ITune 7 and video ipod - can someone please explain this?
Is there any chance that iTunes could somehow be forced to allow uploads of movies and TV shows to the iPod with 1.2 update?
My real question is, someone above says 1.2 is only for other ipods, not 5g video. Can someone confirm or deny this?
The current situation here is:
- iTunes 7 wants to update the iPod software, but when I agree to this, it ejects the ipod and the progress gauge keeps showing indefinitely.
- If I stop the iposervice, the update fails (of course!) with the 1417 error.
Multiple times:
+ I have reinstalled iTunes7 twice following all the instructions about deleting temp and iptune directories, etc.
+ I have tried disconnecting and resetting during the original update dialog.
+ I have disabled all services and tried all this again
The two problems remain:
iPod not recognized by iTunes 7 (but works perfectly with iTunes 6 so it isn't a hardware or Windows problem).
Forcing recognition by stopping and starting the ipodservice works, but the upgrade to 1.2 fails.
I could live with all the above by going back to v6, but
V6 refuses to upload purchased video content to the iPod without the updated software.
iPod 5g video Windows XP Pro normally a reasonable person
instead of stopping the ipodservice, try eboncairn's
does that get you past the 1417?
I did that. Notice that you don't address my question. I found a way to get things working and I'll post it in a second under a new title because I'm guessing a lot of desperate people will want to try it. First here's the answer I was looking for:
When IT "suggests" yopu upgrade the 5g to 1.2, the initial gauge comes up for about 40 seconds. Then a dialog comes up and after you deal with that about 1 minute 30 secs will go by.
Then, the Apple logo will appear on the pod and a guage will show the update loading for about 1 minute.
Finally there's a reboot of about 20 seconds at which time I came in my^H^H I saw the iPod in the iRuines 7 window.
I will post all the $**** I had to do to get this working under the title, "IT7 1.2 5g update - worked for me"
Two days of dicking around to watch a movie I'd already paid for.
Similar Messages
-
Regarding color picking and color management - can someone, please test this?
Please take a few seconds to test this and let me know the result.
This is with CS5 but probably the same with older versions:
Create a new document and zoom out so that the canvas is smaller than the window.
Change the Standard Screen Mode color to Custom and choose some color, for example gray that is 60 for each R,G, and B.
You can do that in the Interface page of the Preferences or by right clicking on the empty area of the window that is beyond the image's canvas.
Using the eyedropper tool pick the color of that empty area
Press Alt + Delete to fill the canvas with that color.
Do you see a difference between the canvas and that area.
I see a slight difference when the color management preview is on and no difference when it is off (soft proofing using Monitor RGB)
I have some ideas but it will be great of someone can make a clear conclusion and explanation for this behavior.Thanks for that confirmation, Chris.
Same thing with my apps, though with effort I suppose the colors for the controls and background COULD be put through the color management system at startup time... Lots more complexity though, and that would kind of diverge with the concept of theme selection, not to mention potentially uncovering bugs in the control implementations... And, if the user has gone out of his way to set everything to a pretty shade of blue, and along comes a color-managed dialog that's gone greenish because that's what those color values REALLY mean, that would likely be reported as a bug just because it's different...
-Noel -
Being brand new to FCPX and Motion 5 I want to use a motions template I have bought for a wedding DVD I have shot, so as to place the introductory template at the start of my film. I have looked at tutorials and cant seem to see anything that tells me simply how to achieve this. Do I edit my film as normal in FCPX and then transfer to Motion to add the motion template or visa versa ?? I need a simple answer as I am far from an expert. Can anyone help please.
what do you mean by 'motion template'?
as you notice on launch of M5, it offers you different project types.
when you select 'title', the minute you save it, it's avail on next launch of FCPX in the title-browser.
same with effects.
if you like to use M5 for producing a short segment (eg, I created my 'openers' with it, some animation of our soccer-team's logo, the first 4sec in this video), you simply export the final project as a Quicktime-file and add it to some Event in FCPX for future use ... -
Music in the event browser but it is not working in my video, can someone please explain this to me?
Hi I've been working on a Mac fir less than a week now and I'm using Final Cut Pro X.
For some odd reason my music isnt picking up in the timeline correctly, but is showing the audio file in the Event Library.
There are to Macs where I work and they are copies of each other; so what happens on the one happens on the other. With this in mind I duplicated the project and copied it onto the other Mac.
The odd thing about it is that 3 out of the 5 audio clips just dont pick up in the timeline that it is in the event library but you can manually find them there.
I would just like to know as how you can fix this, as I am working on a small project at the moment and if the project was bigger I would be in searious trouble.Please give the exact specifiations of the audio you're talking about? Is it compressed audio? It probably needs to be converted.
-
Reporting Level - Can someone please explain this attribute?
All - I am a relative newbie to Siebel on Demand but creating reports with other tools for years. I recently came across some reports that I have inherited that are constantly giving us trouble. They are basic reports that look at the count of calls, meetings, etc. for a given user. What we are finding is that we have used this reporting level attribute to filter but depending on the level of manager logging in it is causing problems. Some people can't see the data and some get a massive amount of duplicated data.
When it is all said and done we are looking for a simple manager-to-rep list of the counts of these activities. After looking at the reporitng level value it would look like an indicator of relative position from the lowest level in the reports-to heirarchy. We will generally filter for a level = 0 (or maybe 1) in most reports but what I want is a way to control that based on the user. My requirement is to have the level they can see and the detail at one level lower but I dont' fully understand how that gets created or how I can use system variables to find the user's level to control it.
Anyone that has any background info on this or how I can control a basic anaylytic report in a more maintainable fashion to show my stuff and subtotals at one level lower that would be greatly appreciated.Not sure if I can help with the specific report, but I will try to shed some more light on Reporting Level.
In any report where the Owned By User dimension is exposed, you can find the Reporting Level field. Each user is part of a reporting hierarchy, derived from the "Reports To" value in their user profile.
The best way to see this is to create a simple report with the User Email, Reporting Level, and Manager Email. This will show you the manager at each level. You can use this to expose and filter on the full management hierarchy.
Level 0 = the user. All users have a value of themselves as Manager at Level 0.
Level 1 = Reports To - who the user directly reports to.
Level 2+ = Up the chain...
You may want to take a look at some of the pre-built reports to see how this can be used to achieve Team based reports, such as "Team Pipeline Analysis", "Team Sales Effectiveness Analysis", and "Team Activity Analysis". You can open any of the pre-buiilt reports to use as starting points as well. -
what does it mean when you're about to install itunes and it says This update requires OS X version 10.6.8 or later.??? i don't understand... Can someone please explain to me what that means...??? And how to fix it.
1. It means exactly what it says. Apple dropped support for earlier Mac OS X versions in iTunes 10.7.
2. Update the computer to 10.6.8. If it's running a Mac OS X version prior to 10.6, this requires buying a Mac OS X 10.6 DVD from the online Apple Store, which requires an Intel Mac with at least 1GB of RAM.
(93025) -
In Pages 09 we can do Mail Merge and Import Styles from a document. Can someone please explain how we can do this with the new version of Pages 5.1. Even Apple solutions are only valid for Pages Version 09. What a DOWN GRADE! Thank god Pages 09 is still there.
…and the other 98 missing features.
Just use Pages '09, which should be in your Applications/iWork folder.
Rate/review Pages 5 in the App Store.
Peter -
I am using elements 10 and only getting audio not video. Can anyone please explain why? I am a total newbie to video.
greenfrogstone
Just saw your thread, and it looked like a candidate for the Premiere Elements 10 NVIDIA GeForce Roll Back the Driver issue. If your computer uses a NVIDIA GeForce video card/graphics card, then the following applies to you. You do not want to update the driver. Rather you want to roll back the driver version, probably to about May 2013. For your convenience I have done a copy/paste of the forum announcement which gives all the details and fix of the matter.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
This matter has been very specific to the Premiere Elements 10 NVIDIA GeForce card user. So, if your computer is using other than a NVIDIA GeForce card, it is likely that the message does not apply to you, and we can then explore other troubleshooting possibities.
Looking forward to your follow up. Do not hesitate to ask for clarification on anything written here.
Thanks.
ATR -
Can someone please explain how to download all my songs from cloud without having to tick each cloud individually
Music > iTunes Store > Music Quick Links > Purchased > Not in My Library > Download All.
tt2 -
I recently migrated from a MBP with OS 10.6 to a MCB with OS 10.8. Some glitches are popping up. Here's the one on my mind at the moment:
When saving or opening documents, I get a warning such as: "Word cannot save this document due to a naming or permissions error on the destination volume." Can someone please explain?Since this is isolated to a single file, try exporting it to Interchange Format (.inx), then open and save the resulting file as a new InDesign file.
Since the problem occurs during export, that may not be possible. Another option to try would be to copy all elements, page by page, and "paste in place" into a new document the same size. If you used layers, be sure to enable "paste remembers layers" in the layers panel menu.
This kind of problem is often indicative of an underlying font issue. You said there are only three fonts, and you should verify that in Type > Find Font... Try replacing, at least temporarily the fonts in use with something else that you know to be reliable from other documents. You might want to do this before the other steps.
Peter -
i went to update my ipad to the iOS7, but then it went into recovery and wont restore, can someone please help me figure out how to restore it?
Follow step 1 to step 3 very closely.
http://support.apple.com/kb/HT1808 -
Someone Please Explain This to me-Quad G5 running slower that Christmas
I just got my Quad Powermac G5 fully loaded w/ 8 Gigs; 2 500 Gig Hd's and this thing is running slower than my 15 inch powerbook with 2 gigs. I am running Motion 1 and I am simply taking a picture and applying an effect (nothing crazy just simple blurs and such) and it will not play in real time? it seems to be just as slow at rendering effects as my powerbook? it took 3 mins. to render 15 seconds? Could someone please explain this phenomenom? I am a little baffled and ****** off.
Quad Powermac G5 Mac OS X (10.4.3)Mac OS X is heavily cache and swap dependant, its like the OS was designed to run with flash RAM instead of hard drives or something.
The speed of Mac OS X will improve greatly upon the I/O speed of your boot drive.
Since you got the stock 250 GB, most likely without a large 16Mb cache, Mac OS X will crawl slower and slower as the boot drive fills up.
I've noticed with my brand new 20" iMac G5 that I'm getting beachballs, there is nothing hardly on the drive and it's not even hooked ot the internet and it's slow, a pig 250 GB 7,200 RPM drive.
My main machine in my signature is lighting quick, windows snap open, program launch fast as heck and boot time is under 30 seconds. Actually it's a combination of things, fast video card, plenty of RAM and fast drive I/O speed that make a Mac snappy with the feature and eye candy rich Mac OS X.
The Quad has four processors, so CPU intensive multi-threaded applications will perform long jobs in short order. As well as running many applications at once.
What will help make your Quad snappy is to replace your boot drive with a 74 GB 10,000 RPM Western Digital Raptor and keep it slim, keep your files on a second drive, leave your iTunes and User "home" folders alone on the Raptor just near empty.
I've written it up here in a text doc
(I get no comp for product mention) -
Can anyone please explain this code to me?
I am a new (junior)programmer?Can anyone please explain this code to me in lame terms? I am working at a client location and found this code in a project.
_file name is AtccJndiTemplate.java_
Why do we use the Context class?
Why do we use the properties class?
package org.atcc.common.utils;
import java.io.IOException;
import java.io.InputStream;
import java.util.Properties;
import java.util.logging.Logger;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import org.springframework.jndi.JndiTemplate;
public class AtccJndiTemplate extends JndiTemplate
private static Logger logger = Logger.getLogger(AtccJndiTemplate.class.getName());
private String jndiProperties;
protected Context createInitialContext()
throws NamingException
Context context = null;
InputStream in = null;
Properties env = new Properties();
logger.info("Load JNDI properties from classpath file " + this.jndiProperties);
try
in = AtccJndiTemplate.class.getResourceAsStream(this.jndiProperties);
env.load(in);
in.close();
catch (NullPointerException e) {
logger.warning("Did not read JNDI properties file, using existing properties");
env = System.getProperties();
} catch (IOException e) {
logger.warning("Caught IOException for file [" + this.jndiProperties + "]");
throw new NamingException(e.getMessage());
logger.config("ENV: java.naming.factory.initial = " + env.getProperty
("java.naming.factory.initial"));
logger.config("ENV: java.naming.factory.url.pkgs = " + env.getProperty
("java.naming.factory.url.pkgs"));
logger.info("ENV: java.naming.provider.url = " + env.getProperty
("java.naming.provider.url") + " timeout=" + env.getProperty("jnp.timeout"));
context = new InitialContext(env);
return context;
public String getJndiProperties()
return this.jndiProperties;
public void setJndiProperties(String jndiProperties)
this.jndiProperties = jndiProperties;
}Hi,
JNDI needs some property such as the
java.naming.factory.initial
java.naming.provider.url
which are needed by the
InitialContext(env);
where env is a properties object
Now if you can not find the physical property file on the class path
by AtccJndiTemplate.class.getResourceAsStream(this.jndiProperties);
where the String "jndiProperties" get injected by certain IOC ( inverse of control container ) such as Spring framework
if not found then it will take the property from the system which will come from the evniromental variables which are set during the application start up i.e through the command line
java -Djava.naming.factory.initial=com.sun.jndi.ldap.LdapCtxFactory -Danother=value etc..
I hope this could help
Regards,
Alan Mehio
London,UK -
Macbook Pro 2009 runs slowly and freezes. Can someone look at this Etrecheck report and tell me what's wrong?
Hardware Information:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 6 days 16:17:8
Disk Information:
FUJITSU MJA2160BH FFS G1 disk0 : (160.04 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
MacBook HD (disk0s2) /: 159.18 GB (29.38 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.spsys.driver.IOKitDriver (1.0.0d1)
com.parallels.kext.usbconnect (8.0 18615.948847)
com.parallels.kext.hypervisor (8.0 18615.948847)
com.parallels.kext.hidhook (8.0 18615.948847)
com.parallels.kext.netbridge (8.0 18615.948847)
com.parallels.kext.vnic (8.0 18615.948847)
com.parallels.filesystems.prlufs (2010.12.28)
Startup Items:
StartupComponent: Path: /Library/StartupItems/StartupComponent
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.fitbit.galileod.plist 3rd-Party support link
[System] com.spsecure.daemon.plist 3rd-Party support link
Launch Agents:
[System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[System] com.spsecure.useragent.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] [email protected]
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
iTunesHelper
AdobeResourceSynchronizer
Dropbox
EvernoteHelper
Fitbit Connect Menubar Helper
Google Chrome
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.4.4.2 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071503000004 3rd-Party support link
fbplugin_1_0_3: Version: (null) 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
MacFUSE 3rd-Party support link
Bad Fonts:
None
Old Applications:
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Amazon MP3 Downloader: Version: INFO_PLIST_VERSION - SDK 10.4 3rd-Party support link
Time Machine:
Skip System Files: NO
Auto backup: YES
Time Machine not configured!
Top Processes by CPU:
37% prl_vm_app
10% WindowServer
9% Google Chrome
1% hidd
1% Agent
Top Processes by Memory:
602 MB prl_vm_app
115 MB Google Chrome
82 MB Google Chrome Helper
82 MB Mail
70 MB Microsoft Word
Virtual Memory Information:
137 MB Free RAM
782 MB Active RAM
718 MB Inactive RAM
1.50 GB Wired RAM
23.02 GB Page-ins
1.21 GB Page-outsHey greytdogs,
I would give some of the suggestions in this link a shot:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
Can someone please test this widget?
Hi,
(sorry if this is in the wrong forum but I couldn't find a better place)
Can someone please try this widget?
http://www.apple.com/downloads/dashboard/information/speciesdistributionmap.html
The map shows on 2 out of 3 of the macs in the office but we can't determine why it doesn't work on the third... If you can see the map, then it works. We can't spot any difference in the settings on the machines
Many many thanks!
TimI have the i7-720 and the processor and I can attest to the W510 overheating. I recently had my planar replaced under warranty and it returned with an overheating issue for heavy processor loads. This overheating was resolved by properly applying thermal paste (lenovo applied about 3x as much as was needed) while the GPU continues to overheat and cause stuttering. If I run furmark in any resolution for a length of time at maximum fan speed and watch the GPU overheat, throttle, and overheat again. This would all be fine if it didn't cause the whole system to lag terribly in games or on the desktop.
In my view the design of the GPU cooler and thermal pads for the GPU memory cooling are very sensitive to installation. The cooler is easy to bend and the pressure clamp for the GPU isn't really designed to a certain tolerance. It's simply a clamp with a bent part that will apply some random amount of pressure to the gpu cooler.
It's just such a delicate system of cooling that there is too much room for error. It has to be installed correctly in order to function properly and I don't think there is really a good way of making sure that you've done it without running benchmarks for hours after reinstalling the cooler. I don't think this is something Lenovo is going to do. There aren't any options from Lenovo for a better heat sink design and I am pretty sure not everyone is having these issues.
So I'm going to mess with the GPU cooler until it starts working. Here's a furmark screenshot showing the temps.
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
Maybe you are looking for
-
Customer for confirmation of balance
How to check confirmation of balance for all customer in one time using t-code SAPF130D? Because when we use this code, we only can view confirmation of balance one customer only for one time.
-
TS3999 my calendar is not syncing with my iphone or ipad
I cannot get my calendar to sync with my iphone or ipad, any suggestions?
-
Service Desk and Change Request Config document
Hi SolMan Experts, Could you please help in getting Service Desk and Change Request Management Configuration document please !!! Thanks in advance. - Ignacio.
-
A field value is coming in caps. lf_tmp = u2018RMu2019. I have to check this with another field lf_werks ,which always comes in small letters. if lf_tmp CN lf_werks . MESSAGE e002(zm) WITH 'The Path is wrong for the plant'
-
Hi All I am selected overview in ESS home page and it was not entering showing error like below. Please send the solution of this issue pls. com.sap.tc.webdynpro.services.session.LockException: Thread SAPEngine_Application_Thread[impl:3]_1 failed to