ITS - Uploading file intermediate screen

Dear experts,
I'm trying to upload a file using the function module GUI_UPLOAD, and it works fine. However, is there any way that I can upload the same file without the intermediate screen, that are shown 'because technical reasons'? I know those screen (java applet) is responsible for the execution of the frontend service on the client computer.
Do you know any other function module that I can use? Or any idea to solve this issue?
Thanks in advance for any help.
Regards,
sb.
Edited by: Sara Bernardo on Nov 11, 2008 3:11 PM

hi sara,
these intermediate screens are suppressed since a long time. Can it be that you are on a very old ITS 6.20 patchlevel or for integrated ITS on an old SAP basis support package?
With kind regards,
Klaus

Similar Messages

Upload file box off screen

I've recently had trouble with my macbook while uploading files. I click on the "upload file" button and the box that pops up that lets me choose a file is so large that the bottom is off the screen. This means that I can't click on "upload" or "cancel". The only way I know how to proceed is to click on a file and push the enter key. Does anyone know how to make that box smaller so that it fits completely on the screen?

HI,
Go to System Preferences/Displays. Check your resolution.
Also, try Facebook's Simple Loader.
Hard to see in this pic but under where you see "Cancel" click where you see:
"Try the Simple Uploader" ... much easier to use.
Carolyn
Message was edited by: Carolyn Samit
M

Upload files with transaction CV02N via ITS

Hi,
Is it possible to upload files (Word, PDF, Excel etc.) with transaction CV02N via ITS?
How must be configure the ITS so that this works?
Any ideas?
Thanks,
Marco

Hi Marco,
I dont know transaction CV02N. But if this application uses standard function modules like GUI_UPLOAD it should work with ITS. A special configuration should not be required as long as the files have a size up to 5 MB. If they are larger it might be required to adjust the size of the request container MaxReqSize. Dont forget that Java has to be activated to let webgui access the filesystem.
Regards,
Klaus

TS3694 I tried to update my ipad, now its stuck on a screen with a cable pointing towards itunes and asking me to restore, then it tells me that it wasnt able to restore because of a currupted file. dont know what to do

How do I fix my Ipad, tried to update it, now its stuck on a screen with a cable pointing towards itunes and asking me to restore, but i cant, it tells me that restore was interrupted because of a corrupted file.

If you want to manually download the update go here.
http://osxdaily.com/2013/01/28/ios-6-1-released-download/
If you want to try recovery mode which is what Apple recommends if you are unable to update or restore your iPd, go here.
http://support.apple.com/kb/ht4097

I was working on a project a few days ago and now I'm not getting any audio or visuals out of it. In the project file the screen went grey. Not sure how to fix this. I'm new to iMovie, but the program seems easy to use and my Mac is new. Any help?

I used to use Movie Maker and it would be able to handle lots of file uploads and big projects. I figure iMovie can do the same since it's newer and it's on my iMac. I was working on a project for a few months, it was working fine up until about a few days ago when the project file just stopped working. Not getting any audio or visuals and the screen went grey. I hope to not lose the project file as I've spent a lot of time on it. The project will still show up in iMovie, but it won't play. Other project files will, but this one won't for some reason. It's my first time using this program and I assumed it would be fine, but now it's causing me big problems. Anyone else run into a similar problem?

But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button

How to SCAN uploaded files for VIRUS in APEX

part 1:
Goal:
Do a virus scan of the uploaded file from APEX application prior to storing the file in custom tables.
The process:
Followed the document from www.developer.com:
Implementing an Anti-Virus File Scan in JEE Applications
By Vlad Kofman
Go to page: 1 2 3 Next
This article will discuss one of the ways to implement antivirus file scanning in Java, particular in the JEE applications. Viruses, Trojan Horses, and different malware and spyware are a real problem for current computer environments, and especially for the Windows operating system. If you are designing any application in Java that has a requirement to be able to upload external files, you have a potential security risk. By uploading, I mean any way to get the external file inside of the corporate firewall be it via HTTP protocol or any other means. It is quite common to have this type of requirement in an enterprise application and with Java being one of the most popular web development platforms, it is unfortunate that this type of gaping security risk is quite often overlooked.
Java's Development Kit (JDK) does not have any means to do the antivirus scan right out of the box. This is primarily because Java is a programming language, and does not have any virus scanning packages. Furthermore, anti-virus software is not Sun's area of expertise or business model. Developing this type of software (or Java package), and more importantly maintaining it, would be a huge task for Sun. Mainly because viruses are constantly evolving and keeping virus definitions up-to-date is a daunting task. Large companies such as McAffee, Symantec, or Zone Labs develop virus detecting and combating products and spend a lot of resources to maintain them.
Application Environment
To implement a virus file scan in Java, a third-party package needs to be used. For the purposes of this article, I will use Symantec Scan Engine (SSE) package, which comes with Java APIs. This package is an application that serves as a TCP/IP server and has a programming interface and enables Java applications to incorporate support for content scanning technologies. For this article, I used Symantec Scan Engine 5.1, which is available as a Unix or Windows install.
If you are using an anti-virus package from the different vendor, you will need to investigate what kind of APIs are available; however, the general approach should be similar. Also, note that my implementation can be used with JEE technology and any modern MVC framework such as Struts or Spring.
The architecture is as follows: A server machine needs to have SSE running at all times. This can be the same machine that hosts your Application Server, but in an enterprise environment this should be a different machine. The Default Port needs to be open through the firewall to allow communication with the scan engine. All JEE applications that need to do file scanning can talk to the SSE server machine through a default port. Also, multiple applications running on different application servers can re-use the same scanning server. For more information, you should refer to the Symantec Scan Engine (SSE) Installation Guide, available on the Symantec web site.
When an external file that needs to be scanned is sent to the SSE via its programming interface (Java APIs using the default port), before any other operation on the file is performed, the SSE returns a result code. For instance, a file is uploaded by an external user into the web email type application as an attachment; then, the SSE API is invoked by the application and the return code of pass or fail determines the outcome of the upload and whether that email can actually be sent. If you have an account on Yahoo mail, you probably have seen that Yahoo is using Norton Antivirus to scan all attachments, although no Java.
Click here for a larger image.
Figure 1: Screen shot from Yahoo
For details on the Scan Engine Server Installationm please see the Symantec Scan Engine (SSE) Implementation Guide from Symantec.
Here are some key things to remember about SSE:
•     Java 2 SE Runtime (JRE) 5.0 Update 6.0 or later must be installed on the server before the SSE installation is done.
•     After installation, verify that the Symantec Scan Engine daemon is running. At the Unix command prompt (if it's a Unix install), type the following command:
ps –ea | grep sym.
A list of processes similar to the following should appear:
o     5358 ? 0:00 symscan
o     5359 ? 0:00 symscan
If nothing is displayed the SSE process did not start.
If the SSE process did not start, type the following command to restart SSE:
/etc/init.d/symscan restart
•     Keeping the virus definition up to date is the most important task and if new updates are not installed, the whole scan becomes ineffective. Symantec automatically downloads the most current file definitions through LiveUpdate. Please make sure that firewall rules are in place to allow the host server to connect to the Symantec update service.
Project Setup
For the purposes of this article, I included a wrapper for the Symantec SSE APIs, av.jar, which has Symantec Java APIs and serves as a client to the SSE server and takes care of all communications with the server. Please refer to the download source section. The av.jar should be included in the Java CLASSPATH to work with the SSE. This jar contains a class called AVClient that takes care of actually sending the files to SSE as byte arrays and returning the result.
In my project setting, I added three variables to be accessed via the System.getProperty mechanism. For example:
AV_SERVER_HOST=192.168.1.150
AV_SERVER_PORT=1344
AV_SERVER_MODE=SCAN
The AV_SERVER_HOST is the host name or IP of the machine where Scan Engine is installed.
The AV_SERVER_PORT is the port where Scan Engine listens for incoming files.
The AV_SERVER_MODE is the scan mode which can be:
•     NOSCAN: No scanning will be done (any keyword that does not start with "SCAN" will result in ignoring the call to the Scan Engine and no files will be transferred for scanning).
•     SCAN: Files or the byte stream will be scanned, but the scan engine will not try to repair infections.
•     SCANREPAIR: Files will be scanned, the scan engine will try to repair infections, but nothing else will be done.
•     SCANREPAIRDELETE: Files will be scanned, the scan engine will try to repair infections, and irreparable files will be deleted.
Note: For the file stream (byte array) scanning, the only meaning full values are "SCAN" and "NOSCAN".
Using the SSE Scanning Java APIs
In any class where scan is required, call the scanning API provided in the AVClient object located in the av.jar. The AVClient object will establish connection to the Scan Engine server and has the following APIs:
Figure 2: The significant APIs for the communication with to the Scan Engine Server.
If scanning a file on the file system, in SCAN only mode, use the call that accepts filename only.
If scanning a file on the file system, with SCANREPAIR or SCANREPAIRDELETE, use the call that accepts input and output file names.
If scanning an in-memory file (byte array), use the call accepting byte array.
For example:
import com.av.*;
Initialize setup parameters:
static String avMode =
(System.getProperty("AV_SERVER_MODE") != null)
? (String) System.getProperty("AV_SERVER_MODE") : "NOSCAN";
static boolean scan = avMode.startsWith("SCAN");
static String avServer =
(String) System.getProperty("AV_SERVER_HOST");
static int avPort =
Integer.parseInt( (String) System.getProperty("AV_SERVER_PORT"));
Scan check example for an in-memory file byte array:
public void scanFile(byte[] fileBytes, String fileName)
throws IOException, Exception {
if (scan) {
AVClient avc = new AVClient(avServer, avPort, avMode);
if (avc.scanfile(fileName, fileBytes) == -1) {
throw new VirusException("WARNING: A virus was detected in
your attachment: " + fileName + "<br>Please scan
your system with the latest antivirus software with
updated virus definitions and try again.");
Note that if you are using this code inside of the MVC handler, you can throw a custom VirusException and check for it in the calling method and perform any necessary cleanup. I have included the class in the AV Jar as well.
For example:
catch (Exception ex) {
logger.error(ex);
if (ex instanceof VirusException) {
// do something here
else {
// there was some other error – handle it
For more details on the Scan Engine Client API, please see Symantec Scan Engine Software Developers Guide.
Continuation in part2

part 4:
c)     Clienttester.java – This is the gui app set to test if the configuration is working or not. This gui uses the method scanfile(inputfile, outputfile) as you can see the result in the outputpane of the jframe.
* clienttester.java
* Created on April 12, 2005, 2:37 PM
* @author george_maculley
package com.av;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class clienttester
implements ActionListener {
// private String ipaddress = "127.0.0.1";
private String ipaddress = "199.209.150.58";
//private String ipaddress = "192.168.0.55";
static JFrame frame;
JFileChooser chooser = new JFileChooser();
TextField pathtofile = new TextField(System.getProperty("user.home"), 30);
// TextField pathtooutfile= new TextField(System.getProperty("user.home"),30);
private int port = 1344;
JButton filechooser = new JButton("Browse to file"); ;
private String originalfilename;
private String outputfilename;
JButton scanbutton = new JButton("Scan");
TextArea outputarea = new TextArea(20, 40);
TextField iptext = new TextField("127.0.0.1", 16);
TextField porttext = new TextField("1344", 5);
AVClient mine;
JRadioButton choosescan = new JRadioButton("SCAN");
// JRadioButton choosedelete= new JRadioButton("SCANREPAIRDELETE");
/** Creates a new instance of gui */
public clienttester() {
public clienttester(java.lang.String ip, java.lang.String infile, java.lang.String outfile, int port) {
this.ipaddress = ip;
this.port = port;
this.originalfilename = infile;
this.outputfilename = outfile;
boolean setValues(java.lang.String ip, java.lang.String infile, java.lang.String outfile, int port) {
this.ipaddress = ip;
this.port = port;
this.originalfilename = infile;
this.outputfilename = outfile;
return (true);
public void actionPerformed(java.awt.event.ActionEvent actionEvent) {
JComponent c = (JComponent) actionEvent.getSource();
if (c == filechooser) {
int retval = chooser.showDialog(frame, null);
if (retval == JFileChooser.APPROVE_OPTION) {
File theFile = chooser.getSelectedFile();
if (theFile != null) {
pathtofile.setText(theFile.getPath());
// pathtooutfile.setText(theFile.getPath());
JOptionPane.showMessageDialog(frame, "You chose this file: " + theFile.getPath());
if (c == scanbutton) {
//return object that can be passed to AVClient
String policy;
int thisport;
int scanresult;
String thisip;
String inputfile;
String outputfile;
outputarea.append("Server: " + iptext.getText() + "\r\n");
if (choosescan.isSelected()) {
policy = "SCAN";
else {
policy = "SCANREPAIRDELETE";
thisport = new Integer(porttext.getText()).intValue();
thisip = iptext.getText();
//mine= new AVClient(iptext.getText(),porttext.getText(),policy);
mine = new AVClient(iptext.getText(), thisport, policy);
if (mine.test() == 1) {
outputarea.append("Sorry. Incorrect parameters specified.\r\n");
System.exit(1);
else {
outputarea.append("Connection to SAVSE initialized.\r\n");
inputfile = pathtofile.getText();
// outputfile=pathtooutfile.getText();
outputfile = "/tmp";
outputarea.append("Scanning file " + inputfile + " \r\n");
if (policy == "SCAN") {
scanresult = mine.scanfile(inputfile);
else {
scanresult = mine.scanfile(inputfile, outputfile);
if (scanresult == 0) {
outputarea.append("File is clean.\r\n");
else if (scanresult == -1) {
outputarea.append("File is infected. \r\n");
else {
outputarea.append("Scan error.\r\n");
void display() {
Frame f = new Frame("SAVSE JAVA ICAP Client");
f.setLayout(new GridLayout(1, 2));
JPanel lpanel = new JPanel(new GridLayout(7, 1));
JPanel ippanel = new JPanel();
JPanel portpanel = new JPanel();
JPanel rpanel = new JPanel();
JPanel outputpanel = new JPanel();
JPanel buttonpanel = new JPanel();
JPanel pathpanel = new JPanel();
// JPanel outpathpanel= new JPanel();
JPanel policypanel = new JPanel();
ButtonGroup policygroup = new ButtonGroup();
filechooser.addActionListener(this);
scanbutton.addActionListener(this);
choosescan.setSelected(true);
policygroup.add(choosescan);
// policygroup.add(choosedelete);
buttonpanel.setBorder(BorderFactory.createTitledBorder("Scan Policy"));
buttonpanel.add(choosescan);
// buttonpanel.add(choosedelete);
pathpanel.setBorder(BorderFactory.createTitledBorder("Path to File"));
pathpanel.add(pathtofile);
f.setSize(new Dimension(650, 400));
f.setBackground(Color.white);
f.setResizable(true);
ippanel.setBorder(BorderFactory.createTitledBorder("SAVSE IP Address"));
ippanel.add(iptext);
outputpanel.setBorder(BorderFactory.createTitledBorder("OUTPUT"));
outputpanel.add(outputarea);
portpanel.setBorder(BorderFactory.createTitledBorder("ICAP Port"));
portpanel.add(porttext);
// outpathpanel.setBorder(BorderFactory.createTitledBorder("Path to Repair File"));
// outpathpanel.add(pathtooutfile);
lpanel.add(ippanel);
rpanel.add(outputpanel);
lpanel.add(portpanel);
lpanel.add(buttonpanel);
lpanel.add(pathpanel);
// lpanel.add(outpathpanel);
lpanel.add(filechooser);
lpanel.add(scanbutton);
f.add(lpanel);
f.add(rpanel);
f.setVisible(true);
public static void main(String[] args) {
clienttester g = new clienttester();
g.display();
d)     my2.java – This is the class file I wrote to test that I am able to send a file and scan it and see the output in the JDEVELOPER. In this case the file is stored on the filesystem of the client machine. JDEVELOPER should be able to see the file.
NOTE:
“EICAR.com” is the test file downloaded from Symantec site to test a non malicious virus file. I n order to be able to test it like this, the Antivirus program running on your machine should be disabled, or else Antivirus will kick in and delete the file. In the first place you will not be able to download the test virus file either with anti virus running on the machine you are downloading to.
package com.av;
import java.io.*;
public class my2 {
static int my_return = 0;
* @param fileBytes
* @param fileName
* @return
public static int scanfile(String fileName){
String avMode = "SCAN";
boolean scan = avMode.startsWith("SCAN");
String avServer = "xx";--avserver ip address
int avPort = 1344;
int the_return = 0;
if (scan) {
AVClient avc = new AVClient(avServer,avPort,avMode);
the_return = avc.scanfile(fileName);
if (the_return == -1) {
return (the_return);
} else
return (the_return);
//my_return = the_return;
return (the_return);
public static void main(String[] args) throws Exception {
System.out.println("Hi there in Main");
byte[] b1 = new byte[4];
b1[1] = 68;
my_return = scanfile("c:\\eicar.com");
System.out.println(my_return);
e)     Then finally we have my1.JAVA, which takes the filename, and it’s contents in the bytes form and scans the file. The reason for this method is we are not storing the file on the filesystem, it is read into the memory and only if it is clean, it is put into the database or else notify the user.
package com.av;
import java.io.*;
public class my1 {
static int my_return = 0;
static int a_length = 0;
* @param fileBytes
* @param fileName
* @return
public static int scanfile(String fileName,byte[] fileBytes) throws IOException {
String avMode = "SCAN";
boolean scan = avMode.startsWith("SCAN");
String avServer = "xxx";--avserver’s ip address
int avPort = 1344;
int the_return = 0;
if (scan) {
AVClient avc = new AVClient(avServer,avPort,avMode);
// File file = new File(fileName) ;
//byte[] fBytes = getBytesFromFile(file);
the_return = avc.scanfile(fileName, fileBytes);
if (the_return == -1) {
return (the_return);
} else
{return (the_return);}
my_return = the_return;
return (the_return);
// Returns the contents of the file in a byte array.
* @param file
* @return
* @throws IOException
public static byte[] getBytesFromFile(File file) throws IOException {
InputStream is = new FileInputStream(file);
// Get the size of the file
long length = file.length();
// You cannot create an array using a long type.
// It needs to be an int type.
// Before converting to an int type, check
// to ensure that file is not larger than Integer.MAX_VALUE.
if (length > Integer.MAX_VALUE) {
// File is too large
// Create the byte array to hold the data
byte[] bytes = new byte[(int)length];
// Read in the bytes
int offset = 0;
int numRead = 0;
while (offset < bytes.length
&& (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) {
offset += numRead;
// Ensure all the bytes have been read in
if (offset < bytes.length) {
throw new IOException("Could not completely read file "+file.getName());
// Close the input stream and return bytes
is.close();
return bytes;
// public static void main(String[] args) throws Exception {
//System.out.println("Hi there in Main");
// File file = new File() ;
// byte[] b1 = getBytesFromFile(file);
//System.out.println(b1);
// my_return = scanfile(,b1);
//System.out.println(my_return); }
Finally , you have the exceptions file,
e) package com.av;
public class VirusException
extends Exception {
public VirusException() {
super();
public VirusException(String text) {
super(text);
Once you have all these classes, you can use JDEVELOPER , to load these classes into the database: This is as follows:
Right click on the project, which has all these classes.
NEW -> deployment profiles -> load java and stored procedures.
When you are created deployment profile, you have to specify,
Loadjava options.
-f, -v (check the check boxes)
Under privileges:
-s – specify database schema these classes are loaded into
-s – create sysnonym check box
-g – grant to public or any specific users per your policy.
Under Resolver,
-r and –o (check the check boxes)
I accepted the default name storedproc1. Then you right click on the storedproc1.deploy, deploy to whichever database connection you created.
And then, In order to access this java class we need a pl/sql wrapper as follows:
create or replace package my1 is
function mycheck (pfilename in varchar2, psize in number)
return number;
end my1;
create or replace package body my1 is
     function mycheck (pfilename in varchar2, psize in number)
return number is
language java
     name 'com.av.my1.scanfile(java.lang.String, byte[]) return int';
     end my1;
And the code is invoked from sql plus as follows:
Select my1.mycheck(“filename”, “filebytes”) from dual;
One important catch in the above method is to send the filename and filecontents in bytes form. In order to send the file contents as filebytes, you will need another java class and load into the data base as described above.
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStream;
* This program demonstrates how to read a file into a byte array. This method
* reads the entire contents of the file into a byte array.
* @version 1.0
* @author Jeffrey M. Hunter ([email protected])
* @author http://www.idevelopment.info
public class ReadFileIntoByteArray {
* method to convert a byte to a hex string.
* @param data the byte to convert
* @return String the converted byte
public static String byteToHex(byte data) {
StringBuffer buf = new StringBuffer();
buf.append(toHexChar((data >>> 4) & 0x0F));
buf.append(toHexChar(data & 0x0F));
return buf.toString();
* Convenience method to convert an int to a hex char.
* @param i the int to convert
* @return char the converted char
public static char toHexChar(int i) {
if ((0 <= i) && (i <= 9)) {
return (char) ('0' + i);
} else {
return (char) ('a' + (i - 10));
* Returns the contents of the file in a byte array
* @param file File this method should read
* @return byte[] Returns a byte[] array of the contents of the file
private static byte[] getBytesFromFile(File file) throws IOException {
InputStream is = new FileInputStream(file);
System.out.println("\nDEBUG: FileInputStream is " + file);
// Get the size of the file
long length = file.length();
System.out.println("DEBUG: Length of " + file + " is " + length + "\n");
* You cannot create an array using a long type. It needs to be an int
* type. Before converting to an int type, check to ensure that file is
* not loarger than Integer.MAX_VALUE;
if (length > Integer.MAX_VALUE) {
System.out.println("File is too large to process");
return null;
// Create the byte array to hold the data
byte[] bytes = new byte[(int)length];
// Read in the bytes
int offset = 0;
int numRead = 0;
while ( (offset < bytes.length)
( (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) ) {
offset += numRead;
// Ensure all the bytes have been read in
if (offset < bytes.length) {
throw new IOException("Could not completely read file " + file.getName());
is.close();
return bytes;
* @param filename
public static byte[] chk_file(String filename) {
byte[] fileArray = null;
try {
fileArray = getBytesFromFile(new File( filename));
} catch (IOException e) {
e.printStackTrace();
if (fileArray != null) {
for (int i=0; i<fileArray.length; i++) {
System.out.println(
"fileArray[" + i + "] = " +
((int)fileArray[i] < 9 ? " " : "") +
( ((int)fileArray[i] > 9 && (int)fileArray[i] <= 99) ? " " : "") +
fileArray[i] + " : " +
" HEX=(0x" + byteToHex(fileArray) + ") : " +
" charValue=(" + (char)fileArray[i] + ")");
return fileArray;
* Sole entry point to the class and application.
* @param args Array of String arguments.
public static void main(String[] args) {
byte[] fileArray = null;
try {
fileArray = getBytesFromFile(new File("c:\\eicar.com"));
} catch (IOException e) {
e.printStackTrace();
if (fileArray != null) {
for (int i=0; i<fileArray.length; i++) {
System.out.println(
"fileArray[" + i + "] = " +
((int)fileArray[i] < 9 ? " " : "") +
( ((int)fileArray[i] > 9 && (int)fileArray[i] <= 99) ? " " : "") +
fileArray[i] + " : " +
" HEX=(0x" + byteToHex(fileArray[i]) + ") : " +
" charValue=(" + (char)fileArray[i] + ")");
Having main method helps you to run the file in JDEVELOPER or using JAVA.
DO not forget to load this class into the database.
And you create the pl/sql wrapper again as follows:
create or replace FUNCTION TOBY (pfilename in varchar2) RETURN VARCHAR2 iS
language java name
'ReadFileIntoByteArray.chk_file(java.lang.String) return byte[]';
And you call the function from sqlplus as follows:
Sql>Set serveroutput on size 20000;
Sql> call dbms_java.set_output(20000);
Sql> Select toby(“filename”) from dual; --
this file should be accessible, I mean you will not be able to send a file on your pc, from sql plus as sql/plus is running on your db server.
You will be able to see the output in sql plus:
If you are running it from the APEX:
When we use file browser widget from APEX, the file is stored in APEX_APPLICATION_FILES table. And we retrieve that into a variable and pass this variable to the function as follows:
DECLARE
scan_failed EXCEPTION;
x varchar2(400);
z number;
BEGIN
select filename into x from wwv_flow_files where name = :P1_FILE_NAME;
select my1.mycheck(x,toby(x)) into z from dual;
if z = 0 then
:P1_SUBJECT:= 'PASSED';
else
:P1_SUBJECT:= 'FAILED';
end if;
:P1_SCAN_RESULT := '** Scanning File **';
IF UPPER(:P1_SUBJECT) = 'PASSED' THEN
BEGIN
:P1_SCAN_FLAG := 'PASSED';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** File passed scan **';
END;
ELSIF UPPER(:P1_SUBJECT) = 'FAILED' THEN
BEGIN
:P1_SCAN_FLAG := 'FAILED';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** File failed scan **';
END;
ELSE
BEGIN
:P1_SCAN_FLAG := 'UNKNOWN';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** Scan Is Not Conclussive **';
END;
END IF;
--IF :P1_SCAN_FLAG = 'FAILED'
-- THEN RAISE scan_failed;
--END IF;
EXCEPTION
WHEN OTHERS THEN
DELETE from APEX_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
RAISE_APPLICATION_ERROR (-20000, 'seb OTHERS error encountered - file upload not allowed. Possible virus detected !');
raise;
END;
ACKNOWLEDMENTS:
1) JOHN SCOTT – who suggested this ICAP API in one of the threads which is my initial starting point in this direction.
2) VLAD KOFMAN who wrote the article on WWW.DEVELOPER.com
3) Mr. KIRAN –One of the engineers from Metalink, who helped me at every step of getting this java programs and pl/sql wrappers working. But for him, I would have not completed my project.

I am unable to upload files via web browser

Good morning
I have just upgraded to Mavericks (10.9.5), and I am running into a weird issue. I am unable to upload any files via the web browser. If I go to a website, and select an Upload File option, I am taken to Finder, where I am able to select the file, and press attach. The issue comes when I press upload on the website. It always either times out, or gives me an error that I was disconnected from the server. This happens on Safari, Firefox, and Chrome. I'm not sure what to do... I've repaired disk permissions and tried a lot of different security settings, but I am stumped.
Thank you

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Upload file without asking user for the file

Hi,
I need to upload a file to server, but from my code, not using the file upload from page.
I have created a xml file and I need to upload to server when user open a web browser (without asking user to select a file).
How do I proceed??, or what kind of libraries do I must use?
thanks

davisote wrote:
Hi,
thanks for answer.
Let me try to explain again (I think its very simple).Simple, yes. But not very thorough.
I have developed a web application using JSF.So all the code is running on the server, right? There are no Applets, Applications or WebStart applications involved. Right?
My application has a splash screen where I show data. I have developed a bean to connect to my database (sql server), extract this data and create an xml (using DOM) file like:
<news>
<simplenews id="1"> Value </simplenews>
</news>And that bean runs ... where? Server again?
(important step) Once I have created the xml file in my bean I want to upload to the server to a place like /WEB-INF/news.
If the code is running on the server, then "uploading" is the wrong term, as there's nowhere to upload to, since you're already on the server.
This may sound like nit-picking, but you're sending us on a wrong trail with this phrase.
Once the file is on the server with another bean I read the xml fileWhy don't you simply store it in the application scope and let everyone access it from there? It doesn't sound as if the XML is huge.
As you can see I haven't a web page where to show an upload file componetYou also don't want to "upload" anything from the client, from the sound of it.
You simply want to transfer data between to server-side components, if I understood you correctly.

Display uploaded file on JSP page

Hi All,
I want to display uploaded file in JSP.
Initially I am displaying File Name after saving the file & click on edit link.
i.e on JSP Page I have File Upload component & save button.With that save button I am saving my file to databse.
So when I click on edit link I am getting that file name from Databse then I am displaying it.
But now I want to display uploaded file name on JSP page before saving to databse.i.e I will have browse & Upload button.When I click on browse button I will open window from where I will select file.
This is working fine as,<x:inputFileUpload id="uploadfile" value="#{errorLotBean.file}" storage="file"></x:inputFileUpload>
But when I click on upload button that uploaded file should be displyed there only.Can anyone please tell me how to do this ?
Thanks
Sandip

Thanks a lot Siefert,
I tried the way mentioned in URL.
But what if I want to display all uploaded file on my screen.
i.e. If user click on browse & select File A then click on upload button.
(Here the File A will be displayed) with code
<h:outputtext value="#{benaName.file.name}"
But what if after displaying File A if user decide to upload another file File B.
How to display that ?
with <h:outputtext value="#{benaName.file.name}" its dispalying one file only.
Thanks
Sandip

Can't upload files to builder on new glassfish install

Hi,
Running Application Express 4.1.0.00.32 on Oracle Glassfish Server 3.2.1. Our new install is up and we are getting our applications mostly up and running but encountering one weird thing. We can't upload any files to the Apex builder, e.g. an image export or an application export. After browsing to the file clicking "next" on the import wizard generates a message "File must be selected for upload" and the path just specified dissapears from the screen.
Sorry to post on the listner forum, but this "feels" like some kind of a front end issue with the new install. Others are posting similar threads on the apex forum and saying its a glassfish bug how to upload files to apex
That post refers to another off forum post where you can download a glassfish patch. But hey, I'm paying for an official Oracle glassfish, do I need to post an sr for this?
Thanks,
Steve

Hi Steve,
we discussed that issue here even before the thread you've referenced: {message:id=10205967}
Of course, this fix is intended to be used for GF OSE, not the officially supported version.
But hey, I'm paying for an official Oracle glassfish, do I need to post an sr for this?That's how you get support for this. Possibly "My Oracle Support" (formerly known as Metalink) already has a bug filed for this and an official patch to be downloaded. This forum is not intended to replace or duplicated contents that the official product support has published.
By the way, your version number seems to be inaccurate: The most recent Oracle GlassFish Server available today is 3.1.2.2. If you are running on 3.1.2, you should download Patch 147904-06 (assuming you are on Linux; search the corresponding patch for your OS if different). This will update your GF to 3.1.2.2, which is what Oracle Support will usually ask you to do if you open a service request for a product running on an older patch level.
-Udo

Unable to view/download uploaded files

I am new to this, however I believe I can leverage its
usefulness quite well within our apartment community. I am testing
this in order to see if we want to use this at our community on a
daily basis. What I did was upload a file. That went okay. Now I am
trying to view the file and it seems like it is stuck on a some
type of perpetual cycle. What I did was simply click on the link to
my uploaded file. The dark screen now has a rotating green disk on
the right side of a phrase stating, "The preview for this document
is being generated. Please wait, or if you prefer you can download
the document right away."
I let it run all of last night and all day today. Tonight it
is still trying to generate a preview of the Microsoft Excel 2007
document. Is there something that I am doing incorrectly?
electrode49

Hello electrode49,
Apology for not seeing this post until now, but I wanted to
get you a response in case you were still running into some
trouble.
How is it going?
As some background information here, we do not create
previews for MS Excel documents, so that may be sitting for some
time. If you do get to the next screen, you will probably see a
message like, "This file cannot be previewed. Please download it
instead."
Let us know if you're still having problems, or just your
comments!
Cheers,
Pete

Creaky MuVo battery pack? Also, warmness after uploading files (renamed thre

Sorry to keep making threads about little things, but I reckon it's worth checking. My MuVo feels quite a bit hotter after I upload files to it (completely fill over USB2.0 usually). It cools down in a few minutes, but I thought I'd check to see if it's normal behaviour. If it's relevant, the USB connector on the main bit (with the controls) is squint (angled towards the screen face of the player).
Also, my battery module's a bit creaky. When I press buttons on the player or swap the battery I can feel it creaking into different positions. The main player doesn't do this on its own, so I'm wondering if all the battery modules are like that. If not, I might send off for a new battery module as it's only about ?9 and it'd really improve the feel of the player (I hate cheap-feeling plastic if it's something I'm handling a lot).
Edit- Just to elaborate on the "creaky" thing, the battery pack feels really loose and plasticky on its own and when the main player bit's plugged in. This makes the whole thing feel a bit fiddly, creaking when I press down on buttons or the scroller, when in fact the player bit itself feels solid on its own.
Now, if I pop the player in the belt clip holster widget, it suddenly "tightens" up, presumably because the holster is pressing in around the player. It feels really, really solid. Is the problem shared by all the battery packs, or have I just mistreated mine a bit's If it's the latter I'll nab a new battery pack.Message Edited by Sockatume on 06-20-2005 03:44 AM

My Zen Micro heated up a bit when I was charging/transferring files too. I just unplugged it and in a few minutes it was fine. So that seems to be normal. Don't know about the other problem though, sorry.

How to upload file from a client machine to server machine

hei evryone!
can anyone pls help me on how i can upload file from a client machine to another machine (or server). using jsp.Then later on, i can also retrieve the names of these files to place it as values for option tag in an html form.I have a seperate screen for uploading the file and the screen for displaying all the files that were uploaded on the server...
any sample code/ ideas would be much appreciated.Thx!!!!

hei evryone!
can anyone pls help me on how i can upload file from a client machine to another machine (or server). using jsp.Then later on, i can also retrieve the names of these files to place it as values for option tag in an html form.I have a seperate screen for uploading the file and the screen for displaying all the files that were uploaded on the server...
any sample code/ ideas would be much appreciated.Thx!!!!

How to upload file from Application Server?

Dear Friends,
How to upload file from Application Server?
Plz. with example...
Regards,
Dharmesh

hi,
check the code for upload from application server.
tables: kna1.
types: begin of s_file,
         customer type kna1-kunnr,
         country type kna1-land1,
         name     type kna1-name1,
         region   type kna1-regio,
       end of s_file.
*--Internal tables
data: it_file type s_file occurs 0 with header line.
*-- Selection screen
selection-screen: begin of block b1 with frame title text-001.
parameter: p_file type rlgrap-filename default 'C:/customer.txt'
obligatory.
selection-screen: end of block b1.
*-- At selection screen
at selection-screen on value-request for p_file.
perform file_help using p_file.
*-- Process File
start-of-selection.
perform upload_file using p_file.
*-- write File data to o/p
end-of-selection.
perform write_data.
*&      Form file_help
form file_help using    p_p_file.
data: l_filepath type ibipparms-path.
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
   importing
     file_name           = l_filepath
p_p_file = l_filepath.
endform.                    " file_help
*&      Form upload_file
form upload_file using    p_p_file.
call function 'WS_UPLOAD'
   exporting
     filename                      = p_p_file
     filetype                      = 'DAT'
IMPORTING
FILELENGTH                    =
    tables
      data_tab                      = it_file
   exceptions
     conversion_error              = 1
     file_open_error               = 2
     file_read_error               = 3
     invalid_type                  = 4
     no_batch                      = 5
     unknown_error                 = 6
     invalid_table_width           = 7
     gui_refuse_filetransfer       = 8
     customer_error                = 9
     no_authority                  = 10
     others                        = 11
if sy-subrc <> 0.
    message i001.
endif.
endform.                    " upload_file
*&      Form write_data
form write_data .
loop at it_file.
    write:/ it_file-customer, it_file-country, it_file-name,
            it_file-region.
endloop.
endform.
regards,
keerthi.

Itunes Producer Problems Uploading - File not saving - file does not Exist.

Can someone please help me out, this problem is killing me. I've uploaded over 200 UPC Albums using Old G3 and Elderly ITunes Producer, but apple asked me to upgrade, so new machine to me Macmini maverics 10.9.? ITunes Producer 3.1.
So I click open ITunes producer 3.1. Click on make project from Audio
Files. Name and Save the project in Music-ITunes Producer-Playlists.
Plug in my external Flash drive and import the 40 Audio files for the
project. I am using an external flash drive as I can’t get ITunes Producer to
see my internal hard disk, I do not know if this is normal??
Go through the process of saving the project to Music – ITunes Producer –
Playlists – in this case 5060101121313
I then go through name all Tracks and make sure that all Data is correct.
Then when I finally go to either save the document or send it to you I get the
first Screen shot saying
"The Document "5060101121313" COULD NOT BE SAVED. The File does not exist".
As I say I have delivered 200 UPC’s to you with the old software and never
had any problems, I am in urgent need of making significant delivery to you so
would appreciate you help ASAP.
Paul

I have been victorious. Now I am going to post my solution for all those that may have the same problem in the future. I'll even throw in a few key words so it will be more easily found by the search engine.
Connection conn = null;
        try{
            //connect to database
            DAOManager dao = new DAOManager();
            conn = dao.connectToDB();
            String query = "update ASSIGNMENT set file_object = ?, filename = ?, filetype = ? where a_key = 1"; //sql query
            PreparedStatement pstmt = conn.prepareStatement(query);
            ByteArrayOutputStream baostream = new ByteArrayOutputStream();
            //write to output stream
            byte[] buffer = new byte[1024];
            int len = -1;
            while ((len = instream.read(buffer)) >= 0 )
                baostream.write(buffer, 0, len);
            baostream.flush();
            byte[] filebytes = baostream.toByteArray();
            baostream.close();
            pstmt.setBytes(1,filebytes); //set blob
            pstmt.setString(2,filename);
            pstmt.setString(3,filetype);
            pstmt.executeUpdate();
            pstmt.close();
        catch (SQLException e) {
            System.out.println(Tools.getLoggingDate() + " upload() Error uploading file -- " + e);
            e.printStackTrace();
        catch (Exception e) {
            System.out.println(Tools.getLoggingDate() + " upload() Error: " + e);
        finally {
            try{
                conn.close();
            }catch (SQLException e) {}
        }Keywords: setBinaryStream(), setBytes(), MySQL, upload file, InputStream, Blob

ITS - Uploading file intermediate screen

Similar Messages

Maybe you are looking for