ITunes 10.1 installed but it disabled the driver for my DVD player

I installed iTunes 10.5.1.42 on my laptop HP PC  and it disabled the driver for my DVDRW player.  Before iTunes installation DVD player worked fine.  After installation DVD player does not work, and is not see by iTunes or the computer.  Device manager shows the player but indicates that the driver has been disabled.
I uninstalled iTunes and the DVD player worked.  It also worked with iTunes 10.5.0. But then I reinstalled 10.5.1.42 with the same results--disabled DVD.
Anyone with similar problem or with suggestions???

some dvd players are very picky on what they will play some only
play dvd+r some only dvd-r some can't play dvd+rw and or dvd-rw
dvd burnable is a pretty fragmented std.

Similar Messages

  • How do you change the the region for your dvd player

    I purchased a macbook pro in the USA and I am now trying to watch an American DVD on its in-built player and it is telling me that the DVD does not match the DVD region and that the DVD region can not be changed??

    See DVD Player: About DVD-Video regions

  • I cant install itunes it says msvcr80 is missing and I keep trying to re install but it said the same thing

    what do i do im really confused I keep trying to install but it does the same thing

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99905)

  • TS1702 I'm trying to get youmail. It says that it's installed but there is no app for it. When I try to get an app from the app store, it says it cannot connect to itunes.

    I'm trying to get youmail. It says that it's installed but there is no app for it. When I try to get an app it tells me that it cannot connect to itunes.

    Yes, according to my information that was the model number for what you have. If you aren't sure then open Systemp Profiler and look for the model identifier in the display on the right. Following are the identifiers:
    5,2
    6,1 (this is the Late 2009; it is model number A1342)
    This should provide all you need to pick the correct item.

  • ITunes quits when I'm trying to open it. I have installed the latest version and another user on the same Mac can use their iTunes when they log in. I have tried deleting iTunes and re-installing but it still won't open. Any ideas?

    iTunes quits when I'm trying to open it. I have installed the latest version and another user on the same Mac can use their iTunes when they log in. I have tried deleting iTunes and re-installing but it still won't open. Any ideas? Thanks.

    Hold down the option key while starting iTunes and make an new library.  Will it open then? If so, you have a bad library.  With the new library import the library.xml version of the file in your iTunes folder.  This will make it 90% like before (some metadata are not identical, but I don't know which ones).
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

  • Creative Cloud Manager is installed, but why is the icon gray?

    Creative Cloud Manager is installed, but why is the icon gray?

    Please follow the mentioned steps:
    1.  Navigate to Library/Application Support/Adobe/OOBE and rename it to OOBE.old
    2. Enable root account: http://support.apple.com/kb/ht1528 and log on to root
    3. Disable any security software if installed on Mac
    4.Delete opm.db file located at :MAC : ~/Library/Application Support/Adobe
    (opm.db file is present in your user library.This library is hidden from MAC 10.7 onwards.
    So in order to locate that,
    Click on Go at the top
    Select Go to folder
    type ~/library/
    This will take you to the library folder and then you can locate opm.db file at Application Support/Adobe)
    5. Download CC desktop from www.creative.adobe.com and try to install it. Incase you are not successfull then please Check the Activity Monitor and see if AAM process is running, if yes then try to kill the process.opm.db file needs to be deleted in order to process further. WIN 7 and 8 (64 bit):
    Rename OOBE to OOBE_old located at C:\Program Files (x86)\Common Files\Adobe
    Relaunch the Browser
    Go to https://creative.adobe.com/products/creative-cloud
    Sign in with Adobe ID and password and download CC desktop app.
    http://forums.adobe.com/message/5466160
    These steps might help you.
    Regards
    Rajshree

  • TS3988 I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud?

    I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?

    Same question Wish someone had replied!
    I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple!

  • I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed"

    iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
    '“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed.'
    I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
    If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
    '“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed.' - this is as far as I can get it to go; most frustrating!
    I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

  • Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll     Verify that you have access to that directory."

    Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll     Verify that you have access to that directory."

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I am using a T61 ThinkPad with an external hard drive and my itunes library keeps disapearing but remains on the external drive. Any idea how to fix this so my music doesn't disapear all the time? It's a real drag pulling music back into iTunes each week.

    I am using a T61 ThinkPad with an external hard drive and my itunes library keeps disapearing but remains on the external drive. Any idea how to fix this so my music doesn't disapear all the time? It's a real drag pulling music back into iTunes each week

    In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

  • I reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

    i reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

    Click here and use Apple's iForgot service, or contact their Account Security team, or if you're the device's original owner, take it and its purchase receipt to a physical Apple Store.
    (124525)

  • I just downloaded itunes to my PC but cannot find the library page to start transporting music files

    I just downloaded itunes to my PC but cannot find the library page to start transporting music files  ?????

    I have music on a stick drive which I want to transport to itunes on my desktop PC running Vista.  I  downloaded itunes but cannot find a page on itunes to load the music onto..               When I put the stick into the USB port,   an AutoPlay box comes up which says Play   using .Windows Media Player..............Import  music, pictures, video  using Real Player.   Open folder to view files using Windows explorer      etc.....& set Auto Play Defaults in control Panel.                            By library page, I mean the page on itunes where the music would be transported to & listed by each name so I can listen to it.

  • I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

    I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

    If it is the first CS version then you will need to check out the following.  I believe it applies to CS as well even though it specifies CS2....
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • Need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

    need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit

    When you contacted the modem manufaturer what did they have to say?

  • I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". Ihave re-installed but still receive the same message. Any ideas please.

    I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". I have re-installed but still receive the same message. Any ideas please.

    Make sure your user account has full administrative permissions.  Then, at this stage of the game, I would take the following steps:
    - Re-create the Preferences file following these instructions:
    Re-create the Photoshop Elements preferences file to eliminate problems that a damaged preferences file might cause.
    Note: When you use this solution, Photoshop Elements will create a new preferences file and you will lose custom settings associated with your current preferences file. However, the file you rename in step 2 is your original preferences file. If you determine that the preferences file is not causing the problem, then you can restore your custom settings by undoing the instructions below.
    To re-create the Photoshop Elements preferences file:
    Quit Photoshop Elements.
    Locate the Adobe Photoshop Elements preferences files. In Photoshop Elements 5.0, there are two preferences files, one for Organizer and one for Editor:
    Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Organizer\psa.prf
    Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Editor\Photoshop Elements 5 Prefs.psp
    Rename the extension for the files (for example, to psa.old).
    Start Photoshop Elements. Photoshop Elements creates a new preferences file.
    I doubt that this will fix your problem, however, it is always the first thing to try.  If it does not, take these steps:
    - Uninstall Photoshop Elements
    - Run the Windows Installer CleanUp Utility (http://support.microsoft.com/kb/290301)
    - Reinstall Elements
    - Reinstall the 5.0.2 patch
    Good luck,
    Juergen

Maybe you are looking for

  • Installation problem with KM collaboration

    Dear All, I am trying to install KM on WEBAS 6.4 patch 9. I am using master CD to start SAP INSt.. then i specify location for NW Component CD and give user logon details.. it starts installation, but in second step itself. it gives error: ERROR 2006

  • My report is printing half of the page when I print the report Hp psc 1315

    My report is printing half of the page when I print the report in this printer Hp psc 1315 all in-one and when the operating system is windows xp , but when I run the same report in windows me , and the same printer it is running well And my report v

  • I do not have a photo button option

    I do not have the option to sync or upload photos to itunes because I do not have the button as an option. This is a new computer and a new ipad. I was able to get it to work once and upload pictures to my ipad from my old laptop but now its not even

  • PARALLELS AND PALM

    I am trying to get my Palm to work with Parallels but it keeps crashing.  Mac software for the Palm is terrible.  I have tried transferring data to a mac and it just scrambled my data. Can someone tell me if you can use a Palm with parallels software

  • Selecting front panel properties after runing causes crash

    After I run my program (which uses several call library function nodes to access numerous dll files) and then try to alter the properties of a front panel control labview crashes. Sometimes it simply locks up, other times it displays a recoverable er