Itune is not working in my laptop which is having windows 8 operating systems
itune is not working in my laptop which is having windows 8 operating systems after installing itune 64bits.
Dear Thomas A Reed,
Thank you so much for you reply. Is that possible to do the retore of my Mac without Disk. I have tried other Movie Disk as you mentioned and that worked properly. so now according to you my disk is not good.
Its really strange that i am using my installtion disk first time and it has no scratch but its not working. now I guess I have to replace new DVD with this one.
Thanks again.
Kind Regards,
Sghalay81
Similar Messages
-
Itunes is not working on my laptop and I need to back up my contacts on a 3Gs phone?
Itunes is not working on my laptop and I need to back up my contacts on my 3Gs Iphone?
Hello KP530,
It sounds like you are unable to unlock your phone because you cannot use the screen, and you need to back up your phone. I recommend these steps from the article named:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Connect the device to the computer with which you normally sync and open iTunes.
Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
If the device is still disabled, or if iTunes does not automatically sync your device, sync the device with iTunes.
When the backup and sync is complete, restore your device.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 sameArchived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases. -
I am trying to download photos from my iPod to either an external hard drive or my computer, which has a Windows operating system. The iPod should function like an external hard drive, right? My photo files/computer/hard drive were damaged. Can I put my photos on the iCloud, and then save on external drive? Not sure how to o this either. I lost a few years of baby photos. Thanks for any help!
iTunes syncing to iPods (that are not iPod touch) mostly goes one way, from computer to iPod. For photos, at the time you synced the photos to the iPod, there is a setting that you needed to have enabled in iTunes if you later want to recover them from the iPod. This setting is on the iPod's Photos tab in iTunes (where you set up photo syncing). There is a checkbox for Include full-resolution photos.
IF that checkbox was checked, you can Enable disk use on the iPod's Summary tab, and find the full-res photo files in the Photos folder on the iPod. Otherwise (if setting not checked), when iTunes syncs the photos to the iPod, iTunes converts the images to a very low-resolution version that is optimized to fit the small iPod screen and stores the image data in a single database file (to save storage space). There may be third-party software that can extract separate photos from that database file, but the resulting photos will look bad blown up to computer screen size. -
Optical mouse (AVF AM1940U) is not working in CQ40-101TU which is running Windows 7 32-bit.
Hi. I'm using Compaq CQ40-101TU which is running Windows 7 Professional 32-bit.. My optical mouse (AVF AM1940U) is not working in USB ports. The pointer of mouse is always stuck at top of the screen. I can move the mouse left or right to both edges of the screen at the top and can right click in this regard it works but I cannot move the mouse down the screen.
What is the problem? May I know how to solve it?
Thanks.Ya. Another mouse didn't have problem. This is the first time I face this problem. When this optical mouse is plugged into USB ports, the driver named "iBall Advanced Mouse" is being installed. After that, my mouse cannot working.
Is that I have to install another driver before using this mouse?
Thanks. -
Wifi is not working properly once i updated to the new operating system.
My I pphone 4s wifi is not working properly once the softwere is updated to the new IOS.
It shows the wifi but when selected its says "unable to connect". I tried connecting to many wifi networks but gives the same error message.
Kindly advice how to rectify thisI am trying that and itunes says that you have to have icloud backup off. My icloud "button" is a whiteish green and does not respond to touch. I can't turn it off.
-
Audio not working in pavilion dm3 after harddrive change and operating system reload
I had hard drive failure on my Hp Pavilion dm3 and so I got a new hard drive and had the operating system reloaded and upgraded from Windows 7 Home Premium to Windows 7 Professional. My audio isn't working unless I have external speakers plugged in. I have no missing drivers in the Device Manager. The speaker icon has movement and it seems like there should be volume coming out but there's nothing.
Is it possible that while I had my machine repaired that the guy unhooked the speakers from inside the computer accidentally?
Its not easy to get into the inside of this machine the repair guys said. I did take this computer to a repair shop to get fixed because I don't know how to do all that changing. I really don't want to take it back in just yet cause Im hoping its just a driver issue.
Also before I had all this work done and computer working great, I used to have little image pop up when I would press the mute button or when I would increase or decrease the volume and I can see how high or low my volume without having to hover over the speaker icon on my taskbar. Now after the reload all that doesnt appear. The buttons work but no little image popping up and I can figure out what that driver is called.Hi,
You can alwasy roll back the updates using Windows Restore then apply one by one or Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set.... -
I just got a new laptop and itunes is not working I have tryed to reinstall it and do alomst everything and it's still not working. Help?
What do you mean "not working"? That could mean multiple different things.
If help is desired, be as specific as possible. -
itunes not working on my laptop. It gives me an error meassage, "The procedure entry point dispatch_get_specific could not be located in the dynamic link library "
See Troubleshooting issues with iTunes for Windows updates.
The issue seems similar to that in the first box though it would be nice to have the complete error message. Tearing out all iTunes components and reinstalling as given in the second box should resolve.
tt2 -
Update 11.1.4 failed on WVista and windows 7 laptops. ITunes do not work on either computer. I re-installed it on Windows 7 and again got same message"Error 7(windows error 126).
Hello notime4,
The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
I have tried several times to load version 11.4 and keep getting an error code2324, now I cannot sync any of my apple products. I set my machine to a previous recover date, now iTunes will not work at all. I get a message stating I do not have the administrator rights to download. Any thoughts on this issue?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Hello Team,
I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion.
Also, I am not being able to upgrade Mac OS X 10.7 to 10.7.4 or letest for lion.
I am facing following messages when I open itunes ( I down loaded and install new for 10.7)
Process: iTunes [463]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.7 (10.7)
Build Info: iTunes-10702101~1
Code Type: X86-64 (Native)
Parent Process: launchd [273]
Date/Time: 2012-10-22 23:33:07.226 +0200
OS Version: Mac OS X 10.7 (11A390)
Report Version: 8
Interval Since Last Report: 4918 sec
Crashes Since Last Report: 2
Per-App Crashes Since Last Report: 2
Anonymous UUID: 3DE933E2-7A48-4840-91F4-7DC466ED9C26
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
0x102a96000 - 0x103c36fff com.apple.iTunes (10.7 - 10.7) <0CC47E12-134F-A9E1-7E4F-3EAC797C3050> /Applications/iTunes.app/Contents/MacOS/iTunes
0x7fff62696000 - 0x7fff626cb1ff dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2160BH, 160.04 GB
Parallel ATA Device: MATSHITADVD-R UJ-867
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x022a, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
And Google chrome just keep loading the page for hours and nothing is appear on its browser. But safari and firefox working absolutly fine.
In addition, I have reboot computer as well but it never worked. Please help me in this occasion.
Eagerly waiting for your response on this issue.
Best Regards,You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.
-
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
-
I have just update my mac mini server to OX Yosemite, but now the iTunes is not working at all.
I have just updated my Mac Mini Server (Mid 2011) to OS Yosemite ver 10.10, after the update, iTunes is not working, and i have tried to reinstall iTunes over and over again but it was not successful , please advise if you have a solution or share similar problems. Thank you.
You have to upgrade to 10.6.8 to be able to download iTunes 10.7 or 11. The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard.
The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion.
The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion.
Maybe you are looking for
-
What's wrong with this banner or IE6/7?
Hi Something strange is going on with IE 6 and 7 re: my random banners. http://www.enhancedwireless.net/index.html If you go to this page and refresh you should eventually see 7 different banners - all of which play (eventually) on Opera, Safari, FF,
-
I dont want to use flirt maps app
I dont want to pay for flirtmaps app (Neo Network SRL). Because I brought it up membership. I would like to help to end automatic defeat. I want to return the last two payments.
-
In Logic X printing to pdf gives me strange drop shadows after the notes, text.. etc.
I'm doing a score layout in logic pro X and sended some PDF print files to my client, but he said there were drop shadows on the notes and text. It's really annoying and I can't figure out what the solution for this problem could be. I opened an olde
-
CSA and Windows Server 2008 hangs
We're having a problem where we install CSA 6.0.2.130 on a Windows 2008 server running IIS and the server hangs after login. Screen goes blank, mouse pointer is there but the system is unresponsive. It is possible to start Task Manager and it shows
-
I have defined separate number range for different for order types. PM01 - 910000000 to 919999999 PM02 - 920000000 to 929999999 .PM05 - ..... When I am creating maintenance orders, it is taking numers as 910000000, 910000020, 910000040 at a gap of 20