ITunes 10.3.1.55 opens when iPod plugged in

Hello,
I have iTunes configured to not open automatically when I plug my iPod touch 4G in, but it still opens automatically when I plug it in.
I am unable to enable or disable the checkbox to Open iTunes when this iPod is connected.
Has anyone else been able to stop iTunes from opening when plugging their iPod or iPhone in?
Thanks,
Dave

Thank you for your answer, but it's not really helpful since I need to manually manage my music because I don't use iTunes as my music program.  I was able to solve my problem by disabling the iTunesHelper process.

Similar Messages

  • Having itunes open when ipod is connected

    Nano 4th generation--iTunes always opened when iPod was connected to computer; now it doesn't and going to Devices and scrolling down Summary to "open when ipod is connected" is greyed out and will not allow me to check it.  Even going to the iTunes preferences does not offer this selection.

    You meant that you can't place a check mark in the check box "Open iTunes when device connected" ?
    Just do a little test: Click on Music and see if you can put there a check mark.

  • Itunes does not open when I plug in my ipod

    itunes does not open when I plug in my ipod mini!
    A window opens with the name of my ipod kiwi(E:) & a picture of a disk drive next to it.
    I have to manually open itunes. No error messages pops up, so I can't figure out what's preventing the system from recognizing my ipod. In the system tray in an icon safely remove hardware if I it click my ipod ejects. My ipod still charges as normal.
    Open itunes when this ipod is attached is checked off
    Enable disk use is checked off
    I ran a scan no malware
      Windows XP  

    So you connect the iPod containing a hard drive. I would guess you are using USB, right? Then Windows opens a window (wow, that's repetative) that identifies this as a USB hard drive.
    Am I close?
    It sounds like you've told the iPod to act in Disk Mode. On the same preferences pane that you are telling iTunes to open, uncheck the box for enable disk mode. the mini should stop telling your computer it is a hard drive.

  • My iTunes 10.4 will not open when connected with my iPod Touch (v.4.3.5), however, it used to in the past- can anyone help me?  Thanks.

    I am curious as to why my iTunes 10.4 won't open when connected with my Touch (v.4.3.5).  iTunes used to open  when connected with my Touch.  Can anyone help me?  Thankyou.

    I have got a solution, it was shared on another 'apple support coummunity' board:
    https://discussions.apple.com/message/15830348#15830348
    It worked for me

  • How can I get ITunes to open when I plug in my Iphone and show my Iphone

    ITunes does not open when I plug in my IPhone and my IPhone does not show up

    Open iTunes. Click edit. Open preferences. Click devices. Uncheck "prevent ipods, iphones, & ipads from automatically syncing". Close. Close iTunes. Plug in your phone

  • Do not want itunes to open when I plug in new iPad apple2

    Hello acn anyone tell me how to change this? I got  a new ipad apple 2 and I wanted to set up itunes on it by syncing it but do not want itunes to open when I plug it in right away and can not fix it . I tried to move itunes to trach and wanted to reisntall it but that did nto wrok. Not good with computers so I am sure i am missing an important step here. I need itunes I udnerstand to buy apps, but can nto find any help with this.
    Hanne

    Click on your iPad in the sidebar in iTunes, scroll down to the "Options" section, and uncheck "Open iTunes when this iPad is connected."

  • I just updated my iTunes to 10.5 and now when I plug in my iPod touch and iPad it won't sync or even recognize them.

    I just updated my iTunes to 10.5 and now when I plug in my iPod touch and iPad it won't sync or even recognize them? Help!

    having the same problem, my wifes is just fin and mine is invisible

  • I just updated my iTunes to the new software. When I plugged it into my computer and it said I need to reset my iPod. I did this and everything on my iPod deleted. Now, it won't let me sync my music or apps back onto my iPod. What do I do?

    I just updated my iTunes to the new software. When I plugged it into my computer and it said I need to reset my iPod. I did this and everything on my iPod deleted. Now, it won't let me sync my music or apps back onto my iPod. What do I do?

    It doesn't say anything. It runs through the sync process like normal and tells me all of the songs that it's synking. But then when it says I can disconnect it, nothing actually synked.

  • TS1567 My iPod touch told me to connect to iTunes because it was disabled, but when I plugged it in, it said that there was a passcode that was needed to be unlocked. But I cant unlock it because it is disabled. What do I do?

    My iPod touch told me to connect to iTunes because it was disabled, but when I plugged it in, it said that there was a passcode that was needed to be unlocked. But I cant unlock it because it is disabled. What do I do?

    Place the iPod in Recovery mode and then connect to yuor computer and restore via iTunes.

  • Itunes doesn't open when i plug in my iphone

    iTunes doesn't open when i plug in my iPhone

    You may have an incomplete iTunes installation.  Uninstall your iTunes and Re-install again.
    If this still fails, try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • Aperture 2 opening when iPod Touch is connected

    It used to happen with Aperture 1 and it was very annoying. Every time I plugged my iPod Touch into my Mac Aperture opened as if it were a camera. It was eliminated with an update but now it's happening again. Any way to stop this or do I just have to wait for Apple to fix it... again?

    molib is right. I just tested it with one photo in the saved folder and then after deleting it. That's still pretty inconvenient. for a slightly more complicated fix, see here:
    http://www.37signals.com/svn/posts/873-tip-prevent-iphoto-from-opening-when-you- plug-in-your-iphone

  • Why does iphoto open when i plug in my iphone instead of itunes?

    Why does iphoto open when I plug my phone into computer?  I thought itunes was supposed to open and it wont.

    Lwills wrote:
    Why does iphoto open when I plug my phone into computer?  I thought itunes was supposed to open and it wont.
    Becasue you have not set your preferences in itunes to open when a device is connected and you have set iphoto to open when a digital camera is connected.

  • Itunes 10.5, windows 7 - 64bit, when I plug in itunes store, the screen remains blank. My AppleApplicationSupport are 2.1.5 - 2.0.1 - 1.4.1 - 1.1.0. Thanks

    itunes 10.5, windows 7 - 64bit, when I plug in itunes store, the screen remains blank. My AppleApplicationSupport are 2.1.5 - 2.0.1 - 1.4.1 - 1.1.0. Help Me please. Thanks

    tis works by mee
    In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator".  Once it opens, type in the following command...
    netsh winsock reset
    hit enter and it should say something like winsock reset successful now reboot your computer.

  • HT1414 I "Erased all content and settings" and now my itunes does not recognize my iphoe when i plug it in. Plus my iphone is stuck with the apple symbol on it and wont do anything. what did i do?

    I "Erased all content and settings" and now my iTunes does not recognize my iPhone when I plug it in. Plus my iPhone is stuck with the apple symbol on it and wont do anything. what did I do? How do I get my phone to work again?    

    Reset, hold both Home and Power buttons until the iPhone begins to restart. Usually takes about 10 seconds time. If still problem. Open iTunes on computer. Connect iPhone to computer with USB Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware.

  • When iPod plugged in it tells me it can't be used because the mobile device service isn't started. It is not a phone and I've updated before. Any thoughts?

    When iPod plugged in it tells me it can't be used because the mobile device service isn't started. It is not a phone and I've updated before. Any thoughts?

    See Here...   http://support.apple.com/kb/TS1567

Maybe you are looking for

  • HP 200 Can i upgrade my processor For My laptop ?

    Can I upgrade my cpu like for gaming (Minecraft) and where i can buy it. My Laptop Info  hp  2000-2b29WM 2.20GHz Intel Pentium Processor B960 http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03499318

  • Connect to EAP-FAST corporate network

    Hi. I'm trying to setup my new macbook to connect to my company's wireless network but no luck. Here are the details from my WinXP laptop's Intel PROSet profile: +Enterprise Security:+ +Wireless Network Name (SSID): protected+ +Network Authentication

  • Additional Excise duty not posting to G/L account

    Hello, While capturing excise invoice in J1IEX, i am entering following value as: Basic Excise duty: Rs.140 Additional Excise duty: Rs.40 Education Cess: Rs.7 Sec.Edu Cess: Rs.1.4 After posting follwoing accounting entries occuring: Basic Excise duty

  • I sent a file to a friend and he can view one layer?

    I'm using a free trial version of illustrator and it has multiple layers. When I send it to a friend to open, he can only view one layer. Wondering what could be the issue?

  • How to automate PDF fillable form using QTP?

    Hi, I have a test scenario wherein it involves filling up and verifying the contents of a PDF form. I have the following installed: - Adobe Reader 9.2 - QTP 10 I followed the steps in the pdftesttoolkit and was able to see the pdf objects but wasn't