItemRef,g->CMYKResTo);
        //-------------TYPE AREA---------------------------------
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtAreaWD);
        sADMItem->SetText(ItemRef,g->TAreaWD);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtTAHeight2);
        sADMItem->SetText(ItemRef,g->TAAreaHt);
                        //column size
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn1Height);
        sADMItem->SetText(ItemRef,g->Column1Height);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn1Width);
        sADMItem->SetText(ItemRef,g->Column1Width);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn2Height);
        sADMItem->SetText(ItemRef,g->Column2Height);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn2Width);
        sADMItem->SetText(ItemRef,g->Column2Width);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn3Height);
        sADMItem->SetText(ItemRef,g->Column3Height);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn3Width);
        sADMItem->SetText(ItemRef,g->Column3Width);
        //sADMDialog->Draw(drawer);
        //admDialog->Draw(drawer);
        //-------------SAVE SETTINGS--------------------------------
    if(dialog==g->LoginSaveSettingsDialog)
        ItemRef=sADMDialog->GetItem(g->LoginSaveSettingsDialog ,txtLSSUser1);
        sADMItem->SetText(ItemRef,g->TxtLSSUser1);
        ItemRef=sADMDialog->GetItem(g->LoginSaveSettingsDialog ,txtLSSPassword);
        sADMItem->SetText(ItemRef,g->TxtLSSPassword);
    //-----------------ADD NEW USER-----------------------------------
    if(dialog==g->AddNewUserDialog)
        ItemRef=sADMDialog->GetItem(g->AddNewUserDialog ,txtLogin1);
        sADMItem->SetText(ItemRef,g->TxtLogin1);
        ItemRef=sADMDialog->GetItem(g->AddNewUserDialog ,txtPassword);
        sADMItem->SetText(ItemRef,g->TxtPassword);
    if(dialog==g->AddingUsertoDBDialog)
        ItemRef=sADMDialog->GetItem(g->AddingUsertoDBDialog ,txtNeuUser);
        sADMItem->SetText(ItemRef,g->TxtNeuUser);
        ItemRef=sADMDialog->GetItem(g->AddingUsertoDBDialog ,txtCreateNewPassword);
        sADMItem->SetText(ItemRef,g->TxtCreatePassword);
    //-------------------------Change Password-----------------------
    if(dialog==g->ChangePasswordDialog)
        ItemRef=sADMDialog->GetItem(g->ChangePasswordDialog ,txtCPLogin);
        sADMItem->SetText(ItemRef,g->TxtCPLogin1);
        ItemRef=sADMDialog->GetItem(g->ChangePasswordDialog ,txtCPOldPass);
        sADMItem->SetText(ItemRef,g->TxtCPOldPass);
        ItemRef=sADMDialog->GetItem(g->ChangePasswordDialog ,txtCPNewPass);
        sADMItem->SetText(ItemRef,g->TxtCPNewPass);
        ItemRef=sADMDialog->GetItem(g->ChangePasswordDialog ,txtCPConfirmPass);
        sADMItem->SetText(ItemRef,g->TxtCPConfirmPass);
    if(dialog==g->SelectProjDialog)
         if (CyanToMagBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        /*else if(RasterColorsBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if(RasterColorsBool==true)
            dialog = sADMItem->GetDialog(ItemRef);
            if (ItemRef==sADMDialog->GetItem(dialog, txtAssessmentPath1))
                sADMItem->GetText(ItemRef,g->ConversionFolderPath ,1024);
                sADMItem->SetText(ItemRef,g->ConversionFolderPath );
                //MessageBox(NULL,g->BlackValues,"Txt",0);
       else if(SaveAdvancedAssessBool == true)
           ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->AssessmentFolderPath);
        else if(ConvertSwatchBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath);
        else if(DrawBBBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtBBSpacing);
            sADMItem->SetText(ItemRef,g->BBSpacing );
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtBBStrokeWidth);
            sADMItem->SetText(ItemRef,g->BBStrokeWidth );
        else if(ConvertGradientBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if (PantoneToCyanBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if (QceraBatchConversionBool1==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if (PantoneToMagentaBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if(SaturationBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if(ColorOverprintBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        //else if(ColorsBatchBool==true)
        if(sADMItem->GetBooleanValue( sADMDialog->GetItem( g->SelectProjDialog, CHK_CheckColors1 ))==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if (ConvertFontsBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
            else if(FontCorrectionBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if(ScalingBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if(SaveAssessBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->AssessmentFolderPath);
            //MessageBox(NULL,g->AssessmentFolderPath,"Assess",0);
//MessageBox(NULL,g->ConversionFolderPath,"Assess",0);
    if(dialog==g->CleanDialog)
        if(CleanArtBatchConversionBool==true)
        ItemRef=sADMDialog->GetItem(g->CleanDialog ,txtLeadingValue);
        sADMItem->SetText(ItemRef,g->leadingValue );
        ItemRef=sADMDialog->GetItem(g->CleanDialog ,txtBlackValues);
        sADMItem->SetText(ItemRef,g->ApplyBlackValues );
        ItemRef=sADMDialog->GetItem(g->CleanDialog ,txtCleanArt_SpecifyFolder1);
        sADMItem->SetText(ItemRef,g->CleanArtFolderPath );
Let me know if i'm not clear. Thanks in advance..

Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies. ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

Text box problem or question

I'm having the text field problem. I have two text boxes (inside my .fla file) one i can add more text without the box expanding and can then select the text and croll down to view the missing text and the other one just gets longer the more text I add. I'm trying to duplicate the text box that does not expand the more text I add to it.
All the settings in the properties are the same on both and I've tried it in MX and CS3 and the both have the same properties in both.
I'm stumped can anyone help.
I'm attaching the file.
Thanks!

If you right click the textfield on the stage you can select the "scrollable" option for it. Another option to duplicate the textfield is to copy/paste it.

Question on the known solution to the "Three pixel text jog" problem

Hello,
I'm "browser-checking" my website using Dreamweaver CS4 tool for that. I've got in various places the "three pixel text jog" IE problem. I followed the link to solution proposed by DW. It says I should add an IE conditional statement in the <head> part, so that I can define the CSS zoom property for that particular element. Hence, something like that:

(assuming the problem occurs for a <p> inside my #Content div.)
My question is: can I replace this by

For another browser problem (prevent the browsers from using some of their own default settings), it was advised to reset the margin, padding and border properties using:
   border: 0;
   margin: 0;
   padding: 0;
(although in my case I had to later remove border: 0; because it would prevent default buttons of forms to be displayed as buttons.)
Does this * really mean "anything"? Is it valid as used above for fixing the three pixel text jog problem? If not, do I really have to define this zoom property for any single HTML element for which it occurs? (It currently occurs for some headers, <div>, "<div> <div>" sequence, some <p>.)
Any comment welcome...
Emilie
P.S.: I tried it and DW doesn't flag that problem any more, but I'm unsure how much I can trust it.

The behavior is unexpected. The file paths are
correct?

Ok here goes nothing i have a late 2009 iMac 27 11.1 intel bought it refurbished and they installed mountain lion 10.8.4 on delivery w/o disks i think ran lion orig. idk & its been all problems 10.8.5 M.L so tried Maverick 10.9 now worse please help me

ok here goes nothing i have a late 2009 iMac 27 11.1 intel bought it refurbished and they installed mountain lion 10.8.4 on delivery w/o disks i think ran lion orig. idk & its been all problems 10.8.5 M.L so tried Maverick 10.9 now worse please help me.....i still have backups of software for mountain lion 10.8 however i need to throw everything on a usb toshiba 1TB external storage for backup, plus from what ive read being i needed to try to go back and update the efi and frimware for my original model but when i found the right one it wont accept it.....and now i just tried to reinstall my mountain lion probably shoud have left in the cloud til i got backed up ...which i now needed to move my previous backed up stuff off the drive to reformat it properly as i read it being toshiba needs to be guid hard drive mac im relatively new to the whole mac thing and im just as ****** off as i was with PC ....lol i just wanna record music and have a steady workflow i do have a new 4s iphone and cloud storage but i believe my computers hacked or got malware or just ****** from incompatiable software ......and keychains not working for admin either PLEASE tell ,me what to do thx .....i will be so grateful im good with recording software and stuff bad with computers programing lol HELP me

Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac11,1
Processor Name:          Intel Core i7
Processor Speed:          2.8 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          8 MB
Memory:          16 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          IM111.0034.B02
SMC Version (system):          1.54f36
Message was edited by: lnwko

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

We bought an iphone 4s for our daughter. We transfered it to straight talk. She can make calls and text no problem. She can use the WiFi but is unable to use the internet or mms. How do we update the APN?

To clarify for anyone who is still having any problems doing this.
1. Unlock your phone with the carrier ( I know the process will work if it is jail broken but I am assuming you dont want to void the warranty on your phone) NOTE: even if you purchased the phone outright at Wal-Mart it is still locked to ATT so you will have to unlock the phone. If it's already unlocked skip to step 2. This works and will work even if you update the phone.
1a Here is the link to unlock a ATT iphone. Simply follow the instructions https://www.att.com/deviceunlock/client/en_US/
2. Get a T- mobile SIM. Even if you don't want the service, if you feign interest, they will send you one for free or 99cents. If you need it now you can get one at a T-mobile store too.
3. Once you have both your Straight talk SIM and your T-mobile SIM follow these instructions:http://www.youtube.com/watch?v=mFFf5uqk18M
4. If you have any remaining questions look at all the responses posted previously on this thread or check out the Howard Forums Wiki: http://wiki.howardforums.com/index.php/Straight_Talk_iPhone
Everything should work flawlessly at this point. If not let me know and I'm happy to help when I can. I hope this makes doing this very easy for everyone in the future. God Bless -J

I bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working

i bought my iphone 4 through ebay and its unlocked. the problem is that my phone does not sync straight away. I sync my music file through autofill. I want to sync ringtones but its not working.
I saw cidya aap so i m not sure if it was jailbroken or not before but it is back to normal settings.
My problem started when I tried to sync my music files. I pressed 'sync' all it says is waiting for sync start, preparing to sync and then waiting for the changes to be applied. but it does not sync at all.
I found a way to sync my music files through autofill but I really wanted to sync ringtones but its not syncing and I really wanted to put ringtones in my phone please help.

If you see the cidya app, your iPhone is hacked with the cutsie term for this being jailbroken. This also means all the built in security has been removed making the iPhone as insecure as an android device.
Restore the iPhone with iTunes as a new iPhone or not from the backup to get rid of that hacking garbage. If the iPhone has hacked to be unlocked, the iPhone will no longer be unlocked when doing so.

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

ITS Text translation problem

Similar Messages

Maybe you are looking for