Itunes 10.1 will not install and Rollback v8.2 will not recognise my Ipod!

Hi,
I recently updates to itunes 10 (running nano 4th gen) and since then my computer has become a constant error message and my ipod has become a paper weight.
Whilst installing I10 I get error messages saying could not open Key unknown\components\DA42BC89BF25F5BD0AF18C3B9B1AEE8 verify that you have sufficient access to that key.
I searched through the support forum and did everything that was advised to confirm access etc. I tried to reinstall but got the same message again followed by "Apple application support not found" and then "the program can't start because core foundation.dll is missing from your computer".
Again searched the message boards and tried everything suggested but with no luck.
Ok i said to myself - I need to rollback.
I managed to install itunes V8.2.1.6
When i go to open it i get 2 messages come up that state "The program cant start becuase ASL.dll is missing from your computer" If i click ok on both message and then try to open itunes again it will open. PHEWWWWW.
However, Now I cannot sync my ipod.
Itunes will recognise it, if I try to do a restore I get the message "The ipod could not be restored, An unknown error occured (1436)"
The only help I can find for this is to update to the latest itunes (which I cannot for tech issues).
I have done a reset on the ipod both hard and soft but no luck.
The support I received from apple was basically a message saying that the support they offered didn't cover these issues!!!!!!!
Is there anything that can be done to sort this mess out or should I just consign my ipod to becoming a paper weight.
Any and all suggestions welcome.
Thanks in advance

try the procedure suggested in [this|http://discussions.apple.com/thread.jspa?messageID=12581713&#12581713] thread.
JGG

Similar Messages

I have installed latest update for itunes but it will not install and I receive a message Apple Mobile device failed to start. I have uninstalled and reinstalled itunes but have the same problem. I am using windows 7 and internet explorer

I have downloaded the latest Itunes update, but it will not install and I receive a message 'apple mobile device failed to start'. I have uninstalled and reinstalled itunes but still have the same problem!

Hi there willjay3976,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

Windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

Hi Tamekia,
I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
Level-three uninstall, and register the Windows Installer Service
Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HT1349 I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and wont let me run itunes help me fix it.

I don't have a MAC, I have a PC and itunes will not run because I had an update and now it says msvcr80.dll isn't working or not installed and won't me install or run itunes anymore help me fix it.

MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

ITunes will not install. It says I do not have authorization to make changes on the computer. I am the administrator.

iTunes will not install. It says I do not have authorization to make changes on the computer. I am the administrator.

What's the precise text of that error message please? (There's a few different ones I can think of that you might be getting.)

I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.

Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
Final Cut Studio 2 (Including Final Cut Pro 6)
• A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
• 1GB of RAM
• An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
• A display with 1024-by-768 resolution or higher
• Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
• QuickTime 7.1.6 or later
Additional Recommendations
• 2GB of RAM when working with compressed HD and uncompressed SD sources
• 4GB of RAM when working with uncompressed HD sources
• A display with 1280 x 1024 resolution or higher
Additional Requirements for Motion
• A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
• A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
• For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
Additional Requirements for Color
• The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
• ATI Mobility Radeon X1600
• ATI Radeon X1600
• NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
• For 32-bit rendering: a graphics card with at least 256MB of VRAM.
• A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
• A three-button mouse for full functionality
Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535

Itune was not installed and i defaulted to pictures to open iphone how do i change default to itune or nothing?

Itune was not installed and i defaulted to pictures to open iphone 5s in windows 8, how do i change default to itune or nothing?

You need to try and explain your problem again. I'm not exactly sure what you are trying to describe the problem as. What do you mean you defaulted pictures to open phone? What default are you referring to here?
You can import pictures from the Camera Roll of the iPhone to the computer, and you can sync pictures from the computer to the iPhone using iTunes, but I don't know what you mean when you say defaulted pictures.

After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

Sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain

sign in to itunes store will not disappear and the whole IPad will not let me go into other screens till this pop up goes away. I have entered the password several times and still will not disappear. Turned the IPad on and off but the pop up remain

FIrst try a soft reset by holding down the home & sleep/wake buttons until the Apple logo appears then let go & let the iPad boot up normally.
If that doesn't help then to make sure you have a strong internet connection.
Try resetting Network Settings
Settings->General->Reset->Reset Network Settings,
You won't lose any data but will have to log back into your wifi networks.
Once logged back in and when the pop-up appears, try entering your password again.

I have installed uninstalled and reinstalled itunes but am unable to activate...receiving message that MSVCR80.dll is not installed and error 7 (windows error126) is a problem. Any takers?

I have installed, uninstalled and reinstalled itunes 11 but have been unable to activate the program. I keep receiving the message that MSVCER80.dll is not installed, and error 7 (windows error126 is a problem). Any takers?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Flash player will not install and shockwave is enabled, what do I do?

Flash player will not install and shockwave is enabled what do I do.

You start by posting your operating system and browser here in a reply.
That way we know where to begin.

I deactivated photoshop CS4 so I could reinstall on windows 8.1. Now it will not install and errors

I deactivated photoshop CS4 (one of many times) to reinstall on windows 8.1. It errors with a message that it could not install and advised I contact support. I also tried to install on my laptop with the same results.

use compatibility mode to install.

I was trying to update my garageband app and once the app fully downloads it says that it could not install and to check my internet connection. I restarted my internet, turned it off and on, restarted my computer, and nothing works what do i do

I was trying to update my garageband app and once the app fully downloads it says that it could not install and to check my internet connection. I restarted my internet, turned it off and on, restarted my computer, deleted the app and downloaded it again and the same thing happened every time. What should I do?

Do you have any firewalls or antivirus software active (e.g. Little Snitch), that could prevent the installer from contacting the Apple Servers? If yes, turn them off. Also, disable the Energy saver, to prevent the Mac from falling asleep and causing time outs.
Sometimes it will help, to run the installer in Safe Mode, see: Mac OS X: What is Safe Boot, Safe Mode?

Itunes 10.1 will not install and Rollback v8.2 will not recognise my Ipod!

Similar Messages

Maybe you are looking for