ITS Trace level

Hi,
We have a dual-host ITS instance 6.20. The Wgate is placed in the DMZ and can't be managed by ITS Administrator (ITS Administrator is behind the firewall)
How can I change ITS Trace Level for the Wgate in DMZ?
Is there some kind of config file?
Thx in advance.

Hi Brian,
you can change the tracelevel in .../SAP/ITS/6.20/config/ItsRegistryWGATE.xml in section Traces. Make sure to restart wgate.
Best regards,
Klaus

Similar Messages

Trace level="1" type="T" -no interface action for sender or receiver found

Hi Experts,
I try to integrate PI and abap 7.0 using XI adapter (feel doubts about type).
RWB and SXMB_MONI at PI side show that test message was successfully sent. But I cant see it in DQ
http://cnh.com/XI/SDIIOC01/RCVR</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type
What could be the problem which I'm facing and how could I fix this
regards
nagendra

i understood its ur SAP XI to inbound proxy scenario?
Do the message in MONI of XI is showing correctly?
R u getting an error message in R3 moni?
Did u configure ur scenario correctly both at Xi n R3 using sproxy tcode.
chirag

Trace level of RWB's Message Monitoring - Detail Message - Tab "Audit log"

Hi,
My flow is: File -> PI -> Transformed File with seeburger module. Everything is good except the trace level in RWB.
Exactly, in our PI production, under RWB -> Message Monitoring, when I select a message (e.g PI -> Outside) and see its Detail, under tab "Audit Log", I have a log with only 2 pages (which corresponds to the sender part "File -> PI")... whereas in our PI pre-production, I have 4 pages for the exact same flow, on which I have also info of the receiver part "PI -> Outside"...
My question is just: do you know which parameter is involved in this trace level of RWB's Message Monitoring Detail log ?
regards.
Mickael
Note: in [Help SAP|http://help.sap.com/saphelp_nw04/helpdata/en/fd/16e140a786702ae10000000a155106/frameset.htm], I see only this sentence "Audit Log: The audit log for the selected message is displayed as the default setting.".
Edited by: Mickael Huchet on Oct 18, 2011 1:59 PM

Hi Shabarish,
Thanks that will help to localize my search.
else by hazard, you don't know which parameter in this tree is for the "Audit Log"?
coz I did a quick look in prod and pre-prod, but it seems the severity is the same (e.g "Info" for most of them) whereas the trace level of "Audit log" is different.
Thanks for
Regards.

How to launch Web administration service and set trace level for web dispac

Experts,
Can some one help on how to setup trace level for Web dispatcher? and how to launch web administration interface.
Thanks in advance.

Hi Sam,
You can launch the Web Dispatcher Interface through the follwing link:
http://host:port/sap/wdisp/admin
The Username & Password are created when the profile is run for the first time. The userid is ICMADM
This link points to the web disaptcher administration interface & its usage.
You can set the trace level once you login to the interface.
http://help.sap.com/saphelp_nw70/helpdata/en/4f/3bee29d9764e988bdeecdb4d484722/frameset.htm
Hope it is helpful.
Regards,
Abhishek

Error in Trace Level: could not create BPE proxy for message, no XML objec

Hi
We are doing a scenario of File to RFC using BPM and I am getting this errror in Tcode SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And getting this error in Trace level
could not create BPE proxy for message, no XML object definition found for message EB32BB50610A11DC9648001321CB837D
Why this error occurs?
What could be in error?
Thanks in advance
Regards
Sami Qureshi

Hi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************

How can I check and change the system set events trace level?

Dear all:
How can I check the system set events trace level? I don't want the alert_log so big.
Regards
Terry

Hi Terry;
Please check :
How to determine which system events are currently being set? [ID 845043.1]
How To List All The Named Events Set For A Database [ID 436036.1]
How to set EVENTS in the SPFILE [ID 160178.1]
Also check:
http://www.dba-oracle.com/t_grid_rac_events_in_Oracle.htm
http://www.akadia.com/services/ora_events.html
Hope it helps
Regard
Helios

How do I increase the trace level of the dev_server file?

I have a dual stack SCM system and the java stack will no longer start. I'm seeing some messages in the dev_server0 and dev_server1 files, in the work directory. But at the top of those files, it says the current trace level is at 1. I would like to have some further details as to the error. How do I increase the trace level of these files? Thank you.
~TJ

You can increase the trace level by changing the instance profile
set "jstart/TRACE = 3", (this affects the server0 process)
set "rdisp/TRACE = 2" (this affects the ICM).
Then Restart the ICM and the server process (e.g. from the SAP MMC -
there is no need to restart the entire instance),
hope this helps.
Regards
SuneeL

Unable to start the database(Process m000 died, see its trace file)

Hi,
Oracle Version:10.2.0.1
Operating System:Linux
Hi suddenly the database went down and in alert logfile it is showing error like this.
Fri Feb 18 01:40:51 2011
Process m000 died, see its trace file
Fri Feb 18 01:40:51 2011
ksvcreate: Process(m000) creation failed
Fri Feb 18 01:41:18 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_ora_15998.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Fri Feb 18 01:41:19 2011
Process m000 died, see its trace file
Fri Feb 18 01:41:19 2011
ksvcreate: Process(m000) creation failed
Fri Feb 18 01:42:19 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_ora_16032.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Fri Feb 18 01:42:20 2011
Process m000 died, see its trace file
Fri Feb 18 01:42:20 2011
ksvcreate: Process(m000) creation failed
Fri Feb 18 01:43:20 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_ora_16036.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Fri Feb 18 01:43:21 2011
Process m000 died, see its trace file
Fri Feb 18 01:43:21 2011
ksvcreate: Process(m000) creation failed
Fri Feb 18 01:44:21 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_ora_16042.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Fri Feb 18 01:44:22 2011
Process m000 died, see its trace file
Fri Feb 18 01:44:22 2011
ksvcreate: Process(m000) creation failedand generating lot of trace files.
Please help me how to solve this .
Thanks & Regards,
Poorna Prasad.

In my alert log file I also find this error.
ed Feb 16 06:11:13 2011
Process J000 died, see its trace file
Wed Feb 16 06:11:13 2011
kkjcre1p: unable to spawn jobq slave process
Wed Feb 16 06:11:13 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_cjq0_26196.trc:
Wed Feb 16 06:11:13 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_j000_4172.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Wed Feb 16 06:11:14 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_j000_4172.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
Process J000 died, see its trace file
Wed Feb 16 06:11:14 2011
kkjcre1p: unable to spawn jobq slave process
Wed Feb 16 06:11:14 2011
Errors in file /u01/app/oracle/admin/apdtest/bdump/apdtest_cjq0_26196.trc:Thanks & Regards,
Poorna Prasad.S

Sbtio.log and trace levels

Hi all,
we're using Tivoli (TSM) with RMAN and I want to log error messages to USER_DUMP_DEST/sbtio.log . The log is there but always empty, even when there is a trace file stating there should be messages in it.
RMAN documentation says that sbtio.log must be configured with TSM. This does not seem to be true: I found that you can set a trace via ALLOCATE CHANNEL .... TRACE <integer>. I did NOT find anything in the RMAN documentation on this topic.
Can anyone enlighten me? What trace levels are there, what do I do to just get the errors dumped to the log? Any hints appreciated.
Thanks, Susanne

The 'details' can' tbe set to be more specific.
MAX_DUMP_FILE_SIZE specifies the maximum size of trace files (excluding the
alert file). Change this limit if you are concerned that trace files may use too much
space.
A numerical value for MAX_DUMP_FILE_SIZE specifies the maximum size in
operating system blocks.
A number followed by a K or M suffix specifies the file size in kilobytes or
megabytes.
The special value string UNLIMITED means that there is no upper limit on trace
file size. Thus, dump files can be as large as the operating system permits.
See Also:
Oracle9i Database Performance Tuning Guide and Reference for
more information on setting this parameter
Your operating system-specific Oracle documentation for the
default value and range of values
Parameter type String
Syntax MAX_DUMP_FILE_SIZE = {integer [K | M] |
UNLIMITED}
Default value UNLIMITED
Parameter class Dynamic: ALTER SESSION, ALTER SYSTEM
Range of values 0 to unlimited, or UNLIMITED
See Also: Oracle9i Database Administrators Guide and Oracle9i
Database Performance Tuning Guide and Reference for more
information on setting this parameter

Process m000 died, see its trace file

Oracle keeps crashing. When i look at the log, i'm seeing Process m000 died, see its trace file. In the trace file, i see the following error message.
Process m000 is dead (pid=20243, state=3):
Unable to schedule a MMON slave at: Auto Flush Main 1
Attempt to create slave process failed.
Can happen for several reasons:
- No process state objects
- Reached OS set limits
- A shutdown was going on
Check alert log for more details.
Does anyone know what is causing this? We are currently running Oracle 10.2.0.4 on solaris 10.

Metalink note : 458981.1
Unable to Schedule a MMON Slave Message in Trace File After Enable/Disable Restricted Session
Bug 3599698 - ENABLE RESTRICTED SESSION/IMPORT/DISABLE RESTRICTED SESSION GENERATES TRACE
-Anantha

Need to get employees belonging to this org unit + its lower level org Unit

Hi ,
    We have a requirment where in which we need to get all the employees belongs to a perticular in an
    organization UNIT and its lower level org units.IS tehr any FM to find the same.
   i.e if we input org unit then it should return all the employees belonging to this org unit + its lower level
    org unit(B002 relation ship)
   Any inputs are appreciated..
Regards,
Zareena.

Hi Zareena,
This is wht i understood in org management...
evaluation path is the relation between two entities,
entities may be
job(C)
position(S)
Employee(P)
Org Unit(O)
O - O is line mangaer,
S - O belongs to,
P - S is owner of.
i think if u observe O - O is line manger.. means in with same position
S - O means that position belongs to the Org Unit
P - S means the employee has that Position.
All these type of relations will me maintained in the Infotype 1001 with the raltionships.
All object types will be maintained in the Infotype 1000.
Regards,
Sreenivasulu Nallani.
Award points if helpful..

Trace level changed

Dear Experts,
I have an RFC function which contains a submit report to execute in background. Normally our system has trace level = '0' in SM50, but everytime when this job runs, the trace level changes to '2', which saved too many logs in our system.
can anybody tell me how to prevent this situation? Can I force trace level = '0'?
Thanks!
Joanne Wu

Hi Joanne,
We just came across this trace level change. Did you find a reason and/or solution as to why this happened. We are researching as I write this and just came across Note 987134 which may offer insite. However, this note talks of Kernel 4.6D, 6.0 and 7.0. We are running on 4.6D_EXT for another month and this note says nothing about this kernel. Hope you have an anwser. Thanks.
Paul G

Setting logging trace level

Hello,
Is it possible to set the logging trace level(FATAL, ERROR, ...DEBUG) for the following jolt components :
JRLY, JRAD, JSL, JSH ? If yes how ? If no how can we debbug this component ? or make the logs more talkative ?
Thanks in advance for your answers
pledreau

There aren't any configurable debug levels available to customers in Jolt.
Your best bet for debugging this component is to turn on the TMTRACE
facility. Depending on which ATMI APIs your application is using, this will
produce few or no additional userlog messages from the Jolt processes
themselves, but it will produce a significant amount of additional userlog
information from the application servers that are called by Jolt, which may
be of help in debugging.
Ed
<First Last> wrote in message news:[email protected]..
Hello,
Is it possible to set the logging trace level(FATAL, ERROR, ...DEBUG) for
the following jolt components :
JRLY, JRAD, JSL, JSH ? If yes how ? If no how can we debbug this component
? or make the logs more talkative ?
Thanks in advance for your answers
pledreau

When I open BEx, error message appears: "....trace level 8 activated.."

Hi,
when i open bex, then it appears:
"SAPGUI 640
Enviroment information:
Directory: 'C:\Documents and Setting\ ...\SapWorkDir
trace level 8 activated
logging activated
For maximum data security delete the settings as soon as possible."
But I dont know, which setting it is meaning.
Thanks zd.

Jan,
The "*." should NOT be in the registry.
We are still experiencing the problem and have a customer message into SAP. The problem only occurs logging on through SAP Portal. It occurs on Sun J2SE version 1.5 and 1.4.2 consistently. It occurs using the Microsoft VM occaisionaly. Deleting cookies, temporary internet files and clearing the history in IE seems to solve the problem for users using the Microsoft JVM.
We are on XP SP2 with all the latest MS security patches. Since we use Portals as the main logon process, we have the registry key set to prevent saplogon from launching when the user logs on.
Hope that helps,
John

Process m001 died, see its trace file

Hi
Kindly tell why process died & look at the trace file
Process m001 died, see its trace file
Thu Dec 28 14:30:53 2006
ksvcreate: Process(m001) creation failed
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 3
CPU : 4 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:443M/2047M, Ph+PgF:3071M/4967M, VA:1572M/2047M
Instance name: xxxx
Redo thread mounted by this instance: 1
Oracle process number: 11
Windows thread id: 4712, image: ORACLE.EXE (MMON)
*** SERVICE NAME:(SYS$BACKGROUND) 2006-12-26 18:31:12.750
*** SESSION ID:(29.1) 2006-12-26 18:31:12.750
*** 2006-12-26 18:31:12.750
Process m001 is dead (pid=5516, state=3):
*** 2006-12-27 15:30:13.421
Process m001 is dead (pid=6128, state=3):
*** 2006-12-27 16:31:07.359
Process m001 is dead (pid=5572, state=3):
*** 2006-12-28 14:30:53.312
Process m001 is dead (pid=5792, state=3):

According to
KSVCREATE: PROCESS(M000) CREATION FAILED' MESSAGES IN ALERT LOG
Doc ID: Note:352388.1 Type: PROBLEM
Last Revision Date: 14-SEP-2006 Status: PUBLISHED
you should increase the PROCESSES parameter of your database instance.

ITS Trace level

Similar Messages

Maybe you are looking for