ITunes 10.1.1 Windows 7 Ultimate x64 Issues

I have recently upgraded my windows system to Windows 7 Ultimate x64 and after installing the latest iTunes i realised that i couldn't connect any of my mobile devices (2x iPhone 3G's or my iTouch 4G).
After hours of researching the web i came to the conclusion that the latest version of iTunes doesnt contain the proper driver files for my specific system.
Has anyone else had this problem ? Or is my (brand new) pc busted ?
P.S. After uninstalling iTunes 10.1.1 for the Millionth time, i installed the older 10 version and it worked perfectly.
I am going to try updating through the iTunes updater to see what happens.

No problems about the late response. Discussions has been quirky for a lot of people lately.
Since we last spoke, labnut2 has posted a nice step-by-step version of the RandomBehavior instructions in the following post:
http://discussions.apple.com/thread.jspa?messageID=12739276#12739276
Good luck for next week!

Similar Messages

Apple push and Lycn conflicting - windows 7 ultimate x64

Hi,
I have Windows 7 Ultimate x64. I have iTunes installed and Microsoft Lync 2010. Whenever Lync is open and I try to open iTunes, I get this pop up message saying the "apple push has stopped working" and gives me the choice to close the program, thus I am unable to sync my iphone. Now if Lync is closed, I can open iTunes with no issues or errors and use it normally, but if itunes is open, I click to open Lync, a pop up windows opens for 3-4 seconds, a window that looks like it is installing Lync and the green bar fully loads in these few seconds, then the window disappears and Lync does not open. After this happens, I open taskmgr and I see "communicator.exe" which is Microsoft Lync, but there is no sign on windows which shows that it is open, only taskmgr shows that it is open in processes. It took me a while to figure out what was conflicting with what, but I finally found out that the issue if apple push that is affiliated with itunes, and microsoft lync. Is there any solution to this? I tried uninstalling and re installing both programs, but the problem still persists.
Thank you,
Malek

Might try this.
1. Launch Adobe Creative Cloud
2. Go to Preferences and then signout
3. Relaunch Photoshop and resignin using same Adobe ID.
See the following link for further info: http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately- launch.html

Distribution of JRE on Windows Vista Ultimate x64

The automatic update of the JRE on my Windows Vista Ultimate x64 system often comes up saying a new update is available but then as soon as I go ahead to install it, the update tells me that the particular version of the JRE is already installed.
How can this automatic update bug for new JRE installations be fixed.

iTunes cannot work if Quicktime doesn't, so that has to be fixed first.
Have you ever installed any of the following:
ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter
If so the must be uninstalled.
Then or if you don't have them then continue with this;
Download the version of QUicktime that does not include iTunes:
http://www.apple.com/quicktime/download/win.html
Remove Quicktime using the method for QUicktime in this article:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
When you get to the system32 folder, you can delete any file or folder with Quicktime in the name.
Restart your PC and then install the Quicktime you just downloaded.
Check to see if it works and if it does try iTunes.

HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) USB controller not working

I am having problems with my HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) Intially Windows 8 was installed but I got windows 7ultimate for it and now I'm missing the drivers for it.
I don't know how to fix this problem, I have tried everything. I downloaded an program called DeviceDocter and it downloaded the thing but then an error saying. Your system does not meet the miniumum requirements for this update. Update has been cancelled. (9996). It says AMD USB Controller Driver. It should work on my computer since it's Windows 7 Ultimate x64. Please help me fix my ports. Just my 2 ports on my left side of the computer isn't working. The right side of the computer port is working.

Thanks for the help, but I found the program to fix it. After searching for hours. I stumbled upon this link and it finally worked and the unknown device was only my headset and the other one I just updated by making it search online for the software. Here is the link for other people to use to fix their usb port problems. - http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?javax.portlet.begCac...

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

Adobe CS4 Design Center Premium Installation issues on Windows 7 Ultimate x64 (RTM)

I am in the process of moving my systems to Windows 7; as part of that I have attempted to install the Adobe CS 4 Design Center Premium version that I purchased on August 16th. Thus far my experience with this has been disappointing.
My previous system (Windows Vista x64 Ultimate) was running Adobe CS 4 Production Premium version without problems. Upgrading this to Windows 7 worked just fine (so, Win 7 upgrade over Production Premium worked.) However, for unrelated reasons I decided to reinstall a fresh version of Windows 7. and the Adobe CS 4 Design Center Premium version in question.
What I observe is a highly repeatable failure during installation, in which as soon as I get to the phase where it displays "Currently installing LangPack(English) for Device Central" and then dies. Applications are half installed at that point (I can actually use most of the tools, which is why I keep setting this aside to look at it later.) This was a clean system and Adobe CS 4 Design Center Premium was the first thing I tried to install on the box.
Since that failure, I have tried to install it on a completely different system (my laptop) running Windows 7 Ultimate x64 and experienced the same error. The desktop system is a Dell, the laptop is an HP.
The event log indicates a generic "event ID 1000" error. The detailed information shows that something returns STATUS_INVALID_PARAMETER (0xC000000D) as an exception, which is not handled and the program then dies.
Log Name:      Application
Source:        Application Error
Date:          9/11/2009 6:56:19 AM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      wam-mps1730
Description:
Faulting application name: Setup.exe_Adobe Setup, version: 2.0.138.0, time stamp: 0x48bf0040
Faulting module name: Setup.exe, version: 2.0.138.0, time stamp: 0x48bf0040
Exception code: 0xc000000d
Fault offset: 0x000ab71f
Faulting process id: 0xb20
Faulting application start time: 0x01ca32e6eed97c22
Faulting application path: C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe
Faulting module path: C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe
Report Id: e0e73da0-9eda-11de-8e4a-001e4ce53d44
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-09-11T13:56:19.000000000Z" />
    <EventRecordID>2221</EventRecordID>
    <Channel>Application</Channel>
    <Computer>wam-mps1730</Computer>
    <Security />
</System>
<EventData>
    <Data>Setup.exe_Adobe Setup</Data>
    <Data>2.0.138.0</Data>
    <Data>48bf0040</Data>
    <Data>Setup.exe</Data>
    <Data>2.0.138.0</Data>
    <Data>48bf0040</Data>
    <Data>c000000d</Data>
    <Data>000ab71f</Data>
    <Data>b20</Data>
    <Data>01ca32e6eed97c22</Data>
    <Data>C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe</Data>
    <Data>C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe</Data>
    <Data>e0e73da0-9eda-11de-8e4a-001e4ce53d44</Data>
</EventData>
</Event>
In attempting to find a work-around (since I would like to be able to actually use everything here) I have tried to run the installer in compatibility mode - both XPSP2 and Vista SP2 mode. Both fail in the same fashion.
At this point I've now installed a post-mortem debugger (WinDBG) and will attempt to capture more information about the specific failure. I am hoping that someone has seen this issue previously and has found a successful work-around. I see that others have installed the Master Suite version successfully and I suppose that is one potential solution to the problem that I may explore if i cannot get this package to work properly.

Additional information that I have collected (the wonders of a post-mortem debugger):
0:016> kv
Child-SP          RetAddr           : Args to Child                                                           : Call Site
00000000`024ce7e8 00000000`74b0a2df : 00000000`0c12faec 00000000`0c12fb04 00000000`04fda3e0 00000000`74b0a74c : ntdll!NtWaitForWorkViaWorkerFactory+0xa
00000000`024ce7f0 00000000`74aecf87 : 00000000`00000000 00000000`00001000 00000000`0c12fd30 00000000`7efa7000 : wow64!whNtWaitForWorkViaWorkerFactory+0x23
00000000`024ce840 00000000`74ad276d : 00000000`755d0f09 00000000`00000023 00000000`00000001 00000000`0c12fae4 : wow64!Wow64SystemServiceEx+0xd7
00000000`024cf100 00000000`74aed07e : 00000000`00000000 00000000`74ad1920 00000000`00000000 00000000`00000000 : wow64cpu!TurboDispatchJumpAddressEnd+0x24
00000000`024cf1c0 00000000`74aec549 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : wow64!RunCpuSimulation+0xa
00000000`024cf210 00000000`76f4d177 : 00000000`00000000 00000000`7efdf000 00000000`7efa7000 00000000`00000000 : wow64!Wow64LdrpInitialize+0x429
00000000`024cf760 00000000`76f0308e : 00000000`024cf820 00000000`00000000 00000000`7efdf000 00000000`00000000 : ntdll! ?? ::FNODOBFM::`string'+0x2bfe4
00000000`024cf7d0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!LdrInitializeThunk+0xe
0:016> !analyze -v
Last event: 770.978: Exit process 0:770, code c000000d
debugger time: Fri Sep 11 07:33:12.750 2009 (GMT-7)
0:016> r
rax=00000000000000c0 rbx=000000000c12fedc rcx=0000000000000000
rdx=0000000000000000 rsi=000000007efa7000 rdi=000000007efa9000
rip=0000000076f217ba rsp=00000000024ce7e8 rbp=000000000c12ff88
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=0000000000000000 r12=0000000074b0a2bc r13=00000000024cfd20
r14=00000000024cf170 r15=0000000074ad2450
iopl=0         nv up ei pl nz na pe nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b             efl=00000200
ntdll!NtWaitForWorkViaWorkerFactory+0xa:
00000000`76f217ba c3              ret
Thus, this appears to be related to WoW64 behavior in some fashion. I am unfamiliar with NtWaitForWorkViaWorkerFactory, so I'm not sure why it would be returning STATUS_INVALID_PARAMETER.
So, I've collected a mini-dump for the process, but it's 300MB. In the unlikely event someone is interested in analyzing it, let me know and I'll gladly provide it.
I'm now wondering if I should re-wipe this drive, install Vista, Adobe CS 4 Design Center Premium and then upgrade to Windows 7. But that is a lot of effort to work around an app compat issue.

2 errors when trying to install cs4 on windows 7 ultimate x64

I downloaded the trial version of PS cs4 to try out on my new laptop. Its a clean install of windows 7 ultimate x64. I gets maybe 10% into the install and i keep getting these errors...
Adobe ExtendScript Toolkit CS4
Error:
Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access it.
Adobe Output Module
Error:
Error 1610. The configuration data for this product is corrupt. Contact your support personnel.
If somebody could shed some light on what i can do to make this work that would be great. Ive tried redownloading the installer probably 4 or 5 times now. Ive tried running in compatability mode and ive made sure its being ran as an administrator.
Thanks

Some of CS4 might be installed so you will need to run the clean script.
http://www.adobe.com/support/contact/cs4clean.html
Just install photoshop and bridge only. You can install the other stuff later on (not need to run bridge nor PS anyways)
Do the install only on C drive too.

Adobe AIR won't install - Windows 7 Ultimate x64

"Sorry, an error has occurred.
An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
Well, I asked myself and verified that I am allowed to install any programs I wish to at will.
I even toyed with adding extra permissions for the .exe and shortcut [see below], to no avail.
I also checked your Adobe AIR installation troubleshooter section before posting. Unfortunately, none of the solutions 100% applied to my circumstances or OS, yet I tried a few anyway and had it confirmed by a Windows dialogue that I need not have bothered as it assured me that they weren't applicable in my case.
I found another thread like mine where somebody suggested creating a shortcut with an additional -uninstall parameter added to the .exe path. It didn't work.
I used Microsoft's Installation Cleanup Utility and that didn't work to "un-confuse" the installer either.
Do you have any more suggestions?
Adobe AIR came with the HTC Sync program for my phone, which appears to have dependencies on it where it won't completely work without it.
Thanks in advance for any input.
ps. I created a new thread because I couldn't find the "reply" button on a similarly unresolved thread regarding Adobe AIR installation issues on Windows 7.

I would like to say thanks to artrose54 and to playswithtech for their thoughtful responses to my problem. I finally figured out which number I was to delete, and then, having made a copy of the number in notepad, deleted it. Upon a restart to my computer I then was able to download adobe air 2.7. I found that I still could not download the shutterfly express uploader, however; so I applied the same approach. I went looking for the number in the registry that corresponded to the uploader. I deleted it; restarted the computer; returned to shutterfly; and then was able to download the express uploader. I am sure I will find other uses for Adobe Air in the future.
From: artrose54 <[email protected]>
To: Sandra Buchin <[email protected]>
Sent: Sunday, June 26, 2011 12:37 PM
Subject: Re: Adobe AIR won't install - Windows 7 Ultimate x64
Hi everyone,
Here is the fix that worked for me,
You need to go to start run and type in regedit
now press ctrl+f for find and type in "adobe air" without the quotes then click find next
the first entry it finds is the one I deleted, it is a long number on left side of screen that is greyed just right click and delete it
I then rebooted the computer and ran adobe air installation
and it worked with out a problem
The adobe air log file really doesn't tell u anything but where it tried to find the setup.msi file
but it doesn't exist because of the registry entry that needs to be deleted which is what causes the error
If u r not sure of editing the registry then maybe you know someone that can help you
I hope this helps you out it worked for me

Distribution of Java JRE on Windows Vista Ultimate x64

The automatic update of the Java JRE on my Windows Vista Ultimate x64 system often comes up saying a new update is available but then as soon as I go ahead to install it, the update tells me that the particular version of the JRE is already installed.
How can this automatic update bug for new JRE installations be fixed.

Uninstall the software cleanly via the "Add or Remove programs" panel, then run another install. The breakdown is in the licensing system, not the application itself. Do not run the clean scripts until you have attempted this. If it still fails, then indeed a call to Adobe tech might do wonders...
Beste Grüße
Mylenium

HP 350 G1 ACPI\HPQ6007 *HPQ6007 Unknown Device Driver for Windows 7 Ultimate x64

Hi,
I have recently purchased HP 350 G1 latop and there is a missing driver in device manager under Windows 7 Ultimate x64 that I cannot find out what driver it is, could you please help identify the hardware and provide me link to the driver?
ACPI\HPQ6007
*HPQ6007
Thanks.
James
This question was solved.
View Solution.

Hi,
Download and install HP 3D DriveGuard from the following link.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6709431&swItemId=ob_124661_1&swEnvOid=405...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows 7 Ultimate x64 Drivers not working

When I installed Windows 7 Ultimate N x64 on Boot Camp, it worked fine, I could get into the Windows Partition no problem. When I try to install the Boot Camp drivers for Windows, it says that it can't run the program or that it is incompatible with my version of Windows. I can't connect to the internet or use the trackpad. Any help? It was a subscription version of Windows 7 Ultimate from MSDN.

How did you obtain the BC drivers? Please post the year/model of your Mac.

ITunes 64-bit and Windows 7 Ultimate 64-bit

I have a relatively new installation of Windows 7 Ultimate 64-bit and have not moved the "Music Folder" to a new location. I have moved the "My Documents" folder to a new location tho. Inside of the "My Documents" folder, I see folders named "My Albums" and "Music Lyrics", but no "Music" or "My Music".
After installing the 64-bit version of iTunes, I get the following error.
The folder "iTunes" cannot be found or created and is required.
The default location for this folder is inside the "Music" folder.
I have researched and seen many references to this error and Windows XP, but nothing for Windows 7.
Ideas?

Something may be awry with the special registry permissions on the My Music folder, Just. I think the iTunes installer looks for those in order to determine just where the default location of My Music is on a given computer.
But since this is a first-time install, the situation should be pretty simple to recover from.
Hold down the shift key when you go to launch iTunes. In the dialog box that comes up, select "Create library" and put the library where you please.
Probably a good idea after doing that to try launching iTunes again, just to make sure that it is still finding the iTunes folder. But by default, next time you open iTunes (after creating a new library), it should try to open the library in the location you created the library in.

ITunes 7.6 and Windows XP Pro x64 ---- 64 bit version of Windows XP Pro

My wife was given an iPod nano, so I downloaded the current version of iTunesSetup.exe from www.apple.com and tried to run the executable. It told me that it wasn't designed to install iTunes on my 64 bit version of Windows XP Pro, and that I should go back to www.apple.com and download the 64 bit installer. I went back to www.apple.com and searched for the 64 bit installer in vain. There is only one main link to the current installer and the website determines which version of the installer you're given. After a few google searches I managed to aquire iTunes64setup.exe from the Apple site. I ran the executable and it told me "This iTunes installer requires that your computer is running Windows Vista 64-bit" and then it gave me the option to exit. I ended up installing iTunes from the executable I had originally downloaded. I have iTunes 7.6.2.9 installed now but it doesn't detect, or can't operate my DVD burner, so I can't rip music with iTunes for use on my wife's nano. I get this error report when I run the Diagnostic test built into iTunes.
"Microsoft Windows XP Professional x64 Edition Service Pack 2 (Build 3790)
System manufacturer System Product Name
iTunes 7.6.2.9
QuickTime 7.4.5
CD Driver Not Available
CD Driver DLL Not Available
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number xxxxxxxxxxxxxxxx
Current user is an administrator.
The current local date and time is 2008-04-30 23:34:07.
iTunes is not running in safe mode.
Video Display Information
Standard VGA Graphics Adapter
NVIDIA GeForce 8800 GT
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
LowerFilters: Afc
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel."
And there was no change in the diagnostic when I first tried to repair the install and then tried to reinstall iTunes. I'm sure the burner is working because I can play music, watch movies and all the normal stuff a DVD burner can do using Nero.
I'm guessing I need an iTunes version of 64 bit optical drive driver.
Any help would be appreciated!
Cinder's
<Edited by Moderator>

I got the iTunes 7 to work on XP Pro 64bit. What I did was this:
1. Downloaded DriverInstaller_AMD64EM64T.exe
2. Installed it.
3. Created this file tree: C:\Windows\Sysnative\drivers (Easier terminology, I went into the Windows folder and created a folder named "sysnative", opened that folder and created another folder called "drivers".
4. Then I located the folder where I installed DriverInstaller_AMD64EM64T.exe ..
5. I took the file called GEARAspiWDM and COPIED IT. I DID NOT MOVE THIS FILE!!!
6. I pasted a COPY of this file into sysnative\drivers. The folder I just made.
7. I installed iTunes 7, not 7.6. 7.6 and this method won't solve the burning issue. That would require more programs and more patients.
Note, you will have to manipulate iTunes when you want to burn. The best way to do this, I found, was to simply make a playlist and right click the playlist on the left column and select burn to disk. It should act normally.
Message was edited by: Nexis

Cannot install Visual Studio 2013 on Windows 7 Ultimate x64

Hi,
I'm trying to install Visual Studio 2013 under Windows 7 Ultimate SP1 x64. If it matters the Windows O/S is an image running under Parallels.
I've had Visual Studio installed on this machine before (I can't remember the version) but have uninstalled it.
I'm getting an error "Microsoft .NET Framework required for Microsoft Visual Studio Express 2013 for Windows Desktop - ENU".
I've been Googling this issue for hours, trying numerous things suggested, to no avail. Apparently it's a common error.
I've got the .Net Framework 4.5.1 installed. I've also reinstalled it and repaired the installation. I suspect the error message is a stupid red herring.
I'm at my wits end on this. Any advice on how to get this bug ridden swill to install?
P.S.: Clearly this is a known and highly frustrating issue for many people. Why can't Microsoft find the bug, fix it, and put an updated installer on their download site. Is this too much to ask?

You need to go to the MSDN website for Visual Studio 2013 found @
http://msdn.microsoft.com/en-us/library/dd831853.aspx
The webpage with the system requirements has a Support tab for help with Visual Studio @
http://www.visualstudio.com/products/visual-studio-2013-compatibility-vs
You need help for the application, not for Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Itunes continually freezes - Running Windows 7 Ultimate

Can anyone assist - my iTunes continually freezes and I have to end the process and try again. Sometimes this works, sometimes it doesn't.
My PC is a Corei7, 12 GB ram running 64 Bit Windows 7 Ultimate
This is extremely frustrating - my prior PC's running both XP and Vista had similar issues
Appreicate any direction

Try working through this troubleshooting article:
http://support.apple.com/kb/TS1717
If you had similar problems on other PCs, it makes me wonder if you have software in common that does not play nice with iTunes.

ITunes 10.1.1 Windows 7 Ultimate x64 Issues

Similar Messages

Maybe you are looking for