ITS Upgrade 6.10 to 6.20 : Changes in services/templates/developments

Hello,
I have to estimate the effort to upgrade from the ITS 6.1 to 6.2 at developer's side. I heard that some changes must be done in services and templates (f.g. ressource files limited to 255 char/line; etc).
I have some questions:
- appart ressource files, do we have to change the html and other ITS files?
- can we keep the ABAP back-end as-it?
- Are some other changes to be done? (appart the upgrade itself)?
Thanks for your answers!

Hello Christophe,
Did you really mean from ITS 6.10 to ITS 6.20? These are both standalone ITS versions that need a web server. In a lot of ways they are very similar and the upgrade process is pretty much just installing the ITS 6.20 and then copying over your custom (services, templates, and mime) files. Do not modify just copy over the standard files (webgui, system, and global.srvc) and you should be fine.
One of the big differences is that we moved from configuration in the registry to xml files...though now that I think about it, I can't even remember if that was with 6.10 to 6.20 or from even earlier!
Edgar
Edited by: Edgar Chuang on Jan 28, 2010 3:26 PM

Similar Messages

Old Appraisal System (SAP R/3 4.7 ITS) upgrade to SAP ECC 6.0, Ehp4

Hello experts,
We are currently on SAP R/3 4.7 (using ITS) and will be upgrading to ECC 6.0, Ehp4 (using Netweaver Portal). This upgrade will be purely technical, no changes to existing talent modules.
Our employee performance appraisals are currently accessed via ITS using the Old Appraisal System. Can you tell me if it is even possible to link the old appraisal system to the NW portal?
If yes, what kind of changes are required here? Which iviews will I need to activate?
All of your advice is greatly appreciated. Thank you in advance.
Dina

hi,
THe old appraisal system runs on ITS , true .
In the new ECC 6 , there is a built in ITS , which should allow you to still run the old services . But it makes sense to explore the newer functionalites offered in EHP4.
Regards
sameer

I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connecti

I can't get FaceTime or iMessage to connect, I enter valid password (tested and works for Apple account) and it won't connect. I have checked all settings, upgrades iOS to 8.3 rebooted, changed Apple acount PW still wont connect. My internet connection is fine Safari works and I can access all sites. I have an iPad 2. Any help on this will be greatly appreciate. iPad 2, iOS 8.3

This is an ongoing problem as you will see by searching the forum.
Out of curiosity, do you have 2 step verification enabled? It was recently extended to include iMessage & FaceTime & I'm wondering if it might be causing some of the issues that some users are experiencing.

I live in USA. I am traveling in Germany and downloaded itunes. Its in German! How do I change to the english version?

I live in USA. I am traveling in Germany and downloaded itunes. Its in German! How do I change to the english version?

Go to the bottom of the screen, click the flag, choose your country.
You can only buy from your country of residence and only while in that country.

ITS Upgrade to 6.20 on EP 5.0 SP4

Hi,
We upgraded the ITS from 6.10 to 6.20 on Windows 2000. The EP Version is 5.0 SP4 on Windows 2000 and R/3 is 4.6C. The ITS upgrade was successful and I was able to publish transaction using W3_PUBLISH_SERVICES program in R/3 and view it by logging into ITS. But, the Entreprise Portal Users could not login into portal once the upgrade was performed even the admin user got locked out. The users are maintained in LDAP Directories. Is there some compatibility issues between IIS 5.0 on Windows 2000 and ESS(Integrated with EP)? Can some provide me help as to why this problem could have occured.
Thanks in advance for all your help.
Many thanks,
Best regards,
Divya Rao

Hi Divya,
Is your problem solved? If so, please grant reward points to helpful SDN user postings and mark this topic as answered.
Best regards,
Henning.

I recently upgraded to ios 6. my apple id was created while i was in india. now i am in singapore. the apple store is not allowing me to upgrade/download apps. i get a "change ur store locaton to in india" msg.. how do i do it?? pls advice

i recently upgraded to ios 6. my apple id was created while i was in india. now i am in singapore. the apple store is not allowing me to upgrade/download apps. i get a "change ur store locaton to in india" msg.. how do i do it?? pls advice

Change country to India
1. App Store>Featured>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region

Why does my ipad says its full charged and its at 1% and it doesn't change?

Like I plug my ipad and it appears the full charged icon when its at 1% and it doesn't change if I unplug it. But when it's plug it doesn't turn off.

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

ITS upgrade from 46D to 620

Hi
I am about to do ITS upgrade from 46D to 620. Could any one please tell me the step by step procedure to do this activity. Whether I need to uninstall 46D and do fresh installation of 620 or is it possible to do an upgrade to 620 without uninstalling 46D?
Please guide me.
Regards,
Vinodh.

Hi Vinodh
I Think the best way to go is Install ITS 6.20 and run both ITS's in parallel until the new ITS is tested, then remove the old ITS.
Best regards
Juan!

Mashe I cant sign in blackberry ID from my phone helpim trying to but it in option blackberry. ID. Its telling me wrong password. I changed password. 10 times and its still telling wrong password. I tryd to put my friend account it working please help

Mashe I cant sign in blackberry ID from my phone helpim trying to but it in option blackberry. ID. Its telling me wrong password. I changed password. 10 times and its still telling wrong password. I tryd to put my friend account it working please help

Check your password agian. If your friends password /account is working then it is your account information. Maybe you have the wrong username/email combo
Developer for easyDial for BlackBerry Bold & inLink for BlackBerry PlayBook
Find me online via twitter, or on the techfruits.com webpage. Please hit the like button below if what I said helped!

Upgraded from 3.6 to 7 - changed nothing else - now takes 50-60 seconds to for the browser to start - works OK after that as long as I keep a window open. I then diabled all plug ins and extenstions - still 60 seconds to load browser.

I upgraded from 3.6 to 7 - changed nothing else - now takes 50-60 seconds to for the browser to start - works OK after that as long as I keep a window open. I then disabled all plug ins and extensions - still 60 seconds to load browser. I also keep getting a high memory warning from AVG with mem usage up to 600,000 k

I upgraded from 3.6 to 7 - changed nothing else - now takes 50-60 seconds to for the browser to start - works OK after that as long as I keep a window open. I then disabled all plug ins and extensions - still 60 seconds to load browser. I also keep getting a high memory warning from AVG with mem usage up to 600,000 k

Issue with PO change output - Service line items

Hi All,
This is issue with PO change output. We have PO with line item 10, 20 and item 10 has 4 service line items. PO is approved and initial print out is taken.
Some one goes and makes changes to 1st service line items of PO line item 10.
A change output gets triggered. When this output is printed, it prints line item 10 details. This is standard functionality as this item is changed. But its printing all the service line items for this PO line item. Consider a case where there are 3000 service lines for a PO item. If I add 1 service item to this PO line item, the change form prints 3001 services for that line item. There were no changes done to first 3000 service line items.
Currently PO change form takes care of changes at PO line item but it does not take care of changes at service line item level.
Is there any setting that needs to be done for this so that it only considers the changes at Service line item level also.
Regards,
Shahu

If you're using a standard form, send a message to SAP. Otherwise make a change in the form.

BADI For Commitment Item Change for Service PO

Hi All,
I want to change the commitment item in the PR on change of Material Group . I used the BADI ME_PROCESS_REQ_CUST for changing the commitment item and its working fine for all types of PR except Service PR .
In service PR , its changing the commitment item only on clicking the Account Assigment button because at this instant only the BADI is getting trigger .
I want to change the commitment item without clicking the Account Assigment button (on pressing enter or at saving time ) .
Is there any way ?
Thanks
Manik L Dhakate

We are using User Exit MEREQ  EXIT_SAPLMEREQ_010
In our PR creation for ME51n, we are validating the Person through HR Org structure at the Point of Key in his Cost Center, whether he belong to his Department cost center, we use this User Exit MEREQ  EXIT_SAPLMEREQ_010. If he doesnu2019t not belong, the message pop up as u201C Please use your department cost centeru201D. This works very good in case of NB Document Type (Non stock & Materials).
We have customized ZCPR (Service PRs), but for service PRs, the place where we enter Account Assignment is Different screen, either it is planned or unplanned service, the system take you to another separate screen to key in Cost Center & GL, here the validation is not happening,
Please suggest & advice us, we tried in this BADI : ME_PROCESS_REQ_CUST, we can fix it. Any User Exit or BADI for Service PRu2019

HT1688 My iphone 3GS is showing no service your network is restriced you can choose a different network in settings ive tried a restore and upgrading software/downgrading still no fix just no service searching...

My iphone 3GS is showing no service your network is restriced you can choose a different network in settings ive tried a restore and upgrading software/downgrading still no fix just no service searching...
I have no idea why this has happend ive been using the phone for 2years bought it on pay as you go and now all of a sudden its stating the above error i have never come across this problem before and currently im using 3GS and Iphone 4S

Sounds like it's been blacklisted.
Even if it hasn't, downgrading voids any warranty and forfeits all rights to support. You hacked your phone. You can't get help here.

Upgrade SQL server 2008 r2 to latest available Service Pack in SP 2010 farm.

Hi,
We have 2 server's in the farm ( WFE+App server and SQL server).
We are planning to upgrade SQL server 2008 r2 to latest available Service pack [10.50.6000 (SP3)] version.
So before upgrading SQL server , need to take any necessary actions from SharePoint server side ?
And once patching is done on SQL server, need to run SharePoint Configuration wizard ?
Please provide best way for this upgrade.
Cheers,
RameshNK

You certainly can turn off SharePoint/stop IIS if you wish, but it isn't required. SharePoint will be unavailable during a portion of the SP3 upgrade and will reconnect once SQL is back online.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Cannot change/edit services in SICF

We just upgraded our ECC system from Netweaver 7.01 SP6 to SP8.
We are having this issue after the upgrade. We can edit the services
that already existed prior to upgrade. But, any service that is created
from SOAMANAGER, cannot be edited in SICF. The error message
says "You cannot use this transaction to change the service"
(Message no. SHTTP824). The error's long text says "This means that
only the application has the authorization to use the defined interface
to modify this service". We need to change the service to use
"Standard Logon Procedure" for a basic authentication scenario. We
could not find any setting in SOAmanager for the logon procedure.
Any help will be very appreciated.

Hello,
There are settings in SOAMANAGER that refer to the log on procedure.
Go to Business-Administration -> Web-Service-Administration and find the WS you would like to edit. Then 'Apply Selection' and go to tab Configuration. There you find settings that refer to the log on procedure.
I hope this will help you!
Best Regards,
Diana Abu-Gosh

ITS Upgrade 6.10 to 6.20 : Changes in services/templates/developments

Similar Messages

Maybe you are looking for