ITunes 10.5.2 failed on my Windows XP system. Now my phone is not recognized. I tried installing manually. I tried to repair using Add/Remove programs. Still get errors.
Attempted update to iTunes 10.5.2 failed on my Windows XP system. Now my phone is not recognized. I tried installing manually. I tried to repair using Add/Remove programs. Still get errors.
Try doing it in a WIndows Safe mode - Restart computer and hit F8 key right after your see BIOS check and choose "Safe mode with networking"
Do the SFC /SCANNOW again.
If that does not work, whilst in safe mode, download Free Malwarebyte software from CNET's Download.com. Install, update virus definition then perform a full scan. Remove if it did find some viruses or trojans. Restart computer.
Back to regular windows, do the SFC /SCANNOW again.
If that doesnot work, check to see if your Hard drive has errors or bad sectors
GO START BUTTON /COMPUTER, right mouse click OS (C:) and choose "Properties"
Choose "Tools" tab and under error checking, click "Check Now".
Make sure "Scan for and attempt recovery of bad sectors" is checked and click start.
Restart windows will perform the above task to fix errors This may take hours depends on how big is your Hard Drive
Good Luck!!.
Similar Messages
-
Need help finding out what happened to my phone and what I can do. After trying to update my iPhone 3GS to IOS 5 my phone will no longer work and is an unknown device to any computer. It is like it wiped out everything on the iPhone and has no hardware or data on it. At the end of the download and update of IOS 5 it said there was an error during the process and gave me no option but to push ok and know phone is not working. The screen shows the USB plug and iTunes symbol, but computers will not recognize device.
What was the error number? That would be very useful since the following gives actions for various errors.
http://support.apple.com/kb/TS3694
Try manually placing the iPod in recovery mode to see if that will make the iPod visible in iTunes. See:
http://support.apple.com/kb/HT1808 -
someone please help me
What is currently showing on the screen?
Have you tried a reset by pressing and holding the Home and Sleep/Wake buttons?
In the future, it might be best to leave other peoples devices alone. -
My PC is a fujitsuscaleo 600, last year I had a new hard drive and some extra RAM fitted and since then has been good - have used, and updated Firefox for over 6 years. in August I installed TrendMicro antivirus and for different reasons this has been uninstalled/re-installed twice. AFter letting it expire, I re-installed ParetoLogic PC health advisor (I think in August too)and allowed it to try updating some graphics drivers following a scan - this was unsuccessful so I marked them to ignore (something about my graphics card not supporting the drivers downoladed). I can see the mozilla files on WIndow Explorer but if I click 'remove' (control panel, add/remove programs) I get a very short 'hourglass' then nothing; if I click Firefox icon I get the same. Help!
See:
* https://support.mozilla.com/en-US/kb/Firefox%20will%20not%20start -
I was trying to sync and update my phone with ITunes, about 5 minutes into the process everything stopped. Now the phone does not work, it will not turn on or off, the screen of the phone shows the Apple Logo and a straight line. ITunes seems to not "see" the phone. Suggestions??
http://support.apple.com/kb/HT3965
-
I downloaded the latest itunes and now my iphone 42 not recognized. what the heck is the problem?
I downloaded the latest itunes and now my phone is not recognized. I have read all sorts of fixes and none of them work. what the heck is the problem, Apple?
I got it working. I uninstalled both iTunes and apple mobile device support and then downloaded iTunes again. That took care of the problem.
-
Hi,
I am trying to validate a .Net Framework 4 WinForms application for use in the Microsoft Partner Network portal.
I am using Windows App Certification Kit 3.4 for Windows 8.1 , and the Validate Desktop App option.
To build the package I am using InstallShield 2012 SPR Limited Edition (for Visual Studio), and the validation fails
only with the following error (please also see the attached image):
Clean reversible install test: Failed to Write appropriate Add/Remove Program values
Error Found: The registry population test detected the following error: app didn't create the required registry entries.
A non-optional value 'DisplayName' is missing or invalid (same for 'Publisher', 'ProductVersion')
Please note that I have filled in all the publisher/product details in the InstallShield project, on the General Information page.
Also I have tried to use the Microsoft Visual Studio Installer Project for VS2013, and the validation failed with the exact same error.
(https://visualstudiogallery.msdn.microsoft.com/9abe329c-9bba-44a1-be59-0fbf6151054d)
Any help would be very appreciated.
Thank you.You may need to add the necessary info to the app’s Windows Installer package so it can configure Add/Remove Programs in Control Panel correctly. Setting these properties automatically writes the corresponding values into the registry. From the picture,
you are missing some necessary information about your desktop app.
Also You need the correct admin permissions to write to the registry.
Please refer to this thread:
http://stackoverflow.com/questions/21182856/windows-app-certification-kit-test-result-app-didnt-create-the-require-regist
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi! I have an iPhone 4S with iOS 6.1.3 and I have iTunes 11.1.3.8. on my Windows 8. Now I can't sync my iPhone, because the device is not recognised by iTunes. Somebody have any idea why, or what can I do (except refresh the iPhone software) ?
Hi Drazse,
Thanks for visiting Apple Support Communities.
If your iPhone is not recognized by iTunes for Windows, the troubleshooting steps in this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy -
i have a windows pc, and a 2Tb portable HD, this contains all my music folders, what settings do i use or how do i get itunes to read my portable HD on F;/ drive ?
Hopefully you have the library files on the drive too, or access to the original computer where the library still works. See Make a split library portable.
tt2 -
I installed Windows 8 and now my ipad does not show in itunes...any thoughts?
I installed Windows 8 and now my ipad does not show in itunes...any thoughts?
Not trying to start any argument here, but if you would have checked the requirements for using an iPad with iTunes on a computer, you would have seen that Windows 8 is not supported.
Apple ID (required for some features)
Internet access6
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 2 or later
Download iTunes at www.itunes.com/download
http://www.apple.com/ipad/specs/ -
Windows XP: removed bonjour by accident in the add/remove program. Now, everytime i log on, i get an error message that reads.
APAgent.exe - Unable To Locate Component
This application has failed to start because dnssd.dll was not found. Re-installing the application may fix this problem.
Tried reloading my Airport Extreme CD, but no luck.
Googled this error & got nowhere. How can i get fix this annoying error message?Which Bonjour were you using, daniel? The Bonjour Print Services type, or the one that comes bundled with iTunes?
-
I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?
I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue. -
I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?
I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
I was downloading the latest iTunes and my computer shut off in the middle and now my phone is displaying that i need to connect to iTunes and iTunes is telling me that i need to restore my phone before it will work. I have pics that i have not uploaded yet, how do i get around this without restoring my phone? Thanks,
I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?
-
I backed up my movies and rebuild my computer, and after making sure i'm using the latest version of itunes and quicktime and and making sure i still had spare computer authorizations, i still get error 23132. Please help.
I had this exact issue. Spent over an hour on the phone with apple support, they couldn't resolve. Here is what I ended up doing, that worked.
1. Turned iTunes match off on all my iOS devices
2. Deleted the offending playlists from the iOS device they originated on
3. Started iTunes, let it run (literally) for an hour before it became responsive. First thing I did, before clicking anywere else was disable iTunes match. If I clicked anywhere, it would clock for another hour.
4. Let iTunes run overnight, by morning it had cleaned out the repeating play lists. This got my Mac/iTunes back to an operable state.
5. Restore iPhones from backup in iTunes.
What was causing my issue was a single playlist that was created on an iPhone, then suddenly showed up with several thousand duplicates on my other iPhone. The culprit playlist did not, for some reason, duplicate itself on my two iPads. Apple support seemed to think it was because the problem iPhone tried to sync the playlist to iCloud over and over again unsuccessfully, then it finally went through and populated the thousands of blank/failed playlists which then tried to propigate to iTunes and my other iOS devices. Seems like a reasonable theory.
I have not yet re-enabled iTunes match. So, no idea what will happen if I decide to go back down that rabbit hole.
Maybe you are looking for
-
How to open several psdfiles simultaniously in Camera Raw 8.1
I've replaced my Ps 5.5 by Ps 6. Now I'm having problems with opening psd files in Camera Raw; in Ps 5 I worked from Bridge and could open that type of files from Bridge to ACR. I just found out how to open it in Photoshop: open as....RAW file. But I
-
My Apple TV is not responding. Screen in black and light indicator blinking fast. Cannot make it work. What should I do?
-
Get the movie on to the stage- now I have a new problem
Why can't anything be simple in this program? I have created a new movie clip which results in a new window with an empty bg. How do I get it into the scen? I cant drag import or anything.... sick
-
Object type mappings in expression builder
Hi, I'm trying to use expression builder to give me a query returning all instances of an object with a particular foreign key, and where 'active' = true. 'active' is a CHAR field in the database with values 'T' or 'F' and this is mapped to a Boolean
-
I have 16 buttons with pop up sub menus that appear when rolled over. I am using 16 different 2 frame movie clips with the collapsed version in frame 1 and the expanded version in frame 2. When the user either rolls off the submenu or enters the area