ITunes 10.4 on Snow Leopard doesn't have AirPlay button any more
I just updated my iTunes and now I can't find AirPlay button, which use to be on the bottom on the window.
Nevermind, I found the answer : AirPlay button doesn't appear if there's no AirPlay device available. I had to restart my Airport Express and now the button's there.
Similar Messages
-
Preview.app in Snow Leopard doesn't open some jpg files
Preview.app in Snow Leopard doesn't open some jpg files.
Preview does't issue an error message, it behaves as I did't try to open file at all.
These images could be easy opened in iPhoto, so files seem to be OK.
I couldn't attach one such example image to this message, it's exceeds 2mb limit, but courtesy to google image could be downloaded by the link https://docs.google.com/leaf?id=0B56gs1tsb9aNYjA2MDdmNzUtOWY3NS00ODg1LWIzZDAtYTA 5YzFjZmZjYjRh&hl=en_US.
What's that? Should I file a bug?
ValeriyUnfortunately, it sounds as if your internal disk failed (hardware failure).
Things to try:
(1) Boot from your Apple Hardware Test CD/DVD, which sometimes is a separate disk or sometimes is on the original OS install disk. Run the tests, all of them, to see what is amiss.
(2) Reset PRAM as described in http://support.apple.com/kb/HT1379 . I don't think this is likely to help because even though your startup disk is not being selected, it seems that your internal disk is simply unable to be found or mounted, implying hardware failure more than software. But it's worth a try.
Probably time to take your computer in for repairs, either at the Apple Store or to an authorized Apple repair shop. Most likely they will simply replace your drive. You could also ask them to mount the old drive in an enclosure to see if files can be copied from it if you don't have a backup. -
Is iTunes 11 compatible with SNow Leopard?
Is the new iTunes 11 compatible with Snow Leopard? 10.6.8
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
From iTunes download page http://www.apple.com/itunes/download/ -
ITunes 10.5 on Snow Leopard crashes
My iTunes 10.5 on Snow Leopard crashes after several minutes from starting. I've tried to reinstall it many times, but nothing helps. What should I do to solve this problem?
Very many thanks to you, Putaro! Your answer provided the solution. It was a buggy plug-in that turned out to be the culprit.
You're off the hook, Apple, and my apologies for stating that you let a dog run loose. You skated by this time, Apple. But I'm watching you.
But again, Putaro's reference to the plugins I had installed over the years turned out to illuminate the problem. I have several plugins in my iTunes plugins folder, pretty much all designed to add more visualizer functionality. I removed all of them, and ALL of the problems I noted in my post went away, with full iTunes functionality restored.
I began adding the plugins back to hopefully single out the culprit. Among the ones I had been using included fielder, G-Force, Timestrech, volcanokit, QuartzComposer, and Jax. I hadn't used any of them in a while - probably at least a verison or more back in iTunes updates, but iTunes continued to work with all of them installed. Currently, only QuartzComposer continues to work in iTunes 10.4. The rest no longer even show up as visualizer opitons, with one exception. Jax does show up, but does not work. AND THE PRESENCE OF JAX IS WHAT KILLED MY ITUNES.
I looked into it and went back to the developer, and it appears that they discontinued developing Jax some time ago - evidently, it was buggy and crash prone. I remember after buying it, having problems with it - having never worked to its touted potential, but I didn't pursue it, and never uninstalled it. Leaving it in there caused all iTunes functionality to cease with the iTunes 10.4 update.
If you've got Jax installed, consider removing it before updating to iTunes 10.4.
My iTunes is now working right as rain, thanks again to Putaro!
-Jon -
Recently Safari has been quitting unexpectedly. I've dumped my cache several times and even upgraded to snow leopard.l I have the latest version of Safari 5.0.5. The situation has gotten quite annoying and been going on for about three weeks now. What can I do to fix this short of bringing it to someone?
I restart and it works fine for awhile and then it quits again. I either restart and/or dump the cache AGAIN! This is getting quite tedious. I've even taken the battery out and reinstalled it. Nothing seems to stop the quitting.You don't need anything higher than OSX 10.6.8 to run iTunes 11. iTunes system requirements - http://www.apple.com/itunes/download/
You can't upgrade without more RAM.
MacBook upgrade possibilities - https://discussions.apple.com/message/19577869 - "The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion."
Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion - https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store. (Update 11/2012: SL is now available online again http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard - USA http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard - UK) -
I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, MarkUnfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems. -
Hello, I just bought a Snow Leopard and I have tried to install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.
ThanksHere are the directions:
http://support.apple.com/kb/HT3910?viewlocale=en_US
Ciao. -
I just upgraded to Snow Leopard, and I have Aperture 3.1.3. Now after I import pics from my camera I get a dialogue box so large that I can't see the eject card button. Consequently, I can't get rid of the dialogue box without having to do a force quit on Aperture. How do I fix?
I can drag the dialog box, but I can't move it up far enough to get to the eject card button. The dialogue box contains all the jpeg Numbers I am trying to upload. It has never done that before. It used to be just a smal dialogue box with no jpeg numbers in it.
It is even difficult to get to the Finder with the Dialague box is open. I have to force quit aperture.
Any ideas would be appreciated. -
How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data. -
I have a problem with a snow leopard to mountain lion upgrade. Any suggestions?
I have a late 2007 I-Mac currently running snow leopard. My computer meets the requirements for RAM, available disk space, etc. to upgrade to Mountain Lion. I also have a new Mac Book Pro that I just updated the Mountain Lion software on. I have followed the steps outlined by Apple as follows.
To install OS X Lion or Mountain Lion on another Mac, open the Mac App Store, sign in to your account, and re-download the OS by selecting it in the Purchases list. Follow these steps:
Download Lion or Mountain Lion from the Mac App Store on one of your personal authorized Macs. The download is approximately 4 GB in size.
Install the OS.
Log in to another computer that you wish to install it on.
Open the Mac App Store. Enter your Apple ID and password that was used to download either Lion or Mountain Lion on the first computer.
Click the Purchased icon, then click the download link for the appropriate OS.
The problem I continue to have is that the program will act like it's going to download and will say it's downloading then after approximately 10 minutes the App Store no longer says the program is downloading and I again get the green box to "install app".
I have made sure to update my software and I have the latest updates 10.6.8 for snow leopard. I have also disabled the anti virus program. Any suggestions??If you are willing to experiment:
Unfortunately, the link for getting specific hardware versions has disappeared. So basically:
1. Get yourself a spare hard drive freshly erased or with a freshly erased partition of
around 8 GBs or more.
2. Boot to your Recovery HD. Select Reinstall Lion from the main menu.
3. From the beginning screen select your spare partition/drive as the target
destination then begin the download.
4. At the end of the download you will observe an Install button for you to click.
Now this is important - as soon as that gadget appears you must abort the
installation process. There are only two reliable ways to do this quickly: (a.) yank
the cable for the drive from the computer; (b.) pull the power on the computer -
shut it down quickly.
This will result in your finding a folder on the drive that contains InstallESD.dmg that you can now use to create a bootable USB flash drive installer based on the special build for your model. Use it until the next public release of Lion appears or you move on to Mountain Lion.
If you do not stop the download process immediately upon its completion you will end up with an installer that always boots to a non-functioning installation progress window instead of the normal main menu.
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
the copy into your Downloads folder. Now you can click on the Install button. You
must do this because the installer deletes itself automatically when it finishes
installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
a. Open Disk Utility in your Utilities folder.
b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
side list. Click on the Partition tab in the DU main window.
c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
the process has completed.
d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
list. Click on the Erase tab in the DU main window.
e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
button for Zero Data and click on OK to return to the Erase window.
f. Click on the Erase button. The format process can take up to an hour depending upon the flash
drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
a. Double-click on the InstallESD.dmg file to mount it on your Desktop.
b. Open Disk Utility.
c. Select the USB flash drive from the left side list.
d. Click on the Restore tab in the DU main window.
e. Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
f. Drag the mounted disc icon from the Desktop into the Source entry field.
g. Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
As an alternative to the above you can try using Lion DiskMaker 2.0 that automates the process. -
Having problems installing snow leopard. I have a macbook aluminium unibody 13'' running on 10.5.8.
Having problems installing snow leopard. I have a macbook aluminium unibody 13'' running on 10.5.8. I need snow leopard for ios6 and my new iPhone 5. I am trying to install using a snow leopard dvd for macbook pro but it comes up with an error message saying I can't install on this computer. I am pretty sure that my computer is late 2008 and has the spec. Is it because the dvd is for a macbook pro? If so where can I get one specifically for my computer?
1. Yes.
2. Phone the online Apple Store and order it.
(70402) -
hello, I want to know if will lose my apps if I upgrade to Mavericks? I I have Snow Leopard, and I have not because I have fear of losing my apps
You will only lose Power PC apps.
To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mavericks.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
I'm running Snow Leopard, do I have to upgrade to maverick or can I just upgrade to the new one?
I'm running Snow Leopard, do I have to upgrade to maverick or can I just upgrade to the new one?
If your Mac's compatible with Yosemite, you can upgrade directly to it.
(116191) -
I have a macbook 10.6.8 snow leopard, do i have to purchase os x lion for icloud to work on my devices?
“Apple may be working on a Mac OS X10.6.9 update to extend iCloud to Snow Leopard, an error message reveals,” MacNN reports.
“After upgrading a MobileMe account to iCloud, one developer says he encountered a unique error message in Tiger’s .Mac preferences pane,” MacNN reports. “‘You will no longer be able to sync with this machine because you’ve upgraded to iCloud,’ it begins. ‘iCloud requires running Mac OS X Snow Leopard v10.6.9 or later for Contacts, Calendars, and Bookmarks.’” -
I have a late 2009 iMac. I installed OSX 10.8.4 and want to go back to Snow Leopard. I have a 3TB external HD. Are there any issues I need to know about or tips I need to know before doing this? Thanks.
Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the
Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status
of the drive in DU's status area. If it does not say "Verified" then
the drive is failing or has failed and will need replacing. SMART
info will not be reported on external drives. Otherwise, click on
the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
from the drop down menu to one. Set the format type to Mac OS
Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on
the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files.
Maybe you are looking for
-
What is the values and meaning for parameter TCLAS in functions
what is the values and meaning for parameter TCLAS in functions like HR_INFOTYPE_OPERATION regards jan
-
Need License Key to Reinstall Windows 7 Professional
Need License Key to Reinstall Windows 7 Professional
-
Does someone can help me??? PLEASEEEEE :D
Hi!!! I have been using final cut for the last 2 years and something came up that i never noticed. When I export a project it exports as "Quicktime final cut" right? and I thought this was the best quality, its size is 720x 480 etc but today I realiz
-
Loading Large XML into Oracle Database
Hi, I am fairly new to XML DB. I have been successful in registering a schema to a table in the Database. Now, I have to load the appropriate XML into that table. I am using the Simple Bulk Loader program found on this oracle site, however, when I lo
-
I want to get rid of Backup assistant on my phone, an LG Cosmos 3. It runs everyday, which I do not need. I can't set it to backup less frequently, so I would like to remove it completely from my phone.