ITS Transaction closing showing the button "Start SAP Easy Access"
Hello
I have to start an SAP service with a defined transaction the URL.
Now the user want go back to start an other transaction from the SAP menu.
But when he go out of the first transaction he see the button "Start SAP Easy Access".
But what we want is to show directly the SAP Menu.
I have tried:
~WEBGUI_EASY_ACCESS_MENU = 1 no impact
activate a redirect URL in the service with ending .....TRANSACTION=SMEN, that works but then we dont can close the SAP in the actual mode.
the only way is to close the browser window. And we actually have special logout site that we dont can show with this solution.
Thank you for answers!
Monti
Hello Matthias
Thanks for your input.
I have found an other solution.
I have defined a second service only for showing the Menue.
This is now the logout page from the original service. So i have a first Service as a singletransaction service and after the first funktion they move to the second service with a "normal" menue and the user can navigate to a next ITS-function in the second service.
Best regards
Markus
Similar Messages
-
Drill down Reports created In SPRO to execute in SAP Easy Access
Hi
In customizing which is transaction spro, at the following location Financial Accounting->General Ledger Accounting->Information System->Drilldown Reports you can create drill down reports.
What I would like to know is where can the user execute them from in SAP Easy Access?? There is transaction FSIB (Background Processing) which allows you to execute it in SAP Easy Acces but it wants to print the report and not display it on the screen. Is there a way to display on the screen in SAP Easy Access??
Thanks in advanceHi,
To run a report either in foreground or background you need to know the report name. To run the report in foreground goto SE38 and give the report name and execute it. If you see the status message " This report is not a type P" then goto SE93 and findout the transaction with the help of report name description. so you can run the transaction. To add the transaction to your role technical consultant will take care.
Bye,
Jyothi. -
My iphone 5 is crashing after updating to iOS 7 . It shows the apple start up screen . Need some further update from apple . It often happens when I am on a call or browsing the net on chrome . My chrome app is also updated .
See Here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
Is it possible to add pushbuttons to the SAP Easy Access Front Screen ?
Dear gurus.
Is it possible to add pushbuttons to the SAP Easy Access Front Screen when a person logs in?
if so how can we achieve it ?
Regards
Saad Nisar.SAP Standard Menu
SAP Standard Menu helps you in including your own menu within the Sap menu bar .It helps us in making own function related to the program, sub routines or any transaction. The main advantage of this standard menu is that u can even modify this menu according to your client or project needs.
The main advantage of the SAP Menu bar is that it can find specific transaction without knowing the transaction code. SAP Menu is determined by the task you are doing in the SAP R/3 system.
Menu are like Drop down list ,as when you click on any particular menu item, further options will be displayed.
You can have as many as standard menu bar in the SAP Standard menu.
The SAP Menu Bar contains the menus for the functional and administrative areas of the system.
Features of the Sap Menu Bar are as Follows
Menu Description
System It contains all the function that affect the system as a whole such as Create session, User profile and Log off
Help This menu provide various types of online help that are available in R/3 system
Following are the Steps how to modify the SAP Standard Menu Bar
Transaction code SE41 is used for displaying the Menu Painter Menu.
Now in the Program field ,Type the MENUSYST as the Program Name.
Now in the Status field choose the option MEN by using the F4 help .
After choosing the MEN option for the Status field, click on the Change then the Following Screen will be displayed
Click OK and move Forward , it is just Alerting that Menusyst is a user interface .
After that the Following screen will appear with Modify Status Men in Program MENUSYST
Double click on the Menu bar shown in the Left side of the Screen .Such as the Menu bar will open .
Double click on the System such that list of menu will be displayed .
Now you can See there are two columns present in the system menu ,One is Code column and other is Text column. Right Click on your desired location of these two column such that it will show the option.
From the option menu choose the option Insert Entry . By choosing this option a new row is inserted in the System menu . when the New row is inserted then type Menu in the code field and My Option in the Text Field as follows. Both the code field and the Text Field name depends on your requirments.
Now Double click on the Menu of the Code field such that Function attributes window will open.
In the fuction type choose the function type as T (Call a transaction).and then Click Ok.
After Selecting the Function type . Click on the Ok button of the fucntion Attruibute Screen .
After that activate the Function by selecting the Menu in the code field and click on the Fucntion Code button Present on the top of the Sap Screen .
Now Save (Ctrl +S ) interface of the program MENUSYST .
Now Activate (Ctrl + F3) interface MENUSYST as follows .
Now Come to the Initial screen of the Menu Painter i.e . SE 41 ,so as to test the modified SAP Statndard Menu ( by Pressing F3 ) and Type the Program As MENUSYST and status as MEN and then Click Test Button .
After clicking the Test Button the Status Simulation Screen will appear , just click Excute button on that popup screen.
Now the Menu Painter Intial Screen will appear such that you can test your function code there. Now Click on the System menu in the Menu Bar
After clicking to the System Menu , the list of the option will open and our Customized /Modified SAP Menu will appear into it as follows .
Now you can See that the My Option Menu appears on the Standard System Menu. There are various Advantages of the modification of the Standard Menu which are discussed as follows .
Code Flexibility, As We can choose our own predefined Standard Menu fucntion in the Program as required by the client.
Independency . Sap program is independent of various other supporting program that are supporting to the defined function.
Ease of Code . More Uniformity is established between the Standard Menu function.We can include our own predefined fucntion module within this standard function module
Deactivating of the SAP Standard Menu
You can just move to the MENUSYST Prgram through SE41 Transaction Code . then Select the MENU option which you had customized and then click the Function Code again in the SAP screen.
Then Message will be Displayed that Function MENU is Deactivated as follows .
Now Save and Activate the interface MENUSYST. Test the Program using the Initial Screen SE41
And check the System menu in the Menu bar ,then the My Option Menu is deactivated . -
Transaction code for user menu, sap easy access
Hi system experts!
Does anybody know which transaction causes the user-specific menu within "SAP easy access" (the welcome screen after login, like /n does) ?
I need it to be called from a portal iView, so that the usual sapgui-like screen with the user's menu appears in a portal screen, both for SAPGUI for windows and http.
Trx. S000 or SESSION_MANAGER does not cause the user-specific menu when called from the portal. These work least of all for call via ITS.
thanks
Andreashi ,
The transaction code is SE41.. This is for creating Menus and tool bars.
you can also try SMEN it will call the user menu as you described in your post.
Regards,
Krishna
Message was edited by: Krishnakumar -
Sap Easy Access- Excise realted transactions
Hi,
Can anyone tell me the MENU PATH to do excise related transaction in SAP Esy Access.
In SAP HELP it is written that we can access from Sap Easy Access/ Indirect Taxes, but the same i am unable to see in my system.
Regards
DebasishDear Debasish
run T.Code J1ILN
thanks
G. Lakshmipathi -
I want sap easy access screen as an iview in the portal
Hi ,
I want sap easy access screen as a iview in portal ,how can i do it.
I used SESSION_MANAGER tcode and created a transaction iview but it is going to rs00 tcode screen,
PLZ help meHi
I have created an iview with tcode Session_Manager and it is working fine.What is this txn rs00? When I check this tcode in our ECC 6.0 system, it says rs00 does not exist.
Check your system setting and iview config again.
Regards
Prabhakar Lal -
Changes made through SE43N not reflecting in the SAP easy access
Hi All,
I have done changes through T code SE43N in area menu FIGL. But I am not able to see the T Codes in the SAP easy access. Can anyone help on this issue?
Kind Regards,
YogeshHi,
SAP standard menu is S000 area. By modifying FIGL area you don't update S000.
Regards,
Eli -
How do I change the Apple ID that is stored on my MacBook Air. I have changed my Apple ID on the Apple ID website but both my MacBook Air and my iMac show the old Apple ID when accessing iCloud.
I had this problem on my iMac and fixed it after a half hour of frustrated trying. I had changed my Apple ID on my iPad mini while traveling. When I finally got back home after a few months, I couldn't log in to iTunes on my iMac. The old Apple ID was still being used on my iMac. I tried just highlighting it and deleting it and typing in my new Apple ID. No dice. The login just defaulted to my old Apple ID. I tried clicking on the drop down menu that appears when you right right click your Apple ID that appears at the top of the page after highlighting the 'iTunes Store" in the left side list. I saw "account" so I clicked on that. The "account" settings on my iMac showed my new Apple ID but my iMac wouldn't use it. It just kept defaulting to my old ID. I shut down. I logged back in. Same result. Finally I right clicked the same drop down menu and saw "sign out" at the bottom of the list. Even though I was not signed in to iTunes, I clicked "sign out". My next log in to iTunes showed my Apple ID as blank and I was able to type in my new ID. Hope this helps.
I am a long time 20 year Microsoft user. I am somewhat ( 1 year) new to Apple. With Microsoft, I found that fixing problems was clunky and complex, but there was always a post somewhere that explained the fix. Microsoft's explanations stated even the most obvious fact. Even if everyone knew that the sky was blue, Microsoft's instructions would still tell you that the sky was blue. With Apple, I find that the obvious is sometimes not so obvious. But the fix is almost always easy once you find it, without many of the elaborate maneuvers needed in Windows. -
Is the bluetooth profile - SAP (sim access profile) supported
Is the bluetooth profile - SAP (sim access profile) supported by iPhone. I need this profile in order to allow my car to support complete handsfree.
A quick search on here revealed these existing threads asking the same question:
http://discussions.apple.com/thread.jspa?messageID=11746221�
http://discussions.apple.com/thread.jspa?messageID=11629059�
http://discussions.apple.com/thread.jspa?messageID=11631930�
Short answer is No. -
How to disable sap easy access menu for SAP GUI HTML
hi,
in our portal i created an iview, which calls an SAP-ERP-Transaction, and displays it with the SAP GUI for HTML (webgui). well, i have a big problem: when i got a timeout, the user has to log on to the its and then i get the sap easy access menu.
the users should NOT be allowed to see the sap easy access menu ! they ONLY need to see the called transaction.
any ideas ?
best regards, Martinhi,
i have set the 'singletransaction'-parameter in sicf for the webgui-service to value 1.
BUT: as soon as i click on the iview to display the transaction i got the message
Logged Off Successfully
You have been logged off from SAP Web Application Server.
what is wrong there ?
reg, Martin -
Logon screen in SAP Easy Access
Hi,
I want to add up a new logon screen after the user logs in to the system with his sap user id and password.I want this to happend in SAP Easy Access screen.
This should happen when user tries to enter any transaction in the list box or when he tries to double click any transaction from the sap menu treee or user menu tree.
Is this possible???Hi Martin,
Thanks for the reply......let me tell you my requirement in brief
When user logs in for first time.........in the sap easy access screen Iu2019m starting up a transaction(default transaction, module pool programming with some dialog screen for further login checks which are custom checks).I've achieved it.
Now in our PRD systems the user logs in and we will not be setting up any parameter to him like what we have discussed in transaction RZ11.(to auto log off, if the user is IDEAL for long time).........so there is no question of user sessions getting terminating if he is IDEAL for long time.
My requirement is if THE USER IS IDEAL IN PRD SYSTEM for let say 3 mins or more then my custom screen should pop up again......
Is this possible with the code which you gave me???? -
Can we add our own menu in sap easy access screen
can we add our own menu in sap easy access screen
along with the existing menu items...
ex : can i add the new menu item as help1 on that screen
regards
raghugo to transection se43 ...ther e u can create ur own menu list.. and ur cusomize transection to that perticular menu list.....
You can enter the area menu in the command field like any other transaction code, also in menu exits can be filled with a area menu.
You might play a little with S000 and S001 - when you enter them, the menu tree of easy access changes.
Do you search for the menu exits to append your area menu into the standard menu tree?
Message was edited by: kishan negi -
In ecc6.0 main page SAP easy access.
hi,
in ecc6.0 main page SAP easy access.
it is showing only "favorites" folder.. all other icons are also inactive.. how to rectify thisHi Thiru Malai,
When u login into the sap easy access menu, There you find in the menu bar with name 'MENU'. Click on that you will be shown two options.
one is USER menu and another one is SAP menu . If you are in SAP menu then you find all the folders under favourites.
I think you are in USER menu. If you are in USER menu it doesn't shows the folders there.
Reward points if useful.
Cheers,
Swamy Kunche -
Adding of Custom Report in SAP Easy Access Menu
Hi all,
How can we add the Custom Report in the SAP easy access Menu.
Transaction code can be added thru Favourites, but not the Reports.
Can any one give a ray on this one...
Thanks,
SrikanthSrikanth
If you want to add Z report to esay access first of all you need to create T-code using Tcode se93.
here you need fill some details your progroam name what kind of program it is etc.
Then come to easy accees click on favarities and add that T code.
Maybe you are looking for
-
How to use WBS element in Asset master data upload
Dear All Does any body know how to treat field WBS element in Asset master during upload. Field POSNR in table ANLA is of 8 characters, but WBS element which is entered in asst master is more than 8 char. I vaguely remember tht with wbs system intern
-
Why does redirect page open in a frame?
Why does redirect page open in a frame? I don't see the point. Can it be made to open in it's own window?
-
Google Map Missing; Error Message
Hi! I just published some additional pages. When I went to website, my Google Map is not functioning. I get an Error Message: The Google Maps API server rejected your request. This could be because the API key used on this site was registered for a d
-
This has been happening for several years now. After one of the updates, I started getting the duplicates. I've lived with problem for a long time because I could still get e-mails, if over abundantly. My e-mail volume has gone up and up, however, an
-
Hi, I've just ordered Distiller for Solaris Unix for our publishing system. We've been using a 10-year old version for years. The question I have would pertain to the Windows version of Distiller I have as well. I just want to know if there's any way