Itunes 10.4 and Lion 10.7 create remote speakers not to keep connection using Airport Express
MACBOOK with 10.5.8, then 10.6.8 and today 10.7...Lion
There is a major problem regarding the connection to remote speekers with Itunes 10.4 and Airport Express using LION OS X. This is a problem I never encountered before, nor with 10.5.8 or 10.6.8.
Please correct that problem.
PINKCANDY
Hi,
At you question : Lynksys 160-wr ore something....
This is something above my capabilities.
The way that tab is configured is AUTOMATIC.
Trying to do it manually require IP for rouer, and I dont't know how to get it, even if I perfectly know what an IP address is.
It is also required to enter IPV6 address, and there to I am lost.
Lastly there is the last tab, amaller bar that I don't know.
May be explain in what way, having this manually entered is different that automatic would make me understand correctly. Then, may be indicate how to get these info to fill in.
But, I can say that I am now using APPLE TV-2, and that the first Lion 10.7 patch seems to have solved this.
Regards
Similar Messages
-
Can I create a home network withous dsl connection with airport express
can I create a home network without dsl connection with airport express?
So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network.
-
I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.
Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router. -
I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes. I'm not sure of what to do. It's quite frustrating, and all I need is advice, and help. I would much appreciate it. Thank-you.
In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi. -
How to use base band wave,subcarrier wave and carrier wave to creat the FM wave? When I use the MT Modulate FM VI in USRP,I don't konw how to
use it.https://decibel.ni.com/content/docs/DOC-24206
Let us know if that example doesn't help you
Anthony F.
Product Marketing Engineer
National Instruments -
Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.
(Apologies for butting in, wha.)
now older version is not able to connect to itunes store error 306. I am using windows 7.
If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
iTunes for Windows 9.0.x: Error 306 -
pls could somone help
I tried to redeem an iTunes gift card and it said that my card has not been properly activated
YvesolutionWhat you normally should do when you have an iTunes card that has not been activated is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. If they refuse to help, as some retailers do, or you don't know or can't get to the retailer, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store. They will ask for a scan of the front and back sides of the card as well as a scan of the receipt
Regards. -
Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.) I gave the Airport a hard re-start, so I don't think that is the issue. Using Windows 7 Ultimate
Looks like I fixed it., thanks to another post I read. I went into my Norton Security. Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow" This also fixed my error (-3212) which would not allow me to connect to the iTunes store.
-
I upgraded my iPad (3rd gen) to iOS 7. When I go to iTunes and look at the summary and to the "Apps" list tab, iTunes stops working and shuts down. What can I do? I am using a Windows 7 machine.
Hi thanks for the encouragement. It's not that the severs are "swamped", iOS 7 has been successfully installed.
I can't access the apps list in iTunes because it *****
down. Its pretty frustrating because many of my apps require me to manually transfer files into iTunes first to view
them. Not sure if the servers being swamped is an issue for me, unless they release a bug fix through another version of iTunes.
Has anyone else had this problem? My iPad is pretty useless unless I can access my app list in iTunes.... -
I had an Aiport Base Station and extended using Airport Express, where I also connected my printers (network). Now using Airport Extreme off Mt Lion 10.8.4 and Utility 6.3.
I can't extend the network (express) or connect my printers (USB) nor will it find my one wifi printer.
What's up?For now, leave the AirPort Express powered off.
Power off the entire network....all devices.....in any order that you want
Wait a few minutes
Power up the modem first, and let it run 2-3 minutes by itself
Power up the AirPort Extreme next, and let it run a full minute
Keep powering up devices one at a time about a minute apart until everything is powered up (leave the Express off for now)
Open AirPort Utility and check to see if the AirPort Extreme is visible.
If it's not, click the AirPort Utility menu at the upper left of the screen, then click About AirPort Utility. Post back with the version number of AirPort Utility that you see there....which should be AirPort Utility 5.6.1.
Post back on your progress. -
I have applied to the iTunes affiliate program and received my affiliate token successfully. However, I want to use the web iMix, however I need a web developer identifier and secret phrase. I can't reach the web i mix affiliate program! Can anyone help??
You can find the full description here: http://www.apple.com/itunes/affiliates/resources/documentation/itunes-store-web- imix.html
I have sent an email for weeks now to the e-mail shown here http://www.apple.com/itunes/affiliates/resources/ and haven't had a single response from them. PLEASE HELP!!
Thank you!Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
2 macs, one sees Express in Itunes and one won't see remote speakers
I have a mac mini connected to D-Link router via ethernet and it always sees my remote speakers in Itunes. So I know my airport express hase successfully joined my network. But my Ibook rarely sees the remote speakers in itunes. Sometimes it will if I have itunes running on my mini. I always have a green light and the mini always sees the speakers. But the ibook only intermittenly sees it. Any help? my versions of itunes are updated with every new update and are current as of 1 August 2006
Had same problem and went through an hour-long diagnostic with Apple support, reinstalled all software etc. After sitting and thinking about it, I removed the security from my wirelessrouter, made sure all wireless devices had the same WEP key and then restarted WEP security on the router. Instant fix and praobably didn't need all the wasted time on re-installs !!
Geoff -
After upgrading to lion my internet usb key is not able to connect anymore.can anybody help me?
after upgrading to lion my internet usb key is not able to connect anymore.can anybody help me?
If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Itune on iMac cannot connect to Airport Express, but Itune on XP can
Hello
I've the following situation:
Itune cannot see the Airport Express unless my Iphone Remote controle is connected to Itune. And eventhough, Itune fails to connect to it.
Here is the environment of my network
1) third party LAN/Wireless router (connected to the internet)
2) iMac (10.4.11) connected via the LAN port to the router
3) Airport Express (7.3.2) connected to the wireless network
4) one Iphone connected to the wireless network
5) one XP computer connected to the wireless network
6) All devices are in the same subnet
What really puzzle me is that Itune on the XP laptop can broadcast music to the Airport Express without any issue. But Itune on the Mac does not see at all the Airport Express unless I connect my Iphone to Itune. When I do so, the Airport Express become listed in the status bar of Itune. But if I try to make Itune connect to it, it try for a while then it stop trying without any error message.
I really don't understand what is going on. Does any body can give my a bit more information how Itune and Airport Express communicate? Or have any idea where I should direct my troubleshooting?
Thanks in advance for any helpSo did i screw something up last night when i connected using my PC?
That sounds likely. Maybe the security type or password?
And if so how do i re-set the link with my mac??
Try the options described on pp. 30-33 of http://manuals.info.apple.com/enUS/AirPort_Express_SetupGuide.pdf
Once you get things working again, suggest you save the settings in a profile. In future when you bring the PC home, create a different profile for experimentation. Switch back to the usual profile when you're done with the PC. Eventually, you should be able to develop one profile that works with both machines. -
ITunes update no longer connects to AirPort Express
Sympton exists on both iMac and iBook even after permissions updated with Disk Utility. Anyone have any thoughts?
I am using Airport Express also but have not had any trouble with the iTunes 6.0.4 update. Is your AE firmware up-to-date? Try resetting the AE (look in Airport Help for instructions) You may want to post to the Airport Express discussions. Good luck.
Maybe you are looking for
-
Urgent Help needed? Slow browse & download?
Hi, THanks for clicking on my post. I am having this STRANGE problem, I am getting extremely slow download and youtube video speeds, the videos are very choppy, the download speed drops and almost every 2-3 seconds, takes forever to download. There i
-
I have an Ipad2 and have tried severally to re-add my hotmail account but couldn't. In collaboration with Apple personnel today (10/17/2012), we routed the Settings and General via the home page but solution appears elusive. I can't get pass "Unabl
-
My iPod says 20%, and when it's at 10% says it's at 20%.
This has been happening since last year. Every time my iPod Touch 4g is at 20%, it's at 20%, but when it's at 10%, it says 20% battery remaining. (It's an OCD thing)
-
Trouble accessing dynamic XML from API with a CFC
Please see my example at http://67.199.18.39/test.html and view source (to big to post here). I am returning XML from a dynamic call to an API through a ColdFusion CFC. Search for something generic like Dog. Click Go. I display the XML for you to vie
-
I have "downloaded" a trial version of Elements 13. A window headed ADOBE DOWNLOAD ASSISTANT comes up and after sometime when the blue progress bar reaches the end a message "download completed" is displayed under the blue progress bar. This window s