Itune 8 refuse to switch mode

windows xp user here.
i just used itune before and i like the mini-mode.
i just upgrade to itune 8, run it, in minimode. i cannot get maximize the window. everytime i try, my computer crashes.
please help

I'm having the same problem with Itunes crashing during startup of the application, but in my case Quicktime also reports a similar error when I try to start that application. I had instigated Genius mode in Itunes when I last used it after switching to v8.0
I've tried going to add/remove programs for both quicktime and itunes and the both report fatal errors when trying to re-install. The error quoted for quicktime had the code 2869.
Any ideas on how I could fix this? Thanks.

Similar Messages

  • My itouch 4th gen refuses to switch off and i am unable to change the volume.  Can you help?

    my itouch 4th gen refuses to switch off and i am unable to change the volume.  Can you help?

    - Have you tried resetting the iPOd:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next connec the iPod to its syncing computer and try to restore the iPod.
    - The if still same. place the iPod in recovery mode and then try to restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • When I open iTunes it will automatically go to full screen mode. I can't work out how to turn this off. Only iTunes opens to full screen mode.

    When I open iTunes it will automatically go to full screen mode. I can't work out how to turn this off. Only iTunes opens to full screen mode.

    Go to System Preferences (under the Apple logo in the menu bar).  Choose "General".  Click "Always close windows when quitting an application".
    That should fix it.

  • TS3694 Ipad won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a

    Ipad 4 won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a day. I read the restore notes on apple, but this seems to be a little more unique than the standard recovery issues. Any ideas as to why I seem to keep stalling during the restore process?

    Couple of things I can think of before going to the Apple store.
    First, if you can, power off the iPad. Then connect it to the charger that came with the iPad and plug that into a known good wall outlet. Leave it there at least an hour then try to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    Also, you mentioned you have the latest iTunes. But it would be good to check the actual version. If the iPad is running iOS 7 you need iTunes 11.1 or later.

  • HT201269 Can you get your previously purchased ringtones from itunes back when you switch to a new device?

    Can you get your previously purchased ringtones from itunes back when you switch to a new device?

    Try here:
    iTunes: Error 13019 during sync

  • Error Message--ITunes runs in 64-bit mode. Uncheck the Open in 32-bit mode in Get info for ITunes. However it is UNCHECKED. I cannot access itunes at all.What now?

    Error Message--ITunes runs in 64-bit mode. Uncheck the Open in 32-bit mode in Get info for ITunes. However it is UNCHECKED. I cannot access itunes at all. What now?

    Fallout75, good catch on the eXo plugin.  To remove it, in the Finder click "Go" on the menu bar and pull down to "Go to Folder" and then type ~/Library/iTunes/iTunes Plug-ins
    When that Finder window opens, you should see an "eXo" subdirectory.  Just delete that "eXo" folder and iTunes should start without the error.

  • Why is the Camera app so slow when switching modes?

    When I switch modes between still-photo and video (or back) in the Camera application, there is a 2-3 second pause while the "iris" appears and disappears. Ok, that's not very long, but when you are in a rush to capture "that moment" it can be all the difference between "great" and "rats!".
    I get that an app can take a few seconds to load, but switching camera modes should be nearly instantaneous, shouldnt it? Do other people see the same delay, or is it just me? Are there any known tweaks to improve this delay?
    On an iPhone 4 with latest iOS.
    --Tim

    I don't know why Apple doesn't fix this problem or even acknowledge it. I have had this problem since 1.1.2. Upgrading through 1.1.3, 1.1.4 and on the 2.1 has not helped. My SMS loading time varies between 3 and 10 seconds. I maintain all my SMS messages deleted (which I should not have to do). Due to lack of support from Apple I purchased a Nokia phone for my son. At least basic phone features work like they should.

  • ITunes 10 crash if switch out & back listening to AAC files

    New bug has come up where if I'm listening to an AAC enhanced audio file podcast (such as "The Mac Observer's Mac Geek Gab Enhanced" or "MacCast (Enhanced)") iTunes crashes if I switch out of iTunes while listening and then return to iTunes. Doesn't happen with mp- versions of files ... only with the enhanced AAC. This has only started with new update (can't remember if just last or with one before). I've reinstalled iTunes on my Intel running 10.6.8

    I have an HP Pavilion m7 laptop, and this randomly started happening to me as well, about 3 weeks ago. There's stuff all over the site about rolling back the Intel HD driver, but the version of the driver I'm using was released in April, so why is iTunes just NOW thinking that it doesn't like the driver?
    I also tried doing something like updating the environmental pathway or something like that and still nothing.
    I am exceedingly frustrated with Apple Support's inability to give me a solid answer to this issue, and I was hoping the new update would fix it. All we got is Apple Pandora. Fix your freaking software before you release something new with it!

  • Muvo TX FM: is the 256mb slightly faster than the 512mb when switching modes?(and starting u

    I was just wondering if the muvo tx fm 52 is slightly slower than the muvo tx fm 256 when switching modes ?
    because i have the 52 and my dad has the 256 and i noticed there's a difference
    both of them have the lastest firmware on them .5.0
    both of them are reasonably full / capcaity close to full
    when i switch from radio mode to music in folders mode : the transition between the two modes are smooth and immediate on the 256
    but when i do this on my 52 : i seem to have to an extra second of waiting time before it goes back into music mode
    yeah i know it's a bit nitpicky to bring such a thing up , but i thought it was strange that there would be a difference , since they're both the same model and firmware ( only a difference in capacity between the 2 )
    this occurance didn't start to happen until i upgraded it recently to .5.0 ( when this occurance starting appearing )
    or maybe it's just my 52 that does this ?
    anyway another thing that's strange that i've tested :
    if i do switch back to an older firmware version for my 52mb : this extra delay between switching modes is non-existant / goes away
    ( it was non-existant before i upgraded to the new firmware )
    also another thing i've noticed is the 256 seems to be faster at starting up after turning on too
    when i first turn it on , only takes till the /4 of the sand in the egg timer icon and drained to the bottom before it starts playing music
    with the 52 , it doesn't start playing music until all the sand in egg timer icon has drained to the bottom ( a second longer wait before the music starts playing )
    also another thing to note is that
    the firmware that came with the 256 , was .5.0 ( bought in april )
    i bought the 256 a couple of months ago
    with my 52 , which i had since december : i've used firmware old firmware that came with that ( i think .0.04 ) ( until switching to the newest firmware recently )
    i was just wondering what's calling this extra seconds worth of delay in my 52 , that's not present in the 256 ?Message Edited by low-quality on 07-04-2005 0:43 PMMessage Edited by low-quality on 07-05-2005 04:08 AMMessage Edited by low-quality on 07-05-2005 05:37 AMMessage Edited by low-quality on 07-05-2005 05:38 AMMessage Edited by low-quality on 07-05-2005 05:38 AMMessage Edited by low-quality on 07-05-2005 05:38 AMMessage Edited by low-quality on 07-05-2005 05:39 AMMessage Edited by low-quality on 07-05-2005 05:39 AMMessage Edited by low-quality on 07-05-2005 05:39 AMMessage Edited by low-quality on 07-05-2005 05:40 AMMessage Edited by low-quality on 07-05-2005 05:40 AMMessage Edited by low-quality on 07-05-2005 05:42 AM

    Sounds like it could be because of the capacity difference, maybe a mod could confirm this.

  • HT203180 i converted my videos to mp4 but itunes still refuses to let it work and shows the same window shown above. I transfered all photos and music but i can not transefer my home videos. what should i do?

    i converted my videos to mp4 but itunes still refuses to let it work and shows a winow that says "....... (item) an not be copied to itunes because it can not work on your ipad" although mp4 files are supposed to work on my ipad. i tranfered all music and pictures to itunes but i can't transefer my videos. What should i do?

    Since I am impatient and can't wait for 90 minutes for an answer, I have decided to lose everything on my iPod and try to remember all the songs I had on them. But if anyone can help me prevent this in the future, that woud be great!

  • Iphone 3 refuse to switch off

    iphone 3 refuse to switch off

    You may have an app running. Try force quitting. Press and hold the On/Off Sleep/Wake button for a few seconds until a red slider appears, then press and hold the Home button until the app quits.
    If that didn't help, try here >  iPhone and iPod touch: Frozen and unresponsive

  • Is there an iTunes.exe command-line switch/syntax reference list?

    Is there an iTunes.exe command-line switch/syntax reference list?
    I would like iTunes to automatically play my music (selectable/programmable) when I click on the iTunes icon.
    Thank you in advance, ACJ

    Hi,
    Thank you for posting in Windows Server Forum.
    The switch /control indicates that you can take the control of the session which you have taken. Generally when we take remote desktop session we will already get the control of that session but in some case where some administrator will not give full access
    or control of remote session to the user. At that if they know this option they can use to control that remote session.
    Use command line parameters with Remote Desktop Connection
    http://windows.microsoft.com/en-in/windows/command-line-parameters-remote-desktop-connection#1TC=windows-7
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • NAC OOB and 6500 in Virtual Switch Mode

    Is there any issue or special care to implement NAC OOB in Central Deploy, VGW, using AD SSO for wired clients where the Core Switch is a pair of 6500 in Virtual Switch Mode?
    The customer uses Radius IAS for authentication. How does it fit with the AD SSO?

    Hi Bruce,
    I am afraid there are some arguments missing in your db command.
    To manually add the OID of  Cat4507R+E to CAM's database here is the  procedure to do this.
    [root@cca-3140-cam ~]# psql -h localhost -U postgres controlsmartdb -c "INSERT INTO supported_switch VALUES ('1.3.6.1.4.1.9.1.1286', '4', 'Cisco Catalyst 4507 R+E')" INSERT 0 1
    psql: warning: extra command-line argument "INSERT" ignored
    psql: warning: extra command-line argument "0" ignored
    psql: warning: extra command-line argument "1" ignored
    INSERT 0 1
    Then to make sure it is there:
    [root@cca-3140-cam ~]# psql -h localhost -U postgres controlsmartdb -c "SELECT * FROM supported_switch" | grep 1286
    The output should be:
    1.3.6.1.4.1.9.1.1286      |     4 | Cisco Catalyst 4507 R+E
    Restart perfigo service on NAC Manager and try to manage the switch  using the model used by the above command.
    HTH,
    Tiago
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • X-fi, Will not switch modes unless reb

    This happens to me occasionally. I will close ALL applications and then try to switch modes and its says I have an audio application open or the device is in use. Anyone experienced this and know a solution?

    kaluminati,
    Some application of yours may not have ended properly and thus could still be running in the background process and holding on to the sound device. You can access Windows Task Manager and check the processes that are still running and end it.
    Jason

  • Router power supply: Switch mode or linear?

    I need to replace a failed power supply for a router - which model doesn't really matter but the router is a WRT54GS (12V 1000mA). Which is best - a switch mode or a linear power supply? Will either be just as good? Please only answer if you DEFINITELY know the answer. Cheers, Mike

    Power adapter uses External, 12V DC, and 0.5A...

Maybe you are looking for