Itunes 10.4 doesnt recognize devices. nothing shows up. Cant sync

just downloaded itunes 10.4 last night due to me getting a new iphone 4 and it needing to be the latest itunes
when plugging in any device it doesnt show up : (
at all
nothing
no icon
nothing
the computer recognizes something getting plugged in and the box comes up saying that i can print my photos off
but itunes doesnt
help ??
how do i fix this quickly ???

I am having similar problems after clicking yes when Software Update advised I needed OSX & iTunes update. I'm running Snow Leopard, and now I cannot open iTunes, run  iTunes on my computer, siync my iPod, anything. I wish I had NEVER clicked yes...

Similar Messages

  • HT4623 e while updating iOS. When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    iPad 2 froze while updating iOS 7.0.4.  When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    Sorry if we didn't get to your question fast enough; we are all volunteers doing this in our spare time. Try the steps in this article. If you're unsuccessful, you'll need to take your device to the Genius Bar for an evaluation.
    http://osxdaily.com/2010/12/04/ipad-dfu-mode/

  • HT1212 itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the scree

    itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I have a new iphone5. I can not get my itunes to even SEE the device. How do i sync?

    I have a new iphone5. i can not get itunes to even SEE the device. How can i sync?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • HT204150 i set up an icloud account for my mother in law and when she sends emails it says they have come from me, despite me never entering my details.  On icloud and itunes her account doesnt have my name ,so, i cant remove it! Help!

    i set up an icloud account for my mother in law using my mac and when she sends emails it says they have come from me, despite me never entering my details.  On icloud and itunes her account doesnt have my name ,so, i cant remove it! Help!

    Look in Mail Preferences>Accounts, the Full Name field.

  • I tunes doesnt recognize devices on windows 8

    I Connect my iphone & my mini ipad to thenew red itunes on windows 8 & it doesnt recognize both
    any suggestion ?

    Hey there amirabicha,
    If neither of your two devices are recognized in iTunes on your PC, I would recommend you use troubleshooting in the following article, named:
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • My itunes no longer picks up my ipod so i cant sync it help?

    My itunes wont pickup on my ipod so i cant sync it help?

    Lauraipod wrote:
    Windows
    Everything is updated and i have the latest version of iTunes. So i have no idea why its not working...
    Thanks for the extra Info...
    Try here  >  http://support.apple.com/kb/TS1538
    And / Or here >- http://support.apple.com/kb/TS1369.

  • After updating and installing an icloud update for my 4th gen itouch, itunes crashed and doesnt recognize my new iphone, or any of my previous devices.  All of my songs are gone too.  How do I restore my itunes back to the way it was?

    Please Help.  Has anyone else experienced this crash? I spoke to support, and they hinted that this might be a common problem.

    The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
    The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
    This is designed to be done right away with a new iPhone.
    If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

  • Changed the battery in my ipod touch.  now the only thing it does is shows the apple logo.  tried the resets,  tried to go through itunes.  computer doesnt recognize its plugged up

    i just installed a new battery into my wifes ipod touch.  after charging it all night,  all it will do is show the apple logo.  ive tried reseting,  ive tried going through itunes.  doesnt respond to either. the computer doesnt even reconize that its hooked up.  please help me.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Iphone 4 stuck in recovery mode and itunes doesnt recognize device

    IPhone 4 Is stuck in recovery mode.  But when I plug in to my computer, iTunes doesn't recognize any device connected.
    I was having some issues with it, then decided to update, that's when it locked down,

    Hello, MA80. 
    Thank you for visiting Apple Support Communities.
    Here is an article that I would recommend going through when experiencing this issue.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    If you receive a specific error code when you attempt to restore, try the steps in the article below.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694
    Cheers,
    Jason H.

  • Creative Soft. doesnt recognize device, Windows Media Player does.. please he

    I used the "Removable Storage" function to transfer a .doc file between my computer and another. Later, I wanted to organize the music already on the device using Zen Micro Media Explorer, but this program, nor Creative Mediasource, etc, recognized the device as being plugged in. At that time, I was not even in "Removable Storage" mode anymore, I even disabled it completely to see if that did the trick. Windows Media Player does recognize the device as being plugged in, and the device's LCD screen also displays it as "Docked".
    What do I do? Please help me.

    bananazebra,
    If you're using firmware 2.xx.xx then the primary application to sync with the player will be Windows Media Player 0. If you wanted to use MediaSource or Media Explorer then you will either need to download the Creative MediaSource Plugin for PlaysForSure devices or the correct Media Explorer that support PlaysForSure devices. Both are available at the download page.
    Jason

  • ITunes 8.1 doesnt recognize iPod Touch

    Ever since I upgraded my itunes to 8.1 it doesn't recognize my ipod. I even plugged in my friends ipod touch and it doesn't recognize his either. I have uninstalled itunes and reinstalled numerous times. restarted my cpu. shut it off for a day, but it still wont recognize the ipod. any help is much appreciated.

    OK so i am in the exact same boat as you guys.....I also upgraded to the "latest and greatest" and got stuck with a version of iTunes that wont see my iPod Touch...I have tried
    uninstall then reinstall
    disconnecting internet cable before plugging ipod in (saw tht somewhere,,not to much hope)
    Going into msconfig and shutting down all possible conflicts
    Turning off any and all antivirus, internet filtering, and firewall software
    Putting iPod in DFU mode
    Restoring on other computer than connecting
    Reseting ipod
    I am completely at a loss and would love to use my iPod again
    I am really hoping apple will fix this before i give up....
    Ben

  • I can change the name of my music, the names of albums and stuffs in my itunes.. but in my iphone nothing change after the sync ..; What should I do? HELP!

    (Sorry about the bad english!)

    If you had "Find My iPhone" enabled in Settings > iCloud then you may be able to locate it. If not, you cannot locate it. If it was enabled then you can try locating it via http://icloud.com on a computer or the App "Find My iPhone" on another iDevice. Note: this will only work if your device is connected to a network and the device hasn't already been restored as new and/or "Find My iPhone" has not been disabled on it. Note: Disabling "Find My iPhone" is much more difficult in iOS 7.
    If you think that your device was stolen rather than lost then you should report it to the police. In either case you should contact your carrier, change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
    See also here for additional information: http://support.apple.com/kb/HT5668

  • I tried to change the name of my device and now I cant sync anything and it says there is a problem with the disk and when I changed the name back it still said the same thing so I restored my ipod (not from itunes but on the ipod itsself)

    And now its saying my ipod is corrupt. None of my stuff was erased from itunes it was only erased from my ipod so why am I not able to just sync everything back onto my ipod? why is it doing this now? I think this is ridiculous that just changing one name would do this much damage.

    There is a backup plan after doing the Restore.  Read this.

  • ITunes 8 does not recognize Outlook is installed - can't sync contacts

    4GB nano model A1236
    in iTunes, click on iPod in left panel, click on "Contacts" tab in main panel
    top half of panel titled "Con...[tacts]" has message "Microsof Outlook or Outlook Express must be installed in order to synchronize contacts" and bottom half of panel titled "Cale..[ndar]" has message "Microsoft Outlook mut be installed in order to synchronize calendars"
    I have Microsoft Outlook 2003 (11.8118.8221) SP 2 installed. Not running cached mode.
    What is the problem?

    Hey papalia,
    Welcome to the forums.
    Have a look at this article regarding your issue.
    Microsoft Outlook is unavailable as a translator when synchronization options are configured on the ...
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • Trying to install itunes onto a new laptop - stalling

    hi really looking for help here!!! not extremely technical but i'll give it my best go.... i'm trying to install itunes onto a new laptop its a compaq with windows 7. it belongs to a friend and it never had i tunes on it before. i have tried download

  • Can't start Photoshop without deleting preferences file

    Hi gang, I have a Macbook Pro running Lion, OS X 10.7 that I purchased two months ago so it's relatively new. Just bought Adobe Photoshop CS5 Extended and installed it on the computer a day ago. Software will not operate unless I hold option+command+

  • How to remove namespace Prefix ns0

    Hi , I receive an xml from an external service.In that each element in prefixed by namespace ns0: How can I remove that name space.I trieed using ora:ProcessXSLT.But its not working.Its giving TypeError Please find below my xml and xslt files. XML --

  • Can't get ipad to turn on

    Can't get my ipad to turn on

  • Creator 2 + db4o(OODB)

    Hi, I'm working in a web project using Sun Java Studio Creator 2 I want to use DB4o(OODB) like my database, but I have a problem that is: the Creator or the sun-appserver-pe8.1_02 are blocking the access to the database file, I can't read and write o