ITunes 10.1.1 for Windows XP, after install errors out with messages
Installed iTunes 10.1.1 (released Dec. 15) for Windows XP 32-bit. Tried to start it but got error message as follows:
1) "This application has failed to start because VideoToolbox.dll was not found. Re-installing the application max fix this problem."
2) Then another errors pops-up:
"iTunes was not installed correctly. Please reinstall iTunes".
Error 7 (Windows error 126).
I de-installed and re-installed iTunes about 8 times, including restarting the computer and no resolution.
Today I downloaded iTunes again from the web site and it still has problems.
Any ideas on how to resolve this problem?
Thanks!
Taken at face value, you've got trouble with an Apple Application Support file. (iTunes needs a properly functioning Apple Application Support program file in order to work correctly.)
I'd try the instructions from the following post. Although it's for 32-bit Vista/7, it's pretty much identical for XP ... just read "Uninstall a program" control panel as "Add or remove programs" control panel, and "Computer" as "My Computer".
http://discussions.apple.com/thread.jspa?messageID=11901253�
Message was edited by: b noir
Similar Messages
-
when i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86" what should i do?
same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
How to create extra partitions for windows 7 after installing boot camp
hello
i am pretty new at imac so bare with me and i really need help.
IMAC
OS X version 10.9.5 ( i think its os X mavericks ??)
iMac 21. inch , Late 2013
iMac model identifier iMac 14,1
i installed boot camp windows 7 and it works perfectly, after i tried to create two partition using disk utility for windows 7 (ms-dos) format because i really want to separate my files on other partition instead of everything on Boot Camp drive. after i restart choosing windows OS i cannot go back to windows 7.
i hold option on the keyboard but does not show window 7 so i went back to Apple ox s , found my boot camp hd on the desktop with files in it. checked boot camp assistance showing
" The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. "
i read alot of article about but i don't seem to understand much about
i understand alot of people created these kind of topics
please if someone can help me solve this problem again
i only want an apple os , boot camp for windows 7 and 2 extra partitions for storage , my hard drive is 1TB
thank youLast login: Mon Feb 16 16:11:46 on console
YLFs-iMac:~ ylf$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 999.3 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *8.0 GB disk1
1: DOS_FAT_32 WININSTALL 8.0 GB disk1s1
YLFs-iMac:~ ylf$ diskutil cs list
No CoreStorage logical volume groups found
YLFs-iMac:~ ylf$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1951845952 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1952255592 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1953525128 7
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
YLFs-iMac:~ ylf$
Also i do not have boot camp installed yet because like i said, it messed up my boot camp after i created the partition thats why i removed boot camp, right now i only have APPLE OS -
TS5376 iTunes 11.1.4 for Windows: Unable to install or open.
The fix does not explain why this has been done by Apple. very poor job. What will happen to my library? Will I loose everything, only some?
Why the update was released and not fully tested before?vito580 wrote:
What will happen to my library?
Normally nothing. Back it up.
vito580 wrote:
Why the update was released and not fully tested before?
I'm sure it was tested and that no potential issues with the release were detected. Something unexpected has occured.
See Troubleshooting issues with iTunes for Windows updates. Backup tips and other advice inside.
tt2 -
Apple recomments uninstalling and installing iTunes and other Apple related software. Will I loose my data?
Thank you!Rather than using the Apple document as a guide, I currently recommend using the following user tip instead:
Troubleshooting issues with iTunes for Windows updates
Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.) -
Itunes 7.0 for windows will not install Error 1392
I get an error message when i try to update to 7.0 It says could not set security file for file 'C:\documents and settings\all users\application data/apple computer/itunes/SCinfo\'.Error1392
Hopglock,
You have your permissions on that folder or another folder in the hierarchy set to read only permission or some other security lock down. You need to turn off read only or change security permission so that the iTunes installer can write to
the
C:\documents and settings\all users\application data\apple computer\itunes\SCinfo
folder. -
Installation problem of update iTunes 11.1.4 for Windows XP
I am a Window XP user and currently using IE 8. After I update your iTunes 11.1.4 for Windows XP, my PC is cannot open the i-Tunes and has a problem of "R604" of run C runtime Library. Please Help!!!
Hello n9ming29,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
TS5376 is there a fix for iTunes 11.1.4 for Windows installation problem?
I tried the fix in "TS5376: iTunes 11.1.4 for Windows: Unable to install or open" but problem remains. We have the same issue on my dauther's PC (Windows 7 also). iTunes can't open and configure correctly.
Hey MichelHebert,
When you uninstalled and reinstalled iTunes, did you follow these steps below? This section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
from: Step 1 of Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Let us know if uninstalling those components in that order helped the situation.
Take care,
Delgadoh -
Error when trying to download iTunes 10.6.3 for Windows XP
I am receiving the following error when trying to download iTunes 10.6.3 for Windows XP:
There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package.
I have looked a several sites that have suggested several fixes, but nothing seems to work. I dont know what program I need to install so I can download iTunes; it never tells me that.
Please help!
ThanksHave you tried the following user tip with that one?
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
ITunes 11.1.4 for Window 64x cannot be installed.
Pop-up Window display: cannot start Apple Mobile Device, but I checked Services (Local), status is started. I cannot update iTunes through Apple Update, so I uninstall the older version of iTunes and download the latest version; then I run installer and the former pop-up window appears. Please help to solve the problem. I also encounter runtime error R6034.
Hello there,
It sounds like you are wanting to be able to install iTunes again, but are getting error messages when you try to install it. I would try the steps outlined in the following article named:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
It will involve uninstalling all of the associated applications for iTunes as well for a clean install.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Version 11.2 for Windows failure to install
I tried to update iTunes this morning for windows, 64 bit. When I tried to launch iTunes, I got this message:The prodecure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll.
I tried to reinstall the new version using the repair feature. Same results.
This was followed by a message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)
What is the problem?Hi Roland,
The article below has some tips that should help you get this sorted.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Resolution
These behaviors can occur if the iTunes installer has insufficient privileges to cleanly update iTunes. To resolve the issue, remove iTunes thoroughly, and then give the iTunes installer administrator privileges.
Follow these steps to resolve the issue:
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components, may have unintended affects.If you encounter an error while uninstalling, try repairing the affected component:
In Add/Remove Programs (Windows XP) or Programs and Features (Vista and later), select the component and look for either Change or Repair.
Click and follow the wizard to repair the affected component.
Remove the affected component after repair.
2. Verify iTunes and related components are completely uninstalledIn most cases, removing iTunes and its related components from the Control Panel will remove all supporting files belonging to those programs. To fully resolve these issues, manually remove any remaining iTunes-related folders listed below.On 32-bit and 64-bit systems:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files\Common Files\Apple\Apple Application Support
C:\Program Files\Common Files\Apple\CoreFP
C:\Program Files\iTunes\
C:\Program Files\iPod\
Note: Follow the additional steps at the end of this article if you receive the alert "Cannot delete iPodService.exe: It is being used by another person or program" when trying to delete this folder. Some of the folders above may not be found on all systems.
On 64-bit systems:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\CoreFP
C:\Program Files (x86)\iTunes\
C:\Program Files (x86)\iPod\
Note: Follow the additional steps at the end of this article if you receive the alert "Cannot delete iPodService.exe: It is being used by another person or program" when trying to delete this folder. Some of the folders above may not be found on all systems.
3. Reboot your computer.4. Download the iTunes installer. When prompted to select what you want to do, choose to save it to your computer.5. Install iTunes.
Right click on iTunesSetup or iTunes64Setup.
Windows Vista, Windows 7, and Windows 8: Select the 'Run as administrator' option.
Windows XP: Select the Open option.
Finish installing iTunes.
-Jason -
Why the free version Skype for Windows Desktop is the only one with ads?
Why? as the title ask? All the other Skype program on other platforn e.g. Android, iOS, Mac doesn't contain any ads, like the phone / tablet version does not seems to have one. The Mac version I don't really know, but people who uses skype on mac tells me there's no ad in their skype. Well maybe if there are, it might be not as annoying as the windows desktop version and they might have not noticed. I don't really care if you put ads in the program it's free anyway, but don't put and use ads that make the program looks cheap and annoys it user to use program. Anyway, I believe skype is seriously needed to be the main messaging/videocall app for windows (like mac's iMessage). Especially with the release of Windows 10 and if you're going to be that, putting such intrusive ads in the program is just not going to cut it, if you gonna put ads, do it right (at least). Seriously your ad placement is just like saying F**K you i'm going to put ads whereever i want. Skype is part of Microsoft now; It's very funny to see that Skype's on Windows (the OS Microsoft make) Desktop platform, is the skype platform I personally least like to use (I have use skype in android phone and tablet too, and on Mac). Like seriously, If you work with Microsoft, shouldn't you make a skype version that's bundled to Windows as Messaging service, like Windows Messenger back in windows XP days?
Hi Shanny33,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
After instailling iTunes 7.4.1 for Windows, my system slows down to a crawl
After downloading and installing iTunes 7.4.1 for Windows XP Professional, my system slows down horribly, and I cannot seem to find out why. Rebooting before installing this version of iTunes did not take long at all, yet after installing iTunes, rebooting takes at least 4 times as long, and the system runs very slowly/poorly. What has caused this problem? I have other friends who have HP Pavilion laptops using Windows XP who are using iTunes and iPods with no problems at all. I have restored my system back to the state before installing iTunes in SAFE MODE, but now I am unable to use my iPod or iTunes. Anyone having this problem?
In my experience iTunes has never been stable in a Windows operating system. If it's not one thing it's another. Right now I'm having video play back issues with tv shows on iTunes, good thing I have the iPhone now so I can watch them on there.
-
had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you! -
After updated to iTunes 11.1.4 for windows vista , I was unable to open iTunes and it keep error message. My iphone unable to USB hotspot the internet to computer. Pls Help
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2
Maybe you are looking for
-
Hi all, Have created a new window in one of the scripts recently. I was asked to display this window( with some data) only for company code NL01. So I kept the condition , IF reguh-zbukr = 'NL01'..and wrote the code.. Now Im asked to extend the func
-
I have installed Illustrator CCloud and uninstalled, and reinstalled, it just bounces on the dock and does not open (do I need to Uninstall CS5) Thanx
-
Is there risk in partitioning an external HD that has existing files on it?
I have a 1TB external hard drive which has a lot of movies, songs and photos, etc. which I don't have backups for. The hard drive has 500GB left, and I want to make a partition of 400GB for Time Machine. I have heard that if you make a partition on a
-
win 8.1 64bit MS-7885 mobo Bios 1.3 gfx: Nvidia GTX 980 16 GB RAM Realtek drivers 6.0.1.7293 Samsung UHD monitor, HDMI in Yesterday I purchased a new Samsung 4K monitor that has Display port and HDMI in. Now the analog jacks on the motherboard seem t
-
How to change datasource name based on the partition in configplan
Hi Can any one please give me some solutions regarding how to change datasource name based on the partition in configplan. can't we do this in configuration plan?