ITunes 10.1 Major bug fix?

I recently upgraded to version 10.1 as I was excited to try out iOS 4.2... Only to find that there were some interface bugs on installation.
http://img641.imageshack.us/i/buggyitunes.jpg
Does anyone know of a solution to my problem?? It's stopped my iPhone from connecting to the internet for some reason! :'(
Thanks in advance!
Nick x

... talk about a picture telling a thousand words ...
Apparently that one's not new to 10.1, Nick, but it does seem to be striking more commonly on 10.1.
In most cases, it seems related to various troubles with the Segoe family of fonts on the PC. There's a variety of particular causes though.
It might be best to head to the following thread, and have a read through the various descriptions of the various problems. I'd try reading the entire thing prior to checking to see what seems to be the most likely cause of the issue on your PC:
http://discussions.apple.com/thread.jspa?threadID=2647111

Similar Messages

Solution: iTunes "Analyzing Gapless Playback" Bug Fix

I have seen many complaints of a problem that has become somewhat commonplace in iTunes. I work for a major Technical Support company and get customer complaints about this often. It is frustrating because I generally am good at solving issues. Now I have a solution and I wish to share it with everyone.
The Problem
The issue is whenever you open iTunes it begins "Analyzing Gapless Playback" for a certain number of songs. In my case I have discovered that once this issue begins happening...every single song you add to iTunes thereafter will be added to the list of songs that need to be analyzed. I had this issue in Lion and Mountain Lion. But I have heard lots of people have the same issue with previous versions of OS X.
The Cause (hypothisis)
My hypothesis is that the problem is that iTunes loses the ability to physically write the ID3 tag information. When you make changes to files the changes are saved in your iTunes library files but nowhere else. Because iTunes detects the ID3 tags untouched when it opens it assumes that they have not yet been checked for gapless playback thus performs the check. The problem lies in permissions. Some change you make (OS Upgrade, Reinstall, etc) cause the permissions in the folder to not allow iTunes to write the ID3 tags. I have tried everything I could think of to fix this and was unable to do so. I tried using MP3 repair programs (MP3 Scan & Repair.app)
The Solution
I have tried a lot of different things to fix this and the only thing I figured out is kind of a "catch all" but it works none the less. I want to preface this with saying this is kind of an extreme pain the neck thing to do but it fixed my issue. In my iTunes preferences I have enabled Keep iTunes Media Folder Organized and Copy Files to iTunes Media Folder. This is how I have always kept my iTunes. These instructions are assuming that is also what you are doing.
Quit iTunes
Navigate to your Music Folder
Move all of the highlighted items in the photo below to a new folder on your desktop.
   4. Now launch iTunes. When it opens it will appear like the first time you opened iTunes because (duh) there is no media in it yet.
    5. Go into Preferences (advanced) and make sure your iTunes Media Folder is set correctly.
   6. Make sure that iTunes Match is turned off for now.
   7. Click File>Add to Library and then choose your iTunes Media Folder. You will then wait for a long time (most likely) while your media is rescanned.
The Fallout
At this point (if you organize your iTunes with precision like I do) you are going to find your iTunes Library with a little bit of disorganization (depending on how long the issue had been going on). Because iTunes had not been able to write to your ID3 tags many corrections you may have made over the past couple of months (however long the issue had been going on) will not be in effect. For me it wasn't so bad. I had about 200 songs & books that I needed to fix. Audiobooks seem to be more of a problem for me.
So go through and get your iTunes Library back to the way you like it. Then turn on iTunes Match (if you have it). The reason we had it off was to make sure that your match data didn't get replaced with your iTunes Library mistakes not re-fixed.
I have restarted my Mac many times and it has been about a day since I did this and everything appears to be working correctly.
Prevention
I wish I had something to write in this area but I have no clue how to prevent this from happening again. If I figure out a way I will be sure to edit this article. I am open for suggestions!

Apple should provide a way to disable Gapless Playback.
For Albums I guess checking is not so bad, though I prefer GP only to work when asked.
However, there is a major bug.
I record my own music which results in a single file with no Tags or references of any kind.
When I one of these files to "Add to iTunes Library" I get the spinning wheel while iTunes
tries to figure out if it is Gapless. This usually freezes up iTunes for about 15 minutes.
Please Apple. Just give us a way to turn off Gapless Playback.
I have my iTunes library on an external RAID drive, using a MacBook Pro.

ITunes 7.5 - major bug with playing cds! ?

when i play cds and deselect tracks, i often get spinning wheels that freeze itunes and make me force quit. it happens with both cd drives, and with a dozen different cds, all brand new.
this only happens with 7.5. if i use 7.4.2, it never ever happens. and it never happened with any itunes version before 7.5. it also happened with 10.4.8 and itunes 7.5 before i upgraded to 10.4.11.
the thing is, it only seems to happen right when i deselect the track on a cd, and usually at the very end of the track. this is quite unusual, but i've got it to reproduce very consistently.
try unchecking say, tracks 1-3 on a cd, then on track 4, uncheck it as it's playing at the last few seconds of the track, like at 2 seconds left. if it doesnt happen, re-select it and try again, and if not then leave it unchecked and try the same thing on track 5.
i cant use 7.5 b/c of this bug.
thanks

ha, yeah i see that - thank you! yours sounds like the same problem. i cant believe nobody else posted about this. it happens on every cd! and apple tech support today said they had no knowledge of this problem. the itunes techie couldnt test it out on his end b/c he said they are prohibited from having cds at work. this is insane considering that playing cds is a major function of itunes, so how is itunes tech support supposed to diagnose cd related problems when they dont have any cds!!? jeez

ITunes 11 is a bag of hurt in Snow Leopard (multiple bugs) - Fixes? Workarounds?

iTunes 11 is a bag of hurt in Snow Leopard (multiple bugs) - Fixes? Workarounds?
I had been using iTunes 11.0.2 in Snow Leopard 10.6.8 on early 2011 Mac Book Pro. When I went to iTunes store on August 1, it would no longer display the iTunes store, it shows just a blank white screen. Upgrading to the current iTunes 11.0.4 does not help, I still get white screens when I try to go to the iTunes store. If I run iTunes 11.0.2 on a different Lion machine it displays the store just fine.
Before this crippling issue began, I was having two other problems with iTunes 11.
1) When I was able and did view app descriptions in the iTunes store, I would try to click on the links for reviews, or related apps, etc, and none of the links worked. This problems also does not occur in Lion.
2) Also, I really do not like the new app sync buttons, "Remove", "Will Remove", "Update", "Will Update". Sometimes iTunes becomes confused on the state of an app, especially when I sync two devices to have the same apps on each. Also, when I have many apps, its a pain to find and click all the "Update" buttons to make them say "Will Update" as I have to read the buttons closely. There should at least be a way to sort the apps by status so I can see all the ones that say "Update" together.
I am on Snow Leopard because I have some Mac apps that still require Rosetta and I do not wish to upgrade. However, it seems that even though Apple says iTunes is compatible with Snow Leopard, they are doing a poor job of testing it in Snow Leopard.
Anyone else seeing these issues with iTunes 11 in Snow Leopard? Any Fixes? Or Workarounds?

tkoyn wrote:
2) Also, I really do not like the new app sync buttons, "Remove", "Will Remove", "Update", "Will Update". Sometimes iTunes becomes confused on the state of an app, especially when I sync two devices to have the same apps on each. Also, when I have many apps, its a pain to find and click all the "Update" buttons to make them say "Will Update" as I have to read the buttons closely. There should at least be a way to sort the apps by status so I can see all the ones that say "Update" together.
You are simply not understanding how app updating works in iTunes 11. Apple has changed it up a bit. When viewing your apps in iTunes, along the top, directly under the LED display click the "updates" tab. This will show you all the apps that have available updates. Then click the "update" button in the lower right of the screen.
tkoyn wrote:
1) When I was able and did view app descriptions in the iTunes store, I would try to click on the links for reviews, or related apps, etc, and none of the links worked. This problems also does not occur in Lion.
This is generally a network issue. As a first trouble shooting step, restart your computer. If that does not work power cycling the internet modem will generally clear up the problem.

Apple Released iOS 7.1 with Major AirPlay Bug Fix

Apple released iOS 7.1 with interface refinements, bug fixes, improvements and new features on Monday. But has the Airplay bug been fixed?
During the test of X-Mirage, we have found that AirPlay on iOS 7 is not as stable as on iOS 6 and we have reported a serious bug to Apple:
iOS 7 BUG – The devices stop sending mirroring data to Apple TV or X-Mirage one minute after iOS devices auto-locks
https://discussions.apple.com/thread/5468657
After using the iOS 7.1 today, we find that Apple has fixed the bug and AirPlay is more stable than before, so our distinguished X-Mirage users, you can update to iOS 7.1 freely and enjoy more fantastic AirPlay Mirroring and Streaming services. Getting the update is easy. Go to Settings. Select General. And tap Software Update.

thanks for the information?

ITunes 7.5 Massive Bug

Today I upgraded my iTunes 7.3 to 7.5. Yesterday everything was fine...but now whenever I try to open iTunes...it just hangs! And I've to end that program from 'Task manager'. I'm using Windows XP Sp2. I tried several uninstallation and reinstallation...but nothing seems to work! Even when I tried to roll back to 7.3...it says it can't read my library as that iTunes library was made by a newer version of iTunes (i.e. 7.5). Please help guys...looks like a major bug to be fixed in **** iTunes !

This might actually be an issue with your firewall and/or anti-virus software. I'm using 7.5 and don't have any issues with it, and I'm also on XP SP2. Did you try closing your firewall and/or anti-virus programs before opening iTunes? You might find that another program was interfering because it thought 7.5 was a new unauthorized program - I think this might esp be true for Norton users.
However, if you want to go back to 7.3 I can help you restore your old library:
1. Uninstall 7.5 and reinstall 7.3 but don't try to open it yet.
2. Go to My Music>iTunes>Previous iTunes Libraries. You should see a file called 'iTunes Library 2007-11-11' (or dated whenever you upgraded). Copy this file into the 'iTunes' folder in your 'My Music' folder.
3. Open the iTunes folder and move the 'iTunes Library.itl' file onto your desktop. Rename the file you just copied to 'iTunes Library.itl'.
4. Open the 7.3 version - it should look just like it did before!
If this worked you can delete the 'iTunes Library.itl' you moved onto the desktop; if it didn't you'll need to close iTunes, move that file back into the iTunes folder and go back to trying something else with 7.5. The only reason it might not work is because you've reinstalled several times.

OIM 11g R2 PS1 - Bugs fixed info required

Hi ,
I have OIM 11g R2 with BP 06 installed on my system and want upgrade to latest version so that majority of bug fixes are incorporated. As both BP07 and PS1 are in market.
While checking for BP7 fixes we noticed that there are certain fixes that we really require in our application like:
Bug:16315001 : GTC mapping image on migration to other environment is not displayed.
Bug:16506870 : De-provisioning of user accounts via the Set User De-provisioned Date scheduled job fails.
Bug:16347855 : Users are able to submit a request for modify account although nothing is modified on the form fields.
But while checking for release notes of PS1 (11.1.2.1) i did not notice any such fixes, rather there were some certification exception fixes ,new menu called "Certification" in Sysadmin Console and Introduced new menu called "Inbox" in Identity/Self Service Console
So my question is that to apply above fixes we need install the BP7 patch separately, considering PS1 is not a cumulative one and then install PS1
Thanks,
Puneet

Hi,
Check out: http://www.iamidm.com/2013/05/oim-11g-r2-ps1-certification-tab-in.html
Regards,
Chinni

Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps.

Hi. Whenever I go through one of the menus in firefox, the links remain highlighted after my mouse passes over them. Is there a bug fix for this or is there something wrong with my computer? I am running windows 7 if that helps. This problem started ever since I upgraded to version 5.

I have downloaded and used the iPod Reset Utility, alot that did. My current state is iTunes on my XP Home with SP3 sees the iPod. When I drag a song to the iPod, the Sync message appears for about 5 minutes, then the Apple symbol appears. But no song has been transferred to the iPod.
I tried to tap into the XP iTunes database from my iBook, but although it acted like it would add the XP library to the iBook library, it did not. I've got 19 Gs of songs on the XP. If I have to load each song from its original CD to get it on my iBook I'm going to start looking for some other app or device so that I can listen to my music.
It is a shame, in the old days, Apple techs use to look at what was going on, now it appears they don't, so they never know they have problems until Apple's profits fall.

Major "BUG" in Imovie 9 - Audio Sync Problem on Export !

Well I'm a hard-core Apple user from day one, but unfortunately today I'm not to proud about the latest version of Imovie 9.
It seems there has been a "MAJOR audio sync problem on export" in Imovie 9, since July 2009. Apple knows about this bug for a long time now, but didn't release any bugfix yet!
Here's what it's all about:
It seems if you use the (custom /manual) speed-adjustments and not the preset slider speeds, you will experience (after exporting your movie) annoying bursts of audio from clips that had been set to mude. The strange thing is that you will only experience this audio-bug after exporting, you will NOT experience it in the project playback mode!
Here's what you can do:
Find ALL the clips in your Project that are Speed Adjusted.
Instead of using a "Custom Speed" percentage, use any of the "Preset Speeds"
Preset Speeds on the Slider = 12.5%, 25%, 50%, 100%, 200%, 400%, 800%
Then, export your project as usual.
No more sync issues.
Really hope That Apple will come up with a real BUGFIX soon.
It's a shame that a major bug in a otherwise GREAT PRODUCT, hasen't been fixed yet!
What's wrong with Apple?...this is not one of their finest hours.
Still A BIG fan from Imovie HD,...I'll chance to Imovie 9 when the bugs are finaly fixed!

This is TERRIBLE! I have spent so much time working on this project, and I really don't want to adjust the speed settings to the preset levels, BECAUSE I need to motion of the video to match certain musical points. I can't re-film my video, and I needed this project done TODAY. I made a music video with some kids at summer camp, and today is the last day- the day we were supposed to all watch it together, and now, I've got NOTHING!!!! (Because I can't export it without all those glitches!)
I am MAJORLY DISAPPOINTED on this one. I've made movies in windows movie maker before, and purposely used imovie, because you know, everything on macs is supposed to be better. Well, I guess I was wrong.

Outlook 2003 Calendar syncing bug fixed!

Since Apple has refused to acknowledge this major bug in Itunes 7.7 - iPod Touch 2.0, I decided to solve the problem myself.
As you all know. The new Apple software and firmware upgrades have destroyed the syncing of Outlook Calendars with both the iPhone and iPod. Syncing calendars doesn't work anymore.
I use my iPod Touch/Outlook Calendars everyday for my work. I need my calendars to be in sync always.
Here is what I am doing to solve the problem - and it seems to work. Test it yourself.
1. Open Outlook 2003 or 2007.
2. Go to the Calendar tab.
3. Find a Calendar appointment or event that is not syncing correctly with your iPod Touch.
4. Make note of the details of the appointment - date, duration, recurring etc.
5. Write these details on a scrap of paper.
6. Store the paper in your wallet.
I joke - but I'm getting mad.

As much as I love my iPod Touch, this problem syncing with Outlook 2003 -- and the failure of Apple to acknowledge it (at least there's nothing I've seen so far) -- has me ready to toss it out my office window. It all seems so random: Sometimes it's fine and the sync woriks, sometimes it's producing multiple versions of an appointment, and sometimes the appointment gets deleted from Outlook, the iPod or both. Looks like I actually do need a paper backup!! This is the second time that updating my iPod Touch has resulted in a major slip in functionality. The last time I was told that by an insider that Apple engineers dislike having to work out bugs with Windows, that they don't like Windows. Are we being punished? This is seriously annoying.

Does Oracle XE 10g or 11g have supported patches/bug fixes

Does Oracle XE 10g or 11g have supported patches/bug fixes?

XE isn't patch-able, unfortunately- eg. in the section ...Major Features Not Included at http://docs.oracle.com/cd/E17781_01/license.112/e18068/toc.htm#XELIC116 a "patch set" is one of the "not included" items
One could install one of the full release editions, get it patched, and upgrade an XE instance with the patch-able edition, but access to patches requires a support agreement.

Home view major bug: Home view navigation not available in Common File Dialog Box (i.e. Java, Adobe Photoshop etc)

Homeview major bug: Homeview navigation not available in Common File Dialog Box (i.e. Java, Adobe Photoshop etc)
Hi
All though provisioning somewhat more flexsible and pointing forward ... things are starting to go wrong here ... i.e. pointing to a very potential lack of success introducing users to the new Home namespace/concept ...
0) Situation if you do not fix 1 + 2:
You can not release the Homeview feature like this - without fixing 1 + 2.
If not 1 +2 is fixed you might just as well leave the release of the Homeview feature out of the roadmap for Windows 10. I.e. not ready for use ... or promotion in the UI
1) How come Homeview has not been included - like other namespaces i.e. Libraries into the Common File Dialog Box?
How can such a trivial thing to do be missed? I.e. like forgetting to include Homeview into Explorer (would be absurd).
If not included into the Places Bar of the Common File Dialog Box ... Home View will be unusable - because some very visible applications like Java, Photoshop will not be able to navigate that space easily at all.
2) Finally, please fix obscure situation in the UI namespace in Explorer
Please fix obscures like having Home view, Favorites and Libraries (side-by-side complexity and confusion obscuring usability) - all similar concepts but on a different evolutionary step. I.e. have Favorites and Libraries
hidden - and add i.e. view control like to small buttons whatever to unhide/show the legacy concepts.
In any case - Home view already seem to migrate/move links from Favorites to the Homeview container.
Additionally, Home view should migrate links from Libraries to Home view - and provide similar and better functionality.
Thus going the evolutionary way from Libraries > Favorites > Home - with the later concept of Home providing links to the cloud. Even better, sync relation ships could then later (extended features for Home) be set up among the pins - i.e. concerning
cloud/network syncing.
The UI should always reflect the 1 essentional concept - and not under the hood technologies or different evolutionary stages of the same basic/essential concept (technology/implementation free - abstract: "Home with pining of user data space"
- was previously favorites or libraries (thus obsoleted)). Now the name for that concept is Home. Have it include the technology that replaces Libraries too - i.e. categorization/nesting ... and some whitespace inbetween the nesting (alike some whitespace
already there inbetween the namespaces in the Explorer UI ... provides easy "modular" reading)

Hi,
Please clarify the following:
* "X: is a network drive, but it's actually a network drive on my machine." - Is "X" a mapped drive to one of your shared folder on network?
* What is the project directory structure with respect to WEB-INF/web.xml? Are you able to see the three pages (from web & pages folder) in NitroX Editor?
* Does the modified content appear in "Design view" of index.jsp upon restarting NitroX?
Ex:
- modify one of the pages in "web" folder > save the file (alert appears)
- restart NitroX, does index.jsp display the modified content of included page?
* If possible please send the test case project which exhibits the behavior to [email protected]
Thanks,
M7 Support

Bug Fix Lament

Adobe: It does not bode well for Lightroom to have relatively-easy-to-fix bugs persist, release after release.
I highly recommend finding a way to get more of them out between releases.
In my opinion, one should almost be able to assume certain bugs are not there since they were reported well in advance of latest release - just like we can assume certain popular new cameras will be supported...
If I remember correctly, there was precisely one item on the "known issues" list of the 3.3 release - hiding them does not make them go away.
Rob

Lightroom 3.3 Bugs Fixed below (these are probably the major bugs, and there may be many more minor ones not listed). It would seem that they weren't exactly sitting on their hands.
Bug fixing is about priority and risk. If a bug fix has a high risk of creating other bugs and a low priority because of few users affected or easy workarounds, then it might be better to leave it alone. It's also possible that bugs that seem easy to fix actually require a near entire rewrite of entire sections of code.
Edit in PS CS4 from LR 3.2 did not give option to render to TIFF/PSD
Process Version defaulted to PV 2003 when Lightroom’s installed Develop Presets are applied on Import
All Auto-ISO values were not properly handled for the Nikon D3s
An error could be generated when sorting by “User Order” in Collections
There was an incorrect Profile Name tag for Canon 18-55 and 17-40 lens profiles
Facebook album selection only displayed up to 25 albums
Lightroom 3 could fail to launch Photoshop CS5 if Photoshop CS4 was uninstalled after the Photoshop CS5 installation
Numerous cloning or healing spots could have caused Lightroom to become unresponsive
Lightroom could have crashed when the metadata filter is selected and the grid is displaying all images in the catalog
Lightroom 3.2 could have failed to import all of the images from an iPhone 4
Some Sigma X3F raw files were rendering incorrectly
Choosing the “Make a second copy to” option on import would result in incorrect folder structure for the second copy
Resetting the crop angle by double-clicking the Angle slider removed a custom aspect ratio
A tooltip for the Japanese language version of Lightroom 3 displayed the wrong keyboard shortcut for “Flag as Pick”
Paste Settings did not apply to all images in the Develop module Filmstrip
Smart collections in Lightroom 3 did not use the same definition of “All Searchable Metadata” previously available in Lightroom 2
Text watermarks or portions of text watermarks could have failed to be applied to images on export
SmugMug publish collection dialog included a mixture of English text when using a language setting other than English
Lightroom would not import files from the Panasonic LX5 that were shot with the iZoom Function set to above 90mm
Choosing the Limit File Size option in the export dialog could have stripped certain EXIF fields from the exported file
The Targeted Adjustment Tool may have performed slowly in the Lightroom 3.3 release candidate
A single image published to multiple collections for a single publish service did not display comments properly
Updating an existing Develop preset with all settings could have failed under certain conditions
The watermark drop shadow settings behaved differently in Lightroom 3.2 when compared to Lightroom 3.0. They have been returned to the Lightroom 3.0 behavior.
The YYYYMMDD file renaming option was not available when the Lightroom language setting was set to Dutch
An existing Smart Collection updated to filter for all photos with “Ratings is Zero” would show all images in the catalog
Publishing an empty category to SmugMug would cause an error
JPEG exports in the Lightroom 3.3 Release Candidate were significantly slower than the same export process in Lightroom 3.2.
A graphical Identity Plate included in output was not correctly color managed
Deleting all images in a Flickr photoset could have caused Lightroom to return an error message
Changing the sort order to “User Order” while in Survey View on the Mac may have caused an error to appear
Lightroom could have failed to respond when viewing an image containing numerous cloning or healing spots at 1:1 view
RGB values were not displaying properly in the white balance tool
The Smart Collection criteria “Folder starts with” was not working properly
The navigator panel in the Develop module would incorrectly display threshold information when holding down the alt or option key and applying adjustments
Applying a flag, star or label setting to an image via the toolbar in the Develop module while in auto-advance mode would result in an incorrect setting display for the subsequent image
The application of color noise reduction at low color temperatures (e.g., tungsten or candlelight) could have provided results below our quality standards

Bug fix for missing files error msg

from what i can tell there is still no bug fix for this issue that way too many people are getting.
why has nobody from Apple posted on this board discussing their plans for this issue?
why is this issue not noted on the tech support home page?
my bet is 95% of the people who are also getting this error don't use this message board and therefore are really clueless...

*from what i can tell there is still no bug fix for this issue that way too many people are getting.*
WHat bug/eror are you talingk about?
*why has nobody from Apple posted on this board discussing their plans for this issue?*
This is a user-to-user forum.
Besides, what good would it do if Apple posted, "we are working on it"?
Most likely, any problems with iTunes are being looked at.
why is this issue not noted on the tech support home page?
What issue? Maybe it's not a big enough problem to make a big deal out of.
my bet is 95% of the people who are also getting this error don't use this message board
If that's the case, why should Apple post something?

When will apple release an update with bug fixes for ios 6?

when will apple release an update with bug fixes for ios 6?

When indeed. I purchased iPhone 5 64gb and have so far experienced the following issues/Bugs
1. Flash on camera out of sync
2. Cannot connect to some WIFI Bluetooth drvices
3. Missing Album Artwork on iTunes album view
4. Buggy and confused maps/satnav
5. iMessage comes and goes
6. Battery Life *****

ITunes 10.1 Major bug fix?

Similar Messages

Maybe you are looking for