Itunes 10.4 fails to install on lion

After I installed Lion on my MacBook Pro, I tried to install itunes, Software updates, or iwork updates nothing works, any help is appreciated

I have the same F***ing problem!!

Similar Messages

After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

Itunes sync 'AppName' failed to install.

I dont understand why i get this sometimes when trying to sync an app to my device (message shows on device itself)
certain provisioning profiles just dont work. I will usually fumble around, creating new ones until i get one to work.
The latest attempt:
I created the provisioning profile on the iOS developer site.
I included 2 udids.
downloaded
I created the app, it works on one device, but not the other
itunes sync 'AppName' failed to install.
ok, let me test again, so i go create a new profile for just one UDID (the UDID that was working a moment ago)
itunes sync 'AppName' failed to install.
What!!! WHY!
Its like some profiles are corrupt or something? What can i be missing here?
for one example, both udids are in the profile, why would the .ipa install on one, but not the other?
(installing from 2 different comptuers)

Any suggestions you can think of? I have now lost all ability to test the app even on my own device. It seems to provisioning profiles are the cause?
with itunes, the device itself gives the unhelpful error itunes sync 'AppName' failed to install.
with the iphone configuration utility, the program errors:
Could not install the application on device. Error: A valid provisioning profile for this executable was not found.
I dont understand, this has been working for months and now it does not.
When i try to install the application, the provisioning profile shows up on the device and states its valid.
I am now starting from scratch again from the iOS provisioning page, but it will not work at all this time.
desciption: [a name i put]
bundleSeedID(app id prefix)
i have only a choice of two or "team id"
budle identifier (app id suffix)
i had always used the wild card *
this worked in the past, now i have tried creating provisioning profiles this way, or with a valid name and using the same name in app id export settings in flash Ide
new profile
name myProfile
[certificate selected]
app id
[selected the app id i just made]
device selected, UDID is correct and worked for months prior
wait/refresh
download profile
create the app in flash CS5.5
app ID = anything because i used the wind card, OR exact same as app ID created in iOS page
its created successful, but fails to install on device.
Any suggestions are welcome, i am now spending hours on this its ridiculous

Itunes sync (whatever) failed to install, for all applications - help!

Today I attempted to sync my iPhone 3GS with itunes 3.6.3 (windows) and almost no apps will update or install, including existing ones and new ones. When itunes first came up, it asked me to re-authorize my computer even though this is not a new computer, new iphone, or new itunes library. I re-authorized anyway and it told me that the computer was already authorized. Things I've tried so far: rebooting the iphone, restoring from backup, resetting the iphone to factory settings and reinstall, deauthorizing and reauthorizing the computer, purchasing a new app, all to no avail - new applications fail to install, old applications (as a result of restore) report failure to sync and are removed from the phone. The bottom line is that my iphone appears thoroughly unable to sync any longer. Any advise would be much appreciated.

More information. ITunes error log reports:
The app "(whatever)" was not installed on the iPhone "iPhone" because an unknown error occurred(0xE80000004)
for all add-on apps (e.g. those not installed on factory install), including apple applications.
All such apps on the iphone are stuck in "waiting..." state. Manually deleting them off the iphone and reinstalling via the iphone app store will install them. Interestingly, sometimes it takes multiple tries to delete the apps.
Anyone?

XCODE 4 fails to install in LION

I did a fresh install of Lion using the rescue usb disk and it seemed to be going well until I downloaded XCODE 4 from the App Store. The program fails stating I need to contact the Developer.
I'd appreciate some help understanding what I need to do to get XCODE working.
Here's the output from /var/log/install.log
Aug 30 17:36:18 Horsts-MacBook-Pro installd[898]: PackageKit: Extracting file://localhost/Applications/Install%20Xcode.app/Contents/Resources/Packages/D eveloperTools.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Aug 30 17:36:27 Horsts-MacBook-Pro installd[898]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “OpenGLApps.pkg”." UserInfo=0x7faf0b453690 {NSLocalizedDescription=An error occurred while extracting files from the package “OpenGLApps.pkg”., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, NSURL=file://localhost/Applications/Install%20Xcode.app/Contents/Resources/Pack ages/OpenGLApps.pkg, PKInstallPackageIdentifier=com.apple.pkg.OpenGLAppsLeo, NSUnderlyingError=0x7faf0b439810 "The file couldn’t be opened because it isn’t in the correct format."} {
            NSFilePath = "/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root";
            NSLocalizedDescription = "An error occurred while extracting files from the package \U201cOpenGLApps.pkg\U201d.";
            NSURL = "file://localhost/Applications/Install%20Xcode.app/Contents/Resources/Packages/ OpenGLApps.pkg";
            NSUnderlyingError = "Error Domain=NSCocoaErrorDomain Code=259 \"The file couldn\U2019t be opened because it isn\U2019t in the correct format.\"";
            PKInstallPackageIdentifier = "com.apple.pkg.OpenGLAppsLeo";
Aug 30 17:36:27 Horsts-MacBook-Pro installer[895]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “OpenGLApps.pkg”." UserInfo=0x7f9f734b3840 {NSUnderlyingError=0x7f9f734b3880 "The file couldn’t be opened because it isn’t in the correct format.", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, NSURL=file://localhost/Applications/Install%20Xcode.app/Contents/Resources/Pack ages/OpenGLApps.pkg, PKInstallPackageIdentifier=com.apple.pkg.OpenGLAppsLeo, NSLocalizedDescription=An error occurred while extracting files from the package “OpenGLApps.pkg”.}
Aug 30 17:36:28 Horsts-MacBook-Pro installer[895]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.

I deleted "Install XCode" from /Applications then opened App Store and downloaded XCode4.1.1 again. I tried the install process again and it completed successfully. Why the download from 2 days ago failed to install properly, I haven't a clue? Nevertheless, I have a working XCode and for that I am grateful.

Itunes latest update failed to install

Latest update failed to install.
Loaded manually.
Now won't run at all...
HELP....

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Another "itunes Sync *app* Failed to install" thread

Hi,
I am having some major provisioning problems, and i dont want to hijack the other thread.
My Macbook Air crashed after trying to install a thunderbolt driver in July and i lost my dev environment.
I reinstalled OS, downloaded my sources and i can debug the SW in the emulator.
But i can no longer get it to install on any device. I have tried both a iphone 4 and an ipad 3.
environment:
osx 10.8
Air 3.4b2
xcode 4.4.1
IOS 5.1.1
IOS language:Swedish
After reading the forum and pretty much half of the internet today I have tried the following.
1. I revoke all certs in apple developer portal
2. i remove all mobile provisioning files
3. I export a cert request from Keychain access. ( Shall i export a special Key?, I export without having chosen a specific key in Keychain access)
4. I use the certsigningrequest to create a new development cert.
5. I download the new cert, doubleclick it and export a .p12 file by chosing Keys-><my name>->privatekey->export.
6. I create a new mobile provisioning profile file in the portal chosing my full Appid 5625GW2MUW.com.elsheep.parken.MobileClient.
7. I download this file, and drag it to itunes.
8. i compile my .ipa using the exported .p21 file and the dev provisioning file.9. i install the .ipa in itunes by doubleclicking on it.
10. I synk the file onto my ipad.
and it bombs.
Should i be able to install a file with development cert/profile, or do i need to use an ad hoc one ( I have tried this and i get the same fault.)
xcode clains that the provisioning pofile is valid
Using iphone configuration utility i can see this in the ipad log:
Aug 16 22:07:50 unknown installd[733] <Error>: 00485000 verify_signer_identity: Could not copy validate signature: -402620393
Aug 16 22:07:50 unknown installd[733] <Error>: 00485000 preflight_application_install: Could not verify executable at /var/tmp/install_staging.izD4mc/foo_extracted/Payload/Parken.app
Aug 16 22:07:50 unknown installd[733] <Error>: 00485000 install_application: Could not preflight application install
Aug 16 22:07:50 unknown com.apple.itunesstored[746] <Notice>: MobileInstallationInstall: failed with -1
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Aug 16 22:07:50 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: MultitouchHID: device bootloaded
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: MultitouchHID: detection mode: 0->0
Aug 16 22:07:51 unknown kernel[0] <Debug>: set_crc_notification_state 0
This is truly driving me crazy.
Does anyone have any good ideas? the .ipa is quite large, 123 MB as I have included a lot of assets ( it is an art/photo app). COuld this be a part of the problem?
regards,
/Lars

Hi,
I am using Flash Builder, so that should be ok.
I have now succesfully build and deployed another app using the same .p12 file and a mobileprovisioning file based on the same certificate.
I will try to remove the assets from the IPA to see if it might be a size issue, as that is the major difference from the last version I had that worked before the crash.
/Lars

Itunes 9.2 Fails to Install

Why is it that everytime that i install itunes 9.2 it falils at moving items into place I downloaded it manually off apple and still does not work and i also tryed on how to fully remove itunes but that did not work either
Message was edited by: shadowkiller

I don't know if I should start a whole new thread, but essentially I am having the same problem. Yesterday, iTunes 9.2 began to hang while loading, and it kept bringing the whole system down. I ran disk utility, tried starting the Mac in safe mode - nothing worked. So I trashed iTunes, downloaded the standalone installer, and it just will not work. It gets about halfway through the Activation phase, and then says that the installation failed.
I've also tried unintalling iTunes completely via instructions from Apple. I've run Disk Warrior and rebuilt the desktop several times. I've trashed the installer and downloaded a fresh copy. Nothing I've tried seems to work. I've made sure that iTunes Helper process isn't running, and that it's not in my startup items. My patience is growing kind of thin. Other than wiping everything out and starting from scratch, I don't know of any other fix. I would really hate to have to start from scratch. I would really appreciate some guidance to get this problem fixed. It's extremely frustrating.

Itunes 10.4 failed to install

Windows 7 32 bit.
itunes checks to determine there is a new update to install. everytime i try to install, the updates download but the install fails.
i have tried to install using the download only method and manually installing, this has worked in the past with random failures.
How do i install and what is causing this to faileach time?

me too did you get any help?

AIR Installers fail to install on Lion 10.7

This happens every time, including trying to install the older versions. I've removed everything, tried chmod 777 my app folders, etc. nothing works. Ideas?
1/30/12 4:27:00.445 PM Adobe AIR Installer: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.7.2 x86
1/30/12 4:27:00.445 PM Adobe AIR Installer: Commandline is: -psn_0_1470823
1/30/12 4:27:00.445 PM Adobe AIR Installer: No installed runtime detected
1/30/12 4:27:05.099 PM Adobe AIR Installer: Relaunching with elevation
1/30/12 4:27:05.100 PM Adobe AIR Installer: Launching subprocess with commandline /Volumes/Adobe AIR 1/Adobe AIR Installer.app -ei
1/30/12 4:27:07.147 PM authexec: executing /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer
1/30/12 4:27:07.393 PM [0x0-0x167167].com.adobe.air.Installer: 2012-01-30 16:27:07.391 Adobe AIR Installer[11948:20b] In modifyShouldRestoreOnRelaunchCounter, _LSSetApplicationInformationItem(_kLSPersistenceSuppressRelaunchAtLoginKey) returned error 268435459
1/30/12 4:27:08.052 PM Adobe AIR Installer: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.7.2 x86
1/30/12 4:27:08.052 PM Adobe AIR Installer: Commandline is: -ei
1/30/12 4:27:08.052 PM Adobe AIR Installer: No installed runtime detected
1/30/12 4:27:08.071 PM Adobe AIR Installer: Error 0xfffffda8 (-600): CGSSetHideOnDeact: error retrieving current process
1/30/12 4:27:08.071 PM Adobe AIR Installer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/30/12 4:27:08.107 PM Adobe AIR Installer: Launching subprocess with commandline /usr/sbin/chown -hfRP duane "/Users/duane/Library/Application Support/Adobe"
1/30/12 4:27:08.107 PM Adobe AIR Installer: Launching subprocess with commandline /bin/chmod -fRP +rw "/Users/duane/Library/Application Support/Adobe"
1/30/12 4:27:08.107 PM Adobe AIR Installer: Launching subprocess with commandline /usr/sbin/chown -hfRP duane "/Users/duane/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/bin"
1/30/12 4:27:08.110 PM Adobe AIR Installer: Starting silent runtime install. Installing runtime version 3.1.0.4880
1/30/12 4:27:25.753 PM Adobe AIR Installer: Registering /Applications/Utilities/Adobe AIR Application Installer.app/Contents/Info.plist
1/30/12 4:27:25.766 PM Adobe AIR Installer: Got an unexpected fatal error while modifying plist: Error: Failed to register application (-10822)
1/30/12 4:27:25.767 PM Adobe AIR Installer: Error occurred during register filetype operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Failed to register application (-10822)" errorID=0]
1/30/12 4:27:37.214 PM Adobe AIR Installer: Rollback complete

Sorry you're running into this problem. After searching for this error (10822) it appears that it might be related to OSX's launchd service. See these discussion threads:
Error code 10822
Are you able to install other software besides AIR?
Chris

Lion Problem, failed to install mountain lion

Hello guys, i'm using Macbook Unibody late 2008 with intel core2 duo 2.4 Ghz
Currently i'm running on LION OSX, and i want to upgrade my OS to Mount Lion.
In the middle of the installation i found a trouble, after the macbook restart. The installation process still goin well, until 2/10 of the installation bar progress a notification shown up. It say installation failed, no - recovery blah blah blah found. I'm confused how to solved this problem, is there anyone can solve the problem yet? i'm already try all kind of the solution posted in the discussion first, but still it fails.
My macbook using a 250Gb harddisk, with arround 200 Gb for Macintosh HD and 45 Gb for Windows XP Bootcamp.
oh yeah, this is the result of diskutil list command in terminal
r********s-macbook:~ riz*******ru$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *250.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Mac HD                  203.5 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data BOOTCAMP                45.7 GB    disk0s4
ri**********s-macbook:~ ri******ru$
Thank you

OS X Lion: Installer reports "This disk cannot be used to start up your computer"

Itunes Sync *app* Failed to install

So I have been trying to troubleshoot this issue for about a week. I have tried everything I can think of, but I cant seem to find a way to get the app I made to load onto my iPad. Is there some sort of foolproof procedure I can follow? I have been using this site http://www.lynda.com/Flash-Professional-CS5-5-tutorials/Building-Mobile-Apps-for-Multiple- Devices-with-Flash-Professional/89049-2.html but I still am not able to get it to install. Any suggestions/help would be greatly appreciated!!

Sorry about the wait guys, I am currently deleting every old certificate, device, and everything else. I decided to start from scratch so that you guys will be able to tell me what I may be doing wrong.
Step by step, here is what I have done so far.
I went into my provisioning portal and got rid of everything, So I am starting fresh.
1. Generated a certificate signing request using the keychain access
     -oscp and clr set to off
     -requested a certificate from a certificate authority
     -saved to desktop
2. Took the CSR file and went into the certificates tab of provisioning portal
     -clicked request certificate in the development tab
     -on the Create iOS development certificate screen, I found my CSR and selected it
     -I then clicked submit and refreshed the Certificate page so that it is approved
     -Downloaded the developer certificate and saved it to my desktop
3. Opened up the keychain access and went to File | Import
     -Took the new .CER file which is the developer certificate and imported it
     -Right clicked the newly added PRIVATE key in the keychain access and clicked Export
     -Saved the Exported file to the desktop, the file is a P12
     -Gave the P12 a password while saving, verified with admin priveledges.
4. Went back to the provisionong portal and went to the Devices tab
     -Clicked Add device in the Devices tab
     -Connected testing device in iTunes and copied the UDID
     -Gave the device a name and pasted the UDID into the device UDID box
     -Clicked submit at the bottom of the page to register the device
5. Went to the App ID Tab of the provisioning portal
     -Clicked the Manage tab and clicked New App ID
     -On the Create App ID page, entered "General Development" into the Description field
     -Entered "*" into the Bundle Identifier to create a wildcard App ID
6. Went to the Development tab in the Provisioning Profile
     -Clicked on New Profile under Development Provisioning Profiles
     -On the Create iOS Development Provisioning Profile page, entered my name i the Profile Name field
     -Checked the appropriate checkbox for my Development Certificate
     -Selected the "General Development" App ID from the dropdown
     -Checked the box next to the Device Name I recently added
     -Clicked the Submit button, Refreshed the page so it was active
     -Downloaded the Development Provisioning Profile onto my Desktop
And THAT is where I am now. Before I go any further, can I get some feedback on those steps? Did I miss any? Was there a preference I should have selected that I didnt?
Thank you very much for taking the time to read all that, Its quite a bit!

Itunes 10.7 fails to install~

when trying to uninstall 10.7..."feature trying to use is on a network resource that is unavailable" (while upgrading)

That's perfect, thanks.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

ITunes 12.1 fails to install

App Store has now automatically ‘updated’ iTunes to 12.1 several times, completely clogged the hard drive, and another is waiting to be ‘updated’. When opened the error code 13014 is displayed.
How do I get out of the loop and regain hard drive space?

I have seen question or two on this recently recently, but don't know of resolution, Click Here
ÇÇÇ

Itunes Error 42404- corepf.pkg install fail

The Corepf.pkg in the itunes installer is failing to install, causing me to not be able to authorize my itunes account and preventing me from installing apps on my iphone and playing downloaded music. The pkg gets about 80% of the way through the install process. The error message states "The installer could not install some files in "/." I've tried reinstalling itunes and fixing disk permissions to no avail. Any thoughts?

I have exactly the same problem. I had a support store reinstall all my software after my computer crashed. I now have iTunes 8.2.1 and Quicktime 7.6.2 which as far as I can tell are the most current available. But when I try to play EITHER my own purchased downloaded music OR samples from the store, I get the message "We could not complete your iTunes store request. A required iTunes component is not installed (-42404). There was an error in the iTunes store. Please try again later." I've been trying again later for 2 days but no luck. I repaired all permissions, re-installed Quicktime, and tried every other hint I could find online. Help!

Itunes 10.4 fails to install on lion

Similar Messages

Maybe you are looking for