ITunes 10.5.1 will no longer connect wirelessly to ios devices.

I did not have a problem connecting wirelessly when I had 10.5 but after upgrading to 10.5.1 the only way for itunes to see my ios devices is to connect via usb.
I am running windows 7 and have tried rebooting with no luck. I do have sync with this iPhone and iPad over Wi-Fi checked. Any help would be greatly appreciated. Thanks and have a great day!

exactly the same thing has happened to me

Similar Messages

  • Asus laptop will no longer connect wirelessly to HP printer

    My Asus laptop was connected to my HP PhotoSmart 7420 printer, wirelessly with no issues. In the last month, I upgraded my Comcast internet service to the fastest speed Comcast has available. In addition, I replaced my router ( Linksys Model: WRT1900AC) & range extender (NetGear Universal Dual Band Wi-Fi Range Extender, 4-port Wi-Fi Adapter). Every WiFi related item in my home works much better with the exception of the printer. On my laptop, I removed the HP printer and asked the laptop to search for it to re-install; the laptop indicates "no printers available"? Even my desktop PC sends error messages indicating that the "scan to computer" feature no longer works when, in fact, it does work?
    Help!

    Hi @TSimo,
    Welcome to the HP Forums!
    I wasn't able to find much on a Photosmart 7420, did you perhaps mean Photosmart 7520?
    If that is correct, this may just be a case of needing to reconnect the printer to the wireless network again due to the upgraded router and extender
    To do this, please restore the network defaults on the printer (press the wrench on the printer's touch screen, select Wireless, then select Restore Network Defaults, should be the last option) and once that completes go back to the same Wireless menu on the printer and run the Wireless Setup Wizard on the printer. This will update the connection on the printer itself.
    After this completes you will need to remove the driver and re-add it on the computer. How this is done depends on the operating system, so if you're not sure how to remove the driver and re-add it, please let me know which operating system you use and I will get you some instructions
    Hope to hear from you soon!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Since recent iTunes upgrade, Apple TV will no longer connect to iTunes

    several glitches, this being a big one. any suggestions?

    Now before winston says I am barking mad this is an all apple issue and should not be an issue
    I'm not saying this isn't a genuine issue for some, I just don't believe it's a general issue with 7.5, we get these reports after every upgrade and usually in quite high numbers, but as I said before high numbers usually mean 50 or so which isn't really a lot.
    I suspect many of these issues are caused because itunes has not installed properly due to a file being in the wrong place, corrupt, missing or having wrong permissions etc, which has not allowed the installer to overwrite, move, rename or delete etc that file or another one.
    I don't necessarily blame the user for this, but then again I'm not so sure you should blame  for it either, it can often occur through using poorly written 3rd party applications for example. The point I make or at least try to is that when trying to solve such issues it is often unhelpful not to have an open mind about the cause and hence the cure for such problems.

  • IPod Will no Longer Connect to iTunes 10.22.. Help!

    Hello everyone! Today I decided to update my itunes to the latest version ( 10.22). BEfore I updated, I made sure to sync my ipod. Everything worked fine. Ipod connected, it sync, and etc... But after I updated to 10.22, my iPod will no longer connect. My Windows xP reads the iPod, but not iTunes. What should I do, becuase I need to sync my new settings to my iPod!
    Thanks for any help in advanced.
    Ant1235

    Bump. I still need help.

  • My iphone 4 will no longer connect to my Itunes since 7.1.1 update itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected

    my iphone 4 will no longer connect to my Itunes since 7.1.1 update, itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected but itunes unable to see it
    any Ideas cheers

    Try holding the power and home button untill the apple symbol appears and let it reboot, if that does not work Try a DFU restore https://discussions.apple.com/thread/5269891

  • My ipod will no longer connect to itunes

    My ipod will no longer connect to itunes except for while it is restarting. However once I get to my log in password it disconnects. Also my computer does not seem to recognize my ipod yet it still manages to charge it even though it is not recognized. I have tried unistalling itunes/ installing it again. I can't seem to reset my ipod, and I have turned off my firewall and disabled my anti virus. Nothing seems to work and I am losing my patience. This just happened out of no where. Does anyone have any suggesting about what I could do?

    May somebody please help me?

  • Apple remote will no longer connect to itunes on my pc after updating to ios5

    my apple remote will not connect to itunes on my pc after updating to ios5 anyone know why.

    Hi Chukwudinma!
    Here is an article that will help you troubleshoot this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • HT4623 my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?

    my ipod touch will no longer connect to my laptop because my ipod is not up to date, but it won't find a newer software. what should I do?

    the computer is a macbook pro, mac os x 10.6.08 and the ipod touch is ios 6.0.
    the problem is that just updated the itunes on the computer and now the ipod won't connect because apparently the itunes on the ipod is not up to date but the iod is telling me that is is up to date, so i can't do a software update.

  • My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have  any drivers
    its driving me round the bend at the minute

  • IPod will no longer connect

    Both the iPods in my house hold will no longer connect to my computer. They use to do it just fine till now. The computer is on, iTunes is up and running but the iPods won't connect. I haven't changed anything or installed any new devices on the computer either. Ive also reset the iPods, but nothing happened. What happened? Can anyone help me?

    Try putting one of the iPods into Disk Mode first.
    http://support.apple.com/kb/HT1363
    Then connect it to the computer.
    Other things to try... These are separate things to try. Use a different USB port. If you are using a USB hub, connect it directly to the computer. Remove all USB devices from the computer, except for the keyboard and mouse (remove any USB hubs too); then connect the iPod. Try a different USB docking cable, if possible.

  • IPhone 4s 5.0.1 will no longer connect to wifi

    Updated to iOS 5.0.1 and now my 4s will no longer connect to wifi.  iOS 5.0 worked perfectly.  Now the phone tries to connect to wifi but fails every time and the battery drains faster than water from an unstopped sink. My guess is that the battery drain is due to the phone trying to connect to wifi.  I have done all the usual things.  My phone is 4 ft from my router (and it worked perfectly under iOS 5.0).  I have restored the phone on iTunes with no change.  I would love to go back to iOS 5.0.

    Just checked my wife's iPhone 4.  Did an over the air update to 5.0.1 and apparently that killed the wifi on that phone as well.  My iPad 1 and iPod Touch works fine.

  • My iphone 4s and ipad 2 both with 7.0.4 update will no longer connect to wifi but non-mac lap top has no issues

    my iphone 4s and ipad2 both with 7.0.4 update will no longer connect to wifi.
    About three days ago the ability to connect came and went and the connection never lasted more than 10-15 minutes; it has not been able to connect since last night. I do not think it's my wifi router as non-mac lap top has no issues. I have seem many similar questions posted.

    Reboot your router by removing all power from it for about 15 seconds. Also, if your router still has its default SSID (such as LINKSYS, DLINK, NETGEAR, etc) change the SSID to something unique. Note that all other devices on your network will have to be reconnected if you change the name, but if the name is still the default that is most likely your problem.
    If the SSID is not the default then the reboot should fix it.

  • My NetExtender VPN will no longer connect with the Lion upgrade. Can anyone help me?

    My NetExtender VPN will no longer connect since I've upgraded to Lion. Can anyone offer some advice?

    I have not found this to be a solution in my case. I have some Apple OS users, Fedora/Ubuntu users and Windows 7 users who are using the SonicWall client. They can connect to either location in the US fine. Once connected, they receive a DNS search domain of pppFrameEncoded =0; instead of our AD domains which are passed fine in Windows and additionally the correct DNS servers (IP addresses) are listed in preference above the local router IP of the user.
    I found that the correct DNS and routes were listed in the SonicWall client and while could ping the IP of the resource, I could not resolve its hostname with the Network Utility. After manually adding the Search Domains (we have two) in preference and removing the previous above, I was then able to resolve lookups to the FQDN and IP but not the hostname. This really ***** for our Apple users who are mainly execs and use samba connections to shared resources. Strangely enough this also seems to impact the Apple iPad and iPhone 4 I have on iOS 5.1 as well. Any thoughts anyone? Can connect with no error, ping IP, can resolve easily FQDN and can access resources by IP or FQDN but not by hostname.
    172.xxx.xxx.xxx works fine
    smb://hostname.sub.domain.com works fine
    smb://hostname does not but resolves
    Anyone else run into this? It doesn't affect any Windows users at all.

  • My Macbook Pro will no longer connect to my tv via HDMI

    Well basically it is in the title, my Macbook Pro will no longer connect to my tv via HDMI.
    I have been using this cable for a long time and works perfectly.
    earlier today i used it to connect my mac up to my parents 4k tv, it worked fine, did what i wanted to do.
    but now when I've come to connect it up to my tv it recognises there is something connected but it won't display anything
    it just says no signal on my tv
    im not sure whether my mac has changed some settings on its own to run on 4k but now to high to run on my 1080p tv
    pretty annoying so any ideas id be very grateful.
    I've already tried
    restarting my mac
    turning tv on and off
    different hdmi ports
    thank you

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try another cable

  • My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days

    My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days

    Hi Jpcbew,
    The article linked below provides a lot of great information and troubleshooting tips that can help you resolve the issue with your iPhone 6 Plus connecting to you car stereo system. 
    Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
    So long,
    -Jason

Maybe you are looking for

  • Use of RTP in calc script

    Hi, Can anyone please let me know if run time prompts can be used in calc scripts? Actually, we need to have some aggregation at a particular scenario, division and month level in essbase. We are using 11.1.1. Thanks.

  • What OS can I use

    Hey there I just (like 10 minutes ago) was given an old iBook G3(dual USB, I believe). The previous owner upgraded and was only offered $50 for it, so he asked if I wanted it for free. Anyway...I know that I'll have to bump up the RAM, but what versi

  • The phone wont install update

    I have tried soft and hardreset but it wont reset my phone....i have downloaded preveiw for developers update and now the update is not installing...it only shows 2 gears rotatating for past 7 hours with no progress

  • Add a future date in pages automaticly

    Hi there! This is my first post but I've learned loads from this forum, so thank you for submitting. Q: Is there an option to add a future date to a document automaticly.  For example: When I create an invoice from a template, I want the paydate to b

  • Date category

    Hi, when i trying to save sales order it shows the massege that Date category Z5 03 does not exist. please let me know about this date problem. thanks