Itunes 10.0.1.22 does not find Iphone 4

i had the older itunes10 before downloading the new one acouple of days ago. when i went to sync my phone today, it didnt recognize my iphone 4 at all! i tried it all, ive been online for the past 5-6 hours trying to figure out why itunes doesn't see my iphone.. i uninstalled itunes and the other programs in order. i went to device manager and updated the files. nothing, nothing at all seems to work. Doesn anybody have an answer? Please help!!!
Btw, im running win7 64bit...
thank you

I got mine to work finally, it's windows 64bit that's causing the problem (which doesn't allow installation of unsigned drivers).
I posted a fix at: http://discussions.apple.com/thread.jspa?threadID=2633005&tstart=0

Similar Messages

  • IPad does not find iphone hotspot

    I have iPhone 4S and an  iPad2 WiFi both running iOS5.1
    I use the iPhone hotspot function to get the iPad on the internett when not at home. This workes great, I had to type inn the WiFi password the first time i connected the iPad, later the iPad connects without having to type the password.
    Since iOS 5.1 the iPad sometimes have problems finding the iPhone hotspot. I turn on the "shared internet" function of the iPhone, open the smartcover on the iPad, but it does not connect (the two attached rings does not appear). If I go to Settings>WiFi on the iPad, the iPhone WiFi hotspot does not show up, the iPad just keeps searching. Then after a little while, the iPad suddently connect, ususally after I open Safari or Mail or something on the iPad. If I then close the smartcover, and leave the iPhone hotspot on, reopen the iPad smart cover, again the iPad does not seem to find the WiFi hotspot. I have to turn the hotspot function off/on on the iPhone, and then after a little while it works. When first connected,everything works OK.
    Is this a problem with iOS 5.1?

    Just going to the hotspot screen on the iPhone puts it in host mode where it's easy for the iPad to find it.
    You lose some speed due to bandwidth bottleneck of Bluetooth, but I found bluetooth tethering had fewer headaches and was more persistent.

  • ITunes 7.1.1 (5) does not find motorola SLVR L7 w/iTunes

    My Motorola SLVR L7 used to sync with iTunes. No longer, since the upgrade to iTunes 7.1.1.
    With iTunes launched, I connect the phone via my USB cable, and receive the following error message -
    "An iTunes-enabled mobile phone is connected, but it could not be identified. Please disconnect and reconnect the mobile phone, then try again."
    I noticed similar topics in this section, but I've tried several of the recommendations, without success.
    I've tried the following approaches -
    1) eject the SD card from the desktop, disconnect phone from cable, reconnect phone to cable, launch iTunes - no success
    2) #1 + reformatting the SD card from the phone in between the disconnect/reconnect
    3) reformatting the SD card from the Mac (using Disk Utility -> MS-DOS FAT-16 format), then all steps in #1
    4) download latest iTunes, to open the package, to install the iTunesPhoneDriver.pkg - reboot - no success
    Is there another solution out there?
    iMac 1.83 GHz Intel Core Duo   Mac OS X (10.4.8)   1.5 GB DDR2 SDRAM, 5G iPod 60GB

    FIXED -
    I tried re-installing the phone drivers one more time, maybe with the minor difference that the phone was connected via USB at the time. This time, iTunes recognized the phone before the restart.

  • ITunes 9.0.3.15 does not recognize iPhone 3G on Win 7

    Used to work on Win 7 and previous version of iTunes. Request assistance. Below is the diagnostics report. If anyone has a solution please write to me
    Microsoft Windows 7 Business Edition (Build 7600)
    Hewlett-Packard HP ProBook 4410s
    iTunes 9.0.3.15
    QuickTime 7.6.5
    FairPlay 1.6.16
    Apple Application Support 1.1.0
    iPod Updater Library 9.0d11
    CD Driver 2.1.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver not found.
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number F4B54E*AC1
    Current user is not an administrator.
    The current local date and time is 2010-03-13 00:34:16.
    iTunes is not running in safe mode.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {C740B8D9-8378-4526-B608-E191DFF3D8C5}
    Description: Bluetooth Device (Personal Area Network)
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 05:30:00 1970
    Lease Expires: Thu Jan 01 05:30:00 1970
    DNS Servers:
    Adapter Name: {38018372-176C-456C-A584-5EB099FD63EE}
    Description: Microsoft Virtual WiFi Miniport Adapter
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 05:30:00 1970
    Lease Expires: Thu Jan 01 05:30:00 1970
    DNS Servers:
    Adapter Name: {23E00979-0351-4F81-9616-657ED064D79E}
    Description: Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Thu Jan 01 05:30:00 1970
    Lease Expires: Thu Jan 01 05:30:00 1970
    DNS Servers:
    Adapter Name: {33005242-B26D-4D2D-8E3F-DA859A7E026C}
    Description: Intel(R) WiFi Link 5100 AGN
    IP Address: 192.168.1.2
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Sat Mar 13 00:23:47 2010
    Lease Expires: Sat Mar 13 01:23:47 2010
    DNS Servers: 192.168.1.1
    192.168.1.1
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-03-13 00:33:46.
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.0.3.15 is currently running.
    iTunesHelper 9.0.3.15 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    iPhone 3G running firmware version 3.1.2
    Serial Number: 84831*Y7H
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.
    <Edited by Host>

    Hmmmm. If you're up to date on your *Essential System Updates for Microsoft Windows 7* downloads from HP, you might already have the hotfix from the following Microsoft document. (It's included in version 1.1.) But just in case, I think it's probably worth applying:
    [USB devices that are connected to a computer may not work after the computer is idle for more than one hour Windows 7 or in Windows Server 2008 R2|http://support.microsoft.com/kb/978258]

  • ITunes 7.3.1.3 does not recognize iPhone

    I just installed the iTunes update 7.3.1.3 and when I attach the data cable to my iPhone, nothing happens. No Icon no iPhone menu, nothing. When I plug the cable into my nano, an icon immediately appears on the left of the screen and allows me to work as usual. Plug it into the iPhone and nothing. Anyone else?? HELP!

    i am having the same issue.
    i just got my iphone and synced it on my desktop to start, but my macbook won't recognize it.
    i have tried reinstalling itunes 7.3, resetting my iphone, and rebooting my computer.
    any ideas????
    D:

  • My iTunes does not find my IPOD!? What to do??

    I really need my ipod, but ALL the music disappeared..... then I tried to sync, but my Itunes does not find my ipod. What to do??

    If you are unable to restore, then type "unable to restore" into the search bar at the top of this page by Support and read the resulting help article

  • Remote does not find my Itunes Library

    I have 4 different mac and use Remote on my Ipod Touch to work with Itunes. Remote cannot connect to one of them (does not find the library). Settings (firewall, airport, account, permission, network...) on all my mac are similar but Remote does not work only with the MacBook Pro. Should I blame his airport card ? Or what ?

    I've also version 4.0 on my Ipod and I've checked the port TCP 3689 and UDP 5353 (as asked by Apple support website), they are well opened. I spent too much time on this...I give up Remote.
    Anyway thank you very much for trying to help me.

  • My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc

    My new Ipad 2 wifi does not charge and itunes does not find my device when pluged into my pc. Help

    You should probably start here and go through all of the troubleshooting steps and then report back if you are still having problems.
    http://support.apple.com/kb/TS1538

  • Itunes does not find nano

    Have had a shuffle for years, no problems. Just got the 2nd generation nano and Itunes does not find it. It seems to load on windows as a usb device but is not recognized by Itunes so does not appear as a device there...so cannot restore, etc. I have already tried all the fixes on apple's site. Deleted temp files, deleted Itunes completely and reinstalled it. Could not delete the registry files suggested...got an error message. Cannot locate the serial number...none on the nano itself nor on the box. Help says I can find it by going to settings/about. I can't find "setting" on my menu!!! Where is it? My menu only has music, fm, etc, etc and setup. And nothng in setup gives me settings or about.
    Please HELP!!
    PC   Windows XP  

    Where did you get this 2nd Generation Nano?
    Serial number is in very small type on the back of the Nano towards the bottom below the box that has the size of your Nano. Settings is on the first menu when you turn on your Nano, use the click wheel to highlight it and click the center button. First item will be About, click on it and then move your click wheel and the serial number will be the second item from the bottom.
    If you don't have any of this you don't really have a Nano.

  • After installing Mavericks iTunes 11.1.3 does not find my recent iTunes Library. Where did my current library go?

    After installing Mavericks iTunes 11.1.3 does not find my recent iTunes Library. Where did my current library go? The new iTunes opens a 2009 library on start up. My most recent library is ignored even when I go to it directly and start iTunes with it. In another thread someone suggested repairing permissions, I did that and it did not help. I ripped my entire CD collection over the summer (1000's of songs) and now they just don't exist...or I can't find them. They were there before I upgraded to Mavericks the other day. Now vanished. I have found no other issues with Mavericks (yet). Played the music last week; upgraded, now can't find my complete current library. If anyone has a clue as to what might be causing this I sure would like know. Thanks to anyone who can help.

    Hi, sorry to hear you had this problem. Sometimes after updating iTunes the library appears blank because a new library (.itl) file has been created. Anyone else experiencing this issue may be able to resolve by following the steps outlined in TS1967. There is ofter a 'Previous iTunes Libraries' folder in the iTunes folder, by quitting iTunes entirely and replacing the currently named iTunes Library.itl file with the library file named by date in the Previous Libraries folder (should look something like 'iTunes Library 2011-08-03') and renaming to 'iTunes library.itl' and relaunching you should find the library looks the same as it did before updating (metadata intact).

  • Apple TV does not find Itunes library (since Yosemite). Itunes finds apple tv without a problem.

    Since Yosemite, my apple tv 3 (latest software) does not find my itunes library anymore (imac 27" late 2013). Vice versa, via Itunes (latest version) I can perfectly stream music and videos to my apple TV. So there is communication between the two devices, but for some reason Apple TV does not find my itunes library. Sometimes rebooting all my devices works.
    any solutions for this problem?

    I solved this problem in this way:
    go to Preferences -- Sharing
    change the name of your mac (delete ALL the existing name and choose another one)
    close Preferences
    restart Mac
    open itunes
    now check if everything works on apple tv.

  • ITunes on new Mac Mini does not show shared libraries on network or songs on NAS drive

    iTunes on new Mac Mini does not show shared libraries on network or songs on NAS drive
    The latest version of iTunes on a 3-month old Mac Mini (8 gig RAM, OS 10.10.2) does not see any of the shared iTunes libraries on a  MacBookPro (MBP) (OS 10.9.5) and a 14-month old Mac Mini (OS 10.9.5). And a network shared drive/media server does not appear as well. I have a Gigabite Ethernet G4 and on it, the MPB and the "old" mini I can see the various shared music libraries and NAS, but not on the new Mini.
    The little house with a music note inside it that I see on the upper left corner of the iTunes 12.1 window on my MBP does not appear on iTunes 12.1 on the new Mac Mini. I have gone through all the iTunes preferences and can not find where I can turn on this feature. The new Mac Mini is on the local network and I can reach the internet successfully.
    I have been using iTunes since its beginning (still have a PowerTower Pro with a working copy of SoundJam), so I am not a newbie, but this has me baffled.

    May I add, that I gave full rights to the user at the Mac Mini to access and change data on the server drive for ITunes Media.

  • Hello everyone, Very recently itunes on my windows computer does not let me access any items in my Library except for "Apps" and "Ringtones". When I click on any other items it flashes the redcircle meaning forbidden".

    Hello everyone, Very recently itunes on my windows computer does not let me access any items in my Library except for "Apps" and "Ringtones". When I click on any other items it flashes the redcircle meaning forbidden".
    When I connect my iPhone or iPad I can see every items on them but not on the iTunes Library.
    They sync fine with iTunes.
    I browse all the menus in iTunes but cannot find any clues to what I have done for it to happen. It worked fine previously.
    Thanks for any suggestion.

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • My Airport Express is green, but my computer does not find it on a scan.  I have used it before, but it just stopped working.

    My Airport Express is green, but on a scan, my computer does not find it.  I normally use it to play music from my Itunes to my house stereo speakers, and the icon shows up in itunes.  it stopped working and now my computer does not recognize it.  Help!!!  I hate listening to music on small speakers.

    Hello there Karen,
    It sounds like you are having to power cycle your modem to get internet back every single day. We can start by troubleshooting your Airport Express to help isolate the issue. I would first perform a Soft Reset, then test the issue again. If needed as a last resort I would then perform a Hard Reset:
    Soft reset
    Connect the device to power and wait for it to complete its start up process. To learn more about the start up process, please see All about Wi-Fi base station Status Lights (LED).
    Press and hold the reset button with a pen, pencil, or straightened paperclip for 1 full second, then release it. The light (LED) will begin flashing amber, indicating that the device is in soft reset mode.
    From the AirPort menu bar item, choose the network created by the device (the network name does not change).
    Open AirPort Utility from Applications > Utilities.
    Select the base station, then click Edit (The Edit window will indicate that the base station is in Soft Reset mode).
    Move through the tabs to make changes to your passwords or other settings as needed, and click Update and Continue as required
    Quit AirPort Utility.
    Hard reset
    Press and hold the reset button with a pen, pencil, or straightened paperclip until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
    Release the button and the device will reset.
    Wait about a minute for the base station to finish restarting, then open AirPort Utility from Applications > Utilities.
    Select the base station from Other Wi-Fi Devices, then click Edit.
    Select the Other Options button.
    Select "Restore previous settings" and click Next until you get to the final window.
    AirPort Utility will indicate that Setup is complete. Click Done.
    Quit AirPort Utility.
    Resetting an AirPort base station FAQ
    http://support.apple.com/kb/ht3728
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • TS1424 I downloaded a song that I purchased from the ITunes store, but the song does not play properly.  How can I re-download the same song without having to purchase it a second time?

    I downloaded a song that I purchased from the ITunes store, but the song does not play properly.  How can I re-download the same song without having to purchase it a second time?

    I could not find an option to "report a problem".
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Maybe you are looking for

  • No result  when I submit in background job a Z transaction

    Hi, I design a screen with the screen painters for my Z report instead of using SELECTION-SCREEN command to build my screen of selection. In the PAI process, I launch the same report in backgound with JOB_OPEN,SUBMIT, JOB_CLOSE and nothing happens. I

  • Exchange 2013 SP1 Not Receiving e-mail

    Hello, Mail flow between Exchange 2010 sp3 & Exchange 2013 SP1 (update Cu5) not working. Exchange 2013 setup is Exchange 2013 sp1 DVD Exchange 2010 when sending mail to external it's ok. Exchange 2010 when sending mail to exchange 2010 users it's ok.

  • PDF Open Parameters Inconsistent

    Hi, I am trying to use the PDF Open Paramaters to provide access to different sections of a PDF using URLs in a browser (as both HTML and XML links). For some reason, once the pdf has been accessed once, it no longer consistently opens to the specifi

  • Validation Rule Help Need

    Dear Friends, I am new to FDM. Can anyone help me out with this request? User need to validate the following formula to be true. 6xxxxx + 67xxxS + 68xxxx = 0 6xxxxx , 67xxxS and 68xxxx are Account Members. How do I get members which begins with 6, 67

  • Can I use a later version of photoshop with DW cs4?

    Hi, I have Dreamweaver CS4, and I need to get photoshop to use with it. Do I need to get Photoshop CS4 or would CS5 work OK? Thanks, Hazel.