ITSmobile standalone - F8 logoff doesn't work

Hi,
in our ITSmobile standalone scenario the logoff doesn't work.
It is also not working in the ITS webgui transactions using the standard logoff button.
It is a ITS 6.20 standalone SP64, with a 4.70 SP65.
Many things regarding logoff only work for integrated ITS but not for our standalone...
Hope someone can help.
Aksel

Hello Aksel,
There is no session management in the ITS Mobile for the Standalone ITS so the
~DISCONNECTONCLOSE and ~SINGLETRANSACTION will not have any effect here.
The best thing to do is to set the ~timeout value lower. If you
currently have it set to 30 than it is 30 minutes.
If you think a user should complete this ITS Mobile service
in 5 minutes than please set the ~timeout for this service to 5 for
5 minutes. This will remove the user's session in SM04 after 5 minutes
of no activity.
Regards,
Oisin

Similar Messages

Using dataTemplate on standalone XML Publisher doesn't work?

Hi guys, I'm using standalone XML Publisher. I created a report based on the next Data Template:
<dataTemplate name="BasicQueryDT" description="Simple query data template" dataSourceRef="rec_hum">
     <dataQuery>
          <sqlStatement name="basicQuery">
               <![CDATA[
         select to_char(sysdate, 'dd/mm/yyyy') today
         from   dual
      ]]>
          </sqlStatement>
     </dataQuery>
     <dataStructure>
          <group name="G_Main" source="basicQuery">
               <element name="TheDate" value="today"/>
          </group>
     </dataStructure>
</dataTemplate>Then I defined a RTF template to display the results, I used the Word Template Builder for this. The template is very simple and it is just a one column table with these place holders:
<?for-each:G_Main?> <?TheDate?><?end for-each?>But when I run the report it shows nothing, just the header of the table. I know the query is executed because if I place a syntax error into the query I can see the java.sql.Exception on the XMLPSERVER console (I'm running it local by now).
Can someone help me and point out what I'm doing wrong here?
I'd really appreciate it.
Thank you all.
Mensaje editado por:
Fer Domin

Just run the XML first without a template, you get:
<BasicQueryDT>
     <LIST_G_MAIN>
     <G_MAIN>
<THEDATE>12/06/2006</THEDATE>
</G_MAIN>
</LIST_G_MAIN>
</BasicQueryDT>
Per default we always the generate Upper Case field names. So <?THEDATE?> should work in the template.
Thanks,
Klaus

Transport to Consolidation system doesn't work

First of all, sorry if this is a silly question but I have to admin I am a little missed with NWDI. Every step we did we have a new error
In this case, we have trying to move a iView using NWDI and process to transport from
Development Environment to Consolidation doesn't work.
We have done all steps to deploy changes in Development and iview
has been updated correctly. But then, when we release the DC in NWDS
and go to Transport View - Consolidation tab and we do the import
althougth we have a successfully message with "Import Finished", the
iview has not been updated in Consolidation system .
We have doublechecked server, port and SDM password in Runtine System
tab for this server and everything is OK.
I have analyzed all logs generated during Import process in Transport
Studio and no error is showed.
I have find in CBS Consolidation builspace and we don't have any activities pending, and additionally the DC doesn't appear in this buildspace. However in Development buildspace it is.
Could somebody help us putting some ligth on it? Where can I to try to obtain log information about why this change is not moved to Consolidation?
Thanks in advance.

Hi Javier,
I have sometimes a similar problem: we are developing WebDynpro applications. The activities are checked in and transported correctly, but on the destination system only the old release shows up.
My solution of this situation is not elegant, but effective (steamroller tactics or in german "Holzhammermethode"):
- Log on to the console of the machine where your destination system for your deployment is running. Start up the (really slow) standalone SDM application and select the components, which are not updated correctly, for undeployment and undeploy them manually.
- After successful undeployment reimport the component/activity in the JDI transport studio again.
As mentioned before, not elegant, but effective. It worked for all the situations now, when the deployment did not work, but there was no obvious reason available.
Regards
Karsten

Custom Windows 8.1 .WIM doesn't work via WDS, works OK manually

Hello,
I have a very peculiar situation; I've created a custom Windows 8.1 Enterprise x64 image, but when I deploy it using Windows Deployment Services on Windows Server 2012 R2, using the Windows 8.1 Enterprise x86 boot.wim as the Windows Deployment
Services boot image, it deploys successfully, but malfunctions;
it doesn't activate [against our KMS server]
when a new user logs on, the process stalls; if you logoff then logon, Microsoft Office gives you a 1603 error.
File Explorer [I think] doesn't work (apologies for vagueness; I absolutely
wasn't expecting this and was somewhat floored by the symptoms)
HOWEVER, if I manually deploy the SAME .WIM image, copy in the
SAME unattend.xml, and manually replace %MACHINEDOMAIN% and %MACHINENAME% with the right values, it works fine.
HOWEVER, I've already verified that Windows Deployment Services is working perfectly well because I've added the Windows 8.1 Enterprise x64 install.wim as an install image, and used the unattend.xml to automate it. In other words, with the
install.wim from the .ISO, everything is working fine, but with a custom image, it malfunctions.
I don't know why it's malfunctioning; nothing looking like a root cause appears in any event logs. I have injected some drivers into my custom image, but these are for relatively obscure devices such as scanners and smart card readers, which
aren't even on the computer I'm testing this on. The test computer would benefit from
chipset, video and network drivers, but the inbox ones work OK. In any event, they work fine when I manually deploy.
Have more-or-less replicated this on test machines that are virtual, desktop and laptop, so I have no reason to believe the target device is a factor.
For now, Windows Deployment Services doesn't have a client unattend file.
This is a very peculiar problem. My existing, production environment has
Windows 7 Enterprise in a custom image
Windows Server 2008 R2
Windows Deployment Services
working perfectly, and was looking to maintain the same approach, but simply update it.
Would welcome your ideas.
Kind regards,
Anwar

Hi,
For this issue,I think it is related to the custom image.
I suggest we don't add any drivers to the custom image to test it.
Meanwhile,I suggest you upload following logs here for further research. SkyDrive or similar network sharing would be better to use to share your files.
C:\WINDOWS\PANTHER\setupact.log
C:\WINDOWS\PANTHER\setuperr.log
Regards,
Kelvin hsu
TechNet Community Support

How do I restore column headings in Response table after accidently deleting them? Undo doesn't work.

How do I restore column headings in Response table after accidently deleting them? Undo doesn't work (only seems to go back one level). I also have so many headings I won't be able to type them in manually!

With the help of information from user, ptressel, in [https://support.mozilla.org/en-US/questions/1032154#answer-673322 a post here about the existence of sessionstore.js when version 33 was released], I was able to easily recover my tabs and tab groups as follows:
# close Firefox and, perhaps, allow a few seconds (30s?) for any final closing of files;
# check to see if you have a sessionstore.js file in your profile folder, named like the one I documented in my original post above;
# if it is not timestamped prior to the discovery of your problem, open the sessionstore-backups folder;
# check if the recovery.js file is suitably timestamped and, if not, the recovery.bak.
# At this point, you are likely to find that none of them are prior to your problem occuring. If so, open your backups of this folder and go through steps 2-4 to find a file prior to your problem occuring.
# When you find a file, copy it to the root of your current profile folder and name it, "sessionstore.js"
# Open Firefox. Mine opened up as desired.
This is a Windows solution. Sorry I can't comment on other platforms, but I'd bet that as this is just a file copy and renaming, it is likely the same.
For Windows users, you may find you need to sign out and login as an administrator in order to access the backups. You need not logoff your standard account, but do have Firefox closed as described above.
Hope that helps.

Abap multi-mapping doesn't work

Hi,
We have a 7.1 PI system and we are trying to set up a multi-mapping. This should process one IDOC into multiple XML-files.
If we do this with a message mapping everything works fine. If we do this with an abap mapping it doesn't work. We receive the following error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">MISSING_INTERFACE</SAP:Code>
<SAP:P1>2</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No interface specified for parameter 2</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I can make it work by changing a value in debugging. In class CL_MERGE_SPLIT_SERVICE, method ENTER_SPLIT_SERVICE, there is a read on table split_data:
          set interface
            READ TABLE split_data
              WITH KEY
                param_type = c_param_type_inbound
                param_numb = <payload_line>-numb
              ASSIGNING
                <split_line>.
Now if I change the <payload_line>-numb to 1 each time the table is read, everything works fine.
What am I doing wrong here? Or is this a bug?
Thanks,
Wim
Edited by: Wim Van Linden on May 19, 2009 12:32 PM

Hi,
What ws you mistake ? caus I have the same error, here is my XML generated :
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages
     xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
     <ns0:Message1>
          <SOAP:Envelope
               xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
               <SOAP:Header>
                    <OPER_REF>SAPPI</OPER_REF>
               </SOAP:Header>
               <SOAP:Body>
                    <ns2:createSapProductRequest
                         xmlns:ns2="http://xxxxxx.com/PI/ZIN243/SendMaterialList">
                         <country>FR</country>
                         <division>1300</division>
                         <productStage>
                         </productStage>
                         <productCode>000000000001207062</productCode>
                         <typeCode>VERP</typeCode>
                         <productLab>PALETTE INTERCO</productLab>
                         <productHierarchy>
                         </productHierarchy>
                         <productCreateDt>2009-06-19</productCreateDt>
                    </ns2:createSapProductRequest>
               </SOAP:Body>
          </SOAP:Envelope>
     </ns0:Message1>
     <ns0:Message2>
          <SOAP:Envelope
               xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
               <SOAP:Header>
                    <OPER_REF>SAPPI</OPER_REF>
               </SOAP:Header>
               <SOAP:Body>
                    <ns2:createSapProductRequest
                         xmlns:ns2="http://xxxxxxx.com/PI/ZIN243/SendMaterialList">
                         <country>FR</country>
                         <division>1500</division>
                         <productStage>
                         </productStage>
                         <productCode>000000000001207062</productCode>
                         <typeCode>VERP</typeCode>
                         <productLab>PALETTE INTERCO</productLab>
                         <productHierarchy>
                         </productHierarchy>
                         <productCreateDt>2009-06-19</productCreateDt>
                    </ns2:createSapProductRequest>
               </SOAP:Body>
          </SOAP:Envelope>
     </ns0:Message2>
</ns0:Messages>

Masthead header logoff link not working

Hi,
We created a theme for our masthead and assign it to our portal. However, when the logoff button is click it freeze and does not redirect the page back to the login page. Has anyone encountered this problem?
Regards,
Jin Bae

Hi Yoav,
can we use this URL with the UME property ume.logoff.redirect.url? Is the syntax of the following value correct? Do I miss something else to tell the system it is a URL in this case? Somehow it doesn`t work as given in the SAP note 696294 and the system always adds "\" infront of ":" after being saved, why?
ume.logoff.redirect.url=https\://its-services.de.kworld.kpmg.com/myhomepage.htm
Will you please give me a clue? Your help will be highly appreciated as my company needs this solution badly.
Thanks a lot in advance for your help.
Best regards
Tho

Deployment on OC4J 11g doesn't work

Jdeveloper 11g ADF runtime installer for standalone OCJ4 11 doesn't find the following file: - Input File doesn't exist "adfcm.jar".
Then, when i deploy an application (ear or war) on standalone OC4J, i have the following error:
2007-06-26 11:54:14.328 NOTIFICATION Exception : NoClassDefFoundError:
Classe manquante : oracle.adf.share.logging.handler.InternalADFHandler
Classe dÚpendante : oracle.adf.share.logging.internal.perf.ADFPerfSensor
Chargeur : adf.oracle.domain:11.1.1
Source de code : /E:/oc4j/BC4J/lib/adf-share-base.jar
Configuration : <code-source> (ignore manifest Class-Path) in /E:/oc4j/j2ee/home/config/se
rver.xml
La classe manquante est disponible Ó partir des emplacements suivants :
1. Source de code : /E:/oc4j/j2ee/home/lib/adflogginghandler.jar (from <code-source> (ignore
manifest Class-Path) in META-INF/boot.xml in E:\oc4j\j2ee\home\oc4j.jar)
Cette source de code est disponible dans le chargeur oracle.mds:11.0.
2007-06-26 11:54:14.359 NOTIFICATION L'opÚration Application Deployer sur GregWar a ÚchouÚ.
2007-06-26 11:54:14.375 NOTIFICATION L'opÚration Application UnDeployer sur GregWar est dÚmarrÚe.
2007-06-26 11:54:14.375 NOTIFICATION Suppression de toutes les liaisons de l'application GregWar dan
s tous les sites Web
2007-06-26 11:54:14.796 NOTIFICATION L'opÚration Application UnDeployer sur GregWar est terminÚe.
07/06/26 11:54:14 ATTENTION: DeployerRunnable.run NoClassDefFoundErrororacle.oc4j.admin.internal.Dep
loyerException: NoClassDefFoundError
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:140)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnabl
e.java:52)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:82)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.classloader.util.AnnotatedNoClassDefFoundError:
Classe manquante : oracle.adf.share.logging.handler.InternalADFHandler
Classe dÚpendante : oracle.adf.share.logging.internal.perf.ADFPerfSensor
Chargeur : adf.oracle.domain:11.1.1
Source de code : /E:/oc4j/BC4J/lib/adf-share-base.jar
Configuration : <code-source> (ignore manifest Class-Path) in /E:/oc4j/j2ee/home/config/se
rver.xml
La classe manquante est disponible Ó partir des emplacements suivants :
1. Source de code : /E:/oc4j/j2ee/home/lib/adflogginghandler.jar (from <code-source> (ignore
manifest Class-Path) in META-INF/boot.xml in E:\oc4j\j2ee\home\oc4j.jar)
Cette source de code est disponible dans le chargeur oracle.mds:11.0.
at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2059)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1623)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1579)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1564)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at oracle.adf.share.logging.internal.perf.ADFPerfSensor.<clinit>(ADFPerfSensor.java:92)
at oracle.adf.model.servlet.ADFBindingFilter.<clinit>(ADFBindingFilter.java:55)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at com.evermind.server.http.deployment.WARAnnotationParser.getFilterClasses(WARAnnotationPar
ser.java:189)
at com.evermind.server.http.deployment.WARAnnotationParser.parseAnnotations(WARAnnotationPar
ser.java:103)
at com.evermind.server.http.HttpApplication.parseMetaData(HttpApplication.java:8929)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1210)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:833)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.ja
va:433)
at com.evermind.server.Application.getHttpApplication(Application.java:693)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFr
omReference(HttpSite.java:2039)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:19
58)
at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1652)
at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:235)
at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:96)
at oracle.oc4j.admin.internal.ApplicationDeployer.bindWebApp(ApplicationDeployer.java:554)
at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:205)
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:98)
... 5 more

Hi,
thanks for reporting the issue, but OC4J 11 already has the ADF libraries in it
Frank

Deployment for OC4J 11g doesn't work

Jdeveloper 11g ADF runtime installer for standalone OCJ4 11 doesn't find the following file: - Input File doesn't exist "adfcm.jar".
So, when i deploy an application (ear or war) on standalone OC4J, i have the following error:
2007-06-26 11:54:14.328 NOTIFICATION Exception : NoClassDefFoundError:
Classe manquante : oracle.adf.share.logging.handler.InternalADFHandler
Classe dÚpendante : oracle.adf.share.logging.internal.perf.ADFPerfSensor
Chargeur : adf.oracle.domain:11.1.1
Source de code : /E:/oc4j/BC4J/lib/adf-share-base.jar
Configuration : <code-source> (ignore manifest Class-Path) in /E:/oc4j/j2ee/home/config/se
rver.xml
La classe manquante est disponible Ó partir des emplacements suivants :
1. Source de code : /E:/oc4j/j2ee/home/lib/adflogginghandler.jar (from <code-source> (ignore
manifest Class-Path) in META-INF/boot.xml in E:\oc4j\j2ee\home\oc4j.jar)
Cette source de code est disponible dans le chargeur oracle.mds:11.0.
2007-06-26 11:54:14.359 NOTIFICATION L'opÚration Application Deployer sur GregWar a ÚchouÚ.
2007-06-26 11:54:14.375 NOTIFICATION L'opÚration Application UnDeployer sur GregWar est dÚmarrÚe.
2007-06-26 11:54:14.375 NOTIFICATION Suppression de toutes les liaisons de l'application GregWar dan
s tous les sites Web
2007-06-26 11:54:14.796 NOTIFICATION L'opÚration Application UnDeployer sur GregWar est terminÚe.
07/06/26 11:54:14 ATTENTION: DeployerRunnable.run NoClassDefFoundErrororacle.oc4j.admin.internal.Dep
loyerException: NoClassDefFoundError
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:140)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnabl
e.java:52)
at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:82)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.classloader.util.AnnotatedNoClassDefFoundError:
Classe manquante : oracle.adf.share.logging.handler.InternalADFHandler
Classe dÚpendante : oracle.adf.share.logging.internal.perf.ADFPerfSensor
Chargeur : adf.oracle.domain:11.1.1
Source de code : /E:/oc4j/BC4J/lib/adf-share-base.jar
Configuration : <code-source> (ignore manifest Class-Path) in /E:/oc4j/j2ee/home/config/se
rver.xml
La classe manquante est disponible Ó partir des emplacements suivants :
1. Source de code : /E:/oc4j/j2ee/home/lib/adflogginghandler.jar (from <code-source> (ignore
manifest Class-Path) in META-INF/boot.xml in E:\oc4j\j2ee\home\oc4j.jar)
Cette source de code est disponible dans le chargeur oracle.mds:11.0.
at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2059)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1623)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1579)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1564)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at oracle.adf.share.logging.internal.perf.ADFPerfSensor.<clinit>(ADFPerfSensor.java:92)
at oracle.adf.model.servlet.ADFBindingFilter.<clinit>(ADFBindingFilter.java:55)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at com.evermind.server.http.deployment.WARAnnotationParser.getFilterClasses(WARAnnotationPar
ser.java:189)
at com.evermind.server.http.deployment.WARAnnotationParser.parseAnnotations(WARAnnotationPar
ser.java:103)
at com.evermind.server.http.HttpApplication.parseMetaData(HttpApplication.java:8929)
at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1210)
at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:833)
at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.ja
va:433)
at com.evermind.server.Application.getHttpApplication(Application.java:693)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFr
omReference(HttpSite.java:2039)
at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:19
58)
at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1652)
at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:235)
at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:96)
at oracle.oc4j.admin.internal.ApplicationDeployer.bindWebApp(ApplicationDeployer.java:554)
at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:205)
at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:98)
... 5 more

User,
There is a specific forum for JDev 11: JDeveloper and OC4J 11g Technology Preview
However, the specific issue you mention is documented in the release notes addendum for 11: http://www.oracle.com/technology/products/jdev/htdocs/11tp/11gtechpreviewaddendum.html#dep2
John

ORACLE_HOME doesn't work for sqlplus

When I define the system environment variable ORACLE_HOME within the system properties, the sqlplus doesn't work in the command line. I got an error as follows:
Error 6 initializing SQL*Plus
message file sp1<land>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory.
If I remove the ORACLE_HOME variable, the sqlplus works. However, I have to set the ORACLE_HOME variable for my standalone OC4J. The value of ORACLE_HOME is c:\oc4j.
How can I resolve this problem?
Thanks.

Error 6 initializing SQL*Plus
message file sp1<land>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your
Oracle software directory.
You have set wrong oracle_home , that's why you getting this error.
when you run sqlplus, it search message file on in oracle home , if oracle home set wrong , it will not find message file.
If I remove the ORACLE_HOME variable, the sqlplus
works. However, I have to set the ORACLE_HOMEOn command prompt run command "set" , it will tell what oracle home set in environment
variable for my standalone OC4J. The value of
ORACLE_HOME is c:\oc4j.
c:\oc4j ???!!!!
it should be some thing like C:\oraclexe\app\oracle\product\10.2.0\server
Virag

The administrator doesn't work for my computer

I've never changed any information on my computer, but for whatever reason, my administrator password doesn't work - therefore, I cannot update anything! I've changed the password using the install disc, but it still didn't work. I have no idea what to do, and I want to avoid having to erase my harddrive and start over again. Any suggestions?

You could enable the root account then create a new administrator account.
See:
http://www.spy-hill.com/~myers/help/apple/EnableRoot.html
http://docs.info.apple.com/article.html?artnum=106290
Once you have enable the root account. Logoff your account.
Click on the blue apple icon > log out
This will bring up the logon screen. Enter root & your root password.
If you have trouble enabling the root account, you will have to use the sudo method in the first article. You will have to boot in single user mode. Hold down the command-s key when you poweron your machine. Follow the instructions that come up in single user mode to enable write access to the harddrive. Then, follow the instruction for enable root from the command line in the first article ( the third set of instructions ). You may not have to put sudo before the commands.
I have not tried this. It is what I got from reading the above pages.
Most people would advise disabling the root account once you are done with it.
Robert

NAC OOB logoff feature not working

Hi all,
I've deployed NAC in L2 OOB VG mode with ADSSO and I'm trying to use the OOB logoff feature but it's not working. The VLAN change detect feature doesn't work either (I think the two problems might be related).
It will work if each user role is assigned a different auth/access VLAN pair but in my setup, everyone has a common auth vlan and separate role-based access vlans. Because of this, I have to use the IP refresh feature as well (this works fine).
I'm running Windows Vista and version 4.8.0 of the NAC software with version 4.8.1.5 of the agent
I checked the release notes and found that caveat CSCth60233 identifies this bug with the VLAN change detect with the workaround being to refresh the IP address automatically after being logged out. Does anyone know of a workaround for this problem to do this automatically? Is a solution for this problem in the works?
Also would anyone be able to help me with my OOB logoff feature not working? I've configured everything according to the documentation.
I appreciate your responses
~Xavier

Here are my configs if necessary. Tell me if anything else is needed.
User Management > User Roles
List of Roles
Edit Role
Traffic Control
Bandwidth
Schedule
Disable this role
Role Name
Role Description
Role Type
Normal Login Role Quarantine Role
*Max Sessions per User Account             ( Case-Insensitive Session Identifiers             )
(1 – 255; 0 for unlimited)
Retag Trusted-side Egress Traffic with VLAN (In-Band)
(0 – 4095, or leave it blank)(*This option has been deprecated, and it will be removed in upcoming releases)
*Out-of-Band User Role VLAN
VLAN ID VLAN Name                 (if left blank, it will default to the default access vlan             settings in the Port Profile)
*Bounce Switch Port After Login (OOB)
Enable               Disable               (This option is effective only when port profile is set to use it)
*Refresh IP After Login (OOB)
Enable               Disable               (This option only applies to L2 OOB Virtual Gateway with Role VLAN             as Access VLAN and switch port is NOT bounced after VLAN change)
*After Successful Login Redirect to
previously requested URL
this URL:
(e.g. http://www.cisco.com/)
Redirect Blocked Requests to
default access blocked page
this URL or HTML message:
*Show Logged-on Users
User info
Logout button
Enable Passive Re-assessment                          (To enable Passive Re-assessment for OOB Agent             connections, you must also enable the OOB Logoff option at             Device Management > Clean Access > General Setup > Agent Login.)
Re-assessment Interval
(Minimum of 60 minutes and maximum of 1440 minutes [24 hours])
Grace Timer
(Minimum of 5 minutes and maximum of 30 minutes)
Default action on failure
Continue Allow user to remediate Logoff user immediately
(*only applies to normal login role)
Device Management > Clean Access
Certified Devices
General Setup
Network Scanner
Clean Access Agent
Updates
            Web Login   · Agent Login
User Role
Unauthenticated Role(not common) role_engineer role_developer role_admin role_sales role_guest
Operating System
ALL WINDOWS_ALL WINDOWS_XP WINDOWS_VISTA_ALL WINDOWS_7_ALL MAC_ALL MAC_OSX LINUX FREEBSD SOLARIS_ALL SOLARIS_86 SOLARIS_SPARC UNIX VMS OS2 PALM
(By default, 'ALL' settings apply to all client operating systems if no OS-specific settings are specified.)
Enable OOB logoff for Windows NAC Agent and Mac OS X Agent        (This global option applies to all OOB CASs and user roles and enables Agent logout and heartbeat timers for OOB Agent connections. You must also enable this option for Passive Re-assessment to function with OOB Agent connections.)
Require use of Agent
(for Windows & Macintosh OSX only)
Agent Download Page Message (or URL):
           Network Security Notice: This network is protected by a Cisco NAC Appliance Agent, a component of the Cisco NAC Appliance Suite. The Agent ensures that your computer meets the requirements for accessing this network, and helps you keep your computer secure and up-to-date.
Please use the Agent to log in to the network.
If you don't have the Agent software yet, download it by clicking the button below. After downloading the installation file, run it to complete the installation.
If you have already downloaded and installed the Agent, please close this window and right-click the Agent icon in the system tray and choose Login from the menu. Enter your usual network user name and password in the login window.
Require use of Cisco NAC Web Agent (for Windows only)
          Cisco NAC Web Agent Launch Page Message (or URL):
Network Security Notice: This network is protected by the Cisco NAC Web Agent, a component of the Cisco NAC Appliance Suite. The Cisco NAC Web Agent ensures that your computer meets the requirements for accessing this network, and helps you keep your computer secure and up-to-date.
Please launch Cisco NAC Web Agent by clicking the button below.
Allow restricted network access in case user cannot use   NAC Agent or Cisco NAC Web Agent
          Restricted Access User Role:
role_engineer role_developer role_admin role_sales role_guest
          Restricted Access Button Text:
Restricted Network Access Message:
           Restricted Network Access: If you cannot use a Cisco NAC Appliance Agent, you can obtain restricted network access temporarily by clicking the button below.
Show Network Policy to NAC Agent and Cisco NAC Web Agent users (for Windows only)
          Network Policy Link:
Logoff NAC Agent users from network on their machine logoff or shutdown after
    secs (for Windows & In-Band setup, for OOB setup when OOB Logoff is enabled)
     (Setting the time to zero secs will logout user immediately. Valid range: 0 - 300 secs.)
Refresh Windows domain group policy after login
(for Windows only)
Automatically close login success screen after
    secs
     (Setting the time to zero secs will not display the login success screen. Valid range: 0 - 300 secs.)
Automatically close logout success screen after
    secs
(for Windows only)
     (Setting the time to zero secs will not display the logout success screen. Valid range: 0 - 300 secs.)

"itunes has detected a problem with your audio configuration" Now Itunes doesn't work on my windows 7 machine. What to do?

I have a Windows 7 system. ITunes used to work fine. Recently I am getting a message:
"ITunes has detected a problem with your audio configuation. Audio/Video playback may not operate properly."
I have reloaded and repaired ITunes. I have uninstalled and reinstalled Quicktime. Nothing works.
Itunes doesn't work any more on my machine. Anybody?

Hey there bogusss,
I would recommend the troubleshooting steps from this article named:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/ts1371
If this issue occurs with iTunes 7.0.2 - 7.6, customers may instead see this error message:
"iTunes cannot run because it has detected a problem with your audio configuration"
If this occurs with iTunes 7.0 or 7.0.1, customers may instead see a -200 error when opening iTunes 7.
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Since installing CS6, Acrobat Pro X fails I had to reinstall it a few times, now doesn't work

Since installing CS6, Acrobat Pro X failed a few times. I had to reinstall it a few times, now doesn't work at all even after installing again.

Hi there
Thank you for your reply.
When I click on the link for the cleaner however, before I can download the
file, it gives me this message:
"Important - This tool is not for use with any creative suite products
including suites that contain Acrobat. It can only be used with standalone
versions of Acrobat and Adobe Reader"
Adobe X Pro forms part of my Adobe Creative Suite 6 Design Standard?
Please advise.
Thanks
Nandi

DVD menu doesn't work right in DVD players

I've created a DVD in Encore for Mac. It plays fine on my Mac and on Windows. However, once it is inserted into a stand alone DVD player, the menu doesn't work right. I have four text menus. In the DVD player, none of those are navigable. Arrowing up or down doesn't work. You have to click a number on the remote keypad and then play. This also causes "Channel 1" or "Channel 2" and so on to display. Any ideas how I can get the arrow keys to work? I don't have a stand alone dvd player to test against.
Also, in Windows, I have someone that wants to duplicate the dvd. They're using Movie Maker. It gives an error that the codec is not installed but doesn't say which codec. Any ideas on that?

The only time I recall similar problems was the issue Jeff was asking about above (Mac, Encore CS3, certain OS). If you don't solve this otherwise, I'd experiment with that.
You appear to have confirmed that there is button navigation. (In button routing, each button points to another.) Where does it break down?
On the Mac/PC, are you using the mouse? In the computer DVD software player, there should be a "remote" that you can use to see if the button navigation is working. Does the computer "remote" option work? If so, it makes it not working in a standalone player even odder.
If not, then look at whether the project works before you burn to disk. Does the "remote" work in the Encore preview? Or build to a folder, then play the DVD from the folder. (I don't know how on Mac; on PC, I find the first .ifo in the VIDEO_TS folder, and play that.)

ITSmobile standalone - F8 logoff doesn't work

Similar Messages

Maybe you are looking for