Its urgent.Please send me the solution.
Please find me a solution for the specifications.
Its urgent.
Please send me the details as early as possible.
Requirements:
1. EDI Invoice requires populating bottle UPC number not case UPC in IDOC and also populates customer PO number when invoice billing type is a credit. These changes need to be reflected on EDI invoice (Idoc INVOIC02).
Investigation:
Requirement 1. EDI invoices are populating segment E1EDP19 qualifier 003 based on the unit of measure in the line item. If shipment unit is CSE then it populates CSE upc, if shipment unit is EA then it populates Bottle UPC.
a. It was found that the UPC populated on the EDI invoice was being read from material master Additional data tab. (Field SMEINH-EAN11). For the EDI invoice, the customers expect the bottle UPC on this column.
Requirement 2. Need to always populate Segment E1EDK02 Qualifier 001 (customer PO) on the INVOIC02 idoc. Standard SAP populates this information only when the billing type is F2 (regular invoice) and if the customer PO was entered in the Sales Order.
a) Premier requires this information to be populated in the idoc if the billing type is G2, RE, L2 also.
Solution:
Requirement 1.
IDOC_OUTPUT_INVOIC function module needs to be changed to always populate the UPC number for the bottle UPC in segment E1EDP19 qualifier 003, field IDTNR. This number is found on the material master Basic data 1 view. Field name is MARA-EAN11. Please see screenshot of where in the material master to find the bottle UPC.
a. This change applies to all billing types (F2, G2, L2, RE etc).
Requirement 2.
Change IDOC_OUTPUT_INVOIC function module to always populate customer PO information in Segment E1EDK02 qualifier 001, field BELNR.
If billing type is equal to G2, L2, RE and VBRK-XBLNR not equal blanks then make BELNR = VBRK-XBLNR.
Segment: E1EDK02
Field: QUAL = 001
Field: BELNR = VBRK-XBLNR
Waiting for your immediate reaction.
Thanks,
Chandra.
Please provide me a solution
Similar Messages
-
hi ;
i'd like to ask you about my iphone 3G. I was installed updating it requared sim card when i insert it , the iphone stopped installing update ,please send me solution .
<Personal Information Edited by Host>This forum does not work that way.
If you ask a question that can be answered we wiil answer it it here.
So far you have not done that.
Allan -
Hi All,Please send me abap-hr material .Its urgent please.
Hi All,Please send me abap-hr material .Its urgent please.
These are the FAQ's that might helps you
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.sapgenie.com/sapfunc/index.htm
http://www.sap-img.com/abap/sample-hr-reports-allocate-petrol-allowance.htm
http://www.sap-img.com/hr021.htm
http://www.sap-img.com/human/hr-faq.htm
http://www.sap-img.com/human/finding-the-list-of-hr-module-tables.htm
additional info......
Download the ABAP e-book for HR in the below link under the section 'Free ABAP eBook Download'
http://www.sap-img.com
Also have a look at the following links-
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://planetsap.com/index.htm
http://www.atomhr.com/library_full.htm
http://www.sap-basis-abap.com/saphr.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/60/d8d8c7576311d189270000e8322f96/frameset.htm
http://www.sapfriends.com/sapstuff.html
http://www.atomhr.com/know_preview/Reading_Payroll_Results_with_ABAP.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?track=NL-142&ad=500911#Payroll
http://www.sap-press.com/product.cfm?account=&product=H967
http://www.sapdevelopment.co.uk/hr/payres_abap.htm
http://www.sapdevelopment.co.uk/hr/payres_tcode.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
you can see some Standard Program examples in this one..
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification -
Please send me a solution to resolve the error
Please send me a solution to resolve the error: IPHONE5, IMEI number ****. The installation of Firmware to version IOs 7.0.2 via WI FI, failed and the update does not happen, the phone rebooted and the connection icon ITUNES, when you try to re-install the Firmware via ITUNES, fails error-9, with a try through Windows-error 14, when installing Firmware via DFU the same error. What to do? The warranty period number to November 5, 2013
<Edited By Host>Hello rte05,
The following article provides information regarding both errors encountered, and steps that can help get the update process working.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers,
Allen -
Could you Please Send me the Step by Step guide for the BADI
Hi ABAPers,
Could you Please Send me the Step by Step guide for the BADI.It is very Urgent
Thanks & Regards,
Ashok.Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction .
YOu can go through these links...
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
just refer to the link below. it will of great help to u.
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
(SAP link- ultimate material )
suppose your working for XK01 then for that the BADI being VENDOR_ADD_DATA then this implemetation procedure.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. VENDOR_ADD_DATAand press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Z_VENDOR_ADD_DATA
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. VENDOR_ADD_DATA) and double click on the method name
for example within VENDOR_ADD_DATA contract is a method
8. When changes have been made activate the implementation
BADI(Business Add-In) is the object oriented method of user exits...
Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction
Intro.....
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Check these links for info about badi..
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/web/BAdI
http://www.allsaplinks.com/badi.html
New to Badi
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Business Add-Ins
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits (SMOD/CMOD [Page 40]), two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-system infrastructure (SAP and customers), but instead allow for multiple levels of software development (by SAP, partners, and customers, and as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time.
In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example). All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard.
A single Business Add-In contains all of the interfaces necessary to implement a specific task. In Release 4.6A, program and menu enhancements can be made with Business Add-Ins. The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activate adapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/eb/3e7cf7940e11d295df0000e82de14a/frameset.htm
Badihttp://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
sample code for Purchase requisition
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method : POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
IF l_s_eban-estkz NE 'B'.
CLEAR v_mtart.
SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
ENDIF.
ENDIF.
IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
IF l_s_eban-knttp NE 'A'.
IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' ) AND l_s_eban-matnr EQ
space.
MESSAGE e000(zm_msg) WITH 'You cannot create' 'a PR without material number'.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDMETHOD.
Reward points for useful Answers
Reward if it helps.. -
Hi
i want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.Hello there ypda75,
I have an article here that has a list of settings to get from your Email provider so you can make sure that the settings are correct. It has troubleshooting steps to try as well. Also I would recommend restarting the router, and/or testing a differnet network.
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899.
If you are unable to send or receive email, try the following steps:
Restart the iOS device.
Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
Try an alternative Internet connection.
If your email is provided by your Internet provider, try connecting from the home network.
If your iOS device has an active cellular data plan, try to disable Wi-Fi: Tap Settings > Wi-Fi and turn off Wi-Fi.
If not, try a different Wi-Fi network.
Log in to your email provider's website to ensure that the account is active and the password is correct.
Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
All the very best,
Sterling -
Can you please send me the full partial reset instructions.
I've reset the printer dozens of times. Even hooked it to a new computer. Also this is clearly a chronic problem with the equipment. Has HP done anything to correct the problem?
Can you please send me the full partial reset instructions.Hello mrsfixxit,
Welcome to the HP Forums.
I would like to assist you with resetting the printer.
So I can better assist you, please respond with your printers Model Number:
How Do I Find My Model Number?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
No longer authorized to enter the account was used to five devices have exhausted all attempts to please you to the solution to this problem I reside in recursion and I'm not good at English Language
MMS will be available for the 3G and 3GS in two weeks - on Friday, September 25th - likely with a carrier update made available via iTunes.
In the interim - for the next two weeks, ask the sender of an MMS to address the MMS to an email address that you access with the iPhone's Mail client - the sender will enter your email address in the To: field for the MMS instead of your cell phone number with area code. The MMS will be received by you as an email with the photo as an attachment. This will give you the sender's cell phone MMS email address. Add this email address to the contact's info in your iPhone's address book. If you want to send an email with a photo attached as an MMS to this person, address the email to their cell phone MMS email address. The email with the photo attached will be received as an MMS.
This will be required for another two weeks. -
I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
RaghavendarHi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support -
i am using iphone 2G, i have updated IOS 3.1.3, but i am not able to use whatsapp. the newer version of whatsapp is not working in my phone. please give me the solution.
As newer iPhones and iOS versions are made, apps start to drop support for the older versions of the iOS. It looks like you have fallen victim to this. I commend you for sticking with the original iPhone until now, but it looks like it's time for an upgrade if you want to use apps that have dropped support.
Also the new iPhone provides hundreds of new features and spec upgrades from the original. Check it out! http://www.apple.com/iphone/ -
Please send me the exit name to add my code for AUTLF check box for VA02
Hi All,
My requirement is as follows,
1) The scope of this enhancement is required only for transaction VA02 - Change Sales Order, order-type maintained in table TVARV
2) In the program, if User tries to uncheck the checkbox Complete delivery (VBAK-AUTLF), program to check if there are subsequent deliveries for stock reservation (Delivery type ZRES) are existing or not. If the deliveries are existing, an appropriate error message should be displayed and user should be restricted from performing this activity.
So please tell me where to insert my code? according to my requirement and also please send me the user exit or function module exit
Thanx in advance,
santhosh.USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal -
Hello please I want the solution I have in my iTunes I own $ 112 and you purchase from the game of war gold price of gold and 99.99 discount iTunes money did not come in the gold game of war and that I am two days ago, I did not find the solution please I want the solution quickly
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
Could you please send me the material Opps concepts Classes and Methods
Hi Experts,
I am working on Opps concepts.I am new to this concept.
Could you please send me the detailed presentation on Abap oops.
Thanks inadvance,
Regards,
Rekha.Hi this will help u.
OOPs ABAP uses Classes and Interfaces which uses Methods and events.
If you have Java skills it is advantage for you.
There are Local classes as well as Global Classes.
Local classes we can work in SE38 straight away.
But mostly it is better to use the Global classes.
Global Classes or Interfaces are to be created in SE24.
SAP already given some predefined classes and Interfaces.
This OOPS concepts very useful for writing BADI's also.
So first create a class in SE 24.
Define attributes, Methods for that class.
Define parameters for that Method.
You can define event handlers also to handle the messages.
After creation in each method write the code.
Methods are similar to ABAP PERFORM -FORM statements.
After the creation of CLass and methods come to SE38 and create the program.
In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
Example:
REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
TYPE-POOLS: icon.
TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L I N T E R N A L T A B L E S
*DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for traffic light
TYPES: traffic_light TYPE c.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
Work area for internal table
g_wa_sflight TYPE st_sflight,
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container,
o_event_receiver TYPE REF TO lcl_event_receiver.
DATA:
Work area for screen 200
g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
DATA:
Internal table
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
C L A S S E S
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA:
ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'CHANGE' TO ls_toolbar-function.
MOVE icon_change TO ls_toolbar-icon.
MOVE 'Change flight' TO ls_toolbar-quickinfo.
MOVE 'Change' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'CHANGE'.
PERFORM change_flight.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
ENDCLASS.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
l_layout TYPE disvariant,
Utillity field
l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
EXPORTING
it_index_rows = gi_index_rows.
CALL METHOD cl_gui_cfw=>flush.
REFRESH gi_index_rows.
ENDIF.
Read data and create objects
IF go_custom_container IS INITIAL.
Read data from datbase table
PERFORM get_data.
Create objects for container and ALV grid
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
gs_layout-info_fname = 'LINE_COLOR'.
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
Value of traffic light field
g_wa_sflight-traffic_light = '1'.
Value of color field:
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
ELSE.
g_wa_sflight-traffic_light = '3'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
*-- End of grid setup -
Raise event toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'EXIT200'.
LEAVE TO SCREEN 100.
WHEN'SAVE'.
PERFORM save_changes.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Form get_data
FORM get_data.
Read data from table SFLIGHT
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
ENDFORM. " load_data_into_grid
*& Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
FORM change_flight.
DATA:l_lines TYPE i.
REFRESH gi_index_rows.
CLEAR g_selected_row.
Read index of selected rows
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a line'.
EXIT.
ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
LOOP AT gi_index_rows INTO g_selected_row.
IF sy-tabix = 1.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
CLEAR g_screen200.
MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
LEAVE TO SCREEN '200'.
ENDFORM. " change_flight
*& Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
FORM save_changes.
DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
clear g_wa_sflight-line_color.
ELSE.
g_wa_sflight-traffic_light = '3'.
clear g_wa_sflight-line_color.
ENDIF.
MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
CALL METHOD go_grid->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
LEAVE TO SCREEN '100'.
ENDFORM. " save_changes
chk this blog
/people/vijaybabu.dudla/blog/2006/07/21/topofpage-in-alv-using-clguialvgrid
with regards,
Hema.
pls give points if helpful. -
keys fn fn (or other) does not activate the dictation only functions "Edit" "Start Dictation .... on MacBook Pro, Please give me the solution
ThanksWelcome to Apple Support Communities
It's possible that Dictation is set up to be turned on with a different key. Open System Preferences > Dictation & Speech, and choose the key you want to use to activate Dictation next to "Shortcut". Read > http://support.apple.com/kb/ht5449 -
Are there any Mac 10.x.x Compatible Gamepads / Joystick? Please send me the link.
Are there any Mac 10.x.x Compatible Gamepads / Joystick? Please send me the link.
Hi Dominic23,
There are many gamepads that are listed but if you check the specification it only shows that it is compatible with PS2 / PS3 / PC and no where it shows Mac. I have one example
There is a gamepad from ferrari Thrustmaster which will be listed when i put the above search string mentioned but if you check the website it shows it is compatible with PS2 / PS3 / PC.
Is there any recomended Gamepad that is fully compatible with Mac, recommended by Apple??
Maybe you are looking for
-
Can't send mail from my new ipod touch
Got a brandnew ipod touch 32gig and everything works fine except the sending of emails. I always get the error message "the connection to the outgoing server smtp.xxxx.ch failed". I have no problems to send emails from my computer with the identical
-
Please help me with the iphone 4 trouble
I'm using iphone4 and i saw a new update IOS7 and i press to update,the iphone is updating than it turn off for 5 minutes later it turn on again but with the app's logo and it start to repeat again and again and I can not connect to itunes to fix,I
-
Neep help getting online....Chinese Ethernet
Ok, I need some help from creative networkers for getting online. Where to begin? 1st: I am an American living in China, and there is a large language gap between myself and the ISP, who, incedentally, won't know what to do with my mac anyway...so ru
-
Hi, I just got done installing IOS 7 and now whenever I send an i message my email shows up on the other phone. My phone number is greyed out and doen't give me the option to click it. Please help!
-
DRM-61045 : Error found for 11.1.2.4 version
Hello Guys, Recently I have joined oracle community and got really good feedback and help from all followers. Hope we will stay connected and troubleshoot issues. Right now I'm working on DRM installation & configuration of latest version 11.1.2.4 on