Its Urgent Folks.............Please help

Hi All,
i have created new DB instance as QADB and i have copied some dump DB to it, I mean i replaced the original files.But now when i tried to log in as sys/sys@qadb as sysdba,i'm getting error as insufficient privileges.
please friends help me to overcome this problem.Its very urgent............
Thanks in advance
- pravin

Hi Pravin,
when i tried to log in as sys/sys@qadb as sysdba,i'm getting error as insufficient privileges.I would start by ensuring that SYS has the "dba" role granted.
The docs note:
ORA-01031: insufficient privileges
Cause: An attempt was made to change the current username or password without the appropriate privilege. This error also occurs if attempting to install a database without the necessary operating system privileges. When Trusted Oracle is configure in DBMS MAC, this error may occur if the user was granted the necessary privilege at a higher label than the current login.
Action: Ask the database administrator to perform the operation or grant the required privileges. For Trusted Oracle users getting this error although granted the the appropriate privilege at a higher label, ask the database administrator to regrant the privilege at the appropriate label.

Similar Messages

Decompiler problem of java class..its urgent. Please help

When trying to open a class through Java Decompiler, error message "jad.exe has encountered a problem and needs to close. We are sorry for inconvenience." is shown. The class file (when compiled through build ANT set-up) is getting corrupted for uknown reasons. However, when the same source is compiled through Jdev, the classfile is perfectly ok.
Note: Both the JDev and Build env are pointing to same jdk version (1.4.2)

did you try to investigate the differences in the configurations for the ant build and the one with jdev?

As a new MacBook user I plug in my USB Flash Drive but don't know how to access its contents. Please help. Thanks.

as a new MacBook user, when inserting my USB Flash Drive, I do not know how to access its contents. Please help. Thanks.

Open a new Finder window, Finder > File > New Finder Window, and it should appear on the left under Devices.
If you don't see it there, or to get it to show up on the Desktop: Finder > Preferences... General tab, check External disks to have it show on the Desktop, Or Sidebar tab, check External disks under DEVICES.

My iTunes library will no longer sync to my iPhone or iPad, nor will it play from my Mac. My Library is on my external HD. iTunes is correctly looking to the HD as its library. Please help...

My iTunes library will no longer sync to my iPhone or iPad, nor will it play from my Mac. My Library is on my external HD. iTunes is correctly looking to the HD as its library. Please help...

Guys, I found another user and what he said to do worked!!! I have copied the information below:
This was 1 of the things that happend to me too, the other one was that at the bottom of the itunes page were it says all the memory info, it marked that I had over 3gb of other memory wich I didn't.
Anyways what I did was to unmark the calendar, contacts etc. ( so that they wont sync with the computer ), pressed apply, then I marked all of them again, apply again and for last I pressed Sync wich is at the bottom right coner by the apply botton.
I'm not sure that had anything to do with it but it worked, my music appeard both of my itunes playlists and the ones I bought in itunes. Also the other memory dissapeard and it's all good.
I'm not sure this will help you but thats my 5 cents, if the problem continues its better to call customer service and ask for a technician.
Hope your problem gets solved. Have a nice day.

I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

There is a problem with my apple watch.it is not working well .There is a problem in its charging .The repairers says that contact to your company and ask them to provide you its software. Please help me.

There is a problem with my apple watch.it is not working well .There is a problem in its charging .The repairers says that contact to your company and ask them to provide you its software.
Please help me.

Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
As to your issue, Apple does not and never has made a wristwatch as such. The only thing close to a watch that they have made was the 6th-generation iPod nano:
http://support.apple.com/kb/ht1353#iPod_Nano_6G
which has a clock feature and which some people have worn as a wristwatch. Is that what you mean?
Message was edited by: varjak paw

Hi my ipad air wont charge unless its turnt off please help i just boght a new charger it still wont work

hi my ipad air wont charge unless its turnt off please help i just boght a new charger it still wont work

Hi When you change your iPad, even if its off it will, turn on when you connect, to charger Check lightining port for any bits. Do a Reboot press &hold power button & menu button hold both down until you see Apple Logo This may help. Cheers Brian

My ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.

my ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.

Hi
Thanks for the support but I had already tried this . Again did it as you advised. Still not able to connect the ipad mini with Bluetooth.
Could it be that some app is causing issue. I can connect my car and computer over Bluetooth but not ipad mini.
On the other had ipad is connecting to other iPhone but only not mine.
Still showing ipad not supported message. And also shows not paired.
Please help.

I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!

I bought an iphone 5 from one of my friends and unluckily I had yet lost his contact, I had update this iphone to IOs 7 and now it's be locked at iCloud because there was no password . Actually I dont know what I must do for its. Experts, please help me!

The friend who sold it to you needed to clear his Apple ID off the phone before he sold it to you. Of course if it wasn't his phone in the first place then he could not do so. He is your friend but you don't know where he is?
There is nothing that will help you short of getting the password for the Apple ID from your friend. If you cannot obtain that there is no workaround.

My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!

My macbook Pro 13" 2013 has a mouse problem, its not moving naturally, and keeps on moving around like its dancing. Please help solve this!!

Go step by step and test.
1. Restart
2. Shut down the computer.
    Clean the trackpad with moist not wet microfiber cloth.
    System Preferences > Point & Click
    Try turning off three finger dragging and then turning it on after testing.
3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
4. Reset PRAM:   http://support.apple.com/kb/PH14222
5. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
6. Close all windows and quit all applications.
    Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
    Select Disk Utility from the drop down. When the Disk utility window opens up,
    select Macintosh HD, then First Aid.
    Click Repair Disk Permissions button.
    Ignore the time remaining estimate.
    Last 1 minute may take longer.

WF_DEFERRED (443 300) its crossing threshold    please help how to troub

WF_DEFERRED (443 > 300) its crossing threshold please help how to trouble shoot it

Handle:      798141
Status Level:      Newbie
Registered:      Sep 28, 2010
Total Posts:      76
Total Questions:      25 (17 unresolved)
So many questions & so few answers.
http://www.lmgtfy.com/?q=oracle+WF_DEFERRED

Problem in HTMLB :( Very very very URGENT..Please help

Hello All,
I have a problem in HTMLB.
<u>Scenario</u>:
1. Am implementing a JSP DynPage Portal Component.
2. Have a class called "BeanOrderDetails", which consists of an Object table and mapped fields like ModelNo, Qty, etc as the Column Names in this class.
3. The class using JSPDynpage is called "NewOrder.java".
This class instantiates the above bean class and calls a jsp file calls "NewOrder.jsp".
4. NewOrder.jsp - uses HTMLB taglib style. consists of a form and set its layout to GridLayout. It further calls another JSP file which consists of all other GUI objects, called "i1_NewOrder.jsp".
5. i1_NewOrder.jsp - creates instances of GUI Objects like InputField,etc and adds these instances to the GridLayoutCell.
Question:
i> I have to create a button called "Add NewLine" such that when the user clicks on it, an empty row should be automatically generated in the above table, which is created as in step 1.
Where should I add this button and where would the event be handled?
Please help. URGENT......
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Hi Ritu,
I had a very similar problem. The default TableViewModel does not support adding rows at runtime. You have to extend the TableViewModel for this - don't worry it is easier as it sounds.
Look here for the solution which was given to me by Detlev Beutner:
How to add a row in TableViewModel?
I hope this helps.
Best regards
Francisco

When not touching any sound buttons, it goes all the way up to full on its own? please help!?

My iPhone is reasonably new. When just holding the phone (Not touching any buttons) It will turn the volume up all the way on its own and the "ringer" picture will not go away until I hold down the ( - ) button. about 5 seconds later it will re-appear and the ringer will be turned up all the way again. Someone please help! I'm going crazy!

- Try directly downloading/installing it on the iPod. As long as yu are signed into the same iTunes account that originally purchased it you will not be charged again.
- Reset the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

How to adjust ALV size in ITS application? Please Help!

Hi Experts,
I have a ABAP program that shows a ALV report using function module - REUSE_ALV_GRID_DISPLAY.
This ABAP program I have web enabled using ITS (SICF transaction).
When I see the ALV on the browser, It has only 10 rows but still vertical and horizontal scrollbars are dislayed for the ALV itself. Moreover the horizontal scrollbar is shown near the browser status bar. So Unnecessarily blank space is shown in the ALV after 10 rows.
I have even tried ~ALVGRIDPAGESIZE = 10. But it has no affect. I am using SAP 6.20.
So how to control the scrolling and ALV dispaly size?
Please help!
Thanks
Gopal

hi
good
go through these links, i hope these ll help you to solve your problem,
http://www7.sap.com/sweden/pdf/coursecatalog.pdf#search=%22ADJUST%20THE%20ALV%20SIZE%20IN%20INTERNET%20TRANSACTION%20SERVER%20APPLICATION%20%2C%20SAP%22
thanks
mrutyun^

Swings Urgent Requirement, Please Help me

Hi ,
I have a requirement like when a file dialog is displayed, I have to select only directories/folders. Now with using JFileChoser , I am able to choose file . Is there any possibility to choose only directories without file dialog or atleast by using filedialog?. If some solution Please help me as this is urgent requirement.
Thanks and Regards,
Rajeev L.

JFileChooser has an instance method public void setFileSelectionMode(int mode)
call when initialising the file chooser.
chooser.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY );

Popupkey_lov_from_query unusual behaviour..Urgent..please help

Hi All,
I have a SQL region -
select c001,
htmldb_item.select_list_from_query(2, c002, 'Select product_family_name d, product_family_id r from grp_product_families, 'onChange=doSubmit()', 'YES','-1000','Select') c002,
htmldb_item.popupkey_from_query(3, c003, 'Select product_module_name d, product_module_id r from grp_product_modules where product_family_id = '''||c002||'''') c003,
seq_id,
collection_name,
c002 displayonly
from htmldb_collections
where collection_name = 'PROD_IN_DB'
Here, when I run the page and lets assume this query returns 4 rows. Then the first 2 rows Popup LOV will return the same set of records (Taking the product_family_id = c002 of the second row). Also, if I select something from the Popup LOV then the value instead of going into its own place holder goes to the Popup LOV placeholder of the previous record.
Am i missing something.
Please help.
Thanks in advance,
Monika

Is this a bug. I am using HTMLDB 1.5
Any workaround for this.
I tried creating custom popup. Now, the custom popup gets populated correctly. But, here I dont know how to pass back the value to the calling page. The value now has to be passed to a report updateable column and that too in the correct row.
For e.g, if the report of the calling page returns 4 rows (1,2,3,4) and I call the popup of the second row, then the popup should pass back the value selected into the second row column only.
I should have something like this on the popup page
opener.document.getElemenyById("Name of the report column with correct sequence id") := value;
The name for this eg will be - HTMLDB_APPLICATION.G_F002(2)
Any help will be appreciated.
Thanks
Monika

Its Urgent Folks.............Please help

Similar Messages

Maybe you are looking for