ITS WebGui not starting transaction from RSBBS

Hello xperts,
i have configured a Jump via RSBBS from a Webreport to a Transaction. When it opens the WebGUI it only stays in the initial screen. My transaction does not open.
If i do the same from the Java Applicatoin Server via IView - it works?
Any ideas how to fix this via RSBBS RRI Jump?
cheers
Dominik

rz10 server port set to 8000 not 8000 and 8100

Similar Messages

  • My MBA does not start up from sleep

    My MBA 13" mid 2013 (Mavericks) does not start up from sleep at times, or at least is very slow (1-2minutes)
    As far as i remeber the only thing installed fairly resent is Virual Box.
    It does connect to my iPhone when its connected to via USB but the sceen stays black.
    Anybody else with this problem?

    Hi bryan808-
    It could be that the failure and installation of the update are simply a coincidence.
    Back up. Then try removing all PCI cards and disconnect all external devices except your monitor, keyboard, and mouse. If that configuration will wake from sleep then start adding devices and/or cards one at a time until you find the culprit that keeps your machine from waking.
    If you are really running a G4 you will have better luck posting in the appropriate section of that forum: Ctegory: Power Mac G4
    Luck-
    -DaddyPaycheck

  • Vendor list - not get transaction from last three years

    Dear Sir,
    Can we have a list of vendor which are not get transaction from last three years ?
    Vijay Vadgaonkar
    SAP MM

    either you write a z-report
    or you download all vendor numbers from LFA1 table
    then run MC$4  transaction for analyzing period of last 3 year.
    download the vendor numbers from this report as well.
    Finally compare the both download (easiest with VLOOKUP formula) to find the delta, which are the inactive vendors.
    However, these are the inactive vendors from purchasing point of view only.
    vendors like restaurants and customs and tax authorities may only have financial postings and never purchasing activities.

  • Error HRWPC_FC_EXEC - could not start transaction

    Hi, am getting error when access MSS ePortal a particular transaction give me the error HRWPC_FC_EXEC - could not start transaction, and other transactions are working fine. Any one pls advise how to check and we miss anything? 
    thanks in advance.
    Regds

    Hello,
    Please set parameter  ~webgui_theme with value "sl" in the HRWPC_FC_EXEC service under GUI configuration. That you will find in the interactive options of service data.  After saving this service please also run the transaction SITSPMON -> Templates and Mimes -> go to "Invalidate cache" and select System wide/Application server.
    Hope it helps,
    Christine

  • I updated LR5 to 5.7, its still not importing files from my D750. Any help would be appreciated.

    I updated LR5 to 5.7, its still not importing files from my D750. Any help would be appreciated.

    Did you try unchecking Sync Photos on the Photos tab of your sync settings and syncing?  If this doesn't remove them, try creating an empty folder on your PC, then selecting to sync this folder on the Photos tab and syncing your phone.  This should delete the existing photos prior to syncing the empty folder.
    Also, you can transfer these photos to your computer if you need to by using an app like PhotoSync.

  • ThinkCentre m58 did not start booting from usb!!

    heloo ..
    i have ThinkCentre m58 , i tray to format it by usb bootable windows but the pc did not start booting from usb!!
    my usb have windows insid it.

    Thanks for your effort!!
    I deleted solaris and I'll continue to use Debian

  • IMac G4 will not start up from OS disk to upgrade

    I am trying to upgrade the OS in a G4 iMac, the OS disk is recognized, am asked to restart, but it will not restart from the OS 10.5 disk.

    Will it boot from the install disc that came with the G4?  If so, run
    Disk Utility
       1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
       3. Click the First Aid tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Click Repair. Disk Utility checks and repairs the disk.
    After that, reset the PRAM  and see if that helps.
    Please post back with results,

  • IPod touch music does not start songs from the beginning

    the songs on an ipod touch does not start from the beginning how do you fix this

    In your iTunes Library, check the songs to see if they are set to Remember playback position. If they are, turn that off and Sync the iPod with iTunes for these new changes to take effect.
    Highlight a song, right-click/Get Info/Options>Remember playback position:

  • Material Codes - not get transaction from last 5 years

    Hi
    Can we have a list of Material codes which are not in use/transacted from last 5 years?  I mean, want to find out all dormant Material codes.
    How can we find one time used Material codes?
    Thanks
    Ajit

    it depends:
    1. if your company's data was not archived within 5 years.
    2. there are already archived data of MM.
    normally i will use MB51 and get the the list of all material movements within 5 years.
    then you can know what materials have movements within 5 years. (sorting and subtotal in excel)
    then compare with full material list to get the result, with vlookup in excel.
    by the way, MC46,MC50 can also work from certain degrees.
    Edited by: JiQing Zhao on Apr 14, 2011 2:08 PM

  • How do you NOT start up from the install disk if it is in the CD drive?

    This has to be a dumb question, but . . . I put my 10.4 install disk into the CD drive of the Mini to try an experiment, installing OS X on a thumb drive as a backup.  It didn't work. Now the Mini will only start up from the install disk, not the internal drive (which has 10.5.8 on it). 
    The advice I have seen in the forum says to hold down the D key upon startup and that will choose the internal drive as the startup disk. That didn't work. Also, there was a suggestion to hold down the option key upon startup, and then choose the internal drive from the startup manager. No luck there, either.  I also tried holding down the eject button on the keyboard during startup, but it still started up from the install disk. 
    I feel like I am in a 1 Infinite Loop here.  Any advice much appreciated.
    Jim

    Oops, I will now answer my own dumb question.  I found another suggestion in the Powerbook forum that said to hold down the mouse button as it boots up, and the disk should eject -- it worked!  I hope this will help somebody else.  Sorry about the previous post.

  • IBook G3 will not start-up from 10.4.6 Install disc

    I have a 700 MHZ iBook G3 with 640 MB RAM and it runs without problems on 10.3.9
    I would like to upgrade the system software to Tiger, but any attempt to start-up from the 10.4.6 install discs that came with my Intel MacBook result in the grey screen with the power icon that reads in multiple languages "You need to restart your computer. Hold down the Power button for several seconds or press the Restart button."
    Additionally, that message is partially obscured by 24 other lines of code, starting with "panic(cpu 0 caller 0x002E0BF4): Unable to find driver for this platform: "Powerbook4, 3"." and ending with "panic: We are hanging here. . ."
    Am I doing something wrong? Are there other methods of achieving this?
    If the 10.4.6 install discs that came with my MacBook are unusable to update the iBook OS, what are the other options to upgrade it to a version of Tiger?
    thank you!
    -sam
    null

    On ebay, there seem to be mainly single DVD full-install 10.4 versions which indicate "Includes Xcode 2" on the DVD.
    there was only one 4-disc set I found and it states:
    "By default, Apple only sold Mac OS X 10.4 Tiger on DVD. When Tiger first launched, Apple offered the opportunity to trade the DVD in the retail box for a CD set using a media exchange program. Most Mac OS X Tiger installer discs sold on eBay are model-specific, that is, they shipped in the box with a specific Mac. This is the full retail set that could only be obtained through the Apple media exchange program that no longer exists. It is difficult if not impossible to get this CD set from Apple today."
    Is this the specific version I need to properly install Tiger on my G3 iBook or will one of the single DVD full-installs be sufficient? (this box set is alot more expensive than the single DVDs)
    thanks again for the help!
    -sam

  • Can not start workflow from Servr OM code

    Hello all ,
    i want to start sharepoint 2013 workflow when a list item is updated based on some condition.
    i have writen bellow code
    var workflowServiceManager = new WorkflowServicesManager(web);
                    var workflowSubscriptionService = workflowServiceManager.GetWorkflowSubscriptionService();
                    //get all workflows associated with the list
                    //get lsit
                    SPList list = web.Lists["Leave"];
                    if (list != null)
                        var subscriptions = workflowSubscriptionService.EnumerateSubscriptionsByList(list.ID);
                        //run all workflows associated with the list
                        SPListItem item = list.GetItemById(Convert.ToInt32(drpRequest.SelectedValue));
                        foreach (var workflowSubscription in subscriptions)
                            //initiation parameters 
                            var inputParameters = new Dictionary<string, object>();
                            //inputParameters.Add("List", leaveList.ID);
                            workflowServiceManager.GetWorkflowInstanceService().StartWorkflowOnListItem(workflowSubscription, item.ID, inputParameters);
    on the last line it throws unauthorised access exception .
    while current user have owner permissions.
    here is error .
    i have run full profile sync and user is availiable in UPS.
    Please Help
    Mukesh

    Hello  all,
    After running full profile sync i am able to deploy workflow.
    it is running
    but how can i elevate privilege to start workflow.
    from code
    Mukesh

  • Macbook does not start up from any Windows Installation Disc

    Hi:
    I just bought one brand new MacBook Pro in March and I decided to install Windows two days ago. I created a 32 GB partition using Boot Camp (I had no problem at this point). However, when I restarted the computer (after I inserted an original Windows XP SP2 disc) it got freezed, and a black screen with a blinking cursor on the upper-left corner appeared. I repeated the operation many times with my XP SP2 and another Vista SP1 CDs, always with the same result. After that, I tried to install both systems on 2007 iMac and I had no trouble.
    Could you help me with this?
    Thank you!!
    Ramiro

    Hey guys,
    I just recently ran into the same problem while trying to install Windows XP SP2 on my MBP. I tried a number of suggested solutions including:
    1. Re-partitioning the HDD
    2. Repairing the partitions using Disk Utility (requires OS X DVD boot for primary partition)
    3. Copying my Windows to a new CD
    4. Hitting the Option key during boot and selecting the Windows CD
    None of the above worked. Here is how I finally got my Mac to boot from the Windows CD (this might not work for most or any of you - some of these problems are very case specific):
    1. Start the Windows installation from the Boot Camp Assistant in OS X
    2. When the computer restarts hold the Option key until you get the boot menu
    3. You should see the original OS X option as well as the Windows CD
    4. At this point pop out the Windows CD by hitting the eject key
    5. Once the CD is out its icon disappears in the boot menu
    6. Reinsert the CD and wait for it to spin up
    7. Once the Windows CD icon re-appears as a choice select it and hit enter
    However random this sequence of events might seem it actually worked for me. I hope it does for you too. Good luck!
    Yuri

  • NW2004s XI Can not start Transaction: Integration Builder

    NW2004s ABAP + Java
    In both 000 and 001 client, on trying to launch "Integration Builder" using transaction "sxmb_ifr". The message says "Starting browser..." and opens the local sap folder on my PC. It does not launch the Web Browser (Internet Explorer) as it should.
    Anybody else facing the same problem ?

    Do you have the values in the exchange profile setup correctly...
    This should have been part of the post installation activities to be done...
    Check the exchange profile parameters in url
    http://<webas>:5<sysnr>00/exchangeProfile
    verify the entries under "Connections"
    Thanks,
    Renjith

  • SRM Error : Could not start transaction.

    The user want to approve the SC and is getting the error
    "Cannot Start the Transaction"
    "Return data for Work Item could not be read"
    Please let me know how to fix this issue.

    Hi,
    Are there any dumps? What version of SRM are you using?
    Regards,
    Prasanna

Maybe you are looking for