Itunes 10.5.1 doesn't open with windows 7 64 bit

i have just purchased a new HP laptop with windows 7 64bit and have installed itunes. all the files have installed correctly but the program doesnt open. any ideas ?

1. First check if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
2. If that fails, refer to following article to remove SC Info.lib file:
http://support.apple.com/kb/TS2363
3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REAPIR.

Similar Messages

ITunes 10.5 just doesn't open in Windows 7 (32 bit)

Hi everyone! I really hope anyone here can help me out.
This morning I started my iTunes and an upgrade installation for the 10.5 get started, as usual. After the installation was completed the new iTunes has just stoped to work. When I double click the iTunes icon to start the software nothing happens! No response at all! No iTunes window or any kind of error message.
I've already uninstalled it 3 times, but the issue still remains, same behaviour. Quicktime is working fine. In the task manager, the service iTunes.exe appears for only 3 seconds and then goes away.
These are the services that remains in Task Manager:
- AppleMobileDeviceService.exe
- iPodService.exe
- iTunesHelper.exe
I've tryied also running a windows registry cleanup before the installation, but...
I just followed the instructions to have the iTunes upgraded as usual. The installation went with no error (apparently!). But I don't have a clue about what might did wrong! :/
Anyone? Pleeeeeeease!!
Thanks

1. First check if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
2. If that fails, refer to following article to remove SC Info.lib file:
http://support.apple.com/kb/TS2363
3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REAPIR.

Just updates itunes and now it doesn't open at all, not even an error message

I just updated itunes and now it doesn't open, no error message comes up, it's like i never even clicked it, well for a second the 'in progress' circle spins
tried restarting the computer, that wasn't any help
cleaned up registry with ccleaner
even opened up programs and features and right clicked it instead of uninstalling it i clicked repair, no help either
please anyone have a solution?

try with this one
uninstall all the apple application S/w from your pc,
Reboot it
Now download a fresh itunes from apple and try installing
Reboot it

ITunes stops working and closes on opening with Match on, works fine with match off

iTunes stops working and closes upon opening with Match on, works fine with match off

I am having the very same problem with iTunes, I'm running Windows 7 64 bit and started having the problem after the latest update. I just upgraded to the new 5s and was syncing everything to it, so I figured that I would update my itunes software as well. Which I never do after updating one time and had trouble with it on my old laptop and had to rollback to a older version of itunes. I have tried every suggestion that has been posted in the Apple Discussion area and on other websites no luck what so ever. I figured I will wait till Apple comes out with another update and try again. In the post above I am having the exact problem with iTunes. I'd love to know what thef-ing problem is because this is extremely annoying!

Itunes doesn't open in windows 8

itunes doesn't open in windows 8

Hi kozzie17,
If your music is no longer opeing in iTunes by default on your Windows machine, you may find the following article helpful:
iTunes for Windows: How to make iTunes the default application for music and audio files in Windows Vista and Windows 7
http://support.apple.com/kb/HT3202
Regards,
- Brenden

OER 11.1.1.7 - Asset Navigator doesn't open with an Error - Missing Required permissions attribute in main jar

Hi,
I have installed OER-11g version 11.1.1.7 and am successfuly able to open Asset Editor , ImpExp utility and also could harvest SOA and OSB components.
Issue 1:
However while trying to open the Navigator of the harvested components in OER console, a new window opens with two sections ( top and bottom). The top one which is a diagram view doesn't open with an error - Missing required permissions attribute in main jar: http://localhost:7101/oer-web/applets/components.aler-thinkmapclient-11.1.1.7.0.jar.
Please find the screenshot below.
Issue #2 : While trying to browse for the Assets from OER console. The below error is seen ( missing permissions for components.jexplorer-11.1.1.7.0.jar)
Could someone direct me on how to solve this issue. Appreciate your help !
Thanks and regards,
Sridhar.

It works for me after I did a small tweak by as mine is a demo install.
Idea - is to make an security exception for the OER url in Java control console
Steps to do that :
1.Go to the control panel and uninstall the 64 bit version of Java
Open Programs and Features and select the 64 bit version of Java and select Uninstall.
2.Open up the Java Control Panel
Found as an option in the standard windows control panel
3.Check the version by clicking on the About Tab
If this is not what you expected you can go to java.com and download the latest version.
4.Click on the Security Tab in the Java Control Panel
5.Click on the Edit Site List button in the lower RH corner of the control panel
6.Add your URL to be allowed
Enter the full path that you use to access this such as https://myequallogics.com or the IP address if that is how you access it (as in http://192.168.0.100 - Https is recommended by Oracle.) Once complete hit OK. You should now see the exception on the security page.
7.Close out of the control panel.
8.You can now acess your site through the browser window.
Thanks to Java error: Missing required Permissions manifest attribute in main jar - Spiceworks for letting me know this.
regards,
Sridhar

TextEdit 1.7 doesn't open with blank page - why?

Why the change, Apple, why?
I use TextEdit all the time - it's simple - I can copy and paste important web-realted writings, like the one I'm writing right now, in case the web crashes or my wifi goes out or yet another Safari bug appears. And when my writing is inspired, I can open TextEdit quickly and get the idea typed quickly - unlike other programs that take a moment to open.
But now, TextEdit has changed in OS 10.7.3, for some reason:
1. When you open the application, it reverts to whatever you were typing before, or whatever document was saved the last time you opened TextEdit. E.g., it doesn't open with a blank page. Why on earth would you change this? Now when I'm finished typing something, I have to select ALL and DELETE the work, so it doesn't distract me when I open a new document, or I want to save some completely new document. That simply adds up to more mouse-clicking in a long day.
2. There is no "save as" under File. Just "save". Again, why change this?
Apple / Mac, just ask yourselves, is this a "change", or an "improvement"?
TextEdit 1.7
Mac OS 10.7.3

Haha, yes glankrudolph, there is many a long-running thread on just this topic.
This might help:
http://reviews.cnet.com/8301-13727_7-20102158-263/duplicate-vs-save-as-in-os-x-l ion/
And these might not...
https://discussions.apple.com/thread/3210906?start=0&tstart=0
https://discussions.apple.com/thread/3201695?start=0&tstart=0

ITunes 12.1.1 does NOT work with Windows - Fix??

Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

Lion Mail doesn't open a window

I keep finding unwelcome changes in Lion, especially Mail. Now I notice that Mail doesn't open a window if I bring Mail to the front and no window is already open, and if a window is minimized it won't open it either as it used to do in Leopard. I have to go to the added trouble of going to File > New Viewer Window to get the regular window or click on the window in the dock. I don't understand why this was changed, it just makes more trouble.
I know people complain about changes, but I just need to know if there's a way, maybe with the help of Terminal, to bring it back to where it was?
(I am in classic layout)

No problems,
Its caught me out before too.

I tunes doesn't open in windows seven

i tunes doesn't open in windows seven

hi macsluggo!
hmmmm. there can be some connection problems with ipods and Toshiba laptops. so i guess it's plausible that you're getting a really subtle version of that:
iPod not recognized correctly on Toshiba laptop
(anyone else with better ideas, please feel free to leap in!)
love, b

Beats audio doesn't start with windows

Hi,
beats audio doesn't start with windows. when i log into windows, no beats icon shows in the notification area.
it only works when i go to Control Panel and open up beats audio control panel, then the icon shows up.

Hi @MadGrin
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
When I checked the driver page for DV5000 I noticed it came with either XP or Vista.
Have you checked for any HP bios updates for your notebook? If not you could try that but please be aware that updating the bios does have a potential to cause damage. For this reason I suggest contacting HP support for assistance with that process .
Updating the BIOS
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Have you checked compatability for Windows 8.1. Windows compatibility Center
There is a option to scan your computer to check if your apps and device work.
Have you done all the updates for Windows 8.1?
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

Open with window

When I click on "open with" to get more information on a file,how do I change the application that I use to open that file?Why are some applications listed grayed out,while other applications can be chosen?

https://social.technet.microsoft.com/Forums/sharepoint/en-US/5d1a207b-7e75-4da8-8e12-adb31e0d7697/actions-edit-in-datasheet-and-open-with-windows-explorer-missing-i?forum=sharepointgenerallegacy
If you're using the 32-bit version and still having issues, you may need to repair or reinstall Office so that the underlying Office DLLs (on which those browser features rely) are clean.
http://sharepoint.stackexchange.com/questions/27319/how-do-i-enable-open-in-explorer
You might be using 64-bit Internet Explorer. Switching to 32-bit IE caused the featured to become enabled. There was absolutely no indication in the application that this could possible be the cause. It was a shot in the dark.
Mind: blown.
The Plan Browser Support article on TechNet lists the supported browsers and limitations in "non- or partially supported browsers".
It states the following among the limitations for 64bit IE 7, 8 and 9:
Explorer view
Removed in SharePoint Foundation 2010. Libraries that have been upgraded from earlier versions of SharePoint Foundation 2010 may still have Explorer views and these may not work.
If this helped you resolve your issue, please mark it Answered

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

Itunes 10.5.1 doesn't open with windows 7 64 bit

Similar Messages

Maybe you are looking for