ITunes 10.4.fails to launch, (mac OS10.58), error 13001

Hi, I'm a newbie to these forums.
My iTunes 10.4.1 fails to launch, (mac OS10.58), error 13001.
Fault appears specific to my user account.I want to fully uninstall every itunes related software component, then re-install.
Where can I find reliable extensive instructions for full uninstall?
My web searches have not located an accurate/extensive support page, but I'm sure such information has been posted before.
Previous uninstall/re-install attempts have failed, I suspect due to overlooked iTunes related files remaining in the system.
Have given up trying to correct the fault many times before, after too many wasted hours.
I have not been able to synch iPhone since some time in 2010, when the error first presented.
Now I need to unlock iPhone to migrate to another network, which requires use of iTunes.
Any expert advice would be appreciated!
maker_au

Hi Folks,
Moving the iTunes app as suggested above did not solve the problem for me. However, a post in another discussion suggested:
first deleting the iTunes.app file from the applications folder
then downloading & reinstalling a fresh copy of iTunes from:
http://www.apple.com/itunes/download/
I tried this suggestion and found that deleting the app & reinstalling a fesh copy did solve the problem on both of my affected systems. (I backed up my iTunes library beforehand to be safe, but my iTunes library was unaffected by the reinstall.)
Hope this works for you. Good luck!

Similar Messages

Quick Time (Audio Preferences) fails to launch with buffer overrun error

It all started a few weeks ago, after installing itunes7.0 for windows, and itunes began to annoy me (indeed drive me mad) with an error message :
"an unhandled win32 exception has occured in itunes.exe [3840]" at startup / closing immediately afterwards.
After numerous uninstall/reinstall/clean the registry/system restore attempts I managed to solve the issue-- BUT only for a few days..It failed again and so I went through the itunes support forums even found an entry
"iTunes 7 for Windows: iTunes fails to launch with an unknown error"
which suggests that my issue could be solved by :
"Open the QuickTime control panel and select the Audio tab.
In the Devices section de-select the Safe mode (waveOut only) option and click Apply."
But to my surprise, when i selected the Audio tab (and the Audio tab ONLY ) it presented me a "buffer overrun error" which indicated that the internal state of the program has been corrupt and it would be shutting down now..
It's such a nuisance..!!
Please, help, and your help will be deeply appreciated... !
I have tried to revert to the older version and it didn't work..

let's try swapping out your existing QuickTime one more time. we'll take a few additional explicit precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

HT1349 my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll" then another window will come up telling to to uninstall the apple mobile and

my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll" then another window will come up telling to to uninstall the apple mobile and itunes and reinstall them? will this delete everythin in the itunes account? please help

This might help https://discussions.apple.com/thread/5821701

ITunes fails to launch; Mac Book Pro; Mac OS X 10.6.8;Tried everything so far; NOTHING WORKS. Help!! Desperate!

I'm on a Mac OS X 10.6.8 and all of a sudden one day my iTunes failed to launch. The problem has persisted for months now--I've tried reinstalling, updating all software, removing all music files (which I backed up), I tried Safe Launching it--NOTHING WORKS. Help!! I'm Desperate!
I was existing with my iPhone which is my main music player anyway--and I lost it in a cab yesterday! I need to sync everything (thanks to iCloud most of it is taken care of contacts and calendar wise) and I'm sort of losing hope that this issue can be resolved with the iTunes...
Anyone ever experience this?
Any help is so greatly appreciated!

virendrapatidar wrote:
Are you 100% sure that the HDD is totally damaged and there is absolutely no way to recover DATA at all???
Actually the drive might be working fine and there could be a Mac hardware, boot sector malware or cable issue at fault, that can't be determined until the drive is removed from the Mac and a SATA to USB adapter cable used to another Mac, PC or Linux machine.
Even if the file structure is defective there is Data Rescue type software that can read the 1's and 0's of unencrypted data directly off the drive.
If your data is really valuable and worth more than a few thousand dollars, there is Drive Savers which will physically dissect the drive and read the platters directly if the above method fails.
Is it possible.. if I take out the HDD and connect it to some other PC as standby and copy data.. may be its booting section got damaged and it cant boot but it may detect and allow me to copy my data when standby?
Yes it is possible, a piece of software called MacDrive can be installed on the Windows PC and used to read the HFS+ format of the Mac boot drive.
Linux also will read HFS+ format and also fix a lot of problems with drives to get them working.
I suggest you take your Mac to a Linux level geek first to do a hardware evaluation of the drive, a passive image of the drive if it's working so you can later use Data Rescue (no encryption/Filevault) yourself as it takes hours.
If the drive isn't working physically, then consider Drive Savers if you want to part with a few thousand and the drive is not encrypted/Filevaulted.
Forget Apple and many of their type repair shops, they usually don't/won't/can't take the time and just replace your drive and tell you tough luck you should have backed up.
My computer is not working, is my personal data lost?

Fail to launch Mac 10.9.5

Skype fails to launch on Mac OS10.9.5.
!. Deleted all Skype files, including all Library files
2. Reinstalled 7.7.335
3. Not running any conflicting plugins
HELP!
FirstAid Report attached.
Attachments:
Skype_2015-04-27-111225_Phil-Feldmans-iMac-Computer.crash ‏42 KB

What's the specific application? It may just be too old to run on a modern OS - have you tried checking the vendor's website for an updated version?
Matt

ITunes and Quicktime fail to launch

basicaly i installed a codec pack onto my computer and now itunes or quicktime wont open , i get the usual "QuickTime Player has encountered a problem and needs to close. We are sorry for the inconvenience." or "Itunes Player has encountered a problem and needs to close. We are sorry for the inconvenience."
i have tried installing them separetly an uninstalling them separetly, i unistalled all the codecs that came in the codec pack an i ran a spyware scan and a registry cleaner an still the both fail to launch.
Help Me Please!!!

Have you had a chance to look at this troubleshooting page? It may be of some help:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues

ITunes/QuickTime Player Failes to Launch

I am wondering if downloading the latest update was a good idea. When I attempt to launch iTunes I receive the following error:
"iTunes cannot run because it has detected an problem with your audio configuration."
Havins seen some other posts make reference to QuickTime Player settings (granted they were for an older version of iTunes) I thought I would open it up and take a look around. When I did this it failed to launch and produced the following error:
"Runtime error. This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
Everything worked quite well before the software download. Anyhelp would be greatly appreciated.

yep, a problem with your QuickTime generally causes the "audio configuration" iTunes error. (itunes uses QuickTime for audio and video playback.)
the following document may be of some assistance:
iTunes 7 for Windows: iTunes had detected an audio configuration problem

Media Encoder Fails to Launch (Mac)

I sent three sequences to media encoder (5.5) from Premiere then looked for the Media Encoder window to start the batch (as usual) and it failed to come up.    I quit Premiere Pro, still no Media Encoder Window.
Rebooted the Mac and tried to launch Media Encoder from the Dock.   It loads the flash screen, tells me about loading the filters then appears to access something in the project folder (the path is too long for me to see what), hides the flash screen and ..... nothing.   Media Encoder is not responding.
I've tried reboot / restart several times and can't get past this.
How can I delete what ever job is keeping it from starting up?

Fixed it. For those searching in the future, hold down CMD+ALT_Shift while clicking on Media Encoder and it will delete preferences and allow Media Encoder to start up.   Phew!

ITunes 10.4 fails to launch in 10.6.8 ...

... and immediately displays the following error message:
...but there is no "Open in 32-bit mode checkbox" in the iTunes info window.
This has occurred consistently on a Mac mini & an IMac since the updates were applied but has not occurred on a MacBook Pro.
How can this problem be fixed? Thanks!

Hi Folks,
Moving the iTunes app as suggested above did not solve the problem for me. However, a post in another discussion suggested:
first deleting the iTunes.app file from the applications folder
then downloading & reinstalling a fresh copy of iTunes from:
http://www.apple.com/itunes/download/
I tried this suggestion and found that deleting the app & reinstalling a fesh copy did solve the problem on both of my affected systems. (I backed up my iTunes library beforehand to be safe, but my iTunes library was unaffected by the reinstall.)
Hope this works for you. Good luck!

ITunes 10.5 fails to copy new Podcasts / Unknown error occurred -69

I have upgraded to iTunes 10.5.0.142 and my iPhone to iOS 5.0
Since then I have downloaded Podcasts to thie Winows 7 Ultimate PC without problems... but I can't update my iPhone with any new Podcasts. My iPod Nano also fails. Each time iTunes tries to sync it (after a couple of minutes) displays the error message "Unknown Error Occurred (-69)" and then a new podcast is listed. If I delete this particular Podcast and attempt another sync, iTunes fails with the same message but (obviously) pointing a finger at a different Podcast.
If I untick all new Podcasts, the sync works perfectly.
I have ... reset my Ipod, reformatted it, deleted and re downloaded podcasts. I have also run a windows scan on the disk in question.
I don't believe in co-incidences and don't believe (a) my disk has un recoverable read errors for blocks downloaded since I upgraded to iTunes 10.5 nor (b) that both my iPhone and iPod have chosen this exact moment to die.
B u t ... my concern is... why isn't anyone else complaining about this issue?

I believe I have overcome the problem. I removed, re-downloaded and re-installed both iTunes and Quicktime. This allowed me to sync new podcasts downloaded after I did these re-installs.
This left me in the position that I could syn "old" podcasts, sync "new" podcats but the sync still failed on podcasts downloaded during the week bewteen the first installation of iTunes 10.5 and the re-installation... the un-syncables.
Here I just gave up: I deleted every podcast in this un-syncable group and re-downloaded them. Result? Happiness.
One other point: the un-syncable group podcasts took an inordinate amount of time after downloading while the screen displayed "Processing file". This could take (literally) a minute instead of the normal second.
While I realise it must be very difficult for Apple to debug a problem effecting half a dozen customers out of tens of millions, I think Apple could/should enhance the message "Unknown error -69" to better explain what has gone wrong and what should be done to solve the problem.

ITunes 10.3.1(55) on Mac showing 42408 error when iPhone 3GS is connected for syncing

I am trying to connect my iPhone 3GS to iTunes 10.3.1(55) on a Macbook pro but I am seeing the error "42408" and I am being asked to restore my iphone to factory settings.
Please help as I don't want to undergo the risk of losing all my data.
Thanks.

teefster,
not sure this helps; but, I've found that if the remote app doesn't connect I close it out (double pressing the home button and 'sliding up' the remote app (ios7)) Then when I restart the remote app - it seems to connect.
Same behavoir now on my iPad since I've update the remote app. Ironically itunes recognizes the ipad WITHOUT having to 'p'air it'! My iphone 5S must be paired to itunes =:0
now that all our iphones are on the most current version of ios7 and have the most current version of the remote app - the connect to itunes is now glitchy; but, still usable with the aforementioned work around. Ironcially, when either the ios7 OR the remote we just the most previous version they seemed to connect to my itunes without issue.
BTW - see this thread for help on down reving your remote app:
https://discussions.apple.com/message/23946928#23946928
Agreed Apple seems a little remiss in the supporting the backward compatibilty of the app.
thanks for taking the time to reply!

Itunes 10 fails to launch on MS XP

iTunes version 10 fails to launch on Windows XP home.
iTunes.exe appears in the task manager process list.
Have removed and downloaded version 10 serveral times without success.

Hello Limebluepink,
Have you tried this
Do the following:
Uninstall from Windows the following five programs in the following order:
iTunes,
Apple Software Update,
Apple Mobile Device Support,
Bonjour
Apple Application Support.
You do this from Control Panel > Add or Remove Programs (in Windows XP).
Restart your Computer after the Un-installation is done
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

InDesign Buttons Fail to Launch

I'm struggling with InDesign buttons. I am attemping to hide an answer under one button, and reveal it by clicking on another following these steps.
I created the No. 1 as the button to click and reveal the response to the right of it.
I created a text box for the text to the right of the No. 1
Created the larger text box half hidden by the photo I have pulled to the left, which will be revealed when the 1 is clicked
Created the photo as a "cover" over the text box
Clicked on the single line of text, created a button with the characteristics
on release
normal
clicked the check box "hidden until triggered"
Clicked on the large text box and created a button with the following characteristics
on release
normal
clicked the check box "hidden until triggered"
Clicked on the 1 and created a button with the following characteristics:
on release
show or hide
single line of text
normal
on click
animation
created an animation to fly in from right
on click
on click
show or hide
large text box
click
Clicked on the photo and created a button with the following characteristics
on release
show or hide
large text box
normal
on click
animation
created animation for photo to fade out
click
When I preview the animation, the large text box never appears. I had the same problem to begin with, with the single line of text, and the fix was to change from flying in from the right to fade in.
I spend hours every time I start one of these "animations," and sometimes I find the choices I made changed after I left the menu; other times, I find it will work if I select a different animation; sometimes, I wait until the next day and start it all over. It's really frustrating. I have yet to get the "swoosh" animation to work. Has anyone encountered these same problems?
I'm a very new user, but I have watched every YouTube and read every tutorial I can find on these buttons. Nothing seems to be helping.
I appreciate any help you can give me!
Thanks.

After trying successfully to uninstall and reinstall, the Adobe still fail to launch with the following error message: "Adobe has stopped working"
Microsoft Window 7 and adobe reader XI
Any suggestion?

[SOLVED]nm-applet fails to launch after update

Hi,
I've just updated NetworkManager and network-manager-applet:
[2012-10-31 20:16] upgraded networkmanager (0.9.6.0-2 -> 0.9.6.4-1)
[2012-10-31 20:16] upgraded network-manager-applet (0.9.6.2-1 -> 0.9.6.4-1)
After reboot nm-applet fails to launch with the following error:
** (nm-applet:6657): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Rejected send message, 2 matched rules; type="method_call", sender=":1.48" (uid=1000 pid=6657 comm="nm-applet ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=267 comm="/usr/sbin/NetworkManager --no-daemon ")
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** Message: applet now removed from the notification area
** (nm-applet:6657): WARNING **: Failed to register as an agent: (32) Session not found
When using sudo nm-applet:
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** (nm-applet:6767): WARNING **: Failed to register as an agent: (32) Session not found
Any idea on what went wrong after the update?
Thank you in advance!
EDIT:
While migrating to systemd, I forgot to replace the ConsoleKit line in /etc/pam.d/slim with:
session required pam_systemd.so
->Problem solved
Last edited by geekmiki (2012-11-01 00:53:29)

Related news: https://www.archlinux.org/news/consolek … by-logind/

The iTunes application could not be opened. An unknown error occurred

Has anyone else gotten this problem after downloading iTunes 7? I didn't have this problem with the previous version, and I tried to repair this one and the same problem still happens. Before the error box pops up, though, it asks me to agree to something. Help would be appreciated, thanks.
Windows XP

okay, erin, it sounds like you've already seen this article:
iTunes 7 for Windows: iTunes fails to launch with an unknown error
... but even if you've had no joy with that, there are some other possibilities to check on.
That error has been known to be produced by having Total Recorder or the Volume Logic plug-in installed on the PC.
For a workaround for Total Recorder, see:
chuckieb: One fix for iTunes 7 "0x666D743F" error
To check on the Volume Logic issue, see:
Troubleshooting issues with 3rd-party iTunes add-ons
For yet further possibilities, see other posts in chuckieb’s thread.

ITunes 10.4.fails to launch, (mac OS10.58), error 13001

Similar Messages

Maybe you are looking for