Itune using Window VISTA
Hi,
Recently upgrade PC to Windows VISTA, since then Itunes doesnt sync properly with my ipod mainly songs purchased.
I made the mistake of upgrading old OS without first doing anything to itunes ?
Ive since installed latest ver7.1 successfully but still having problems sync all songs to my ipod ?
Any ideas ?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck
Similar Messages
-
Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned as it had a very noisy hard drive).
How do I transfer the library from the 160gb to the 80gb in iTunes using Windows Vista.
Nothing seems to help on the Apple support pages, so any help would be appreciated
ThanksThanks for the reply, but not actually sure how to sync a second iPod with the library of the first, as I thought it would not recognise a new iPod for copyright reasons.
Also, the files are in a location on the pc but I had to do lots of formatting amendments in iTunes as most of the stuff was on mp3 files and the formatting was all over the place. I did not want to loose any of the work by simply asking the new iPod to look at the original file and would rather copy en masse from one device to another.
Any help or pointers greatly appreciated
Thanks -
HT1567 cannot import cd into iTunes using Windows Vista
I have tried everything and am unable to import an MP3 audio CD into iTunes using Windows Vista. I am able to import regular audio CDs. Any suggestions?
Hello,
I would first suggest recreating your iTunes library file:
http://support.apple.com/kb/HT1451
If that doesn't resolve it, try pulling your iTunes preferences:
Quit iTunes if it is running.
Navigate to /User/Library/Preferences/
Drag com.apple.itunes.plist to the trash
Restart the Mac
Launch iTunes again
CG -
Syncing iPod with iTunes using Windows Vista
I bought my iPod last December and had an Hp Laptop using Windows Xp. Recently I bought a new computer that has Windows Vista on it and since then I can't sync my iPod. iTunes won't recognise that it's even connected. I have transfered all my music and have the latest version of itunes available. Is there something else I have to download to make my iPod syc up? Please help!
It should be working fine. Perhaps your cable has gone bad or the USB port has waffled. Hard to say without trying a few different things.
-
cant download itunes 10 using windows vista erroe about installation of assembly
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
I use windows vista. I moved my itunes library fromvista to data hard drive. Very little available memory on vista. I cannot sync my ipod to library anymore.
how can I fix this problem. Willy.Go to Settings>Preferences>Advanced and make sure that the location of your media library is correct.
-
I was recently prompted to update my Itunes player to the latest version. I'm using Windows Vista. I was left with an error message MSVCR80.dll and consequently no new update. I uninstalled the old version and have tried to reinstall manually several times. No luck. Consequently I have no player.
Any ideas for a fix?Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Not able to download itunes 10.5..says file ja.lprog is corrupted (its empty) and error code 2330. Not able to download/install on another drive...even external drive-same reason given. Not able to uninstall itunes to reinstall...same reason given. Using windows vista 32 bit. Please help. Difficult to upgrade apps.
Yeah...I think I found that one out the hard way already. I'll cross that bridge when I get to it. I want to get this issue fixed before I start thinking about the license issue.
ciscoasa#
ciscoasa#
ciscoasa#
ciscoasa# sh flash
--#-- --length-- -----date/time------ path
2403 0 Apr 30 2008 02:00:56 test
2285 196 Apr 30 2008 01:28:20 upgrade_startup_errors_200804300128.log
2283 0 Apr 30 2008 01:28:20 coredumpinfo
2284 59 Apr 30 2008 01:28:20 coredumpinfo/coredump.cfg
2280 0 Apr 30 2008 01:27:56 crypto_archive
2267 0 Apr 30 2008 01:27:38 log
0 bytes total (0 bytes free)
ciscoasa#
ciscoasa#
ciscoasa#
ciscoasa# sh disk0
--#-- --length-- -----date/time------ path
2403 0 Apr 30 2008 02:00:56 test
2285 196 Apr 30 2008 01:28:20 upgrade_startup_errors_200804300128.log
2283 0 Apr 30 2008 01:28:20 coredumpinfo
2284 59 Apr 30 2008 01:28:20 coredumpinfo/coredump.cfg
2280 0 Apr 30 2008 01:27:56 crypto_archive
2267 0 Apr 30 2008 01:27:38 log
0 bytes total (0 bytes free)
ciscoasa# -
Cannot do wifi sync after update IOS 6 using windows vista pc with itunes 10.7
I cannot do the wifi sync,I am using IPAD 3 with IOS 6.I heard people said to do synchronous wireless.It would work I using Windows Vista,then I using Itunes 10.7.Somebody can help me to solve these problem or give me feedback to solve these problem.
Like many others, most of the the workarounds I tried worked but for awhile only and/or not reliably. After more googling and trial and error, I finally ended up with a somewhat reliable solution using the below 2 changes. (I am running up-to-date Win7 with an Ipad2 and an Iphone5 both on ios 6 + and up-to-date Itunes software on the PC).
1) Disable IPv6 on the wireless adapter (see CKNairb's earlier post)
2) Create a bat file which stops and starts the "Apple Mobile Device" service, then starts Itunes
The bat file can be placed in any dir and a desktop shortcut created to point to it in order to easily start Itunes (right-clicking properties of the shortcut and clicking "Change Icon" will even allow the selection of the Itunes icon to make it look just right :-) )
The bat file should contain these lines:
net stop "Apple Mobile Device"
net start "Apple Mobile Device"
"C:\Program Files (x86)\iTunes\iTunes.exe"
Edit accordingly as to whether your Itunes.exe resides in \Program (x86) or \Program.
By starting Itunes using this shortcut/bat file, you will ensure that the Mobile Device service is up and running when Itunes attempts to locate the devices wirelessly - this seems to be the key issue here.
Although it is not 100% reliable, I would say that both devices are detected and synced 90% of the time. (Itunes will always find one of the 2 devices).
Anyways, based on all I have gone through to get this work, I am willing to settle for "almost reliable" solution - hopefully this may work for others as well.
Happy syncing! -
Hello, I am not able to download itunes 10.5 on my dell laptop. It says to try to download separately and then install. However, an error message still comes up. Due to this, I am not able to update any applications. I am using windows vista. If I reinstall itunes entirely, will I loose my many playlists that I have? And will this effect the same playlist that I have on my ipod???
Installing, and uninstalling, applications never touches or removes the data.
Clean out and uninstall all the apple programs and software thru Programs and manually.
Might want to use Revo and CCleaner
I always use manual standalone installers (and keep a couple backup versions)
itunes 10.5 may affect iTunes media playlists, not sure, depends on what you have.
A search of these forums will show some threads.
I'd clean up vista, you need SP2 or later, and specific error message?
I wonder as you arenot the first with a dell if maybe the OS or included software.
Security programs like Norton and older versions of Kaspersky have been implicated.
Also settings in IE that affect pop-ups and plug-ins. -
I have a new iPhone 4S, I`m using windows vista, although my computer detects an "apple iphone", iTunes is unable to detect it at all. I`m unable to sync any media..
Welcome to the Apple Community.
Once you have enabled find my phone in your iCloud settings on your phone and find my mac in iCloud settings on your Mac, you can log in at iCloud.com and see both devices on the Find my Phone feature there. -
Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise
If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting? -
Why can't I install Itunes on windows vista 64 bit?
Why can't I install Itunes on windows vista 64 bit? I have removed all apple software and repeated the reinstall many times but it fails. I get this complicated error mesage and then the installer rolls back and fails.
I get this complicated error mesage and then the installer rolls back and fails.
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply. -
Problems with iTunes on Windows Vista...please help
All started with my Laptop recognizing my iPad and iTouch just as a camera
I keep getting this error in spite of all the methods already listed....one step from formatting....this is the order of appearance of the errors please i need help
ALREADY TRIED:
-Uninstall-reinstall
-new ADMIN STAT user
-Cleaning APPLE related archives and reinstalling
-opening install with WinRAR and selecting what to install
-all forum solutions
Im using Windows Vista
THX... I'm not sure I've ever helped someone from the Canary Islands before ...
Fault Module Name: mcicda.dll
Fault Module Version: 6.0.6000.16386
That's part of your Windows operating system, relating to the MCI driver for cdaudio devices.
Perhaps try running an sfc /scannow as per:
[How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7|http://support.microsoft.com/kb/929833]
Does sfc repair any files? If so, does your iTunes start launching properly again afterwards? -
ITunes on Windows Vista...Crashes Every Time
Hi.
I just purchased an ipod nano and installed itunes on my PC (windows vista). It worked the first time but would crash 1/4 of the way through syncing my library to my ipod.
Now itunes just crashes/freezes/is completely unresponsive as soon as I open it either my clicking the icon or by plugging in the ipod.
Completely unimpressed...I have owned 10+ phones/mp3 players in the past and have never had an issue (hadn't been using itunes) with transferring files, etc.
How do I fix itunes?
I updated Quicktime and iTunes...Quicktime is working fine on its own.Hello Mariahthomas
Check out the articles below to troubleshooting issues with iTunes not starting for you on your computer. You may have to uninstall iTunes and then reinstall.
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Regards,
-Norm G.
Maybe you are looking for
-
I synced some songs I made in voice memo to itunes on my macbook. then i tried to sync them to itunes on my iphone 5 iOS 6.1.4 and it says that it can't sync cause its 8-bit. Is there a good converter that anyone has used before?
-
i just bought an LG E2742 monitor. trying to connect to my macbook pro, running mtn lion. cable is a belkin mini display port to HDMI. i can't get the display to work. i keep getting "no signal, please check your connection" error. any advice?
-
I had linked two computers and an iPad that I do not have access to and would like to unlink them. I this possible?
-
JHeadstart 10.1.3: selection required error on mandatory dropdown list
Situation: - JHeadstart 10.1.3 build 059 - One JHeadstart Group containing three item regions - All items are in the item regions and the regions are stacked (generated as tabs) - In the first region (tab) a mandatory item generated as a dropdown lis
-
"Error opening document - permission denied"
I'm using Acrobat Reader version 7.0. It refused to open pdf files on my computer. The error message that was returned is There was an error opening this document. Permission denied. I own the files, with read (and write) permissions, and acroread i