Itune - How to Group Different Artist into Same Ablum

I have a collection type Album - has all different artist
I would like to the songs to show up in an single cover flow
so when i go to cover flow view - there is only 1 album not multiple
right now
i have 7 album in cover flow for that collection -they all have same album name but different artist
could you please help me and give example while explaining it
i read other posts. but the explanation isn't clear
thx a million
love janet

You need to select the 1st song, then right-clock on it. Select "Get Info" from the dropdown list. On the Info window that opens, select the "Information" tab. In the bottom right corner, you'll see a checkbox named "part of a compilation".
Left-click to put a checkmark in that box. Next, click on the "NEXT" button (at the bottom-center of the window), and add the checkmark to the next song in the list. Repeat that process for all songs in the compilation album.
Unfortunately, I haven't found a way to select that checkbox for multiple songs at once... You have to manually do it to each song. (I have lots of compilation albums, and it took a LONG TIME to fix all the info.
So far, I'm pretty unimpressed with the "Genres" that iTunes created when it imported my 180GB music collection. It's taken a couple of weeks to change all 38,000 songs into the Genre folders I have things sorted into in my computer.

Similar Messages

Can you set up apple tv using 2 different itunes accounts from 2 different macs in same household?

can you set up apple tv using 2 different itunes accounts from 2 different macs in same household?

No, you can only connect to one Home Sharing account at a time. If you want to see the content of the other Mac's library you will have to turn off Home Sharing on the Apple TV and log back in with the other iTunes account.

How to display different fonts in same indicator in labVIEW

hi
i want to know how to display different fonts in same string indicator at run time in labVIEW 8.2
Regards
Abhishek Verma

Hi ABHI VERMA,
see this http://digital.ni.com/public.nsf/allkb/6BD344ACA4DEE20A8625692700737E16
Mike

How can I use iTunes Match on two different accounts on same computer?

What happens if I enable iTunes Match in a different account on my Mac Pro. I am already set up with iTunes Match because I was travelling and I wanted to use my iPhone on the road but not fill up the storage. I turned off iTunes Match in my primary account (user of course) becuase I have all the "original" music in that library. I have another account though that I would also like to be able to use just some of the music at different times. I have a separate account for using Final Cut Pro X.
So, would ITunes Match be the solution I am looking for? iCloud status gives me all of the music I have purchased but it is short about 800 music files.

I know that. When I talk of accounts I mean user accounts on the Mac Pro. I am looking for a solution that wil keep iTunes libraries, playlist, etc insync between two user accounts on the computer.

Combine different artists into one album

I just downloaded O Brother, Where Art Tho? into my library. Each song is by a different artist and I want to combine all into one album. Same with Eric Clapton. He did one song with Blind Faith, one with Cream, etc and I want them all under 'The Cream of Eric Clapton' not under each group. How can this be done?

Is this in iTunes?
There is a separate discussion group for iTunes.
In iTunes, select the album and Get Info.
Check the box that says, "Compilation".
The album will show under the artist heading "Compilations".

Module-pool: how to create different blocks at same screen

hi experts,
can i create different blocks at same selection-screen in module-pool? if yes,how?and can i use 'loop at screen' in dat case?
thanks.

you can do that...
you have create subscreen areas in the screen painter and call the selection screen on those areas..
Just see the stpes..and follow the sample code..
REPORT ztest_mod.
DATA: kunnr TYPE kunnr.
"if you want to create blocks same like selection screen the
"you have to create them as subscreen,
"place them in subscreen area.
* Custom Selection Screen a
SELECTION-SCREEN BEGIN OF SCREEN 0200 AS SUBSCREEN.
SELECT-OPTIONS: s_kunnr FOR kunnr.
SELECTION-SCREEN END OF SCREEN 0200.
START-OF-SELECTION.
"in this screen i have a button with function code 'SEARCH'
" and a subscreen area with name sub
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
ENDMODULE.                    "status_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
"for reading the selection screen fields
DATA:
      i_dyn_fields LIKE TABLE
                     OF dynpread
                   WITH HEADER LINE.
MOVE:
    'S_KUNNR-LOW' TO i_dyn_fields-fieldname.
APPEND i_dyn_fields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = '0200'
    TABLES
      dynpfields           = i_dyn_fields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc eq 0.
   read table i_dyn_fields index 1.
    s_kunnr-low = i_dynp_fields-VALUE
    s_kunnr-sign = 'I'.
    s_kunnr-option = 'EQ'.
    append s_kunnr.
ENDIF.
DATA: it_kunnr TYPE TABLE OF kna1.
CASE sy-ucomm.
    WHEN 'SEARCH'.
      SELECT * FROM kna1
      INTO TABLE it_kunnr
      WHERE kunnr IN s_kunnr.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                    "user_command_0100 INPUT
Flow Logic
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN sub INCLUDING sy-repid '0200'.
PROCESS AFTER INPUT.
MODULE user_command_0100.
Regards
Vijay Babu Dudla

How to make Different Price for same product in one Sale Order

How can i customizing my system?
I need to sale for different price same product A in one sale order. And price condition type cant be manually. i can separate them by position. for ex. in first position: product A is one price and in 2nd product A with discount. i tried to do it by changing a price group for 2nd position to determinate a discount condition but it generates invoice split.
Someone have any suggestions?

Hi
you can have it automatically determined after some custo and using userexit_pricing_prepare_tkomp in MV45AFZZ and RV60AFZZ.
The idea is to use ítem category field (PSTYV) as a part of pricing data to determine different prices for same material by changing manually ítem category when creating a sales order
- you'll need to create a new ítem category copied from the one you´re using and do all assignments
- add field PSTYV, if not there, to pricing field catalog. This thread has an example on how to and coding required for userexits
http://scn.sap.com/thread/1693234
- Adjust your pricing sequence as per new table
- Maintain specific prices in new table for materials with this new ítem category
Finally, when creating a sales order change, when required, default ítem category by new one to get specific price for material.
Regards,
JM

SRM SC Migration - How to group SC Items into PO based on a custom made fld

When migrating Shopping Carts in SRM items are grouped into PO based on Supplier (LIFNR).
ITEM data in SC has a new, custom made field BE_NR that contains PO numbers from the legacy system.
Customer wants that PO's are created out of the SC based on the value in BE_NR. They want that items with the same BR_NR are grouped into same PO.
How can I group all the items with the same BE_NR in one PO?

Hello,
You can try the following badis:
BBP_BS_GROUP_BE - for classic scenario
BBP_GROUP_LOC_PO - for extended classic scenario
Regards,
Ricardo

How to Group messages in a same queue

Hi all,
if it's possible.... how can I group messages of a same interface in one only queue???
because today if SAP sends 100 iDocs, it generate 10 queues with 10 LUW each one... I want only one queue with 100 LUWs
I want it, even if the third message comes 10 minutes later and the queue is still being processed...
example....
my queue (Q1) has 2 luws being processed, and there's other queues with many other interfaces messages (Q2, Q3....Qn) and ten minutos later comes a third message wich should have to be on Q1... I don't want a new queue, I want the new message in queue(Q1) then i'll have sorted my three messages in only one queue
Any idea? thanks

because today if SAP sends 100 iDocs, it generate 10 queues with 10 LUW each one... I want only one queue with 100
LUWs
There is an option of Queue Priritization (document available for the same in SDN)....using this you can make sure that all the message related to an interface are processed in a pre-defined queue only.
Check if this is what you are looking for.
Regards,
Abhishek.

How to set different renderers to same column

I am trying to set different renderer to same column.
table.getColumn("columnname").setCellRenderer(
FirstCellRenderer);
table.getColumn("columnname").setCellRenderer(SecondCellRenderer);
I want both to work at the same time.
It is taking the second renderer but not first.
Can anyone please help me, how can i achive it.

In my situation i need first renderer for all the columns in the table.
Second renderer only for one column.(which shows thw column value as tooltip)
Can you please tell me how can i do it.
when i tried to consolidate in one renderer , it is showing me the same value to all the columns.

How to group UI components into an array in MXML

Hi all,
I'm new in Flex. I want to group UI components into an array
in MXML, but I don't know how to do so. Pseudo code looks like
following:
<mx:Text id="arrayItems[]"/>
<mx:Text id="arrayItems[]"/>
<mx:Text id="arrayItems[]"/>
In AS3, I would like to execute a method as follows:
<mx:Script>
<![CDATA[
private function setTextFields():void {
for (var i:int = 0; i < arrayItems.length; i++) {
arrayItems[ i ].text = "Text " + i;
]]>
</mx:Script>
Anybody please help me to correct the MXML code above.
Thanks alot,
KhoaNgo

The easiest way is to use a repeater.
HTH;
Amy
"KhoaNgo" <[email protected]> wrote in
message
news:gpla74$78u$[email protected]..
> Hi all,
>
> I'm new in Flex. I want to group UI components into an
array in MXML, but
> I
> don't know how to do so. Pseudo code looks like
following:
>
> <mx:Text id="arrayItems[]"/>
> <mx:Text id="arrayItems[]"/>
> <mx:Text id="arrayItems[]"/>
>
> In AS3, I would like to execute a method as follows:
>
> <mx:Script>
> <![CDATA[
> private function setTextFields():void {
> for (var i:int = 0; i < arrayItems.length; i++) {
> arrayItems
.text = "Text " + i;
> }
> }
> ]]>
> </mx:Script>
>
> Anybody please help me to correct the MXML code above.
> Thanks alot,
> KhoaNgo
>

Can't Access iTunes Library on a Different Disk, but Same Computer

In order to avoid conflicts, I installed FCP X on a separate start-up disk and kept FCP Studio on its original start-up disk. Since FCP X is now on a different start-up disk, however, I can no longer access my iTunes Library from within it and the music I already own.
How is the best way to gain access to the Library? Is there a way to set a pointer to it? Does it have to be duplicated in its entirety and moved to the new start-up drive? What is the process I need to follow?
Any help appreciated.
JC

Uh, I fear you followed some wrong directions. This is what you should have done:
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
It sounds as if in part at least this is what you did, at least when you say you are going to preferences and changing things.
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library. Do this with both computers if the shared library file is on the external drive.
Note, the file can only be in use by one computer at a time. You will have to quit iTunes on one computer before opening it on another.

How to Pick differant price for same activity based on employee grade?

Hi,
My Requirement is -
1. We are using Machine -1 for manufacturing purpose. In this machine, There 3 employees who are authorized to work... (Eg. Employee A -Employee B -Employee C)
2. We have an Activity type for Machine hour. The price given in KP26 is 10$ per hour and assigned it in Work Center.
3. But Employee A hourly price is 12% & Employee B hourly price is 10$ -Employee C hourly price is 8$.
4. Now with the current set up, system is taking 10$ for any of the above employee which is not correct.
Requirement is - When Employee A works on this machine, system shoule take 12$ per hour and If employee B woks on this machine, system should take 10$ per hours and For Employee C, system should pick 8$ per hour. How to get different activity rate when using different employee?
Kindly help me how can i configure for this requirement. Please give me some inputs..
Thanks
F4N

hi..
You can map in the following manner :
             You creat One WC and define three operation against each Employee and define three activity and plan your rate in KP26 against each activity
                       WORK CENTRE     Machning
                         Activity
OPRN -1(Emp-A)     A-1
OPRN-2(Emp-B)     A-2
OPRN-3(Emp-C)     A-3
     So from operation One system will take hr * rate to calculate cost of oprn of employee and so on....
Please test and write back for any help.
kkumar

How to group measurement data into different groups using TDMs

Hi, frnds!
I have designed a labview program for measuring the power current characteristics of a laser diode. I want to save the current and power arrays measured at different temperatures in different groups. I tried to implement this but I was not successful. The current and power measurements at different temperatures are being saved only in the first group and the rest are being empty! Please help me save the measurements in different temperature groups.
I need this urgently!
Thanks in advance!
Kumar

Perhaps a snippet of the code you are using would help. When you write to the TDMS file with the low level functions, you just need to specify the separate group names. Have you read over the NI TDMS File Format, Introduction to LabVIEW TDM Streaming VIs, and Writing TDM and TDMS files articles? Have you tried any examples out of the Example Finder?
As a basic example:
Certified LabVIEW Developer

How GL groups AP transactions into Journals

Hi,
When I transfer AP transactions like validated invoices and payments how they get grouped into Journals in GL. Is it one Journal per invoice/payment or invoice lines can be distributed to multiple journals? What is the criteria transfer program or GL uses to group invoice lines or payment lines to Journals?
When I checked Vision database, I found a invoice lines ( distributions ) were seen in multiple journals, I also noticed one Journal made of just one invoice distributions. I also seen one Journal has multiple invoices distributions? I am confused and wondering if there might be some setup's/options causing this haphazard grouping. Any help in understanding this process appreciated
Thanks,

Hello.
Run the following query to see what Categories are coming from Payables.
select distinct je_category
from gl_je_headers
where je_source = 'Payables'
If you enter an invoice and validate it, when you post it to GL, the invoice header and all lines will be in the same journal. Later, if you make some modification on it (cancel and re-enter a distribution, for example) those modification will go into GL in a different Journal. The same thing happens with payments.
Hope this helps.
Octavio

Itune - How to Group Different Artist into Same Ablum

Similar Messages

Maybe you are looking for