ITunes 10.1 64bit on Windows 7 Ultimate x64 has bug, it freezes ...

I am using Windows 7 x64 Ultimate (Traditional Chinese) and I was using iTunes 10.0 for a few months without any problem. A few days ago, when I want to upgrade my iPhone 3GS to iOS 4.2.1.
I upgrade the iTunes to 10.1 64 bit and found out it freezes when it startup at the first time. after a while, it looks okay and I was able to play the MP3 etc... however, when I plugin my iPhone 3GS (with 3.1.2 firmware) into my PC. it freezes again. I already tried to reboot my PC several and it still doesn't work.
I thought it might be my iPhone need to upgrade to iOS 4, so I use my friend PC to do the upgrade. Now, my iPhone is at iOS 4.2.1. however, when I plugin the iPhone back to my PC, the iTunes still freezes..
I tried to uninstall all the apple softwares and re-intall the iTunes 10.1. it still doesn't work.
I also tried to reinstall the older 10.0.1 version; however, the iPhone iOS 4.2.1 cannot work with 10.0.1 version.
I am now in a dead-end and feel very frustrated..... could any one helps?
I am using the avast anti-virus, could it be the root cause? but, it works well with iTunes 10.0 before
Message was edited by: r390gt1

I notice that the iTunes 10.1 is running at 32-bit and it installed on the Program Files(x64) folder. I have manually download the 64bit version, but the iTunes is still not responding when I plugin the iPhone.
Something wrong with the iTunes 64 installer.

Similar Messages

  • ITunes 10.1.1 Windows 7 Ultimate x64 Issues

    I have recently upgraded my windows system to Windows 7 Ultimate x64 and after installing the latest iTunes i realised that i couldn't connect any of my mobile devices (2x iPhone 3G's or my iTouch 4G).
    After hours of researching the web i came to the conclusion that the latest version of iTunes doesnt contain the proper driver files for my specific system.
    Has anyone else had this problem ? Or is my (brand new) pc busted ?
    P.S. After uninstalling iTunes 10.1.1 for the Millionth time, i installed the older 10 version and it worked perfectly.
    I am going to try updating through the iTunes updater to see what happens.

    No problems about the late response. Discussions has been quirky for a lot of people lately.
    Since we last spoke, labnut2 has posted a nice step-by-step version of the RandomBehavior instructions in the following post:
    http://discussions.apple.com/thread.jspa?messageID=12739276#12739276
    Good luck for next week!

  • Apple push and Lycn conflicting - windows 7 ultimate x64

    Hi,
    I have Windows 7 Ultimate x64. I have iTunes installed and Microsoft Lync 2010. Whenever Lync is open and I try to open iTunes, I get this pop up message saying the "apple push has stopped working" and gives me the choice to close the program, thus I am unable to sync my iphone. Now if Lync is closed, I can open iTunes with no issues or errors and use it normally, but if itunes is open, I click to open Lync, a pop up windows opens for 3-4 seconds, a window that looks like it is installing Lync and the green bar fully loads in these few seconds, then the window disappears and Lync does not open. After this happens, I open taskmgr and I see "communicator.exe" which is Microsoft Lync, but there is no sign on windows which shows that it is open, only taskmgr shows that it is open in processes. It took me a while to figure out what was conflicting with what, but I finally found out that the issue if apple push that is affiliated with itunes, and microsoft lync. Is there any solution to this? I tried uninstalling and re installing both programs, but the problem still persists.
    Thank you,
    Malek

    Might try this.
    1. Launch Adobe Creative Cloud
    2. Go to Preferences and then signout
    3. Relaunch Photoshop and resignin using same Adobe ID.
    See the following link for further info: http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately- launch.html

  • Distribution of JRE on Windows Vista Ultimate x64

    The automatic update of the JRE on my Windows Vista Ultimate x64 system often comes up saying a new update is available but then as soon as I go ahead to install it, the update tells me that the particular version of the JRE is already installed.
    How can this automatic update bug for new JRE installations be fixed.

    iTunes cannot work if Quicktime doesn't, so that has to be fixed first.
    Have you ever installed any of the following:
    ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter
    If so the must be uninstalled.
    Then or if you don't have them then continue with this;
    Download the version of QUicktime that does not include iTunes:
    http://www.apple.com/quicktime/download/win.html
    Remove Quicktime using the method for QUicktime in this article:
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    When you get to the system32 folder, you can delete any file or folder with Quicktime in the name.
    Restart your PC and then install the Quicktime you just downloaded.
    Check to see if it works and if it does try iTunes.

  • HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) USB controller not working

    I am having problems with my HP Pavilion 17 Notebook PC (Windows 7 Ultimate x64) Intially Windows 8 was installed but I got windows 7ultimate for it and now I'm missing the drivers for it.
    I don't know how to fix this problem, I have tried everything. I downloaded an program called DeviceDocter and it downloaded the thing but then an error saying. Your system does not meet the miniumum requirements for this update. Update has been cancelled. (9996). It says AMD USB Controller Driver. It should work on my computer since it's Windows 7 Ultimate x64. Please help me fix my ports. Just my 2 ports on my left side of the computer isn't working. The right side of the computer port is working.

    Thanks for the help, but I found the program to fix it. After searching for hours. I stumbled upon this link and it finally worked and the unknown device was only my headset and the other one I just updated by making it search online for the software. Here is the link for other people to use to fix their usb port problems. - http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?javax.portlet.begCac...

  • Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?

    Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant.  I haven't been able to find any kind of an .inf file to use.  Does anyone have a solution?  Or is Apple's implementation of HDCP (if it's there) incomplete?

    I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

  • Adobe CS4 Design Center Premium Installation issues on Windows 7 Ultimate x64 (RTM)

    I am in the process of moving my systems to Windows 7; as part of that I have attempted to install the Adobe CS 4 Design Center Premium version that I purchased on August 16th.  Thus far my experience with this has been disappointing.
    My previous system (Windows Vista x64 Ultimate) was running Adobe CS 4 Production Premium version without problems.  Upgrading this to Windows 7 worked just fine (so, Win 7 upgrade over Production Premium worked.)  However, for unrelated reasons I decided to reinstall a fresh version of Windows 7. and the Adobe CS 4 Design Center Premium version in question.
    What I observe is a highly repeatable failure during installation, in which as soon as I get to the phase where it displays "Currently installing LangPack(English) for Device Central" and then dies.  Applications are half installed at that point (I can actually use most of the tools, which is why I keep setting this aside to look at it later.)  This was a clean system and Adobe CS 4 Design Center Premium was the first thing I tried to install on the box.
    Since that failure, I have tried to install it on a completely different system (my laptop) running Windows 7 Ultimate x64 and experienced the same error.  The desktop system is a Dell, the laptop is an HP.
    The event log indicates a generic "event ID 1000" error.  The detailed information shows that something returns STATUS_INVALID_PARAMETER (0xC000000D) as an exception, which is not handled and the program then dies.
    Log Name:      Application
    Source:        Application Error
    Date:          9/11/2009 6:56:19 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      wam-mps1730
    Description:
    Faulting application name: Setup.exe_Adobe Setup, version: 2.0.138.0, time stamp: 0x48bf0040
    Faulting module name: Setup.exe, version: 2.0.138.0, time stamp: 0x48bf0040
    Exception code: 0xc000000d
    Fault offset: 0x000ab71f
    Faulting process id: 0xb20
    Faulting application start time: 0x01ca32e6eed97c22
    Faulting application path: C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe
    Faulting module path: C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe
    Report Id: e0e73da0-9eda-11de-8e4a-001e4ce53d44
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2009-09-11T13:56:19.000000000Z" />
        <EventRecordID>2221</EventRecordID>
        <Channel>Application</Channel>
        <Computer>wam-mps1730</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Setup.exe_Adobe Setup</Data>
        <Data>2.0.138.0</Data>
        <Data>48bf0040</Data>
        <Data>Setup.exe</Data>
        <Data>2.0.138.0</Data>
        <Data>48bf0040</Data>
        <Data>c000000d</Data>
        <Data>000ab71f</Data>
        <Data>b20</Data>
        <Data>01ca32e6eed97c22</Data>
        <Data>C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe</Data>
        <Data>C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe</Data>
        <Data>e0e73da0-9eda-11de-8e4a-001e4ce53d44</Data>
      </EventData>
    </Event>
    In attempting to find a work-around (since I would like to be able to actually use everything here) I have tried to run the installer in compatibility mode - both XPSP2 and Vista SP2 mode.  Both fail in the same fashion.
    At this point I've now installed a post-mortem debugger (WinDBG) and will attempt to capture more information about the specific failure.  I am hoping that someone has seen this issue previously and has found a successful work-around.  I see that others have installed the Master Suite version successfully and I suppose that is one potential solution to the problem that I may explore if i cannot get this package to work properly.

    Additional information that I have collected (the wonders of a post-mortem debugger):
    0:016> kv
    Child-SP          RetAddr           : Args to Child                                                           : Call Site
    00000000`024ce7e8 00000000`74b0a2df : 00000000`0c12faec 00000000`0c12fb04 00000000`04fda3e0 00000000`74b0a74c : ntdll!NtWaitForWorkViaWorkerFactory+0xa
    00000000`024ce7f0 00000000`74aecf87 : 00000000`00000000 00000000`00001000 00000000`0c12fd30 00000000`7efa7000 : wow64!whNtWaitForWorkViaWorkerFactory+0x23
    00000000`024ce840 00000000`74ad276d : 00000000`755d0f09 00000000`00000023 00000000`00000001 00000000`0c12fae4 : wow64!Wow64SystemServiceEx+0xd7
    00000000`024cf100 00000000`74aed07e : 00000000`00000000 00000000`74ad1920 00000000`00000000 00000000`00000000 : wow64cpu!TurboDispatchJumpAddressEnd+0x24
    00000000`024cf1c0 00000000`74aec549 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : wow64!RunCpuSimulation+0xa
    00000000`024cf210 00000000`76f4d177 : 00000000`00000000 00000000`7efdf000 00000000`7efa7000 00000000`00000000 : wow64!Wow64LdrpInitialize+0x429
    00000000`024cf760 00000000`76f0308e : 00000000`024cf820 00000000`00000000 00000000`7efdf000 00000000`00000000 : ntdll! ?? ::FNODOBFM::`string'+0x2bfe4
    00000000`024cf7d0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!LdrInitializeThunk+0xe
    0:016> !analyze -v
    Last event: 770.978: Exit process 0:770, code c000000d
      debugger time: Fri Sep 11 07:33:12.750 2009 (GMT-7)
    0:016> r
    rax=00000000000000c0 rbx=000000000c12fedc rcx=0000000000000000
    rdx=0000000000000000 rsi=000000007efa7000 rdi=000000007efa9000
    rip=0000000076f217ba rsp=00000000024ce7e8 rbp=000000000c12ff88
    r8=0000000000000000  r9=0000000000000000 r10=0000000000000000
    r11=0000000000000000 r12=0000000074b0a2bc r13=00000000024cfd20
    r14=00000000024cf170 r15=0000000074ad2450
    iopl=0         nv up ei pl nz na pe nc
    cs=0033  ss=002b  ds=002b  es=002b  fs=0053  gs=002b             efl=00000200
    ntdll!NtWaitForWorkViaWorkerFactory+0xa:
    00000000`76f217ba c3              ret
    Thus, this appears to be related to WoW64 behavior in some fashion.  I am unfamiliar with NtWaitForWorkViaWorkerFactory, so I'm not sure why it would be returning STATUS_INVALID_PARAMETER.
    So, I've collected a mini-dump for the process, but it's 300MB.  In the unlikely event someone is interested in analyzing it, let me know and I'll gladly provide it.
    I'm now wondering if I should re-wipe this drive, install Vista, Adobe CS 4 Design Center Premium and then upgrade to Windows 7.  But that is a lot of effort to work around an app compat issue.

  • 2 errors when trying to install cs4 on windows 7 ultimate x64

    I downloaded the trial version of PS cs4 to try out on my new laptop.  Its a clean install of windows 7 ultimate x64.  I gets maybe 10% into the install and i keep getting these errors...
    Adobe ExtendScript Toolkit CS4
    Error:
    Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access it.
    Adobe Output Module
    Error:
    Error 1610. The configuration data for this product is corrupt. Contact your support personnel.
    If somebody could shed some light on what i can do to make this work that would be great.  Ive tried redownloading the installer probably 4 or 5 times now.  Ive tried running in compatability mode and ive made sure its being ran as an administrator.
    Thanks

    Some of CS4 might be installed so you will need to run the clean script.
    http://www.adobe.com/support/contact/cs4clean.html
    Just install photoshop and bridge only. You can install the other stuff later on (not need to run bridge nor PS anyways)
    Do the install only on C drive too.

  • Adobe AIR won't install - Windows 7 Ultimate x64

    "Sorry, an error has occurred.
    An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
    Well, I asked myself and verified that I am allowed to install any programs I wish to at will.
    I even toyed with adding extra permissions for the .exe and shortcut [see below], to no avail.
    I also checked your Adobe AIR installation troubleshooter section before posting. Unfortunately, none of the solutions 100% applied to my circumstances or OS, yet I tried a few anyway and had it confirmed by a Windows dialogue that I need not have bothered as it assured me that they weren't applicable in my case.
    I found another thread like mine where somebody suggested creating a shortcut with an additional -uninstall parameter added to the .exe path. It didn't work.
    I used Microsoft's Installation Cleanup Utility and that didn't work to "un-confuse" the installer either.
    Do you have any more suggestions?
    Adobe AIR came with the HTC Sync program for my phone, which appears to have dependencies on it where it won't completely work without it.
    Thanks in advance for any input.
    ps. I created a new thread because I couldn't find the "reply" button on a similarly unresolved thread regarding Adobe AIR installation issues on Windows 7.

    I would like to say thanks to artrose54 and to playswithtech for their thoughtful responses to my problem. I finally figured out which number I was to delete, and then, having made a copy of the number in notepad, deleted it. Upon a restart to my computer I then was able to download adobe air 2.7. I found that I still could not download the shutterfly express uploader, however; so I applied the same approach. I went looking for the number in the registry that corresponded to the uploader. I deleted it; restarted the computer; returned to shutterfly; and then was able to download the express uploader. I am sure I will find other uses for Adobe Air in the future.
    From: artrose54 <[email protected]>
    To: Sandra Buchin <[email protected]>
    Sent: Sunday, June 26, 2011 12:37 PM
    Subject: Re: Adobe AIR won't install - Windows 7 Ultimate x64
    Hi everyone,
    Here is the fix that worked for me,
    You need to go to start run and type in regedit
    now press ctrl+f for find and type in "adobe air" without the quotes then click find next
    the first entry it finds is the one I deleted, it is a long number on left side of screen that is greyed just right click and delete it
    I then rebooted the computer and ran adobe air installation
    and it worked with out a problem
    The adobe air log file really doesn't tell u anything but where it tried to find the setup.msi file
    but it doesn't exist because of the registry entry that needs to be deleted which is what causes the error
    If u r not sure of editing the registry then maybe you know someone that can help you
    I hope this helps you out it worked for me

  • I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online.   Is there a way to do this?

    I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online.   Is there a way to do this?

    Hi John,
    Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
    Linda

  • Distribution of Java JRE on Windows Vista Ultimate x64

    The automatic update of the Java JRE on my Windows Vista Ultimate x64 system often comes up saying a new update is available but then as soon as I go ahead to install it, the update tells me that the particular version of the JRE is already installed.
    How can this automatic update bug for new JRE installations be fixed.

    Uninstall the software cleanly via the "Add or Remove programs" panel, then run another install. The breakdown is in the licensing system, not the application itself. Do not run the clean scripts until you have attempted this. If it still fails, then indeed a call to Adobe tech might do wonders...
    Beste Grüße
    Mylenium

  • How can i install itunes 11.0.1 on windows xp professional x64 edition

    how can i install itunes 11.0.1 on windows xp professional x64 edition

    I have eventually managed to resolve my issue by:
    1) Installing "Segoe UI" fonts in the C:\Windows\Fonts folder.
    2) Changing my default colour profile to "sRGB Color Space Profile".
    Navigate to My Computer > Control Panel > Display > Settings > Advanced > Color Management.
    Click Add button and select sRGB Color Space Profile.icm from the Add Profile Association pop-up window.
    Select sRGB Color Space Profile.
    Click on the Set as Default button.
    Click on Apply, OK, OK.

  • HP 350 G1 ACPI\HPQ6007 *HPQ6007 Unknown Device Driver for Windows 7 Ultimate x64

    Hi,
    I have recently purchased HP 350 G1 latop and there is a missing driver in device manager under Windows 7 Ultimate x64 that I cannot find out what driver it is, could you please help identify the hardware and provide me link to the driver?
    ACPI\HPQ6007
    *HPQ6007
    Thanks.
    James
    This question was solved.
    View Solution.

    Hi,
    Download and install HP 3D DriveGuard from the following link.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6709431&swItemId=ob_124661_1&swEnvOid=405...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I am unable to update, uninstall, or reinstall iTunes on my laptop.  Windows 7 Ultimate 32 bits.  Error code is 2330.  Can somebody please help me?

    I am unable to update, uninstall, or reinstall iTunes on my laptop.  Everything was working fine until recently when there was an update available for iTunes, and when I tried to update this, I got the message, "The installer has encountered an unexpected error installing this package.  This may indicate a problem with this package. Error code is 2330."  Can somebody please help me?
    System configuration:
    Windows 7 Ultimate 32 bits.
    Version:  6.1.7601 Service Pack 1 Build 7601
    System Directory:  C:\Windows\system32
    RAM:  1.00 GB.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Tx2120us, upgrade from Windows Vista Home Premium 64bit to Windows 7 Ultimate 64 bit

    I wonder if there's anyone out there who has managed to sucessfully upgrade his/her HP tx2120us tablet PC from Windows Vista Home Premium to Windows 7 Ultimate or to do a fresh Windows 7 ultimate install on a HP tx2120us tablet PC.
    I purchased a Windows 7 Ultimate 64bit edition AND a 320GB 7200rpm hard drive and started a fresh Windows 7 installation. After the installation was done, the network adapters fixed and wireless were working. I also managed to install the Audio drivers for the built in realtek audio adapter. Even the touchpad, touchscreen and pen seem to work but then I stopped after several attempts to install a suitable display driver for the NVIDIA G-Force video adapter. The resolution with my Vista OS is 1280 x 800 but the default Windows 7 OS only provides a generic 1064 x 768 resolution and not any download from HP could install a suitable NVIDIA driver for Windows 7.
    As I stopped there I don't even know if there is a driver for the card reader or the Light Scribe DVD burner and whatever is buit in into this tx2120us.
    I'd really very much appreciate if someone who had succeeded with the installation of Win 7 Ultimate 64bit on the tx2120us could provide me with working drivers or the links to them.
    thanks

    Palm does not support 64-bit Vista for cabled Hotsyncs.
    There is a huge Vista64 bit thread at the top of this section explaining your options - BlueTooth Hotsync is about the only way you can procede with a Centro.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Maybe you are looking for