ITunes 10.5.3 update failes to install

Window 7 64-bit currently running iTunes10.5.2.11
Every time i try and run the update for iTunes 10.5.3.3 x64 installer, it goes so far as to ask where to install (yes I ran the download manually after the automatic update failed a few times).
Each time it failes almost immeadiately with the error:
"The installer encountered errors before iTunes could be configured.
Errors occured during installation. Your system has not been modified.
Please run the installer again, or click Finish to exit."
I noticed a few things.
a) The version number in about iTunes does not show the x64 after it like the splash screen for 10.5.3
b) My iTunes is installed in Program Files (x86) which is where 32 bit versions generally get installed.
So do I currently have the 32 bit version installed and the auto installer is tring to update it to the 64 bit and that is why it fails?
I've tried run the install to Program Files instead of Program Files (x86). Fails just the same. Do I need to uninstall iTunes and reinstall to get the update to work?
Or is the 10.5.3 install just borked?

Try downloading the package for new installs. the update package failed, but the new install package worked for me without any trouble.
History:
I began this trouble shooting exercise by selecting Download Only through the Apple Update applet. Running the msi manually did not resolve the problem. In fact, it was more frustrating because the download package would disappear after running even though it failed, and I had to download it again. "Cleanup" I suppose. <frown>
I followed advice to remove the Apple Software Update program, reboot and re-run the msi. That did not resolve the failure.
I then followed advice to set permissions for Administrators on registry key HKLM\Software\Micorosoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Com ponents
then reboot and run the update msi again. This also did not resolve the failure.
I downloaded the installer from the Apple download site as though it were a fresh install, and - voila! - it installed correctly and all content and settings were preserved. Hopefully that is all that is needed, not the steps above. Let me know! http://www.apple.com/itunes/download/

Similar Messages

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

HT201210 Itunes update failed to install and now Itunes won't run

Itunes update failed to install and now Itunes won't run

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Itunes latest update failed to install

Latest update failed to install.
Loaded manually.
Now won't run at all...
HELP....

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing.

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing :
To fix this I have to deinstall all components of Apple Software in exact order as you reveal on your web site. Than reinstall iTunes from Scratch.
I am using Windos 7 64 bit Professional German edition.

Hi,
to see the cause of Windows 8 update failures, we must look for error messages in the following log files:
Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log"
to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.
André
[1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code"

I tried to update iTunes yesterday. The update failed. Now when I try to open iTunes it says that the version isn't localized and needs to be run in English. It has never been in another language.

I attempted to update iTunes yesterday. The update failed. iTunes now won't open and displays an error message that the program isn't localized and needs to be run in the English version. I'm in the US and the computer and program has never been used in another language. I tried reinstalling the full download for the new version and that failed as well. I logged out; shut down; restarted; retried the update; etc. Still no luck and the same message. Thoughts?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Error 'iTunes sync Overkill 2 has failed to install'!

Hi, i have recently downloaded Overkill 2 game through itunes. When i synced my iphone, it give error 'iTunes sync Overkill 2 has failed to install'. Can anybody tell me the solution for this?

I am having the same or similar problem, wrote a simple program with xcode and it runs and loads to the iPad but when I creat the .ipa and pass it to iTunes it transfer to iPad. When transferring to iPad I get "iTunes Sync 'app name here' Failed to install. Sent to Apple as Bug # 11060939. Apple has had me update all, which I did and run thru it again and have the same results.
At this point I am wondering if it could be a setting in xcode which is also at the current level.

ITunes Sync app name here failed to install

Hi! I've recently updated to iOS 5 (well, by recently I mean 5 hours ago) and I've encountered issues not fatal but has a big impact on my part.
I encountered this error message when my iPod's restoring:
iTunes Sync <app name here> failed to install
A number of apps weren't successfully installed. I tried restoring for a number of times but the results were the same.
Though, I tried downloading the app via the Appstore on my iPod and it worked. The app was successfully installed and can be ran again.
So then, I tried transferring the purchase to my library to copy the IPA to my PC. Then removed the app from my iPod. Then tried to install again the app from iTunes (this time, I'm trying to use the IPA I downloaded via my iPod; the one that finally worked). But to no avail. The IPA that's working on my iPod didn't install successfully from iTunes.
Can you advise on how to fix this. As much as possible, I'm trying to keep all my downloads via iTunes but this incident is not allowing me to.
If you need more details, below is the list of the apps that aren't being successfully installed via iTunes: (all IPA's are up to date as of Oct. 14, 2011)
- Battleheart
- Castle Empire
- Death Rally
- Infinity Blade
- Chaos Rings
- Dead Space
- Dungeon Hunter 2
- Merriam-Webster Dictionary
- Words With Friends
- N.O.V.A. 2
I'm using iTunes 10.5 / iOS 5. My device is an iPod touch 4th gen black 32 GB

I am having the same or similar problem, wrote a simple program with xcode and it runs and loads to the iPad but when I creat the .ipa and pass it to iTunes it transfer to iPad. When transferring to iPad I get "iTunes Sync 'app name here' Failed to install. Sent to Apple as Bug # 11060939. Apple has had me update all, which I did and run thru it again and have the same results.
At this point I am wondering if it could be a setting in xcode which is also at the current level.

I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/

Bought a new iMac 27" yesterday. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

update manually,: http://www.adobe.com/downloads/updates/

10.5.7 update failed to install

The 10.5.7 update failed to install and I have got the following message:
The update "Mac OS X Update" can't be installed.
The following install step failed: run preinstall script for MacOSXUpd10.5.7.
Contact the software manufacturer for assistance.
What might be the problem?

I also have a problem with the disk permissions. Anytime I launch the 'verify disk permissions' I have got the same bunch of warnings:
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Repairing disk permissions doesn't help: I've got the same warnings again and again.
May be there is a connection between these two problems?

6.0.1 Update Failed to Install

Has anyone else encountered this issue?
My system:
* Vista 64 Home Premium SP1
* Single user/admin
My Adobe Apps:
* CS4 InDesign (6.0.0) Stand Alone (not part of a collection)
* CS4 Web Premium
Update process:
* Download manual patch for 6.0.1
* Extract from ZIP
* Disable Anti-Virus
* Run Setup
Results:
* InDesign 6.0.1 update "failed to install".
Attempted resolution:
* Disable UAC - no change
* Safe Mode - no change
* Download the update again in case it was corrupted - no change
The Photoshop 11.0.1 update, part of the Web Premium collection, worked by using the exact same update process that failed for InDesign 6.0.1.
Any suggestions?
-mt

I have been trying to update to 6.0.1 for weeks. No success. I found the log.gz file as you suggested and opened in wordpad but the file is either encrypted or corrupt. The date and time of the file is when i originally installed InDesign. Nothing has been added either today or on previous attempts to update.
I have tried to attach the file but as it's not on your list of allowed types it may not come with the message, so here is a sample:
_, ðÓ\_måú|ƒzx ¨‡Ò2jneÀž ¹.Ä
I¶\K¦ˆÜYTó ºZo ¯-d px ‡²2° yŒÊk Ž 0£*• äQ¤¢gOß úAê_ÌüO³ÖÛ°: ä $# G2?¿~þ　ôÕ　ì
ÈˆF®¸êÒY¦‰… J[€Œ x$$Tœ¤âQ!FzD5µ} ~ú ¾'Q cx± q¡[²ÑíUø<œÍAµí…sn Ö¶ÃùKÔ‚ »øã&¼lMÂôöe
Ú|™^{^
í§bÂh‡ôh»£»ºÍ˜I¬F]Þîô»¬7@　*D÷_Ÿð ú„>}[¼ÚÜÑq" E×ìÂ{Çô´q´Fæ DšC /¯ú¯ËëÿÛòfn^þçâ¥Bö¼;•dø¯{Ó¿|)ÚJ5%– }}3oõÈ!}ï*ÌªÇÀ
èþëp–^‰vÍlèÎæ7v—¼
U°CUA*U\¿ ¼ÿØ¹êß·T ÆBÖ 3HŸª@ Ó　‹±37aÝÇZ ½ï®z
]]£X
×<ÀÍËÒ]c[MÒòYäÃ#¨ wHlyT5ŽÃâ• Öâ8ðØv- h}g%Ž \Wâ€¶ö×áXýÐý* ðùƒ58ÒÏoUà€ ¶êoT?ppõU÷‡ Ô8V¡hÙþAå4Žnü8Cl¢œÆ1/‹U-µ4-^mª¥Q Óº:!Óú HAþ　[ÿƒ ä Rÿ5tëkÎŒÙº　ÆS‹l¬øŽpÂoÇ› ÎZáOÓÐòãQxy"ó|P˜Šãé b¦ûò~\¹ï6K¤ «¿AHˆ;@)n8I }ÃQ ¾Av oÆßž?»þ2þ¶@8ŸCÖÂOG§·F÷ã@ Ãt~öüÙâÏc ±úíCÀtýÖæ´ ,É¸Ú
\^b°"õ÷ß‚Z®êÕ^‹
Your advice would be appreciated.
Anne

Hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

hello i have ps elements 9 and im trying to update it so that i can open and edit my raw images but it says that some updates failed to install like 9.0.3 camera raw 6.5 and premier elements 9.0.1

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Acrobat XI 11.0.06 update fails during install

acrobat XI 11.0.06 update fails during install. Any advice or help? Here is the installer log contents:
Jan 17 00:32:34 fox.local installd[5955]: PackageKit: ----- Begin install -----
Jan 17 00:33:44 fox.local installd[5955]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “AcrobatUpd11006.pkg”." UserInfo=0x7fb9615c5160 {NSFilePath=./postinstall, NSURL=file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg, PKInstallPackageIdentifier=com.adobe.acrobat.a11.AcrobatUpd11006, NSLocalizedDescription=An error occurred while running scripts from the package “AcrobatUpd11006.pkg”.} {
        NSFilePath = "./postinstall";
        NSLocalizedDescription = "An error occurred while running scripts from the package \U201cAcrobatUpd11006.pkg\U201d.";
        NSURL = "file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg";
        PKInstallPackageIdentifier = "com.adobe.acrobat.a11.AcrobatUpd11006";
Jan 17 00:33:44 fox.local Installer[11306]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Jan 17 00:33:44 fox.local Installer[11306]: Displaying 'Install Failed' UI.
Jan 17 00:33:44 fox.local Installer[11306]: 'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'.

You are right. There are a lot more self-support tools available in Windows
than in MacOS. All you ever get on a Mac is "That didn't work: -304998173".
Thanks for your insights.
Re: acrobat XI 11.0.06 update fails during install
created by Bill@VT <http://forums.adobe.com/people/Bill%40VT> in Acrobat
Installation & Update Issues - View the full discussion
<http://forums.adobe.com/message/6040206#6040206>
The upgrade is not the 11.0.06, but that is an update. The upgrade is what
you can purchase if you had a previous version of Acrobat (at least AA 9).
The upgrade is substantially less in price than the full product. With the
upgrade you also have to have the SN of the previous product available for
the install. That is why I asked about the upgrade. Once you install AA XI,
then going to 11.0.06 is a free update (updates are changes in the
sub-version and are done quarterly or when there is a critical security
issue). You can often fix installations by running a repair. In Windows
that is done either from Help>Repair or from the Control Panel. I do not
know the equivalent of the Control panel in the MAC. In any case I am glad
you got it fixed.
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/6040206#6040206
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/6040206#6040206 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/6040206#6040206. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Acrobat Installation & Update Issues at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=4714> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/thread/416458?tstart=0.

Some Updates Failed to Install (Adobe Master Collection CS5 on OS X Yosemite)

After reformatted MacBook Air hard drive then installed OS X Yosemite. I have received “Some updates failed to install” message on Adobe Application Manager: “There was an error downloading this update. Please quit and try again later.”
However, I surfing on Adobe Product Updates website Product updates but cannot find these three affected [error] messages updates: Adobe After Effects CS5 10.0.2, Adobe Pixel Bender Toolkit 2.5 update and Adobe Premiere Pro CS5 version 5.0.4 update.
Please advise. Many thanks!
All the best,
James

Thank you so much! Also, I have download other updates manually from http://www.adobe.com/ca/downloads/updates.html
Your help will immensely.

ITunes 10.5.3 update failes to install

Similar Messages

Maybe you are looking for