ITS VERY URGENT : Could anyone help me Immediately

How to add an T.code to SAP EASY ACCESS menupath in ECC 6.0.I mean Under sap easy access-Financial accounting administrator- funds managament- funds center- i need to add t.code KS01.Please help me in detail i have never done it before.I will assign you points.Thanks in advance.

HI,
If u want to display the Std t-code at sap easy acess.
right click and tick techinacl name the t-code will be displayed.
and if u want Z t-code to be added on the Easy acess then on the top of the path floder right click.
And add t-code .
this is very easy , u can asy the basis person also.
assign points.
With reagrds
krishna

Similar Messages

Error while Costing Run --- Its very Urgent.

Hi Peers
When i ran the Standard cost for a material which is an external procured part, the system is showing an error message "Cost component split costed with value of zero" I checked the Moving Price for the material its not zero. Plz let me know what could be the problem. Its very urgent. Plz help.
Regards
Rajaram

Hello,
There can be so many reasons for this issue, system is not able to find any of the given option given in valuation variant which is linked to costing variant OKKN. Check the options given in valuation variant, it must be pick from material master planning price1 or planning price 2 or info record price or pick the existing standard price. When system fails in any of these strategies its pops up the message you described.
Maintain price in material master fields or create info record for this material
thanks
Megha

Encrypting and Decrypting Data(Its Very Urgent, Please Help.)

Hi,
Can anyone tell me some idea in the below mentioned details.
Iam creating a Function for Encrypting and Decrypting Data Values using
DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
Key Value as normal.
But the problem, is it possible to have the key value more than 8.
Its showing me error when i give the key value less than 8 or more than 8.
Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
Its Very Urgent, Please Help.
Thanks,
Murali.V

Is this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C.

How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can).

Experts plz help its very urgent

hi expert
plz help- me
previously i was getting dump in this statement
TRANSFER v_tab TO p_file.
FYI:
here v_tab is a table which hav som records
and p_file contains the path of a file like c:\new\ggg.txt
DATA: v_tab TYPE STANDARD TABLE OF t_line WITH HEADER LINE,
TYPES: BEGIN OF t_line,
       pspid(9) TYPE c,
       tab1 TYPE x,
       post1 TYPE proj-post1,
       tab2 TYPE x,
       vernr TYPE prps-vernr,
       tab3 TYPE x,
END OF t_line.
DUMP I WAS GETTIN :
For the statement
   "TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "T_LINE". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
to avoid this dump i used feild symbol
assign V_TAB to <IN> casting.
      p_file = <in>.
      unassign <IN>.
nw there is no dump
but problem is p_file contains the contents of v_tab not the file path .
plz help me its very urgent
thanx in advance

Hey, no probs,
after your initial declaration, do this.
TYPES: BEGIN OF n_line,
pspid(9) TYPE c,
tab1(15) TYPE c,        "check the length you want
post1 TYPE proj-post1,
tab2(15) TYPE c,         "check the length you want
vernr TYPE prps-vernr,
tab3(15) TYPE c,         "check the length you want
END OF t_line.
DATA: n_tab TYPE STANDARD TABLE OF n_line WITH HEADER LINE.
now after you fetch data into v_tab,
move it to n_tab.
using a loop at v_tab and move corresponding fields to n_tab's work area
append to n_tab.
once you have populated n_tab and are ready to TRANSFER.
OPEN your file using
open dataset <file> for output in text mode encoding default.
now
loop at n_tab.
TRANSFER n_tab to p_file.
endloop.
CLOSE DATASET.

SQL SELECT Query Help ..Please its very Urgent!!

Hi All,
I am having Oracle Database whice is storing 1000's of records daily.
I need to select some information based on date and time.
I am having two coloumns for Date and time. The first column(testDate) of type Date stores date as MM/DD/YY format and the second column(testTime)of type Numeric stores the time in seconds.
The Example data is :
testDate ------=-- testTime
11/12/2002 --- 35000
11/12/2002 --- 43000
11/12/2002 --- 45000
11/12/2002 --- 75000
11/13/2002 --- 2000
11/13/2002 --- 3500
11/13/2002 --- 4300
11/13/2002 --- 9800
11/13/2002 --- 23000
11/14/2002 --- 5000
11/14/2002 --- 10000
11/14/2002 --- 15000
How can i write a SELECT Query to get the records of specific date and seconds to next day specific date and seconds.I mean i want all the records between 11/12/2002 --- 43000 seconds to 11/14/2002 --- 1000 seconds.
If any one helps me in this regard iam very thank full to them.Its very urgent for me.
Thanks

Hi m7nra,
I used the query as
SELECT * FROM table
WHERE testDate + (testTime/(24*60*60)) BETWEEN TO_DATE('MM/DD/YYYY','12.11.2002') AND TO_DATE('MM/DD/YYYY','14.11.2002')
its giving DATE FORMAT NOT RECOGNIZED error.
The Example data is :
testDate ------=-- testTime
11/12/2002 --- 35000
11/12/2002 --- 43000
11/12/2002 --- 45000
11/12/2002 --- 75000
11/13/2002 --- 2000
11/13/2002 --- 3500
11/13/2002 --- 4300
11/13/2002 --- 9800
11/13/2002 --- 23000
11/14/2002 --- 5000
11/14/2002 --- 10000
11/14/2002 --- 15000
infact i need all the records between 11/12/2002 --- 43000 seconds to 11/14/2002 --- 1000 seconds.
Please help me to find a full query beacuse iam very new to Oracle.
Thanks,
S R Mannava

Please help me in creating and scheduling jobs. Its very urgent.

RDBMS: Oracle 9.2.0.4
OS: win2k
OWB Client: 9.2.0.2.8
OWB Repository: 9.2.0.2.0
Hi,
I have created a "process workflow" using OWB and deployed it successfully. Now, I would like to schedule this process. I have installed management server and tried to schedule it but all in vain. I am not able to understand anything. I have read "oracle administrator pdf" and couldnt understand anything. Please dont advise me to read any notes or pdf's because I have tried a lot and was not able to figure out the configuration.
I have a target database named "TARGET". I would like to schedule the workflow process I have created. I am not able to understand preferred credentials and how to execute the XML script generated by the "process workflow". Please help me coz its very urgent.
-Aditya

Why dont you try this? I found it after few tries,
In the create job dialog box
under General
for Override Node Preferred Credentials for entire job
username and password should be the NT or Unix
login where your Runtime database Server reside.
under Parameter
for Override preferred credentials
username and password should be of your runtime
repository user
Regards,
Shree

Plz help?????????/tell me e-book of recovery manager. its very urgent

plz help?????????/tell me e-book of recovery manager. its very urgent
its very urgent

Satyaki De was asking how to get the ¿ character. I never said it was how you managed to get it. :))
Satyaki, I have windows Vista on my laptop. It's very pretty but does little more than windows XP as far as interface goes.
;)

HT6114 My Macbook is running very slowly after installating mavericks. Could anyone help?

My Macbook is running very slowly after installating mavericks. Could anyone help?

OS X Mavericks: If your Mac runs slowly?
Spotlight indexing make computer run slowly after a fresh installation of OS X.
http://support.apple.com/kb/PH13895
Startup in Safe Mode
http://support.apple.com/kb/PH14204
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Increase disk space.
http://support.apple.com/kb/PH13806
Run EtreCheck and remove MacKeeper, CleanMyMac Norton Security, other third party aps,etc
if you have installed those applications.
https://discussions.apple.com/docs/DOC-6173

HT4967 "In the ICLOUD section of iCal" - I don't have this on my Mac iCal. How would I get it? I currently have an empty iCal on iCloud. I urgently need to back up my iCal, Could anyone help please? This is SO frustrating.

Sorry. This is where my question should be....
"In the ICLOUD section of iCal" - I don't have this on my Mac iCal. How would I get it? I currently have an empty iCal on iCloud. I urgently need to back up my iCal, Could anyone help please? This is SO frustrating.

Have you enabled iCloud syncing for calendars on your mac, which requires OS X Lion (10.7.2)? See http://www.apple.com/icloud/setup/mac.html.

I phone4 is dead, not carging, not turning on, doing absolutely nothing! have tried all the buttons etc and linked it up to my computer, no nothing...its just dead!? whats going on, could anyone help please?? its only 3 months old, poor thing.. Mel

could anyone help, just baffled, my i phone is literllly dead for no reason. i thought the battery had ran out, thou it had plenty left... i have tried to charge it and no life. also have plugged it in with my computer, again no life or aknowledgement... why? how can i fix it? Can i or is it the end of the road for my 3 month old Iphone 4???

My 3GS did the exact same thing today at about the same time. Thanks for the advice, because Apple was about to charge me $30 to tell me that!

Getting the tablespace name(its very urgent)

Hi,
Can anyone help me to get the query to find the tablespace used by the users in the database
Its Very urgent please
Thanks,
Murali.V

@Murali,
...the tablespace used by the users...What did you mean exactly ?
Default tablespace doesn't say that user cannot create a table in an other tablespace.
You can see what tablespace are used by the user's segments :
SQL> select default_tablespace
2 from user_users;
DEFAULT_TABLESPACE
PSDEFAULT
SQL> select tablespace_name, count(*)
2 from user_segments
3* group by tablespace_name
SQL> /
TABLESPACE_NAME                  COUNT(*)
AAAPP                                 102
AALARGE                                 4
ADAPP                                 429
AMAPP                                   2
[...]@Talifhani,
SELECT tablespace_name FROM dba_tablespaces; This give all tablespace from database.
Nicolas.

Could anyone help me out with this please?

Hi all,
I have always had a little problem messing with gradients, when creating images using them I tend to try and make things to perfect and then get very frustrated. This is the case again today
I have attached two images, one light and one darker. Could anyone help me out recreating these using FW please?
I am not after the letters in the center, I am just trying to create the background and the floor of the image with all its gradients and shadows.
Any help greatly appreciated

No I don't, never heard of that

I bought a second hand ipod 5 and the original owner forgot the email and password and i can't restore the ipod and it says i need the original apple ID but i dont know it could anyone help me??

i bought a second hand ipod 5 and the original owner forgot the email and password and i can't restore the ipod and it says i need the original apple ID but i dont know it could anyone help me??

If you can access the device: Tap Settings -> General -> Reset -> Erase All Content and Settings.
If you can't do that then you need to Restore it as New:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.
You can also try using DFU mode:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

I have just tried to connect my Mac book pro to an LG Plasma TV via an iWires Mini DisplayPort to HDMI cable. All I get on my TV is the Mac wallpaper and nothing else. I am missing something really silly, could anyone help please.

Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire.

ITS VERY URGENT : Could anyone help me Immediately

Similar Messages

Maybe you are looking for