ITunes 10.2.1(1) runs slowly when left running for extended time

iTunes on my Mac runs slowly the longer it is left up. I have two AppleTV's (ver 2), and if iTunes has been up for more than a day, it can take minutes for the list of movies/tv shows to appear on the AppleTV. Likewise, iTunes itself becomes very sluggish, unable to access the iTunes store or sync ipod/iphones.

it was a plugin i had that was causeing it: DockArtPlugin.bundle

Similar Messages

  • Why would my i7 Quad-core with 20 GB RAM run slowly when using PE12 for Mac

    Hi, I am evaluating the trial version of PSE 12 for Mac but it is so slow. Are there any good reasons for this as all other programs run fine.

    I don't know if you can do this with the trial, but try going to editor>help>updates and running the update to 12.1. It greatly improves performance on the mac.

  • Firefox shows a black screen suddenly while browsing or when left idle for long time (more than 1 hr).

    Firefox suddenly turns totally black while I was browsing yesterday. I tried restarted it, and it works fine. In such state none of the menu or actions items are accessible. Even while closing the browser I get the confirmation popup which is also completely black.
    Screenshot link: http://prntscr.com/55kggq
    I had to randomly click on the "close tabs" button.
    I am using Mozilla Firefox v33.1 in Windows 7, 32 Bit OS with i3 processor, 4GB RAM.

    ''nescafe2002 [[#answer-663423|said]]''
    <blockquote>
    I've just had the same issue (sudden black screen while browsing), probably related to my graphics card driver which I've updated two days ago.
    Laptop model: ASUS N550JV CN270H
    Graphics card model: Intel(R) HD Graphics 4600
    Old driver: 10.18.10.3308 (2013-09-16)
    New driver: 10.18.10.3960 (2014-09-29)
    If the problems recurs, I will re-install the 10.18.10.3308 driver and post the results here.
    </blockquote>
    After 3 more blackouts, I restored 10.18.10.3308 and the problem went away.

  • Hello, I have a problem, my macbook pro runs slowly when unplugged but if I plugged it, it runs perfectly.

    Hello, I have a problem, my macbook pro runs slowly when unplugged but if I plugged it, it runs perfectly.

    The battery needs to be replaced, or there is some other hardware problem.

  • Why my mac book running slowly when i see the movie online?

    why my mac book running slowly when i see the movie online?
    Many time i hv seen tht whn i start it n in few mins it shows me the colored corsor as its working hard....

    Go to System Preferences > Displays > use the underscan slider to adjust picture size on the TV.

  • My MacBook Pro is running slowly. I run Mountain Lion on it.  I received the following report from Etrecheck.  Can someone help me decipher it and provide me with steps to fix the slow speed?

    My MacBook Pro is running slowly. I run Mountain Lion on it.  I received the following report from Etrecheck.  Can someone help me decipher it and provide me with steps to fix the slow speed?
    Problem description:
    slow computer
    EtreCheck version: 2.0.11 (98)
    Report generated November 15, 2014 2:57:16 PM EST
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,1
      1 2.3 GHz Intel Core i7 CPU: 4-core
      4 GB RAM
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 - VRAM: 384 MB
      NVIDIA GeForce GT 650M - VRAM: 512 MB
      Color LCD 1440 x 900
    System Software: ℹ️
      OS X 10.8.5 (12F45) - Uptime: 6 days 7:45:47
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      disk0s1 (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (25.67 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Rowmote Helper.app
      [loaded] com.regularrateandrhythm.driver.RowmoteIREmu (1.0 - SDK 10.8) Support
      /System/Library/Extensions
      [not loaded] com.smarttech.iokit.SMARTBoard (11) Support
      [not loaded] com.tectona.driver.PL2303 (1.3.0) Support
      [loaded] com.webroot.driver.WebrootSecureAnywhere (54 - SDK 10.7) Support
    Problem System Launch Agents: ℹ️
      [failed] com.apple.accountsd.plist
      [failed] com.apple.AirPlayUIAgent.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.lookupd.plist
      [failed] com.apple.printtool.agent.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.coresymbolicationd.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.smarttech.boardservice.plist Support
      [running] com.smarttech.floatingtools.plist Support
      [running] com.smarttech.ink.plist Support
      [running] com.smarttech.SBWDKService.plist Support
      [running] com.smarttech.smartnotification.plist Support
      [running] com.smarttech.systemtrayicon.plist Support
      [running] com.webroot.WRMacApp.plist Support
      [running] com.webroot.WRMacBackNSync.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [running] com.regularrateandrhythm.rowmotehelperaide.plist Support
      [running] com.webroot.security.mac.plist Support
      [running] com.webroot.webfilter.mac.plist Support
    User Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [running] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      Garmin Express Service UNKNOWN (missing value)
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox Application (/Applications/Dropbox.app)
      Spotify Application (/Applications/Spotify.app)
      Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
      Rowmote Helper Application (/Applications/Rowmote Helper.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      npwebroot: Version: 2.0.15 Support
      AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.1
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
      Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 51 Check version
    Safari Extensions: ℹ️
      Password Manager
      webfilter
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      SMART Board  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          3% WindowServer
          2% iPhoto
          2% mds
          2% mdworker
          1% Google Chrome
    Top Processes by Memory: ℹ️
      382 MB Mail
      275 MB WebProcess
      107 MB Google Chrome
      103 MB WindowServer
      99 MB Google Chrome Helper
    Virtual Memory Information: ℹ️
      270 MB Free RAM
      1.50 GB Active RAM
      1.30 GB Inactive RAM
      1.22 GB Wired RAM
      20.97 GB Page-ins
      8.64 GB Page-outs

    Hi Linc
    I hope this is what you were after.  Looking forward to hearing your feedback.
    Thanks, Susanna.
    11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: FontHelper:  message received. (<dictionary: 0x7fbb9b606ce0> { count = 2, contents =
      "query" => <string: 0x7fbb9b605720> { length = 109, contents = "com_apple_ats_name_postscript == "Roboto-Regular" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
      "restricted" => <bool: 0x7fff7912f320>: true
    11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: FontHelper:  message received. (<dictionary: 0x7fbb9a41d950> { count = 2, contents =
      "query" => <string: 0x7fbb9a41d2e0> { length = 108, contents = "com_apple_ats_name_postscript == "Roboto-Medium" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
      "restricted" => <bool: 0x7fff7912f320>: true
    11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: FontHelper:  message received. (<dictionary: 0x7fbb9b102580> { count = 2, contents =
      "query" => <string: 0x7fbb9b100580> { length = 107, contents = "com_apple_ats_name_postscript == "Roboto-Light" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
      "restricted" => <bool: 0x7fff7912f320>: true
    11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: FontHelper:  message received. (<dictionary: 0x7fbb9a41d1d0> { count = 2, contents =
      "query" => <string: 0x7fbb9a41d2e0> { length = 106, contents = "com_apple_ats_name_postscript == "Roboto-Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
      "restricted" => <bool: 0x7fff7912f320>: true
    11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: AutoActivation:  scopes (
        "/Library/Application Support/Apple/Fonts"
    11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91723 [cfprefsd]
    11/16/14 12:36:03.784 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91721]) Exited: Killed: 9
    11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91721 [SleepServicesD]
    11/16/14 12:36:08.471 PM com.apple.launchd.peruser.501[159]: (com.apple.tccd[91730]) Exited: Killed: 9
    11/16/14 12:36:08.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91730 [tccd]
    11/16/14 12:36:09.592 PM com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[91727]) Exited: Killed: 9
    11/16/14 12:36:09.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91727 [xpcd]
    11/16/14 12:36:13.129 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[91728]) Exited: Killed: 9
    11/16/14 12:36:13.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91728 [XType.FontHelper]
    11/16/14 12:36:14.996 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91739]) Exited: Killed: 9
    11/16/14 12:36:14.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91739 [SleepServicesD]
    11/16/14 12:36:20.120 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[76618]) Exited: Killed: 9
    11/16/14 12:36:20.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76618 [cfprefsd]
    11/16/14 12:36:23.433 PM com.apple.launchd.peruser.501[159]: (com.apple.cfprefsd.xpc.agent[76616]) Exited: Killed: 9
    11/16/14 12:36:23.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76616 [cfprefsd]
    11/16/14 12:36:26.261 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91752]) Exited: Killed: 9
    11/16/14 12:36:26.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91752 [SleepServicesD]
    11/16/14 12:36:37.691 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91764]) Exited: Killed: 9
    11/16/14 12:36:38.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91764 [SleepServicesD]
    11/16/14 12:36:48.938 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91777]) Exited: Killed: 9
    11/16/14 12:36:49.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91777 [SleepServicesD]
    11/16/14 12:37:01.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91788 [SleepServicesD]
    11/16/14 12:37:00.821 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91788]) Exited: Killed: 9
    11/16/14 12:37:04.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91706 [distnoted]
    11/16/14 12:37:15.656 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91795]) Exited: Killed: 9
    11/16/14 12:37:15.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91795 [SleepServicesD]
    11/16/14 12:37:27.016 PM ReportCrash[91819]: Failed to create CSSymbolicatorRef for Webroot SecureAnywhere[264]
    11/16/14 12:37:27.125 PM ReportCrash[91819]: Failed to create dSYM-less CSSymbolicatorRef for Webroot SecureAnywhere[264]
    11/16/14 12:37:27.487 PM com.apple.launchd.peruser.501[159]: (com.webroot.WRMacApp[264]) Job appears to have crashed: Segmentation fault: 11
    11/16/14 12:37:30.336 PM com.apple.launchd[1]: (WSDaemon[61]) Exited abnormally: Broken pipe: 13
    11/16/14 12:37:34.295 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
    11/16/14 12:37:34.594 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.30 seconds (server forcibly re-enabled them after 1.00 seconds)
    11/16/14 12:37:37.648 PM ReportCrash[91819]: Saved crash report for Webroot SecureAnywhere[264] version 8.0.7.78 (8.0.7.78) to /Users/landerson/Library/Logs/DiagnosticReports/Webroot SecureAnywhere_2014-11-16-123737_lukes-MacBook-Pro.crash
    11/16/14 12:37:42.660 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
    11/16/14 12:37:43.632 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.97 seconds (server forcibly re-enabled them after 1.00 seconds)
    11/16/14 12:37:50.783 PM WSDaemon[91822]: CGSRegisterConnectionNotifyProc called with invalid connection
    11/16/14 12:38:09.909 PM Problem Reporter[91853]: launch_msg returned m

  • TS3297 Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?!(for 1st time purchase)

    Does anyone know how to reset your security questions?? I loaded an itunes gift card on new ipod but when trying to make a purchase, itunes is asking us the incorrect security questions?! (for 1st time purchase)  I know the questions are not what I chose because I wrote the questions & answers down when setting up the ipod. Any ideas??!!!

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
      1. Go to: Apple Express Lane;
      2. Under Product Categories choose iTunes;
      3. Then choose iTunes Store;
      4. Then choose Account Management;
      5. Now choose iTunes Store Security and answer the bullet questions, then click
          Continue;
      6. Sign in with your Apple ID and press Continue;
      7. Under Contact Options fill out the information and advise iTunes that you would
          like your security/challenge questions reset;
      8. Click Send/Continue.
    You should get a response within 24 hours by email.
    In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
      a. on the device that is asking you for the security questions go to "settings", > "store" >
          tap the Apple ID and choose view"Apple ID" and sign in.
      b. Tap on payment information and add a credit/debit card of your preference then select
          "done", in the upper right corner
      c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
          Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
          should be asked to verify your security code for the credit /debit card and NOT the
          security questions.
      d. At this time you can remove the card by going back in to edit the payment info and
          selecting "none" as the card type then saving the changes by selecting "done". You
          should now be able to use your iTunes store credit without answering the security
          questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • MacBook Pro duty cycle - can it be run at full CPU for extended time?

    Hello,
    I'm wondering if anyone knows Apple's stance on the duty-cycle of the MacBook Pro models. I'm should be receiving a MBP Core2Duo 2.16 GHz in a couple days.
    The reason I ask is that I currently have a PowerBook 1.33 GHz, and do a good deal of rendering of 3D computer graphics. On my PowerBook, when it is running under full load, the fan will come on for a while.. then turn off... then on for a while etc. It doesn't seem to have problems keeping the temp down unless the ambient temp of the room is high (say, above 80 F, 26C, which then is my fault and I need AC... lol, not computer design).
    I have had a few MacBook Pro units from work, and they work quite differently. The fan always runs... usually around 1k RPM, and then spools up to compensate for load. I have had two left fans go bad in 1.83 GHz Duo Core units (fairly early in production), and recently got a 2.33 GHz at work. I put it under full load tonight for a while, and the fans spun up to about 4k RPM (they seem to idle at 2k RPM). This kept the temp of the CPU to around 79 C... which is a bit higher than I like... but probably safe (and our room temp is fairly cool this time of year... about 70 F, 21 C).
    I'm wondering if it is safe to run a MBP like this for extended periods of time. I'm talking days here, 24x7... not just an hour or two. I have done this MANY times on my PowerBook G4 1.33... and it is probably like 3 years old or so now. Having those fans go out has just made me a bit gun shy I guess. Should I expect to be able to do this kind of thing with a 'Pro' laptop... or am I just running them too hard? Or, were there just a bad run of fans in the earlier MBPs?... it was always the left fan.
    -Steve

    Actually, I don't think 4,000 RPM is all that great,
    and the fans shouldn't have any trouble maintaining
    this speed indefinitely. 10k or more would be a
    different story.
    Of course, this is true only if the fans are designed
    (and built) properly. I can't speak to that.
    Yea, that's what I'm afraid of (fans not designed for that). It might be because I've actually witnessed a couple go bad... but I just don't think most of these tiny PC type fans can take it. Graphic card fans are notorious for going bad too. I'm less concerned with keeping the CPU temp down than I am with the high RPM on the fans actually.
    Regardless, you should be able to run your MBP "full
    bore" for as long as you like, and you needn't worry
    about it failing.
    I think you're correct... other than the fans. I'm guessing they will fail. If they did, the computer would probably just shut down. It probably wouldn't hurt anything, just need the fan replaced. But, I'd rather avoid that if I can. I suppose I could replace it myself to keep from having to send it away for a week or two.
    There is one thing, however, that
    most people do not consider, and which will help more
    than anything else (maybe even room temp): Keep the
    air around your MBP moving!
    Bingo! Great lead. I guess I knew this but didn't think of how big of difference it really would make. So, I did some experimenting.
    I brought up my trusty iStat Nano Dashboard widget so I could see the fan speed. Then I took a folder and fanned the computer for a couple minutes. Just this amount of air movement dropped the RPM from around 4600 (for some odd reason, my 2.16 runs at higher RPM than my 2.33, and keeps the CPU a couple degrees cooler) down to 2800. WOW!
    Then my arm got tired, and I went to get a rather powerful fan I could fit on my desk (one of Honeywell vortex type fans), and then it dropped to 2200 RPM. This fan is WAY to noisy, but my folder experiment demonstrated I don't need all that much air movement... just like you said.
    I think I'm going to go tomorrow and get either a couple of small fans, or maybe even some low noise computer fans and experiment with some ways of mounting them. I should be able to keep it down in the mid-2500 RPM range and still be quiet if I get the right setup.
    Also, I think you can safely disregard what your
    "overclocking" friends have to say. True, 100 C is
    quite hot, and would certainly be too hot for earlier
    processors. The Core Duo, however, is an entirely
    different beast, and Intel has designed it to run
    that hot. I think your friends are probably
    (inappropriately) applying specs for earlier
    processors to the Core Duo.
    I checked the Intel specs on the Core2Duo, and it has an operating max of 100 C. It some kind of actual hardware failure type shutdown at 120 C. So, I guess 80 C is hot, but 20 C under the max operating temp. I'm sure Apple designed it to keep that temp safe, so I guess they just vary the fans to keep it under 80 C the way it looks.
    Thanks much... that tip will solve my issue!
    -Steve

  • I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours.

    I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours. Don't have the lion disk... Drivers seem impossible to get. Please help!

    lan drivers*

  • TS1389 i'm not able to transfer files/download apps through itune. it keep asking me to authorization. i do this for many times....but why this asking me again and again.

    i'm not able to transfer files/download apps through itune. it keep asking me to authorization. i do this for many times....but why this asking me again and again.

    To avoid that I would recommend deleting the folder first the copying won't be an issue or deleting all the files in the directory. I know this is an extra step but just like the warning on plastic bags someone somewhere did something they shouldn't have
    Sorry, I have been there.
    So generally it will ask you if you want to do this for X number of files
    IT SHOULD ASK ONCE AND ONLY ONCE
    I SAY YES AND GO AWAY AND I HAVE TO COME BACK AND HIT YES AGAIN
    To avoid that I would recommend deleting the folder first the copying won't be an issue or deleting all the files in the directory. I know this is an extra step but just like the warning on plastic bags someone somewhere did something they shouldn't have
    ND LOSE AL THE RIGHTS...
    THIS IS BAD ADVICE!

  • Hp probook 4403s run slowly when copy data

    Why do my hp probook 4430s core i3-2330 with 4GB ram, 500GB HDD run slowly while copying data? (tested in win8-64bit, win 7-64 bit, win 7-32bit) My HDD is tested. It is in good condition, no bad sector. When i copy data (between logical drives or external drives), my laptop is running slowly and lad. It runs like a old computer with pentium 4 and ram 500MB. So, when i copy data, i do nothing and waiting it completed.. My old laptop with core2duo and ram 1GB give me both copying data and do another things like browse web easily?
    Please help me solving it.

    Hey mayouly,
    While "slow" is a subjective term, I want to give you some things to consider. You may already be aware of these things but I wanted to put the information out there, just in case. Over time, hard drives accumulate data and the more full they are, the more time it will take a to access data, in turn slowing down the copying process. Also as you use your computer, the services running in the background accumulate and can be set to run on start up without you being aware. To check what is running in the background,
    Bring up Task Manager (Ctrl + Shift + Esc) > Click on the Processes tab > Click on the Memory column to put in descending order. 
    This will put the heavier, resource-hogging processes at the top. Sometimes anti-viruses may have an updater service going, or another 3rd party program may have an updater service running without you knowing about it. Like I mentioned, these processes could be installed set by default to start up when you power on the computer, even if you don't open that program. For instance, after installing iTunes, the applepush (iTunes' updater service) will run every time you power on the computer. This is not the only program that sneaks these services in. Browser toolbars will sometimes do the same thing. You can also check to see what is starting up at power on by using msconfig.
    Click the Start button > Type "msconfig" > click "msconfig.exe" > Click the Start Up tab.
    Every thing that is checked must start at power on. There may be some unnecessary processes in that list which can simply be unchecked. You'll want to use caution though because something that may look unfamiliar might be a required driver for your computer, like audio or touchpad software. When you're done making changes, Click Apply. It will prompt you to Restart. You should see a difference, if you can get rid of some unnecessary processes running.  Of course, every computer can use a recovery periodically, to clean up the clutter in the registry and get rid of unused applications and processes. You'll need to save your personal files on an external hard drive before performing a recovery because everything on the hard driver will be removed and Windows will be reinstalled. 
    If you go through these steps and the computer still seems slow, or if the computer has always seemed slow since you got it, you may see an increase in performance by installing additional RAM. If you haven't already used HP System Diagnostics to test your hard drive you will to follow these steps for a Hard Drive test.
    Turn off the computer.
    Use one of the following methods:
    Turn on the computer and immediately press the F2 key repeatedly, about once every second, until the HP System Diagnostics program opens.
    OR 
    Turn on the computer and immediately press the Escape key repeatedly, about once every second, until the Startup menu opens. Then press F2 .
    The System Diagnostics window allows you to run several diagnostic tests. Each test determines if the hardware is functioning properly, and displays an error message and a warranty ID if there is a hardware failure.
    I hope these steps help. Let me know if you have any questions. I'll keep an eye out for your reply

  • Pages running slowly when using tables

    Hi,
    Pages is running very slowly whenever I try to type into a table. It also will do things like doing commands twice i.e. doubling the letters I press.
    My software and app is up to date, and nothing I have found here has fixed it.
    since iOS 7 Pages has also been a lot slower than it used to be.
    Thanks.

    Are you sure that the internet is running slowly?  Or, because you're using an external monitor, you're using more memory than before and you're having some issues with memory access?  You can open Activity Monitor and see how much free memory you have.
    One other thing.  Are you using discrete video when you're connected to a monitor?  Or are you using the integrated Intel HD3000 video.

  • Why does my brand new imac 's fan run consistently when I run parallels?

    My Mac seems to have a loud fan sound when I run parallels . However, when I removed parallels off my mac it runs silent . What is going ? Any information would be helpful. Thank you

    Hi. Check the link below.
    http://reviews.cnet.com/8301-13727_7-20074173-263/dock-using-100-cpu-after-os-x- 10.6.8-update-for-parallels-6-users/
    Stedman

  • Set up software does not start when connecting ipod for first time

    Hi,
    Just bought an ipod classic and appart from charging nothing happens when connecting it for the first time, I don't even see it in my finder window.
    Help please.
    Thanks.
    Mike.

    If your signature is correct in stating your computer is running 10.4.5, you need to run Software Update to get your system up to 10.4.10 or later.
    CG

  • Lost my iphone 5 data when backed up for 1st time.

    I lost all of the photos and other data on my I5 when i backed it up for first time. It asked if i wanted to back up from last date which i conformed. the last date was the date i backed up my old I4. Now it has reverted back to that data and everything taken since had I5 has gone. Can i get it back?

    You didn't "back up" your I5, you did a restore, and you chose the old backup from the I4.  Maybe you never did a backup of the I5.
    How to restore:
    http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
    Go to Settings>General>Reset and tap Erase All Content and Settings.  This will erase your device.  Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.

Maybe you are looking for

  • How to get the physical path of my web app root context ?

    Hi, I used this code to initialize my LOG4J logger.         System.out.println(Version + "Servlet context path : " + sctx .getContextPath());         String path = sctx .getRealPath("/");         fullyqualifiedlog4jpath = path + "log4j.xml";        

  • Not able to get performance gain using Multidimensional Clustering

    Hi All, We are trying to test the effect of Multidimensional Clustering on the performance of queries, infocubes/DSO loading and deletion of requests from BW objects. Unfortunately we are not able to see any performance gain when we use MDC. We are u

  • NavigateToURL(new URLRequest) with mailTo tag

    Hello, I am using the following code to send an email message, which works in development. sendMe_mc.addEventListener(MouseEvent.CLICK,fl_ClickToGoToWebPage); function fl_ClickToGoToWebPage(event:MouseEvent):void navigateToURL(new URLRequest("mailTo:

  • Can work in bpc only with user bpc_sysadmin

    Hi, Guys! I have just install BPC for NW sp03. I have windows domain controller and computer with window server that was included on this domain. on this computer I have install .NET part of the BPC. Under the user bpc_sysadmin I can saw the users th

  • Every time I try to buy an app I am told my password is incorrect.  Help!

    I cannot buy an app or update.  I keep getting told my password is incorrect.  When I reset it I am told it is incorrect again when I try to purchase.  I can, however, purchase music in iTunes.  Please help me!