Itunes 10.2.1 does not show remote speakers option
I have been having a strange issue on one of my laptops. I have two laptops - one with Windows 7 64bit and Windows XP 32 bit. On both laptops, I was able to connect to the airport express to stream music to my home theater (receiver) till a few months back. Both have the latest version of Itunes - 10.2.1. Now, the Windows 7 laptop continues to work fine but the Windows XP laptop is having problems. *Itunes does not show the remote speaker option. The airport utility does not recognize the airport express.* In the Windows Firewall exceptions, there are entries for Bonjour (port 5353 UDP), Bonjour Service (mDNSresponder.exe) and Itunes.exe and all are checked. Even if I disable firewall, it does not resolve anything.
The airport express is connected through an ethernet cable to the Belkin Wireless N router. The wireless mode for the airport express is switched off. The firmware on the airport express is version 6.3.
Few differences between the two laptops
Windows XP: I use a Belking Wireless N Notebook card to connect to the Belkin Wireless N Router. Antivirus is "McAfee VirusScan Enterprise + Antispyware Enterprise 8.7.0i"
Windows 7: I use the inbuilt wireless to connect to the same router. Antivirus is "ESET Smart Security 4.0"
Can someone help? I have researched the forum and tried the following things but still does not help.
1. Tried uninstalling Itunes and Airport Utility and reinstalling
2. Tried disabling Windows Firewall
I solved my problem I tried several other programs to play my music and since nothing seemed to work, i started deleting other software from my computer and apparently Uniblue's RegistryBooster was the one that caused the problem. Now able to enjoy music from my computer again
Similar Messages
-
I have my PC on, then plug in my iPad (which is on) and open iTunes. The iPad does not show up in the sidebar. How do you get it to show up so that I can select the iPad and then configure the sync settings in each of the settings panes....hoping that these actually show up.
In the manual it says "log in to your computer user account before connecting iPad". I am the only user of this PC...does this mean some other user account. I am confused. I need "baby steps" to tell me how to do all this....very senior and just learning about this wonderful machine. I will very much appreciate your help.If you are the only user on your computer you probably don't have multiple user accounts set up and can disregard that. If you are using iTunes 11 go to View>Show Sidebar. Now see if your iPad appears under Devices on the left side when you connect it. If it does, click on the name of your iPad on the left side and your iTunes sync settings options will appear in folders with tabbed headings to the right.
If it doesn't appear on the left side, follow the troubleshooting steps shown in this article: http://support.apple.com/kb/TS1538. -
I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?
Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same. -
After upgrade to ios 6, iphone 4 is not wroking, It suddenly stops responding to any actions. Today it totally stopped and is nothing working. Connected to itunes and the device does not shows up. Please help
Please turn off your caps lock.
All caps indicates shouting, is considered rude and is difficult to read. Many will not read such posts.
If you are unable to restore your iphone then try this:
iOS: Unable to update or restore -
I have just gotten my new ipad!!! I downloaded latest version of itunes but my ipad does not show in devices when I try to sync music. Any suggestions??
Does a little box come up seeing the iPad as a camera? That doesn't impact iTunes as much as it confirms that your computer sees the device. If your computer doesn't see it then iTunes doesn't know it's there.
If you're plugged into a hub or extender, try plugging it directly into the box or main part of your computer.
If you're using an extension, stop and just use the included sync cable.
Try using a different USB port.
After you installed iTunes, did you restart your computer?
Usually what's needed is the 'apple device driver' which installs automatically, you just need to sometimes trigger the install, using different ports helps with that.
If the simple trouble shooting doesn't help then you can search on the Apple Device Driver and there's more detailed trouble shooting on the site. -
My new ipad will not sync with itunes. the device does not show up in itunes
my new ipad will not sync with itunes. the device does not show up in itunes. I am on a Windows system
Do you have the absolute latest version of iTunes downloaded? If your iTunes software has not been updated in some time, your iPad will not be recognized. With iTunes open, click on Store at the top. Check for available downloads and if there are any, download them. Once you've verified you have the latest software, connect your device again, and it should be recognized.
-
No Mirroring in Ipad 2?
I have IPAD2 and Apple Tv 4.3. I can airplay videos/music from Ipad2 to my HDTV via ATV, but I cant mirror it. When I select airplay to switch from Ipad2 to Apple TV, Mirroring does not show as an option. What am I missing?That feature is not yet available, it is coming with IOS 5
http://www.apple.com/ca/ios/ios5/features.html -
movie i rented on itunes, downloaded on my pc does not show up on my mac book air. home sharing is turned on, and both computers are authorized. Help!
Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro. If I want to read on my mac I have to use Kindle or Nook. Which means any book I've already purchased through iBooks has to be read on my iPad. Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.
-
ITunes 9.1.1 does not show up in Software Update
I am aware that iTunes 9.1.1 is availible for download at Apple's website, however for some strange reason iTunes always alerts me to upgrade to 9.1.1 but when I open Software Update it says that "Software Update doesn’t have any new software for your computer at this time." I am currently running iTunes 8.2.1 if that helps any, and I would just like to know why the newest version does not show up in my Software Update and if there is anything that can be done to fix this.
download 9.1.1 from here: http://www.apple.com/itunes/download/.
JGG -
When trying to set up syn with outlook 2010 - it does not show as an option
When trying to set up syn with outlook 2010 - outlook it does not show as an option
Hi smrkevin,
Welcome to the BlackBerry Support Community.
What version of BlackBerry Desktop Software do you have installed? If you do not have the latest version listed here: http://bbry.lv/ds97JW I would advise upgrading it.
If you already have the latest version of Desktop Software, can you verify if you are running a Click to Run installation of Outlook? You can check this in Outlook -> Help -> About Microsoft Outlook. If you are using a Click to Run installation, you will need to install a full version of Microsoft Outlook to setup synchronization. For more information, see: http://bbry.lv/qDIoXO
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
Video preview does not show a quicktime option
My main videos are going to YouTube and I would like my preview in Premiere Pro CC to be quicktime so I can edit correctly to the format. Under New Sequence Settings it does not give me that option. Is there something I need to manually install?
What platform are you on? QuickTime is available as the Preview File Format [PFF] only on Mac.
In general, the PFF is not critical the final encoded output, but there are a couple exceptions. So I'm interested curious about why you feel it's important to have the PFF match your eventual export format.
Also, my understanding is that the preferred format for YouTube is h.264, not QuickTime. I haven't studied YouTube's recommendations/requirements, but I know for a fact that the format for all YouTube presets is h.264. -
MAX does not show Remote System tab in tree
Hi dear all,
i have installed LabView 2010 and along that MAX 4.7.7 on my Laptop Visat OS. Problem that i am facing is that my MAX tree "Remote System" Tab is not visible. Only My System tab is visible and its showing all installed software and devices correctly.
1. What settings i need to check to get this tab shown in tree?
2. Do i need to install some other software or patches or re-install what softwares?
3. Why is it happening to me?
Kindly help me with your valuable experiences.
Best Regards
awais qureshi
Solved!
Go to Solution.Hello Awais,
There are a few places that indicate the Real-Time Module has been succesfully installed. I am attaching screenshots of the following locations that indicate that this is the case:
-'Remote Systems' under Measurement and Automation Explorer (MAX)
-NI License Manager
-LabVIEW splash screen
If the Real-Time module/option appears in the locations listed above, there should be no reason for you to have to uninstall or re-install your software. If there are other indicators such as error messages or the module does not appear in these locations, please attach screenshots and a detailed description. We can then discuss if uninstalling or reinstalling the software is the next best option.
Best,
Patricia B.
National Instruments
Applications Engineer
Attachments:
Real-Time module LVSplashScreen.PNG 251 KB
Real-Time NI License Manager.PNG 88 KB
Real Time module- MAX.PNG 28 KB -
ITunes on Windows 7 does not show iPad2 as a device.
I want to use iTunes to trasfer contents to iPad. iTunes does not detect iPad while iPad shows in Windows Explorer. Last month it used to work sometimes, and every time after I reinstalled iTunes.
I have tried to reinstall iTunes, restart Windows 7 and iPad, and stop other Windows services. iTunes 10.5.2.11 and iOS 5.0.1 are the current versions.
I made an appointment with Apple Expresslane Support later, but wonder if anyone can help me here.It works now following the discussion "My iPad 2 doesn't show up in iTunes" posted by iFart last month !
Using the USB ports on the back of computer (instead of the front ones) works without a problem. -
It seems after my latest upgrade that my phone has stopped importing new photos and vids when I link up to my computer. It always would ask me if I wanted to tag new photos and then would import to computer. Now it does not and when I am in Itunes the options under my device does not include photos so i can't even import them manually. Any ideas on what is up?
iTunes doesn't import photos from your device, in only syncs photos from your computer to your device.
You may need to adjust your autoplay settings as outlined here: http://support.apple.com/kb/TS1500 (except to enable digital camera notification, not disable it) in order to restore automatic prompts to import photos. -
Why is my iphone not showing up on itunes? I just re downloaded itunes and it still won't show up.
http://support.apple.com/kb/TS1538
Maybe you are looking for
-
Hi Experts, We are working on a complex book design which contains heavy tables. The book design is portroit and some tables need to be set in landscape (90 deg rotation in portroit page). The customer requirement is whenever view the PDF pages in Ac
-
When I send a email from my from my ipad or iphone my name in the "From" part of the email is all in upper case letters. looks like this.........From: LESLEY BERRY <.................> I would like it to look like.......From: .Lesley Berry <.......
-
Error "Available quantity in bin is zero" with FM: L_TO_CREATE_MULTIPLE
Hi, all, I encounter one problem wtih BAPI: L_TO_CREATE_MULTIPLE. I want to transfer 100 batches from P01 storage type to P02 storage type , this function module show error "Available quantity in bin is zero". But the TO is created and this T
-
When selecting "Rotate Pages" from the "Document" drop down menu Acrobat 8 Professional 8.1.2 crashes. Every time, no error mesage. Have run "Repair Acrobat Installation" with no success. Any suggestions? Thanks
-
HT4623 i updated but lost all my photos
i updated and LOST all my photos, voicemails, texts. I am devastated!!! Please help