Itunes 1.11 windows 8 install problems, itunes 11.1 windows 8 install problems

I am running Windows 8 on a Dell XPS16 laptop and was using iTunes v 10 something.  When upgrading my iPhone 4S to IOS7 while connected to iTunes running on my PC, the upgrade indicated that I needed to upgrade my iTunes to v11.1 something (the latest version).  I proceeded to do this and the upgrade appeared to work OK.  However, when attempting to restart iTunes (after a reboot) all that happened was that the iTunes Software License Agreement window opened on my PC.  There are no buttons on the window, even after scrolling all the way to the bottom, and no option but to close the window.  So my current state is that I now no longer have a working iTunes on my PC.
I have tried many of the suggestions made to others who were also having problems with this upgrade.  Each time I downloaded, saved, ran or re-ran an upgrade, the install appeared to work fine and finished normally.  Each time the installation populates the \Program Files (X86)\iTunes folders and the properties of the iTunes.exe are as follows:
I thought this was to be a Windows 64 bit upgrade so I'm not sure why it gets put in "...\Program Files (X86)" as opposed to "...\Program Files". 
I have tried all of the following and each time I just get the same license agreement window shown previously:
1.  Followed an iTunes support link that indicated how to remove and cleanup all Apple software and then re-install iTunes by downloading it and using Run As Administrator to run the downloaded file iTunes64Setup.exe.
2.  Tried to troubleshoot the .exe using the properties | compatibility | Run Compatibility Troubleshooter option - no luck.
3. Numerous cycles of download and save the update, uninstall the old, install the new, install/repair the existing, etc.
Note that about a month ago, I allowed iTunes to upgrade itself to version 11.1... and the same thing happened as described above.  I spent many hours trying to resolve the issue and finally had to go back to ITunes 10 something.  I have, since that time, ignored any iTunes requests to upgrade but in a weak moment when upgrading my phone, I lost my head and let the upgrade proceed!  Hopefully someone has a solution to getting the Windows 8 64 bit upgrade working.
Any help would be appreciated. 
Thanks, Henry.

Try these
 Motherboard and chipset (4)
Select
Number
  Driver Name
Version
Size
Update
File Download
36042
  Intel chipset motherboard drivers (Intel Chipsets Device Software)
9.3.0.1021
2.61 M
12-09-26
  Download 
36043
  Intel IRST Intel Rapid Storage Technology (Intel Rapid Storage Technology)
11.5.0.12 ...
10.62 M
12-09-26
  Download 
36044
  Intel MEI Intel Management Engine Interface (Intel Management Engine Interface)
8.1.0.1263
47.09 M
12-09-26
  Download 
36045
  Intel IRST Intel Quick Start technology (Intel Rapid Start Technology)
2.1.0.1002
1.60 M
12-09-26
  Download 
 Graphics (2)
Select
Number
  Driver Name
Version
Size
Update
File Download
36047
  Intel video driver
9.17.10.2 ...118.58 M12-09-26  Download 36049
  NVIDIA graphics driver
9.18.13.5 ...207.87 M12-09-26  Download 
 Sound card (1)
Select
Number
  Driver Name
Version
Size
Update
File Download
36050
  Conexant Audio sound card driver
8.54.44.0100.49 M12-09-26  Download 
 NIC (1)
Select
Number
  Driver Name
Version
Size
Update
File Download
36051
  NIC driver
8.2.612.2 ...3.76 M12-09-26  Download 
 Touchpad (1)
Select
Number
  Driver Name
Version
Size
Update
File Download
36052
  Touchpad driver
16.2.10.15109.17 M12-09-26  Download 
 Wireless LAN (1)
Select
Number
  Driver Name
Version
Size
Update
File Download
36053
  Wireless LAN (network controller) device driver
15.5.0.42 ...178.83 M12-09-26  Download
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Similar Messages

  • Problem with iTunes. I have Windows 8 on a new laptop. Installed latest version of iTunes. Can play music in My Library but when I click on Itunes Store I get the message "iTunes has stopped working. A problem caused the program to stop working correctly.

    I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
    Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed.  No other programs have similar problem. Any suggestion what can be done?

    I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Got new computer with windows 8.1 and installed latest itunes and hooked up nano 5th gen ipod to update music librarie but wont sync what would problem be?

    Got new computer with windows 8.1 and installed latest itunes, went to update music library on my nano 5th gen and plugged in recognized in my library but when it synced , it said sync was complete but did not update at all, then reset the ipod to factory , BIG MISTAKE  plugged in again and it did the same thing except now I have no music on at all it syncs but will not put any music on , previous computer had xp on it, what would the problem be and what would solution be????
    Thanks

    c) unistalled and reinstalled iTunes
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • When I install itunes 10.5.3 i get a message " there is a problem encountered with your windows installer package ".... and i can't install it

    When I install itunes 10.5.3 i get a message " there is a problem encountered with your windows installer package ".... and i can't install it

    Have you completed all windows update including service Pack1?  If not, please complete all the windows update then follow steps below to re-install all over.
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime  
    Apple Software Update  
    Apple Mobile Device Support  
    Bonjour  
    Apple Application Support
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • My itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

    my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?

    Hello Bebyida,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    http://www.apple.com/itunes/download/
    Best of luck,
    Mario

  • Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem.

    Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem. This is doing this when installing itunes/quicktime, safari 5, mobileme control panel, and the software update itself. The itunes version is 10.3.1

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • I have windows xp. I downloaded quick time no problem still can't get itunes to install. Still get same message (a program for this install to complete could not be run).

    I have windows xp. I downloaded quick time no problem still can't get itunes to install. Still get same message (a program for this install to complete could not be run).

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • I couldn't install iTunes on my laptop and showed me "This is a problem with this windows installer package a program required to install to complete could not be run. Contact your support personnel or package vendor '.Windows of my laptop is win8 Enterpr

    Dear supporter
    I couldn’t install iTunes on my laptop and showed me “This is a problem with this windows installer package a program required to install to complete could not be run. Contact your support personnel or package vendor ‘.Windows of my laptop is win8 Enterprise Build 9200, 64bit.
    Best regards
    Majid

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Whenever I try to update iTunes to 10.5 I get the message 'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'

    Whenever I try to update iTunes to 10.5 I get the message 'There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'
    I then uninstalled iTunes to try and reinstall it but I still get the same message for both 10.5 and previous versions, please help!

    My situation:
    - get error when updating iTunes from 1041 to 1050 or above: "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
    My system: XP SP3 with all latest updates.
    Found out that the 1051 update fixes a major intrusion possibility during the update process, so I want to get iTunes upgraded to 1051.
    Did more research and the following worked (not known if all steps outlined were necessary) (I do not guarantee success nor any more issues as a result):
    - ran: MicrosoftFixit.ProgramInstallUninstall.exe (did JUST the patch option).
    - ran: Windows Installation Removal Tool.exe (uninstalled JUST the iTunes program installer folder) (this does not remove the actual program).
    - removed all apple software update registry entries.
    - removed: C:\Documents and Settings\All Users\Application Data\Apple\Installer Cache\(JUST the software updatefolders) (hidden folder).
    - removed: C:\Documents and Settings\current user\Local Settings\Application Data\Apple\(JUST the software  update folders) (hidden folder).
    - DID NOT need to restart
    - downloaded latest iTunes update (1051)
    - opened using WinRAR
    - extracted all files
    - ran JUST the apple software update MSI
    - it succeeded
    - ran JUST the iTunes MSI
    - it succeeded
    - normally I then uninstall the apple software update program, but DID NOT this time
    - DID NOT need to restart
    Hope it works for you.

  • I can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys

    i can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys??  i don't know what to do..

    Why are you unable to install the iPod Updater? Are you getting an error message? Please be specific.
    Cheers!
    -Bryan

  • Problem installing updated ITunes involving Windows Installer.

    I have an iPhone and in order to update the iPhone you need ot have the latest version of iTunes. I tried to update my iTunes and the installation process bails saying that there was a problem with Windows Installer for me computer. I have gone online and downloaded the latest windows installer on my computer and that seemed to download ok, but when I try to install iTunes again it keep bailing. Any suggestions???

    In the link below, go to the section named
    *General installation troubleshooting*
    Click on each line in that section to expand it for step-by-step directions.
    The +Clean up iTunes installer files on the computer+ is probably going to get rid of your installer problems.
    http://support.apple.com/kb/HT1926

  • TS3212 I keep trying to download Itunes to my windows pc and I'm recieveing an error message that Apple Application support not installed. How to I fix this problem?

    Every time I go and install itunes, i recieve an error message stating that "Apple application support was not found." Error 2 and keeps redirecting me to uninstall and reinstall itunes. Every time i do this, the same error message pops up. PLEASE HELP!

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • HT1923 I have iTunes installed on a PC running Windows 7. When I downloaded an iTunes update, iTunes wouldn't open, and diplayed a "system error" message: MSVC80.dll file missing. Does this indicate a Windows 7 problem? Is it fixable?

    Unable to open iTunes on PC running Windows 7. Error message: MSVC80.dll missing. ITunes had been working normally until I downloaded an update, and the error message appeared.

    Hello bhillblom,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Problem with apple installing with itunes.msi in windows 7

    At the beggining my computer showed an error with itunes.msi and I tried to fixed the error. Then I tried again to install the itunes but now itunes say that the program cant be installed. Can somebody help me??? Thanks

    Hey vic22,
    Sylvia is correct -- the 9174 has been thoroughly tested on the USB 2.0 standard.  But we still expect it to communicate properly with USB 3.0 ports.  We have seen a few cases in which specific host controllers cause unexpected behavior similar to what you describe, but in general, our USB devices are compatible with USB 3.0.
    Of course, if sticking with a 2.0 port works for your application, that will be the quickest/simplest recommendation that we can make.  If you need to move your cDAQ to a 3.0 port, let us know -- there are some troubleshooting steps we can take to figure out why you're seeing errors.
    There are some additional details in this somewhat related article.  Upgrading the drivers for your USB Host Controller might be worth a shot.
    Kyle B  |  Product Support Engineer  |  ni.com/support

Maybe you are looking for

  • In Firefox version 37.0 getting Secure Connection Failed config parameter version.fallback-limit set to 3. Does this support TLS 1.0 .

    In FF 37.0 getting secure connection failed connecting to a website. Works fine in previous version. Config parameter version.fallback-limit default setting is 3. In previous version the default setting was 1. Does the setting version.fallback-limit

  • Stored Procedures for Simple SQL statements

    Hi Guys, We are using Oracle 10g database and Web logic for frontend. The Product is previously developed in DotNet and SQL Server and now its going to develop into Java (Web Logic) and Oracle 10g database. Since the project is developed in SQL Serve

  • IDOC Scenario Steps

    I want to master IDOC scenario... Where i can see step by step of IDOC scenario?. I want steps in ECC side and steps involved in XI side.... Never saw a nice blog showing each step in details like wiki pages.... Can somebody write or do we have a det

  • Is ALV possible for this report layout?

    Hi, I'd like to know if I can create this layout in ALV (layout as seen below): ......................|..........Column Header1............|.......Column Header2..........|  ... ......................|.Col Header3..|..Col Header4.....|..Col Header5.|

  • Slide show music/in sync

    How can I match my music time with the slide show time. Also my 1st slide stops but music plays the song. Thax