ITunes 10.5/iPhone 3Gs Connection Errors after upgrade

I had quite a bit of trouble upgrading iTunes from 10.1x to 10.5. I had to remove ALL Apple products/files/registry entries. After I did this, I ran the installer file (64bit one) directly from the iTunes site. It looked as of everything installed EXCEPT one program installed partially then rolled back the installation of that particular program. The rest of iTunes 10.5 installed with no problems. When I tried to connect my iPhone 3Gs, I received the following error:
I looked in my control panel and noticed Apple Mobile Device Support is missing now. I assume this the the application that was 'rolled back'. I followed the instructions in the error listed above and the exact same thing happens again. Here is a bit of background on what I have:
My Hardware: (Gathered via BelArc Advisor)
Windows 7 Home Premium (x64) Service Pack 1 (build 7601)
Install Language: English (United States)
System Locale: English (United States)
DELL Inc. Studio XPS 435T/9000 00
Processor a
Main Circuit Board b
2.67 gigahertz Intel Core i7 920
32 kilobyte primary memory cache
1024 kilobyte secondary memory cache
8192 kilobyte tertiary memory cache
64-bit ready
Multi-core (4 total)
Hyper-threaded (8 total)
Board: DELL Inc. 0X501H A02
Bus Clock: 133 megahertz
BIOS: DELL INC. A15 07/28/2009
Drives
Memory Modules c,d
HL-DT-ST DVD-ROM DH20N [CD-ROM drive]
MagicISO Virtual DVD-ROM0000 [CD-ROM drive]
Optiarc DVD+-RW AD-7230S [CD-ROM drive]
ST3750528AS [Hard drive] (750.15 GB) -- drive 0, s/n 9VP2F6G3, SMART Status: Healthy
6136 Megabytes Usable Installed Memory
Slot 'DIMM0' has 1024 MB (serial number 475FE085)
Slot 'DIMM1' has 1024 MB (serial number 085FE085)
Slot 'DIMM2' has 1024 MB (serial number 005FE085)
Slot 'DIMM3' has 1024 MB (serial number 045FE085)
Slot 'DIMM4' has 1024 MB (serial number 515EE085)
Slot 'DIMM5' has 1024 MB (serial number 935EE085)
This is what I did so far:
Backup up my iPhone before all this started (2 days ago)
Imaged my drive just in case -ALWAYS have backups
Uninstalled ALL Apple products from my PC via the Windows Control Panel's Add/Remove Programs
Cleaned the Registry of all Apple products that I could regognize
Deleted ALL Apple folders from drive
Checked to see if any Apple service was running (none were left)
Rebooted my PC
Scanned my entire HDD and Registry for all traces of Apple products (none found)
Went to the official iTunes 10.5 site and 'ran' the installed directly from there.
All went well till the one program 'rolled back' once again.
Connected my iPhone and the error listed above remains.
Ran Apple Updater and found that Safari and QuickTime
Installed Safari and QuickTime on a chance that it may help fix or repair something that I may have missed
Cursed/Yelled/Screamed/Cried/Took a chill pill and wrote this plea for help
This may be a bit more info than most want to see, but on the chance the Apple Support personnel actually look at this post, I want them to see the full details. I work in the IT field, so complex answers are ok to post. I am willing to try just about anything at this point. I appreciate any replies and will give more details as requested that involve this issue.
- GT

This is an update to my original post...
I was able to install iTune 10.5 finally, but Apple Mobile Device Support will still not install (update actually). I restored my PC to an earlier state (before I first tried to install 10.5 the first time) and now my older version will not start since my iTunes library has been upgraded to the 10.5 format. I am really stuck here. I really want to get me music back since I have nearly 30 Gbs of music and movies I have burned from CDs. That does not even include my iTunes online purchases that I can easily revover/re-download.
- GT

Similar Messages

IPhone/iPad connection error after first login ok: The request timed out. (-1001)

Hi
I have installed SAP 9.0 PL 12, DI API all version, Integration Component of the SAP 9.0 PL12.
On my iPhone I have the 1.10.1 version of the app SAP.
I followed the directions provided in the note (also in 1602674) and in the forum, but nothing.
I start my PC (server with integration installed), do all the tests possible dall'integration admin and I always correct results.
Start app from my iphone, it connects to my DB but.... after a few minutes I get the error
"Connection Failed - The request timed out. (-1001)"
and then throws me out of the db.
If I try to reconnect, re-entering the password I have always the same error.
To reconnect, I have to restart the PC and the situation repeats itself (is the first logon, then I get the error and I can not reconnect).
Can anyone help me?
THANKS
NL

H Thusar
Update: I only changed the startup type of the service DI Proxy, Event, Integration, and instead of putting 'Automatic' I selected 'Automatic (Delayed Start)'.
I rebooted the server and I was able to connect the iPhone via app to my DB: I was about an hour, I created BP, made changes, displayed report.
I then did the logoff.
I tried to reconnect but nothing is returned the error 'Connection Failed - The request timed out. (-1001)'.
Even after restarting the server again, the app connects after about two minutes I get the error 'Connection Failed - The request timed out. (-1001)' and is no longer relates only after you restart the server.
Help
NL

IPhone network connections slowed after upgrading to IOS 5.1!!

My iPhone network connections (WiFi/4G) are extermely slow after performing the update to IOS 5.1! Speedtest.Net results over 4G = 0.15 Mpbs down and 0.05 Mpbs up ans that's will FULL bars! AT&T claims that there are no network issues in my area and they are not throttling my device. Even over WiFi it's taking FOREVER to download apps from the app store, etc... What is going on????

My WiFi connection works fine, but 4G from ATT gives in 0.15 mpbs download. I called up ATT several times, but they have no resolution to this problem. Everytime they ask me to reset my network connection. This is a big deal for me as I am most of the time on Cellular Data and I need to use iPhone for my work. I am thinking to roll back to iOS 5.0.1. What in this world could turn a 3G phone into a 4G phone just by a software upgrade? I just feel like I am down to a 1G phone. Apple please fix this asap and release a patch, else I may not be able to use this phone.

Connectivity Error After Upgrading to Yosemite

When trying to scan using HP Utility after upgrading to Mac OS Yosemite, I receive the following error:
An error occurred while communicating with the HP imaging device. Try the following steps. After each step, try scanning again.
- Turn off and then unplug the device, wait 60 seconds, and plug in and turn on the device.
- Make sure that the device’s power cord and cable are properly attached, plugged in, and the device is on.
- Reboot the computer. Uninstall and reinstall the device.
- Reinstall the HP Scan software that came with the device.
- If you continue to receive this error, you may need to request service for your device.
My computer seems to recognize the device on my wireless network but cannot connect to it. I have tried reinstalling the printer and cycling everything (computer, printer, wireless router) off and on, to no avail. I just upgraded the driver software through Software Update this week.
Any suggestions?

Hi MASTERNC, and thanks for getting back to me!
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would then suggest readding the printer to your system by running your Apple updates: OS X: Updating OS X and Mac App Store apps
Good luck and please let me know how it goes!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Printer connection errors after upgrade - help

After upgrading to 10.5 - any of our printers that were already established are now not accessible. They give the message - "Attempting to connect to host RNPB5FAE6.local. on port 9100" after a while - then unable to connect will retry. If I delete the printer and reestablish via appletalk it will work. If I use bonjour I end up back at the same problem. What happened? Why is this happening?
I have hundreds of computers that I would have to manually reset - there has to be a better solution. Why is bonjour not working?

Hi, i've just search for the same problem. I suddenly cannot print, following trying to print at 1.3mb (only) 20 page InDesign doc ...my printer in another country gave up on the same printing. it too giving me at '13% complete' reading. i was in a rush to get a return flight to the UK but v much think that clicking 'hold' > 'resume' that it would have also given me - 'Attempting to connect to host '...' on port 9100'.
I've been to the mac store after much googling and was advise to re-install the driver when i got back (installation time would have taken too long in the store)
I've emailed you on this thread as i really think you may have the secret to recovery but have to say that your reply baffles me as it's soooo techie :(( ..what's 'pinging'?... I've had a mac for ages though and am pretty good at sorting things generally so would you have any great advice, not uber techie to help me / others in the future? I would v much appreciate it!
Ps. I have Leopard by the way.
thanks,
M

Fix for my iPhone 3Gs WiFi problems after upgrade to iOS 4

Posting incase this helps. I upgraded to iOS 4 on my 3Gs while away from home and came home to find that I couldn't get a reliable connection to my home WiFi which had been rock solid when I left two weeks ago.
My network consistes of a telco supplied router & ADSL box connected by LAN to an Airport Extreme which then connects wirelessly to an Airport Time Machine in another room (actually a steel lined safe room so I have to be sure that the door is open). The Time Machine is set to act as a range extender as is an Airpot Express N I have connected to a hifi.
Well after rebooting everything and scratching my head I took a look at the wireless settings on the base Airport Extreme. *It was set to 802.11n only!* I, therefore, have no idea how my iPhone was able to connect to this up to now. *I've set it now to 802.11n (b/g compatible)* and the iPhone once again connects and re-connects without any trouble at all.
I know the 3Gs is not capable of 802.11n but I can assure you that for the last few months I haven't changed that router so it was certainly working in that 802.11n only mode on that apple router.

Hey, that's a great tip for others who are having issues to check out. Thanks for posting your findings!

Connection error after upgrade to 4.1

Hi -
I have upgraded to 4.1 EA2, but when I connect to 12c pluggable database, which was previously working fine with older version, I am getting the following error.
"An error was encountered performing the requested operation: IO Error: Invalid connection string format, a valid format is: "host:port:sid" Vendor code 17002"
Regards,
Omar

Everything is NOT correct, or we'd be able to connect.
>>Do you still have the older version of SQLDev installed - does the connection still work there?
Or, are you able to connect to your 12c PDB with any other client?
By the way, 12c PDB connections require you use SERVICE, not a SID.
It might help if you show us your connection properties.

HT201210 I continue to get an error 37 message when trying to restore my iphone 3GS which crashed after trying to upload the last update. Does anyone else have this problem?

I continue to get an error 37 message when trying to restore my iphone 3GS which crashed after trying to upload the last update. Does anyone else have this problem?

Did you manage to fix the issue?
I have exactly the same issue as described above : I installed the update 5.1.1 on my iphone 3GS and since then, I can not turn it on anymore. In Itunes, I get an error 37 when I am doing a restauration and it stops.
This error has nothing to do with firewall : I tried to restore the phone on several computers, including in an Apple reseller and it did not work anywhere.
I spent several hours on phone with the hotline from Apple which arrived to the conclusion that it is a hardware issue, but the phone was working perfectly fine until I installed this update!

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran.

Iphone 3gs need activation after update by itune and no service

iphone 3gs need activation after update by itune and no service
what can i do ?

No need to Multiple post... see your other Thread...
https://discussions.apple.com/thread/5846382?tstart=0

Updated iphone 3gs to ios5 after apdation nothing work no network nothing "sim is not installed??" DISAPPOINTED WITH APPLE

updated iphone 3gs to ios5 after apdation nothing work no network nothing "sim is not installed??" DISAPPOINTED WITH APPLE

yes there is a sign on the top of the screen that shows phone is LOCKED....may be that is why the phone didn't recognizing the sim...i think first i need to unlock it again then hopefully phone wil start working again ..but i dont know HOW TO UNLOCK ???...need help from u guys with this .
Actually this is my brother phone who is using in USA ,later he gifted to me , i m using iphone in INDIA now,
when i first insert the sim it was working so well..after couple fo days i tried to update with IOS5 ..after the updation problem coming ALL the Way.....how do i unlock it again , i think its jailbroken now...???
http://ihelpcorner.com/how-to-fix-iphone-3gs-ios-5-05-0-x-searching-or-no-servic e-error-after-updaterestore/
i guess the above link can solve my problem but i didn't try this process on my iphone yet may be it will harm some of iphone applikcations...?? like SOUND LOST. mailing problem etc...the guy who doing the trick in vedio says u need AT&T sim to do it on ur phone..
i dont hv AT&T sim in india i hv airtel sim...what if if i exactly the follow the guy vedio process will my IPHONE unlocked again...with no harm with application ...is it good to do so...? plz let me knw or tell me the genuine procedure.
thnaks for coming in

'Open Itunes When This iPhone Is connected' option disabled by default

since latest upgrade and ios 4.2.1 my itunes has
disabled this option for my iphone 3gs, i dont have option to select or deselect
option 'open itunes when this iphone is connected' it appears dimmed and not
selectable through my itunes. any help?

Yes,.. Open iTunes-Preferences-Devices- then uncheck "Prevent iPods, iPhones, and iPads from syncing automatically". select OK. Done!

I updated my iphone 3gs , but error occured while updating the firmware , now it is in recovery mode. now when i am restoring an error 1015 is coming again while updating the firmware .

i was updating my iphone 3gs , but error occured while itunes was updating firmware. it asked me to revert back to backup. it is in recovery mode. now when i am restoring , again eroor is there while updating firmware part . (1015) . please help what to do . or manually download a update

same thing happened to me. my phone is unlocked. did you have any luck.
please send info.
thank you

Open iTunes when this iPhone is connected

So; i finaly got to update my Mac to 10.6.5. Following a update of iTunes to 10.1. A few days after i recieved my iPhone 4 and updated that one directly from the box to 4.2.1.
The "Open iTunes when this iPhone is connected" are checked.
Prefs->Devices "Prevent iPods, iPhones, and iPads fro.." are NOT checked.
And still iTunes don't start when i plug inn my iPhone. Anyone knows if there are there any fixes for this?

launch *Activity Monitor* and look for a process called iTunesHelper.
iTunesHelper or iTunes Helper, is a program from Apple that runs in the background and monitors for the connection of any iPod or iPhone to the computer
if that process is not present, try *removing iTunes completely* (click here and follow the instructions), then reinstall it using the standalone installer from here: http://www.apple.com/itunes/download/.
note this will not touch your media files, playlists, ratings, etc.
JGG

HT1386 I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that.

I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that. When I open iTunes it has a button that say "Back Up iPhone", but I'm not sure what that does. When I go into the sync options it say I have another user account and asks me if I want to merge of replace. I'm assuming it's trying to tell me I have an older iTunes Library, but don't know that. Geez, maybe people over 60 shouldn't have iPhones, iTunes just bafles me.

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

ITunes 10.5/iPhone 3Gs Connection Errors after upgrade

Similar Messages

Maybe you are looking for