ITune is not working, Send Error Report

before i updated to the newer 7.0.2 iTunes it used to work perfectly fine. Now after i installed it, quick time and iTunes seem to be having a problem. I click on Quick time and it says, Buffer Overrun detected.(then it says my file directory in program files). A buffer overrun has been detetced which has corrupted the programs internal state.The program cannot safely continue execution and must now be terminated.
Itunes starts up, this agree to liscense agreement pops(sometimes this does not even pop up) up. I check yes and then the iTunes library pops up for about 3-5 seconds. iTunes has encountered a problem and needs to close. We are sorry for the incovenience. (Send error report, Dont send). How do i fix this?

replying to Duvack
I click on Quick time and it says, Buffer Overrun detected.(then it says my file directory in program files). A buffer overrun has been detetced which has corrupted the programs internal state.The program cannot safely continue execution and must now be terminated.
the QuickTime problem will probably be causing your itunes problem. (itunes needs a properly functioning QuickTime in order to work correctly.)
let's try swapping out your QuickTime.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Similar Messages

Itunes wont open/ immediate "send error report message"

So I had a problem with me trying to install itunes 7.3 because of a missing itunes.msi. I followed the instructions i found from this forum as follows
"1. Go to http://www.ccleaner.com/ and download and install CCleaner. Run this program and click Run Cleaner. This program will remove most of your temporary files.
2. Go to http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1b d/msicuu2.exe and download and install Windows Install Clean Up utility. Click on iTunes and click Remove. Do the same for Quicktime.
3. Now you need to manually delete all of your iTunes and Quicktime files. This can take a very long time. Just go to C: and start searching through.
4. Go to the Run box and type in "regedit". Go through all of the folders in there and delete all iTunes and Quicktime files.
5. Go to Add/Remove Programs and Remove iTunes and Quicktime.
6. Download iTunes again and install it."
I then tried to open itunes and immediately a message pops up asking if i want to send an error report to microsoft. It seems as though step 4 might have truly made things worse.
Someone please help
Windows XP

After you get the send error report message go to:
Start -> Control Panel (In classic view which can be enabled by clicking view classic.) -> Administrative Tools -> Event Viewer.
Select the Application log and look for the most recent errors (Marked by a red X).
Double click on the error and it will show you a full description. For an error similar to the one you are recieving it should report a 'faulting module' in the error.
Please paste that here. This will help us help you.

Ipod touch/itunes not syncing-send error report

I always had the problem but im pretty sure its common for every one else that has any type of ipod- but when i connect my ipod to the computer nothing happens. on my ipod screen it says its syncing but on the itunes window nothing happens. then if i was to unplug it, it would make the connected noise then switch to the disconnected noise- like its responding slow. Then after waiting for a minute a screen pops up that says it wants me to send an error report..
Message was edited by: kk2fine

anybody?

Itunes 8 not working, Quicktime error, Flash 8 not working

Ever since i did the upgrade to iTunes 8 on my windows vista machine, I can't get into itunes, quicktime or flash 8. This is really really frustrating seeing as i just bought a new iphone and i cant even get into itunes to sync it. Luckily I have a second computer i could use to unbrick it.
The error I'm getting when I try to open itunes,
well after i installed itunes 8 i clicked on the start menu shortcut it said please wait while windows configures itunes and then at the end it says you must restart your system for the configuration changed to itunes to take effect. so i restart my computer.. then click on the short cut again.. and it gives me the same message.. over and over!
so i tried opening an mp3 file in itunes and it throws this error..
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 8.0.1.11
Application Timestamp: 48e41bb0
Fault Module Name: QuickTime.qts
Fault Module Version: 7.55.90.70
Fault Module Timestamp: 48ba2f81
Exception Code: c0000005
Exception Offset: 0008e434
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 3081
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Ive uninstalled it, reinstalled it, like 4 times.. and cleaning the registry and everything between each install.
when i open quicktime i get this error:
Problem signature:
Problem Event Name: BEX
Application Name: QuickTimePlayer.exe
Application Version: 7.55.90.70
Application Timestamp: 48ba1f5c
Fault Module Name: QuickTimePlayer.exe
Fault Module Version: 7.55.90.70
Fault Module Timestamp: 48ba1f5c
Exception Offset: 0000130d
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 3081
Additional Information 1: 4419
Additional Information 2: ebf79ba0046ae6662468948de5348393
Additional Information 3: 6956
Additional Information 4: 7abd868591af5ec835ec4f6b692849a6
I can live without itunes and quicktime, if i have to.. but i cant live without flash.. I paid like $700 for this software, and thanks to an itunes update... i can't even use it. Flash throws the error:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Flash.exe
Application Version: 8.0.0.478
Application Timestamp: 4315901b
Fault Module Name: QuickTime.qts
Fault Module Version: 7.55.90.70
Fault Module Timestamp: 48ba2f81
Exception Code: c0000005
Exception Offset: 0008e434
OS Version: 6.0.6001.2.1.0.256.6
Locale ID: 3081
Additional Information 1: 810c
Additional Information 2: e58675b4f28fe85ffd27d4c54797659b
Additional Information 3: 1b44
Additional Information 4: abbafcc132a6306dfccb652a44439356
Anyways could some quicktime/itunes genius please help me! I'm really out of ideas and i have heaps of urgent flash work to do!
Thanks so much

I had the same thing happen to me. I am basically concerned with my itunes..

Itunes get "Send Error Report" message

Alright so when I try and open itunes I get a send error report message. I've tried updating it and that doesnt work and I've already tried reinstalling it. I thought quicktime was the error so I went to try and remove it from my computer. As it was loading to remove quicktime I got a "fatal error" message and quicktime could not be deleted.
Help please?
Message was edited by: Joshua Malin

Itunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

"Send Error Report" Message When Trying to Open iTunes

I've looked for two days to find a solution to this problem and tried everything I've come across. Nothing has worked so far, and every time I try to open iTunes I still get the "send error report". I know that that does nothing. I've un-installed and re-installed both Quicktime and iTunes and it doesn't work. I've tried to see if it will work on another account on the same computer but it doesn't work. What is the next step?
Thanks!

Good-O. Not seeing an error message there rules out another possible set of problems, so we're still making progress.
Okay, we'll try swapping out your existing QuickTime one more time, taking a few extra explicit precautions along the way.
First, download and save a fresh copy of the QuickTimeInstaller.exe to your hard drive. (Don't run the install on line and don't run the install just yet.) Get the installer that doesn't mention iTunes:
http://www.apple.com/quicktime/download/
Now head into your "Add or Remove Programs" control panel and uninstall QuickTime.
Next we'll remove any leftover QuickTime program files and folders.
Restart the PC.
Open Local Disk C: or whichever drive your program files are installed on.
Open the "Program Files" folder.
Right-click the "QuickTime" folder (if it still exists) and select Delete.
Go back into Local Disk C: or whichever drive your Operating System files are installed on.
Open the "Windows" folder.
Open the "system32" folder.
Right-click on the QuickTime file (if it still exists) and select "Delete".
Right-click on the QuickTimeVR file (if it still exists) and select "Delete".
Empty your Recycle Bin and restart the PC again.
After the PC restarts, do not open any applications. Disconnect from your network and/or the internet. Now disable all your security software (firewall, antivirus, antispyware).
Now start the QuickTime install by doubleclicking on the QuickTimeInstaller.exe file you downloaded earlier.
Reenable all security software prior to reconnecting to the internet and/or your network.
Did that install seem to go through okay? If so, does QuickTime launch normally this time?
Message was edited by: b noir

"Send error report" popup upon iTunes startup

When I try to open iTunes 7.0, after a moment of loading, a "send error report" popup comes onto the screen. This is a serious problem because it prevents me from accessing iTunes and updating my iPod. For reference, I am not experiencing any problems with Quicktime. Any suggested courses of action? I have already tried these two methods, as proposed by Apple, and nothing has been fixed.
Here are some screenshot clips of the error:
Any help is very much appreciated. Thanks!
Windows XP

Yes, it works in the new account. Thanks so much!
However, how can I make it work on my main account. Also, any ideas as to the reason it only works on this account?
the first thing we should check on is damaged itunes preference files in the account in which you're getting the crash. (there's a different set of these in each XP user account, which is how we can get the "crash in one account, launch in another" behavior.)
try the technique i describe in my reply to kusma in the following post:
b noir: Re: iTunes 7.0.1 crashing
(a few other things to check on if this doesn't pan out.)

Itunes wont open, encountered problem and send error report

Everytime i try to open windows, it says that itunes has encoutered a problem and needs to close. it has the send error report message too. please someone help

Meaghan, I already responded to your topic. Plus, it is simply not good to bury your post in other people's topics, and just for the future, if you have a problem without a good answer, don't post what has already been said in a thread. I know, the discussions take a little getting used to, but it is easy to get the hang of it after a couple of visits. You'll get it sooner or later. I know you will.

ITunes Won't Open; Get Option To Send Error Report

Whenever I try to open iTunes, I get the message, "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." I have the option to either Debug (which does nothing), Send Error Report, or Don't Send. I have tried restarting my computer, redownloading iTunes, and uninstalling and reinstalling iTunes.
Backstory: I tried downloading the new iTunes version yesterday, and acidentaly clicked the power strip reset button with my toe right in the middle of download. iTunes disappeared from my computer after I booted it back up. So I downloaded it, and it worked yesterday. I turned on my computer again today, and I get this message.

Is it possible to download an older version of iTunes to see if that works? If so, where?

ITunes "Send Error Report" Message/Quicktime Problem

This is a problem that has only occured after I updated my iTunes to 7.0.2. Some songs in my library, and all of my videos that I have bought through the Music store cause the "Send Error Report" message to come up and iTunes closes down immediately.
I read another thread that a similar problem was occuring to a customer, and one of the admins requested him to un-install Quicktime and delete 2 files out of the registry. Then re-install quicktime through the "Repair" section of the iTunes installer. I followed these steps and the problem seemed to be fixed, but then they were "re-corrupted" I guess after I restarted my computer.
Do you have any idea what would be wrong? I know it is not spyware/viruses because I have several programs to check/delete them.
Thanks for your help
-jcavanagh.

Bump for the 3rd time.
Quicktime will not even open, on a sidenote. It starts to load, then I hear some sort of beep..then it closes. I have tried re-installing multiple times and the problem continues.

I click on itunes but doesnt open and says send error report or dont send

i click on itunes but doesnt open and says send error report or dont send

You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?

Tried downloading itunes version 11.4 and received an error code 2324. Now itunes will not work at all and I cannot sync my phone, ipad or ipod. How should I proceed?

I have tried several times to load version 11.4 and keep getting an error code2324, now I cannot sync any of my apple products. I set my machine to a previous recover date, now iTunes will not work at all. I get a message stating I do not have the administrator rights to download. Any thoughts on this issue?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.

why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.

This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013

Update 11.1.4 failed on WVista and windows 7 laptops. ITunes do not work on either computer. I re-installed it on Windows 7 and again got same message"Error 7(windows error 126).

Update 11.1.4 failed on WVista and windows 7 laptops. ITunes do not work on either computer. I re-installed it on Windows 7 and again got same message"Error 7(windows error 126).

Hello notime4,
The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

My photoshop elements 9 quits working wanting to send error reports

My photoshop elements 9 stops working wants to send error reports. What can I do??

Hi,
If it's Editor which is crashing, please try the following solutions:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.

ITune is not working, Send Error Report

Similar Messages

Maybe you are looking for