ITunes 10.4 iphone is not connecting, and store don't accept my login...
i had to reinstal every componant of my itunes to make it work, now it does, but doesnt recognise my iphone or let me access the itunes store... any help out there please?
thanks!
The iPhone has a 1 year warranty. It's possible that if you got it at launch, yours has expired, but hard to say.
By toggle switch, do you mean the power button?
Similar Messages
-
phone can not connected to itunes bcs the device service is not started so ido not know what can i do!
restart apple mobile device in windows http://support.apple.com/kb/TS1567
-
My ipod (version 6.1.3) was connectiong to my home wi-fi just fine until I uploaded new music from my itunes via my laptop. Now my ipod and my iphone will not connect to my wireless network. I've uplugged my wireless network and reset my network settings etc... nothing seems to work. Please help!
Does the iOS devices connect to other networks?
Does the iOS devices see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Since both iPhone and iPod stopped connecting I suspect a problem with your network. -
i am unable to sync my iphone with itunes on my windows pc and itunes show that your iphone is not connected?
You have posted to the iTunes Match forum, which your question does not appear to be related to. You will probably get better help by posting in the Using iPhone forum.
-
my iphone says 'iphone is disabled connect to itunes' and when i do connect it, it says 'iphone could not connect to itunes because it is locked with a password and you need to unlock it but it doesnt let me as it is diabled???????
hi, may i know how to restore and put it on recovery mode??
as I faced the same problem as you now...
Thanks -
Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopelessIf you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.
-
I updated my iPhone 3G today and after the update it said on iTunes that my sim was not compatible and my iPhone screen went on to slide for emergency/connect to itunes. Ive tried restoring it but it hasnt worked. Please help!
Unless the iPhone was purchased as unlocked very recently directly from an Apple Store (the only place in the US where unlocked iPhones are sold, and then only since June), which from the symptoms I doubt is the case, then it was locked to AT&T and jailbroken to make it work with an Irish cell carrier. Updating the operating system has now relocked the iPhone back to AT&T.
Only the cell carrier can institute an official unlock, one which will hold across updates of the operating system, and AT&T will not do so for any reason. All we can advise here is that you return the iPhone to your uncle and purchase an iPhone there in Ireland.
Regards. -
sorry can anyone help me...? my iphone is not starting and when i want to start it after the apple icon it appear that connect to itunes and when i connect it just there is one option and it says that restore your iphone.when i restore it says cant restore... please help me...
See Here...
iOS: Not responding or does not turn on
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430 -
Can I remotely remove Apps from my iphone when not connected to iTunes. I have my apple ID and password. but my iphone is not in same wifi range
Sorry, not sure what you mean by remotely?
You can remove apps from your phone without being connected to anything if you have the phone in hand. Were you speaking about something else?
If not, then you just press on an app on the Home screen and hold it down until they all begin to wiggle. Apps that you can remove (non-Apple apps) have a little "x" in the top left-hand corner. Tap on that, and the app will be removed.
Cheers,
GB -
how do i update itunes on my iphone? I used to open itunes on my computer with it connected and itwould ask if I wanted to update but that is not happening now?
You don't update itunes on your phone, you update itunes on your computer.
-
my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My husband and I share an Itunes account so use the same email address and password. Our iphones are now connected and we get each other's messages and share each other's contacts. How can we stop this happening?
A couple of different approached:
Create a second AppleID for one of you that includes the email address and phone number you wish to use for messaging, but do not apply it to the iTunes and app store (just keep the current one). My wife and I do this and it works quite well. Also allows for easier syncing of Contacts , notes etc. using icloud if you wish to do that.
Add additional emails/phone numbers to the existing account and change the Send/Receive settings for Messages. this will not fix the Contcts isues for you however. -
About a week ago I noticed that whenever i plugged in either my iPhone 5 or iPad mini to my mac, I would get a prompt asking if it was ok to trust this computer. I never got that before. Even after selecting "trust", I still get a message from iTunes that the device will not connect. I am using an apple sync cord in could shape, connections are good. They charge fine when plugged into this cord to the mac, but will not show up in iTunes.
Good afternoon, UnclePapa,
If iTunes is not detecting two iOS devices, try the steps below to resolve the issue. First, I would suggest signing out of your iTunes Store account on your Mac and on your devices. Then restart all devices, and sign in with the same Apple ID on all of them.
iOS: Device not recognized in iTunes for OS X - Apple Support
http://support.apple.com/en-us/TS1591
iOS: Device not recognized in iTunes for OS X
If your iPhone, iPad, or iPod touch doesn't appear under Devices in iTunes after you connect it to your Mac, refer to the troubleshooting suggestions below.
This article is for OS X. If you're using a Windows PC, see what to do if your Device not recognized in iTunes for Windows.
Follow these steps to resolve your issue:
If you haven't connected your iOS device to this computer before, unlock the device and tap Trust. Learn more about the Trust This Computer alert.
Restart your iOS device.
Restart your Mac.
Make sure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
Install software updates on your Mac.
If an iTunes update is available, apply the update.
Check USB connections. iOS devices need USB 2.0 to work properly. If you're not sure your Mac has USB 2.0 ports, check the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Try another USB cable.
Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.
Last Modified: Jun 23, 2014
All the best,
Judy -
I use two MacBook pro, two iPads and two iPhones. Upon connection and attempt to synchronize photos I receive a message that my authorization limit is exceeded. I read that iOS devices do not count against the authorization limit. One iPhone and one iPad show in the authorization list. iTunes wants to delete my purchased programs and books from the iPad to continue synchronization. What can I do?
Ok, now I do wish I could edit....
I forgot to APPLY the network settings for the USB cable to work. Connected thru USB I can tether.
So, I kept playing, and playing some more...
I had previously unpaired everything, and gone as far as removing network devices HOWEVER...
I didn't remove the Ethernet, Firewire or Airport Network devices.
Now, I have done so. I REMOVED EVERYTHING
No pairing, no network devices.
Bluetooth was already turned off, and I rebooted.
I turned off tethering and rebooted the iphone.
I turned on bluetooth (on the MBP), I turned on tethering. I browsed for the iphone. It said I was already paired???? Ok, repair AGAIN, and THE IPHONE SHOWED MY BLUETOOTH TETHERING BLUE BAR at the top of the screen!
I opened a web page, no go... d4mn, I was close...
Opened network preferences and the created a new bluetooth PAN and voila! Internet back on the MBP. I am about to reinstall the ethernet and airport (I can live without firewire for now) and see what happens.
Basically, the link I posted two posts ago, I had already done that, but I NEEDED to remove ethernet, firewire and airport as well...
So MAYBE it's fixed, we'll see for how long. I'm not going to mark this as answered for now, because basically, it has failed for no reason, and I want to know why...
Hopefully someone can come up with something, but having to delete and reinstall all pairings and network devices (to me) is not really a solution, it's a workaround (at best). -
Can I remotely remove Apps from my iphone when not connected to iTunes
Can I remotely remove Apps from my iphone when not connected to iTunes. I have my apple ID and password. but my iphone is not in same wifi range
Tap & hold an app icon until they wiggle then tap the X on the app you want to delete.
Maybe you are looking for
-
Hi all, This had probably been answered so apologies. Can't seem to find out how I can grab a simple log of JDBC Connection Pool info, Session info, and THread Usage while we are stressing our system our system, without having to look at the admin co
-
Just updated to IOS5 on my iPad. Upon syncing the iPad several black boxes in lieu of phtos appear in Photos on iPad. Original photos are intact in iPhoto on computer. Tried re-syncing....same thing. Also photos sync fine to iPhone (without IOS5).
-
Dng convertere stopped working
When i first downloaded dng converter it worked fine.After about a month it stopped working.Instead of the raw file showing up as abox in which 'dng' was written,psd box showd up instead and when clicking on this it opens up the raw file editor but t
-
On our database we have to many reads as found from statspack report. I am trying to tune the queries in terms of missing indexes. Is it also possible that changing some parameters can improve performence/ some parameters are test10.__db_cache_size=9
-
Is it possible to launch a sap event from unix?
thanks