ITunes 10.4.(1) on Lion + Squeezebox Server = crash

Hello!
Every time I've opened iTunes and Squeezebox Server at the same time my macmini 2010 crashes after a while when playing music via Squeezebox.
There are no problems I can tell about when I use Squeezebox in case of shutting down iTunes before and it doesn't seem to make any problems using iTunes even with a Squeezebox Server started up before.
The crash of iTunes leads to a restart of my macmini, and in the log I definitly can see that iTunes had crashed before restarting the system.
Thank You and have a nice day,
diezpesos

I figured out how to show the hidden files, but even after doing that, the files weren't there.  On the page that you showed me, it says "Note: These steps do not apply to OS X Lion" and since I am using Lion, it didn't work

Similar Messages

  • Manually migrating iPhoto and iTunes from Snow Leopard to Lion..

    Hi all,
    I received a shiny new iMac yesterday and in my haste to get it up and running, I began to run the migration assistant on wi-fi.  Unfortunately, my 2006 macbook model is so old that my firewire cables don't actually fit the firewire port on the back of the iMac!!
    11 hours later, there was still 40 hours left to go.  At this point I manually quit the migration assistant. Partly because I have to work and to work I need to use a computer and partly because I realised that I don't want all the old crud from my previous system.. all I want is my iTunes (songs, apps, playlists etc) and my iPhoto to migrate.
    The original admin account that the migration assistant was going to replace was still there.  Everything seems to be working fine... I did a quick repair of disk permissions and all seems fine.   So, I think I flirted with danger by quiting the migration assistant, but danger doesn't seem to have flirted back.
    I've searched high and low on the web and I can't find any advice on migrating just your iPhoto and iTunes from Snow Leopard to Lion.  I did read a post somewhere (relating to a migration to Leopard) where someone wrote that, for iPhoto, you simply had to replace your iPhoto Library in your pictures folder on the destination machine and then simply start iPhoto.  iPhoto would upgrade the databases etc and all would be fine in the world.  I cannot find a post online that suggests that this is also the case for Lion.
    Can anyone here give me some hints on how to manually migrate the iPhoto and iTunes libraries over (and still preserve playlists in iTunes, albums/events in iPhoto etc)?
    I figure that I cannot be the only person in the world who wants a "fresh start" on their machine, with the exception of iPhoto and iTunes.

    Resident apple gurus at work have advised me to use the migration assistant and plug an ethernet cable between machines.
    I'll give this a go and then go through the process of removing and cleaning up whatever old data I can.. but if someone posts a response to this question for me, I'll happily roll back in time-machine and go again in a cleaner way. :-)

  • Please Help!!! 'iTunes cannot connect to iphone update software server'

    I cannot 'Restore' iPhone 3G to pass on to my fiance, after she kindly allowed me to get a new iPhone4 because iTunes 'cannot connect to iphone update software server'. I have tried both our laptop and desktop - both connecting to the internet fine - but neither will connect to the iTunes store nor update servers!!
    Not sure what to try next, have tried setting up new user to no avail.
    I have followed the support guidance and I am not connected through proxy.
    Diagnostics reported as follows:
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    Dell Inc. Dell DV051
    iTunes 9.2.1.5
    QuickTime 7.6.6
    FairPlay 1.8.20
    Apple Application Support 1.3
    iPod Updater Library 9.2d4
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.1.0.62
    Apple Mobile Device Driver 1.49.0.0
    Bonjour 2.0.2.0 (214.3)
    iTunes Serial Number 098625257EFAC14A
    Current user is an administrator.
    The current local date and time is 2010-07-25 12:16:28.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Video Display Information
    Intel(R) 82915G/GV/910GL Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {F45A9B15-8BE6-4964-8534-71947B51A91B}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: 192.168.1.77
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: No
    DHCP Server: 255.255.255.255
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers: 192.168.1.1
    192.168.1.1
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-07-25 10:25:45.
    ** Device Connectivity Tests **
    iPodService 9.2.1.5 is currently running.

    Right, I'm going to try something, if this works, then this'll probably fix a lot of iTunes problems.
    1: Make sure your whole iTunes database is backed up.
    2: Uninstall iTunes, then run "Revo Uninstaller", this will remove ALL traces of iTunes from you computer, not your library.
    I've found out that when un-installing or re-installing over a previous version of iTunes will carry over some problems from previous versions, or even create problems. Registry leftovers can be a problem also. Completely removing iTunes using "Revo Uninstaller" then re-installing will have the same effect as installing iTunes from a fresh OS install. Typically iTunes should be problem free when installed totally fresh.
    3: Re-install the correct version of iTunes fresh and try again.

  • HT4623 i have ios 4 version and when i try to update my iphone to the latest version it with itunes it can't reach the update server. what should i do?

    i have ios 4.3.3 version and when i try to update my iphone to the latest version it with itunes it can't reach the update server. what should i do?
    p.s.: i don't have any cinnection problem.....

    It could be the fact that your hosts file is directing itself to gs.apple.com Cydia not gs.apple.com Apple,
    Hope it helps
              http://support.apple.com/kb/TS3694
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Itunes not working in OS LION

    Itunes not working after OS Lion upgrade -- pls help
    Process:         iTunes [252]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         10.4 (10.4)
    Build Info:      iTunes-10408001~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [107]
    Date/Time:       2011-07-30 02:38:53.789 +0800
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          11477 sec
    Crashes Since Last Report:           18
    Per-App Crashes Since Last Report:   16
    Anonymous UUID:                      D037880E-2DBC-46ED-9A0D-389F6DAF93C2
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
           0x10ee75000 -        0x10fda5fe7  com.apple.iTunes (10.4 - 10.4) <73B152D5-6088-0047-3C63-0A466B55E7EF> /Applications/iTunes.app/Contents/MacOS/iTunes
        0x7fff6ea75000 -     0x7fff6eaaa1ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    Model: MacBookAir3,1, BootROM MBA31.0061.B01, 2 processors, Intel Core 2 Duo, 1.4 GHz, 2 GB, SMC 1.67f4
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR3, 1067 MHz, 0x02FE, 0x45424A3130554538454655302D41452D4620
    Memory Module: BANK 1/DIMM0, 1 GB, DDR3, 1067 MHz, 0x02FE, 0x45424A3130554538454655302D41452D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD1), Broadcom BCM43xx 1.0 5.100.198.11 )
    Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en0
    Serial ATA Device: APPLE SSD TS064C, 60.67 GB
    USB Device: FaceTime Camera (Built-in), apple_vendor_id, 0x850a, 0x24600000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x04500000 / 3
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821b, 0x04530000 / 5
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0242, 0x04300000 / 2

    same problem here
    when i try to open it a message apears:
    Process:         iTunes [285]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         10.4.1 (10.4.1)
    Build Info:      iTunes-10411001~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [197]
    Date/Time:       2011-09-04 11:13:33.842 +0200
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          35334 sec
    Crashes Since Last Report:           16
    Per-App Crashes Since Last Report:   12
    Anonymous UUID:                      C15F2131-32E8-4795-8279-5B3951245763
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
           0x10dc07000 -        0x10eb43ff7  com.apple.iTunes (10.4.1 - 10.4.1) <F88E03A5-CC9A-EF15-C4C3-16DE46FBCF09> /Applications/iTunes.app/Contents/MacOS/iTunes
        0x7fff6d807000 -     0x7fff6d83c1ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    I have tried deleting and reinstalling, rebooting it doesnt work...
    Model: MacBook6,1, BootROM MB61.00C8.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.51f53
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313132533642465236432D47372020
    Memory Module: BANK 1/DIMM0, 1 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313132533642465236432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 5.100.198.11 )
    Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: TOSHIBA MK2555GSXF, 250,06 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Trans-It Edge, 0x0718  (Imation Corp.), 0x065b, 0x24100000 / 3
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24400000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0237, 0x04600000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    here is my page if it helps you:
    https://discussions.apple.com/thread/3306286

  • Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server.  Help!

    Ipod screen says to connect to itunes but won't let me enter my password. Tried recovery mode but when I click 'restore' itunes says it cannot connect to update server.  Help!

    Place the iPOo in recovery mode for the passcode issue. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    Also see:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • New iphone 6 with ios 8.0 crushed and didnt open again. call center told me that use itunes to update 8.0.2 but server is too slow and didnt let me download it. it stopts in the middle of the session. how can i download it from another link or server

    new iphone 6 with ios 8.0 crushed and didnt open again. call center told me that use itunes to update 8.0.2 but server is too slow and didnt let me download it. it stopts in the middle of the session. how can i download it from another link or server. by the way i try to dowload from turkey.

    anyone help me there? )=

  • Housing my iTunes library on my Windows 2008 R2 Server at home...

    Greetings everyone!
    I am a complete iOS junkie; needless to say I own multiple devices.  And, over time my iTunes library has grown to over 50GB in size.  Keeping this in mind, with how often I also change out computers, I decided to host my entire iTunes library on my server.  The reason being mainly that the server is on RAID and backs everything up every single night, so if anything were to corrupt I could easily restore.
    Now, I have iTunes 10.5 running on a new Core i7 notebook, which is permanently docked on the media shelf - and it's ONLY function is to run iTunes, auto-download all new purchases and updates, and to enable wireless sync to all of my devices in the house.  I have a permanently mapped drive going to the server location where the iTunes library is stored...
    Well, everything runs fine, however I am a bit surprised that with a very hefty 1GB Cisco network, that when iTunes gets to the sections "determining apps to sync" and then "determining tracks to sync", that these parts of syncing are incredibly slow.... but they do finish correctly.
    Are there any thoughts out there on possible speeding up this process, besides having iTunes copy the whole library locally?  I suppose if I needed to, I could have the library kept locally, and then a local backup job send a backup to the server nightly - but it was easier this way.....  Any thoughts on this are appreciated
    Thanks much!

    I have CHANGED MY TUNE (LOL) - iTunes is not a happy camper when the installed default iTunes media location is always on mapped server drive.  I have simply changed the following:
    I allowed iTunes to make local copies of everything to the host machine (locally) and I have changed the default location of iTunes Media to the local drive.  No more going over the network.....
    I have set an automated backup in Windows every night to run at 1AM which will push it's backup set to the server...  this way the library is always backed up.  This has cut down by 800% the amount of time that syncing was taking...
    OH WELL guys - I suppose I just typed my question too quickly without thinking it through.  Thanks - have a great rest-of-the-weekend,
    Mike

  • Should I update my Mac book for Itunes for the update for Lion if my Mac book is running on Leopard?

    Should I update my Mac book for Itunes for the update for Lion if my Mac book is running on Leopard?

    I don't understand your question.
    You can update itunes to the most recent available version for leopard without updating to Lion.

  • When i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well

    when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???

    I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
    DT

  • Why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet?

    why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet? i need to update my ipod i even changed the LAN settings and it stilll doesnt work

    Have you seen this article?
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    B-rock

  • TS3694 after updating iphone 4s to ios7 , it restart and asking me to connect itunes , i connect it to the pc wz cable, the message appear that itunes couldn't contact iphone sofware update server coz there is no internet , i try other one and it works no

    after updating iphone 4s to ios7 , it restart and asking me to connect itunes , i connect it to the pc wz cable, the message appear that itunes couldn't contact iphone sofware update server coz there is no internet , i try other one and it works normally

    Oh ...
    That makes it difficult. My new (working) phone is a 4S and the SIM card does not fit. The old SIM card is in the 3GS but as far as I know it was was deactivated.
    But it seems that with other updates over the last couple of years this was not necessary and my partner went through the same update with her 3GS with no problems.
    Should I go to my AT&T dealer and purchase a new SIM card? Is there still a new one available?

  • Getting Accessing iTunes Store..   Never able to access it.  Also try to update 10.6.1.7 itunes and i get could not contact server??? thoughts please

    I am getting Accessing iTunes Store.. in the midlle pane with the status bar    Never able to access it.  iTunes does not lockup but cannot access itunes. Also tried to update current version 10.6.1.7 of itunes and i get could not contact server??? thoughts please.  PC specs.  Windows Vista home 64 bit OS. IE 9

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 &amp; above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Migrate from Exchange Server 2011 to Mac OSX Lion Mail Server

    Hi all,
    I'm looking to migrate from Exchange Server 2011 to Mac OSX Lion Mail Server.  I work for a company with roughly 30 employees and they use exchange for mail, contacts and calendars.  We want to take full advantage of OSX Server and to completly get off of exchange.
    What are the best ways to do this?  Are there any tools available to help this process?

    I agree with the points made by Strontium90. If you have any PCs then Apple's mail/contacts/calendar software is a poor choice. Kerio Connect as a mail/contacts/calendar server would not only support Macs but would also do a good job supporting PCs running Outlook.
    If you are going to become a pure Apple site, then you could use just the Apple software and this would be cheaper than using Kerio. For 30 users this might be a suitable solution, however even in a pure Apple environment many people prefer Kerio. For example I find Kerio much more pleasent when dealing with email addresses across multiple domains, email aliases, email group addresses, and so on. Kerio also has built-in email archiving, that is keeping a record of all emails. Kerio also provides a web-browser client for accessing email, calendar and contacts. It is worth noting that as standard Mountain Lion Server no longer includes a webmail feature. While I personally find the Kerio webclient rather ugly it does work.
    There are some annoyances I have with Kerio, firstly they have always charged a 'maintenance' fee for their software. This provided access to software updates, and in the past also provided access to Kerio technical support. Unfortunately they now only let you make two (2) support cases per year for that cost, and you now have to pay extra for any more cases. Also while they added support for EWS (Exchange Web Service) to allow using Outlook 2011 for Mac as a supported email client, they did a poor job of this so that it does not work properly with any other EWS compatible client. This means it will not work in EWS mode with Apple Mail, nor with Outlook for Windows. While there are other ways to connect these other clients, this seems a foolish move and there have been plenty of requests to fix this.
    Apple's Mail client uses EWS to connect to a 'real' MS Exhange server.

  • Can individual ibooks be managed using OS X Lion MDM server?

    Does the MDM server in Lion's profile manager have the ability to send push notifications with links to download free ibooks in the same way you can send push notifications to distribute enterprise apps?
    Also, will the MDM server allow you to delete existing ibooks?
    -dfek

    Hi Camelot,
    Thank you very much for the quick reply and for the information provided. Most appreciated!  Apologies for the delay to respond.  I have emailed Mailradar the results of the open relay test but I am still waiting on their response.  I have tried another open relay test tool, myDNSTools.info, but it returned the same results as the Mailradar. It looks to me as if it could be a timing issue, for example the Mailradar shows that the response for the MAIL FROM: command (250 2.1.0 Ok) arrived after the RCPT TO: commnad was sent.  Therefore the open relay test assumes that relay is allowed even though the the mail server response is:
    554 5.7.1 <[email protected]>: Relay access denied
    If this is the case, I am not sure if the timing issues is something that I can control here at my end.  I was wondering if this could be caused by the spam filtering rules available in OS X Lion mail server?
    Thanks again,
    Reading1995

Maybe you are looking for

  • Purchase Order Quantity should not be more than PR quantity

    Dear all, We want to control Purchase Order quantity against Purchase Requisition. We have configured message setting 00 076 as  ERROR. when we create Material PR for lets say 100 quantity. When we create single or multiple Material PO against this P

  • [SOLVED]Unable to boot in UEFI mode from CD

    Hello gents! Here's the problem: According to the beginner's guide I followed the instruction to test if I am in UEFI mode: In case you have a UEFI motherboard, the CD/USB will launch UEFI Shell and display a message that startup.nsh script will be l

  • "pointer to incomplete struct" Error

    I keep geeting the error "Type error in argument 1 to `DLLStruct'; found 'pointer to struct parameters' expected 'pointer to incomplete struct parameters " I'm trying to pass a pointer to a struct as an argument to a function in a DLL.  This is just

  • How to store Video file in Oracle9i database

    Hi I am working on Oracle9i Database. I am using Oracle9i Forms Developer for front end side. I want to Store a video file in a database table. I know that there are some data types like BLOB which support such activities but actually i dont know the

  • Incrementing every letter in a string that occupies an odd position.

    Hi, for an "encryption" project, i need your help creating a method that will be incrementing by 5 every char in a string that occupies an odd position in that same string. For example : 'adam' should return 'aiar' -Method can't use arrays. -Method c