Itunes 10.4.1 doesn't recognize my iphone4.

I just installed itunes 10.4.1, but it doesn't recognize my iphone4. The laptop says I need to install a 64 bits version of itunes, but 10.4.1 is a 64 bits version?

Is this the version you installed:
http://support.apple.com/kb/DL1427

Similar Messages

  • This Question is at least 2.5 years old.  But still an issue.  I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7.  Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

    I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7.  Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

    iTunes does not use the .xml it uses the .itl
    If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

  • ITunes 10.5.1 doesn't recognize my iPhone 4 iOS 5.0.1 (9A405) Laptop OS Windows XP. Please help

    iTunes 10.5.1 doesn't recognize my iPhone 4 iOS 5.0.1 (9A405) Laptop OS Windows XP. When I connect iPhone to laptop, iTunes sends me an alert:" This iPhone can't be used because the Apple Mobile Device service is not started". This started right after I have upgraded iTunes from 10.5 to 10.5.1. Please help !

    Thanks for the hint ! I used the following link http://support.apple.com/kb/HT1925.
    1. Remove iTunes and related components from the Control Panel
    2. Verify iTunes and related components are completely uninstalled
    3. Reinstall iTunes and related components
    Had to remove all Apple related softwares and utilities, and re-install all back. iTunes recognizes my phone now ! Cheers !

  • Itunes (10.6.3) doesn't recognize my Iphone 5 (iOS6). Can somebody help me? thanks!

    itunes (10.6.3) doesn't recognize my Iphone 5 (iOS6). Can somebody please help me?
    I have a Macbook with the latest version of Itunes (10.6.3) and I just bought the new Iphone 5 with the latest operating system on my iphone (iOS 6)
    I'm from Amsterdam, The Netherlands.
    I already tried another USB-portal. I tried restarting my macbook.....what could be the problem?
    I hope to hear from you...
    Thanks!

    ok believe it or not....but I found the answer and everything works now!!!:
    Once again hanks for the help guys!
    Symptoms
    In rare circumstances, an iPhone, iPad, or iPod touch may not be recognized in iTunes on Mac OS X v10.6 Snow Leopard after the Mac is restarted. If you reinstall iTunes, your device may be recognized. However, restarting your Mac may result in the device not being recognized again.
    Note: These steps do not apply to OS X Lion or Mountain Lion.
    Resolution
    Follow the below steps to troubleshoot the issue.
    Note: Some of these steps will require that you enter your Mac OS X user password. If you do not know your user's password, follow this article first.
    Install all software updates. If you have an update available for an SDK (Software Development Kit), be sure these updates are also installed. Do this by clicking the Apple () menu, choosing Software Update, and following the on-screen instructions. If you need to download iTunes manually, you can download it here.
    Disconnect the device and quit iTunes.
    In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears:
    /System/Library/LaunchDaemons
    Click Go.
    Locate the file "com.apple.usbmuxd.plist~orig" and drag it to the Trash. (Do not move the similarly named "com.apple.usbmuxd.plist" file to the Trash.)
    Restart your Mac, open iTunes, and connect your device. If your device shows up in iTunes, restart your Mac one more time and confirm the issue is still resolved.

  • Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    http://support.apple.com/kb/ht1808
    http://support.apple.com/kb/ts1567
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I want to download a free app from the UK itunes store and it doesn't recognize my US apple i.d.

    I want to download a free app from the UK itunes store and it doesn't recognize my US apple i.d.

    That's right.
    Go to Settings > iTunes & App Stores > Apple ID > View Apple ID > Country/Region and change it.

  • I updated my itunes and now it doesn't recognize my ipod touch

    Ever since I updated my itunes to the latest version, it doesn't recognize my ipod therefore I can't sync new songs onto it.
    I tried following these apple help steps http://support.apple.com/kb/TS1363?viewlocale=en_US but am stuck on #4-11...for some reason I can't delete the Temp folder because it's saying I still have a program open but I'm sure I've closed everything!

    You want this article. The article you cited is for regular iPod, not iPS Devices (iPod touch, iPhone and iPad)
    iOS: Device not recognized in iTunes for Windows

  • ITunes 9.0.1 doesn't recognize my iPhone.

    I loaded iTunes 9.0.1 on a Clone while my iPhone was connected to Clone . . . usually, I sync my iPhone to my MacBookPro. Now, my iPhone displays a picture of the connection cable, an arrow pointing to the CD disk labeled iTunes. When I connect the iPhone to the Clone, iTunes doesn't recognize my iPhone! Any suggestions?

    Hi inesnauw123,
    If you are having an issue with iTunes not recognizing your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Upgraded to iTunes 8, now it doesn't recognize previous music folders

    I have stored my iTunes library on an external hard drive (F drive). When I updated to iTunes 8, the update automatically reset my preferences to the C drive.
    I changed the iTunes music folder preference back to the F drive but it does not recognize any of the music stored there. It does allow me to store other music on the F drive, but will not recognize previously existing music.
    How do I get my music back?

    Well I reloaded the files and that seemed to help, I'd say I recovered about 75% of my music but that still leaves about 500+/- songs that iTunes 8 doesn't recognize. Now I need to go back and manually load each CD and hope that resolves the problem that iTunes 8 caused.
    What a pathetic "upgrade."

  • I downloaded the latest iTunes and now it doesn't recognize my iPhone

    I downloaded the latest iTunes update and now it doesn't recognize my iPhone

    Thank you so much for your reply! I ended up calling Apple Support. (My phone was still eligible for free support.) The person was very helpful and was able to help me resolve the problem. In my case, it involved deleting itunes and some other things from my PC computer and reinstalling them. Works perfectly now.

  • MacOS iTunes 11.0.5 doesn't recognize iPad or iPhone.

    I just returned from a two week vacation, and plugged my iPad and iPhone into my iMac to sync them and discovered that iTunes doesn't recognize them either on my wifi network, or via USB. 
    iTunes (11.0.5) does recognize my iPod nano, and iPhoto does recognize my iPhone and iPad.  They are just totally AWOL in iTunes.  I've tried rebooting all of the devices including my computer, and all of the other relavent steps in the troubleshooting guide.  Nothing helped.
    I successfully synced both devices to my iMac before leaving for vacation, but I can't remember if I did that before updating iTunes or not. 
    I even erased my iPad and then tried connecting it to my iMac, and still no luck. 
    Also, my device back ups are no longer showing up in the "devices" tab in iTunes preferences. 
    My MacBook Air, running iTunes 11.0.4 recognizes both devices.  Both my laptop and my desktop are running OS 10.8.4 
    Has anyone else experienced similar issues?  Any solutions?
    Cheers.

    I thought I'd reply to my own post in case this can help others.  I solved my issue by downloading and re-installing iTunes.  I didn't even need to un-install it via Terminal first.  I ran the installer, and my iPhone and iPad connected immediately. 

  • ITunes 11.0.4 Doesn't Recognize Devices

    I've recently updated my itunes and plugged in 2 iphone 4Ss and two iPads, iTunes doesn't recognize any of them.  I've restarted, reset, etc.  I'm running 10.8.4 on my iMac.  iPhoto does recognize all devices so the connection to the computer is proven OK. 

    I had the same problem
    Just redownload the 11.0.4 update and itll work fine and sync. Dont delete itunes just redownload the uodate. Goodluck

  • TS1363 I want to move my itunes libarary from my PC to my ipad - itunes on my PC doesn't recognize my ipad as a "device

    itunes on my PC does not recognize my ipad as a device.  Windows explorer does recognize that an ipad is attached.  What am I doing wrong?

    Hello LewRees,
    I'd wager that it's not something that you're doing wrong, but possibly something that your computer's doing wrong. The following article would be a good place to start in the process of getting your computer to correctly recognize your iPad.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Allen

  • I updated my ipad with the IOS 6 but now the itunes in my computer (itunes 10.6.1) doesn´t recognizes it and I can´t upgrade to the last itunes because my computer has OS 10.5.8. Any ideas? Is there a way to download the itunes 10.6.3?

    Please Help! Since I upgrade the ipad with the IOS6 I haven´t been able to sync the ipad with the computer. When I connect the two objects a popup itunes text box appears saying that in order to recognize the ipad I need itunes 10.6.3 or later. But I can´t find that version to download, I just find the latest version of itunes, 10.7, and for that one my computer doesn´t meets the operating system requirements.

    If your iMac is an Intel CPU model, you can upgrade the OS to OS X 10.6 Snow Leopard.
    Then use software update to update 10.6 Snow Leopard to OS X 10,6.8.
    Then you can run the latest iTunes to sync your iPad running iOS 6
    You can purchase OS X 10.6 Snow Leopard by calling Apple at 1-800-MYAPPLE. Ask for retail software sales and purchase a copy of 10.6 for $19.99 plus shipping.

  • Itunes 11.1.4 doesn't recognize iphone

    i am running Windows 8 (ugh) and can't get itunes 11.1.4 to see my iphone 4, IOS 7.0.4.  This has just recently started (my last backup thru itunes was 1/9/14.)  Also, the pc sees the phone as it appears in the devices & drivers section of my directory.  I can move pictures from my iphone, too.
    When I plug the usb cord into my computer, i now get a message on my iphone about whether or not to trust this computer.  I say yes & then I can see it in the directorys.  This is new - it didn't use to do this.
    I have repaired itunes from the control panel & have double checked the settings for Apple Mobile Device as per the discussion http://support.apple.com/kb/ts1538
    Any suggestions would be appreciated

    Well, I figured it out myself. I read the comments/notices that the USB 2.0 has to be in working condition to use it, and I switched cables around, but ended up with them in the same place. I know they work; I've used them before. I have a charging case that uses a micro USB cable to charge, which USED TO be able to connect my iPhone 5 to the Mac. Since the iOS 7 upgrade, the Mac doesn't see it. I de-cased the phone, used the lightning cable and the Mac saw the device.

Maybe you are looking for

  • Web services 10.1.2 & 10.1.3 dev preview

    Hi, I'm trying to generate a simple web service using both the 10.1.2 and 10.1.3 versions of JDev. I create a simple class with one method to add two integers toegther and return the result. Everything generates with no errors reported but when I try

  • Allocating Standard and Variances of Production Costs into CO-PA

    Hi Experts, I would like to ask you about the process of allocating eg. humal labour into CO-PA. Lets have an example: We have planned to spend 10 hours on some action. But actually we have spent 20 hours. When we allocate our time from some PC, we h

  • SQL query for date picker

    On a reports page there are two 2 date picker items ( a datefrom and a dateto) along with a text field with autocomplete item When the page loads the following query is called SELECT "COL1", "COL2", "COL3", from "TABLE" WHERE MYDATES BETWEEN :DATEFRO

  • Really ticked off with BT wasting customer's time ...

    It's the last bit of the post which I am even more ticked off about, today BT WASTED even more of my time for no reason.  Here's the background though, and the reason for asking (again) for my call back. During last year our area (Pembroke Dock, Pemb

  • Z3 Compact Delivery

    Hi all, I'm not here to ask for estimated time on deliveries, but just to show my disappointment about this: Handtech and Clove, two of the best known mobile tecnology online shop in UK, are delivering the z3 compact this morning, as said by many use