ITunes 10.3 wont crossfade
Hi folks, got a brand new MacBook Air and installed the latest version (10.3) of iTunes (managing 5000 mp3 files/ 76 Gb).
My problem is that the crossfade function, (properly activated in "playback preferences", doesn't work! It just don't fade. Any suggestions? Thanx a lot.
Many thanks.
Both the error 7 and the error 2 suggest that there's some damage to your Apple Application Support. (Apple Application Support is where single copies of program files used by multiple different apple programs are stashed.)
Let's try the procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh...
Similar Messages
-
I bought an app on itunes and it wont sync to my ipod touch
I bought an app on itunes but it wont sync to my ipod touch pls help i paid money for it.
AngieFromDaBlock wrote:
I bought an app on itunes but it wont sync to my ipod touch
Is it compatible with your iPod Touch and its iOS version...
If yes... Contact the Developer of the App.
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
My itunes in computer wont let me transfer my apps to my ipad. I have the latest version of itunes. Please help. When I press sync it says its syncing but at the end the apps are still not on my ipad.
I need help. Hope you could help me.Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Just updated my itunes but it wont open due to runtime error what do i do?
just updated my itunes but it wont open due to runtime error what do i do?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Restoring ipod and it say's can't find software and use a cd-rom if necessary. My ipod is stuck on the connect to itunes screen and wont do anything. What am i supposed to do?
Please help, i will be very gratefulyou can do is go to ijailbreak.com then select downloads section.......scroll down and see the latest version of ipod touch second generation is available for download.....when it gets downloaded connect your iPod to itunes or keep it connected then hold option and click restore (mac) search the software by writing in search "iPod" a thing with white cube will show up if it is the file you just downloaded click it and wait for itunes to do its work......you can ask more if you are on windows
-
I have had to put my ipod touch in Recovery Mode and tried to sync it with itunes but it wont restore itself. What can I do?
http://support.apple.com/kb/TS3694#error3194
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
hi all, complete novice to this so step by step answers much appreciated please. thank you. Ibooks app showing in my itunes apps but wont sync with my ipod touch - have tried deleting app in itunes then re-downloading but still wont sync, any ideas please?
See if this helps
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch -
i need help!??? i just tried to update my ipod and now its making me restore it on itunes and it wont complete the restoring process. Its giving the warning that the updated software server couldn't be reached. Can anybody help????
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem -
Never before have i ever updated my iphone off the computer, there has been issue with backs up. So i went to back up my iphone 4s, it needed to be updated. so i updated it, during the update something had occur and my iphone 4s screen says connect to itunes be it wont connect???? i tried so many things. Ps this is my mom and she needs it
we have itunes off a PCHello there, Nunesie.
It sounds like your iPhone is not being recognized in iTunes by your computer. The following Knowledge Base article provides some great, in-depth steps for troubleshooting that issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If after following the above steps, the issue persists, then the following article helps with completing the update/restore:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
i had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.
I have taken all apple products off my computer per other suggestions, I have run malwarebytes with no viruses found, and have even tried installing itunes as a different user on my computer but get the same message everytime.See Troubleshooting issues with iTunes for Windows updates.
tt2 -
I started to update my ipad but I have an old MacBook and it's really old and I don't have the correct software to update anything. But my ipad is stuck on the connect to itunes screen and wont budge. What do I do?!
Your options depend on which MacBook you have and the version of OS X installed.
To find out: > About This Mac -
my computer had an virous so i wiped it and i need to add my old songs on my ipod to my new itunes but it wont let me without deleting my music
- Transfer iTunes pirchases by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
- Make a backup of he iPod by connecting the iPod to the computer. Right clickon the iPod under Devices in iTunes and select Backup
- Restore the iPod from that backup. -
I bought my song from iTunes and it wont download to my iPhone.
I bought my song from iTunes and it wont download to my iPhone.
What have you tried?
What happened?
Error message?
What did it say? -
Itunes nor quicktime wont open on windows 7
my itunes nor quicktime wont open i uninstalled and installed itunes i tried disabling bonjour i added a new users i did a virus scan i am all out of ideas i need major help
Many thanks.
I think we'd better see if some other application (other than QuickTime itself) has dropped old QuickTime componentry in the system files on the PC. (If there's a version mismatch between the old componentry and the "QuickTime proper" componentry, that can create those error-message-free launch failures for both iTunes and the QuickTime Player.)
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
i down loaded ios 6 now my phone wont turn on it has been 2 days and it is really bugging me it keeps saying link to itunes but it wont link itunes asks me to restore the phone and i dont want to loose my info ps i have itunes 10.7
you must restore i would put in dfu mode if it isnt asking to restore when you plug it in
Maybe you are looking for
-
I have a new helmet cam (Go Pro HD Hero). I have been playing around with the 5 formats for video. I did a 30 second shot with each of the 5 formats. FCP would not recognize 2 of the formats I tried to bring into Final Cut. The two formats are both o
-
I am running WLCS 3.2 with WLS 5.1 & SP6 on an NT 4.0 system and the java -version gives this output: D:\WebLogicCommerceServer3.2>java -version java version "1.3.0" Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.0-C) Java HotSpot(TM) Cl
-
To access the value of the fields in selection screen
Hi, I have used PNP Logical database in the report and also I have created a Report category with organizational unit,begin date and end date.so in my selection screen,I have these three fields. Now i need to get the value of those fields in the prog
-
Client Commands are Currently Not Being Accepted due to restructuring
Hello, We are running Essbase and Planning 9.3.1. Occasionally, the users get the above error, "Client Commands are Currently Not Being Accepted", because Essbase spontaneously starts restructuring itself. We schedule a restructure in the evening. Is
-
Windows 7 x64 SP1 updates not applied to image
I am having a very strange issue. After working correctly for over a year, my build and capture Windows 7 x 64 SP1 task sequence is not working. The first part of the problem is that the image will not capture on a SCVMM 2012 R2 cluster. That proble